Skipping 416 KB..
Full Log[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=GPRS-NSVC INST=(00,01,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=GPRS-NSVC INST=(00,01,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=GPRS-NSVC INST=(00,01,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_GPRS_NSE_OP(gprs_nse0)[0x6120000042a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_gprs_nse_fsm.c:210)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=GPRS-NSE INST=(00,ff,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=GPRS-NSE INST=(00,ff,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=GPRS-NSE INST=(00,ff,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_BTS_OP(bts0)[0x6120000048a0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bts_sm_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_RCARRIER_OP(bts0-trx0)[0x612000004ba0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bts_fsm.c:50)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_RCARRIER_OP(bts0-trx0)[0x612000004ba0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_radio_carrier_fsm.c:214)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=RADIO-CARRIER INST=(00,00,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_BBTRANSC_OP(bts0-trx0)[0x612000004d20]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bts_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts0)[0x612000004ea0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts0)[0x612000004ea0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,00) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,00) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts1)[0x612000005020]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts1)[0x612000005020]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,01) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,01) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts2)[0x6120000051a0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts2)[0x6120000051a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,02) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,02) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts3)[0x612000005320]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts3)[0x612000005320]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,03) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,03) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts4)[0x6120000054a0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts4)[0x6120000054a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,04) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,04) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts5)[0x612000005620]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts5)[0x612000005620]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,05) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,05) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts6)[0x6120000057a0]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts6)[0x6120000057a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,06) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,06) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts7)[0x612000005920]{DISABLED_NOTINSTALLED}: Received Event SHUTDOWN_FINISH (nm_bb_transc_fsm.c:51)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_CHAN_OP(bts0-trx0-ts7)[0x612000005920]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_channel_fsm.c:232)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,07) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=CHANNEL INST=(00,00,07) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_BBTRANSC_OP(bts0-trx0)[0x612000004d20]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_bb_transc_fsm.c:254)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_BTS_OP(bts0)[0x6120000048a0]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_bts_fsm.c:175)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BTS INST=(00,ff,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BTS INST=(00,ff,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=BTS INST=(00,ff,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m NM_BTS_SM_OP(bts_sm)[0x612000004120]{DISABLED_NOTINSTALLED}: state_chg to DISABLED_NOTINSTALLED (nm_bts_sm_fsm.c:154)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=SITE-MANAGER INST=(ff,ff,ff) AVAIL STATE Not installed -> Not installed (oml.c:687)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=SITE-MANAGER INST=(ff,ff,ff) OPER STATE Disabled -> Disabled (oml.c:695)[0;m
[1;36m[1;32mDOML[0;m[1;36m [1;32mINFO[0;m[1;36m OC=SITE-MANAGER INST=(ff,ff,ff) ADMIN STATE Shutdown -> Locked (oml.c:706)[0;m
[1;32mDABIS[0;m [1;32mINFO[0;m Drop Tx OML msg, OML link is down (abis.c:357)
[1;36m[1;33mDOML[0;m[1;36m [1;33mNOTICE[0;m[1;36m BTS_SHUTDOWN(bts0)[0x612000004720]{EXIT}: Shutdown process completed successfully, exiting process (bts_shutdown_fsm.c:171)[0;m
RESULTS:
pass: ../../../tests/osmo-bts.vty
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making check in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmobts-usermanual.check osmobts-abis.check rtp-amr.check; \
fi
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
if ! [ -f osmobts-usermanual.adoc ]; then \
ln -s osmobts-usermanual.adoc osmobts-usermanual.adoc; \
fi
if ! [ -f osmobts-abis.adoc ]; then \
ln -s osmobts-abis.adoc osmobts-abis.adoc; \
fi
if ! [ -f rtp-amr.adoc ]; then \
ln -s rtp-amr.adoc rtp-amr.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-bts-1.8.0.28-c963f/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmobts-usermanual.adoc > osmobts-usermanual.check 2>&1
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-bts-1.8.0.28-c963f/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmobts-abis.adoc > osmobts-abis.check 2>&1
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-bts-1.8.0.28-c963f/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' rtp-amr.adoc > rtp-amr.check 2>&1
touch rtp-amr.check
touch osmobts-abis.check
touch osmobts-usermanual.check
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making check in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making check in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making install in osmo-bts
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making install in common
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make install-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making install in osmo-bts-virtual
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-virtual /build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-virtual
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making install in osmo-bts-omldummy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-omldummy /build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-omldummy
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making install in osmo-bts-trx
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make install-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[6]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-trx '/build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-trx /build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-trx
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making install in paging
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making install in cipher
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making install in agch
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making install in misc
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making install in handover
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making install in tx_power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making install in power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making install in meas
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making install in ta_control
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making install in amr
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making install in csd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making install in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-trx'
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/trx/osmo-bts-trx.cfg ../../../../doc/examples/trx/osmo-bts-trx-calypso.cfg '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-trx'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg ../../../../doc/examples/trx/osmo-bts-trx.cfg '/build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
[ -n "osmo-bts" ] || exit 1
if [ "" != "1" ]; then \
for i in osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf ; do \
install -vDm644 "$i" "/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc'
'osmobts-usermanual.pdf' -> '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/osmobts-usermanual.pdf'
'osmobts-abis.pdf' -> '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/osmobts-abis.pdf'
'rtp-amr.pdf' -> '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/rtp-amr.pdf'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-bts-virtual.service ../../../../contrib/systemd/osmo-bts-trx.service '/build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making install in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making installcheck in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making installcheck in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making installcheck in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making installcheck in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making installcheck in osmo-bts-trx
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making installcheck in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making installcheck in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making installcheck in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making installcheck in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making installcheck in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making installcheck in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making installcheck in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making installcheck in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making installcheck in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making installcheck in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making installcheck in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-bts-1.8.0.28-c963f/_inst/bin' \
## ----------------------------------- ##
## osmo-bts 1.8.0.28-c963f test suite. ##
## ----------------------------------- ##
Regression tests.
1: paging ok
2: agch ok
3: cipher ok
4: misc ok
5: handover ok
6: ms_power_loop ok
7: bs_power_loop ok
8: tx_power ok
9: meas ok
10: ta_control ok
11: amr ok
12: csd ok
## ------------- ##
## Test results. ##
## ------------- ##
All 12 tests were successful.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making installcheck in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making uninstall in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making uninstall in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making uninstall in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-virtual )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making uninstall in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-omldummy )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making uninstall in osmo-bts-trx
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-trx )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making uninstall in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making uninstall in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making uninstall in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making uninstall in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making uninstall in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making uninstall in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making uninstall in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making uninstall in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making uninstall in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making uninstall in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making uninstall in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual' && rm -f osmo-bts-virtual.cfg )
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-trx' && rm -f osmo-bts-trx.cfg osmo-bts-trx-calypso.cfg )
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom' && rm -f osmo-bts-virtual.cfg osmo-bts-trx.cfg )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
[ -n "osmo-bts" ] || exit 1
if [ "" != "1" ]; then \
for i in osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf ; do \
rm -v "/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/$i"; \
done; \
fi
removed '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/osmobts-usermanual.pdf'
removed '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/osmobts-abis.pdf'
removed '/build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/rtp-amr.pdf'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
( cd '/build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system' && rm -f osmo-bts-virtual.service osmo-bts-trx.service )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making uninstall in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making install in osmo-bts
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making install in common
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make install-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making install in osmo-bts-virtual
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-virtual /tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-virtual
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making install in osmo-bts-omldummy
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-omldummy /tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-omldummy
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making install in osmo-bts-trx
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make install-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[6]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-trx '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin'
libtool: install: /usr/bin/install -c osmo-bts-trx /tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin/osmo-bts-trx
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making install in paging
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making install in cipher
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making install in agch
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making install in misc
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making install in handover
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making install in tx_power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making install in power
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making install in meas
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making install in ta_control
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making install in amr
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making install in csd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making install in doc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-trx'
/usr/bin/mkdir -p '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom'
/usr/bin/mkdir -p '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/install -c -m 644 ../../../../doc/examples/trx/osmo-bts-trx.cfg ../../../../doc/examples/trx/osmo-bts-trx-calypso.cfg '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-trx'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg ../../../../doc/examples/trx/osmo-bts-trx.cfg '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/virtual/osmo-bts-virtual.cfg '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
[ -n "osmo-bts" ] || exit 1
if [ "" != "1" ]; then \
for i in osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf ; do \
install -vDm644 "$i" "/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/$i" || exit 1; \
done; \
fi
install: creating directory '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc'
'osmobts-usermanual.pdf' -> '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/osmobts-usermanual.pdf'
'osmobts-abis.pdf' -> '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/osmobts-abis.pdf'
'rtp-amr.pdf' -> '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/rtp-amr.pdf'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making install in contrib
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-bts-virtual.service ../../../../contrib/systemd/osmo-bts-trx.service '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making install in ber
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making uninstall in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making uninstall in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making uninstall in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
( cd '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-virtual )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making uninstall in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
( cd '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-omldummy )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making uninstall in osmo-bts-trx
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
( cd '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/bin' && rm -f osmo-bts-trx )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making uninstall in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making uninstall in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making uninstall in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making uninstall in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making uninstall in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making uninstall in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making uninstall in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making uninstall in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making uninstall in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making uninstall in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making uninstall in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
( cd '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-virtual' && rm -f osmo-bts-virtual.cfg )
( cd '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts/examples/osmo-bts-trx' && rm -f osmo-bts-trx.cfg osmo-bts-trx-calypso.cfg )
( cd '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/etc/osmocom' && rm -f osmo-bts-virtual.cfg osmo-bts-trx.cfg )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
[ -n "osmo-bts" ] || exit 1
if [ "" != "1" ]; then \
for i in osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf ; do \
rm -v "/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/$i"; \
done; \
fi
removed '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/osmobts-usermanual.pdf'
removed '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/osmobts-abis.pdf'
removed '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst/share/doc/osmo-bts-doc/rtp-amr.pdf'
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-45216//build/osmo-bts-1.8.0.28-c963f/_inst//lib/systemd/system' && rm -f osmo-bts-virtual.service osmo-bts-trx.service )
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making uninstall in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
if test -d "osmo-bts-1.8.0.28-c963f"; then find "osmo-bts-1.8.0.28-c963f" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.28-c963f" || { sleep 5 && rm -rf "osmo-bts-1.8.0.28-c963f"; }; else :; fi
test -d "osmo-bts-1.8.0.28-c963f" || mkdir "osmo-bts-1.8.0.28-c963f"
(cd include && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
(cd osmo-bts && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/include/osmo-bts \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
(cd src && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
(cd common && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/common \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
(cd osmo-bts-virtual && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-virtual \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
(cd osmo-bts-omldummy && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-omldummy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
(cd osmo-bts-sysmo && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-sysmo \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
(cd osmo-bts-trx && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-trx \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
(cd osmo-bts-octphy && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-octphy \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
(cd osmo-bts-lc15 && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-lc15 \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
(cd osmo-bts-oc2g && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/src/osmo-bts-oc2g \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
(cd tests && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
(cd paging && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/paging \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
(cd cipher && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/cipher \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
(cd agch && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/agch \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
(cd misc && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/misc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
(cd handover && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/handover \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
(cd tx_power && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/tx_power \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
(cd power && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/power \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
(cd meas && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/meas \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
(cd ta_control && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/ta_control \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
(cd amr && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/amr \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
(cd csd && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/csd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
(cd sysmobts && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/tests/sysmobts \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
(cd doc && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
(cd contrib && make top_distdir=../osmo-bts-1.8.0.28-c963f distdir=../osmo-bts-1.8.0.28-c963f/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
(cd ber && make top_distdir=../../osmo-bts-1.8.0.28-c963f distdir=../../osmo-bts-1.8.0.28-c963f/contrib/ber \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make distdir-am
make[7]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[7]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[6]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[5]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make \
top_distdir="osmo-bts-1.8.0.28-c963f" distdir="osmo-bts-1.8.0.28-c963f" \
dist-hook
make[4]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
echo 1.8.0.28-c963f > osmo-bts-1.8.0.28-c963f/.tarball-version
make[4]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
test -n "" \
|| find "osmo-bts-1.8.0.28-c963f" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-bts-1.8.0.28-c963f/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-bts-1.8.0.28-c963f"
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
tardir=osmo-bts-1.8.0.28-c963f && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-bts-1.8.0.28-c963f.tar.bz2
tardir=osmo-bts-1.8.0.28-c963f && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-bts-1.8.0.28-c963f.tar.gz
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
if test -d "osmo-bts-1.8.0.28-c963f"; then find "osmo-bts-1.8.0.28-c963f" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.28-c963f" || { sleep 5 && rm -rf "osmo-bts-1.8.0.28-c963f"; }; else :; fi
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
make[1]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making distclean in osmo-bts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../include/osmo-bts" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making distclean in common
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
rm -rf .libs _libs
test -z "libbts.a libl1sched.a" || rm -f libbts.a libl1sched.a
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/common" || test -z "" || rm -f
rm -f ./.deps/abis.Po
rm -f ./.deps/abis_osmo.Po
rm -f ./.deps/amr.Po
rm -f ./.deps/asci.Po
rm -f ./.deps/bts.Po
rm -f ./.deps/bts_ctrl_commands.Po
rm -f ./.deps/bts_ctrl_lookup.Po
rm -f ./.deps/bts_shutdown_fsm.Po
rm -f ./.deps/bts_sm.Po
rm -f ./.deps/bts_trx.Po
rm -f ./.deps/cbch.Po
rm -f ./.deps/csd_rlp.Po
rm -f ./.deps/csd_v110.Po
rm -f ./.deps/dtx_dl_amr_fsm.Po
rm -f ./.deps/gsm_data.Po
rm -f ./.deps/handover.Po
rm -f ./.deps/l1sap.Po
rm -f ./.deps/lchan.Po
rm -f ./.deps/load_indication.Po
rm -f ./.deps/logging.Po
rm -f ./.deps/main.Po
rm -f ./.deps/measurement.Po
rm -f ./.deps/msg_utils.Po
rm -f ./.deps/nm_bb_transc_fsm.Po
rm -f ./.deps/nm_bts_fsm.Po
rm -f ./.deps/nm_bts_sm_fsm.Po
rm -f ./.deps/nm_channel_fsm.Po
rm -f ./.deps/nm_common_fsm.Po
rm -f ./.deps/nm_gprs_cell_fsm.Po
rm -f ./.deps/nm_gprs_nse_fsm.Po
rm -f ./.deps/nm_gprs_nsvc_fsm.Po
rm -f ./.deps/nm_radio_carrier_fsm.Po
rm -f ./.deps/notification.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/osmux.Po
rm -f ./.deps/paging.Po
rm -f ./.deps/pcu_sock.Po
rm -f ./.deps/phy_link.Po
rm -f ./.deps/power_control.Po
rm -f ./.deps/rsl.Po
rm -f ./.deps/rtp_input_preen.Po
rm -f ./.deps/scheduler.Po
rm -f ./.deps/scheduler_mframe.Po
rm -f ./.deps/sysinfo.Po
rm -f ./.deps/ta_control.Po
rm -f ./.deps/tx_power.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/common'
Making distclean in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-virtual
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-virtual" || test -z "" || rm -f
rm -f ./.deps/bts_model.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/osmo_mcast_sock.Po
rm -f ./.deps/scheduler_virtbts.Po
rm -f ./.deps/virtual_um.Po
rm -f ./.deps/virtualbts_vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-virtual'
Making distclean in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-omldummy
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-omldummy" || test -z "" || rm -f
rm -f ./.deps/bts_model.Po
rm -f ./.deps/main.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-omldummy'
Making distclean in osmo-bts-sysmo
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-sysmo" || test -z "" || rm -f
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_fwd_main.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_fwd.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts-calib.Po
rm -f ./.deps/sysmobts-layer1.Po
rm -f ./.deps/sysmobts_ctrl.Po
rm -f ./.deps/sysmobts_mgr.Po
rm -f ./.deps/sysmobts_mgr_2050.Po
rm -f ./.deps/sysmobts_mgr_calib.Po
rm -f ./.deps/sysmobts_mgr_nl.Po
rm -f ./.deps/sysmobts_mgr_temp.Po
rm -f ./.deps/sysmobts_mgr_vty.Po
rm -f ./.deps/sysmobts_misc.Po
rm -f ./.deps/sysmobts_nl.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_util.Po
rm -f ./.deps/sysmobts_vty.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-sysmo'
Making distclean in osmo-bts-trx
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-trx
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-trx" || test -z "" || rm -f
rm -f ./.deps/amr_loop.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/sched_lchan_fcch_sch.Po
rm -f ./.deps/sched_lchan_pdtch.Po
rm -f ./.deps/sched_lchan_rach.Po
rm -f ./.deps/sched_lchan_tchf.Po
rm -f ./.deps/sched_lchan_tchh.Po
rm -f ./.deps/sched_lchan_xcch.Po
rm -f ./.deps/scheduler_trx.Po
rm -f ./.deps/trx_if.Po
rm -f ./.deps/trx_provision_fsm.Po
rm -f ./.deps/trx_vty.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-trx'
Making distclean in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-octphy
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-octphy" || test -z "" || rm -f
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_oml.Po
rm -f ./.deps/l1_tch.Po
rm -f ./.deps/l1_utils.Po
rm -f ./.deps/main.Po
rm -f ./.deps/octphy_hw_api.Po
rm -f ./.deps/octphy_vty.Po
rm -f ./.deps/octpkt.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-octphy'
Making distclean in osmo-bts-lc15
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-lc15 lc15bts-mgr lc15bts-util
rm -f *.tab.c
test -z "" || rm -f
rm -f misc/*.o
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-lc15" || test -z "" || rm -f
rm -f misc/.deps/.dirstamp
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/lc15bts.Po
rm -f ./.deps/lc15bts_vty.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/lc15bts_bid.Po
rm -f misc/.deps/lc15bts_bts.Po
rm -f misc/.deps/lc15bts_clock.Po
rm -f misc/.deps/lc15bts_led.Po
rm -f misc/.deps/lc15bts_mgr.Po
rm -f misc/.deps/lc15bts_mgr_calib.Po
rm -f misc/.deps/lc15bts_mgr_nl.Po
rm -f misc/.deps/lc15bts_mgr_temp.Po
rm -f misc/.deps/lc15bts_mgr_vty.Po
rm -f misc/.deps/lc15bts_misc.Po
rm -f misc/.deps/lc15bts_nl.Po
rm -f misc/.deps/lc15bts_par.Po
rm -f misc/.deps/lc15bts_power.Po
rm -f misc/.deps/lc15bts_swd.Po
rm -f misc/.deps/lc15bts_temp.Po
rm -f misc/.deps/lc15bts_util.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-lc15'
Making distclean in osmo-bts-oc2g
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-oc2g oc2gbts-mgr oc2gbts-util
rm -f *.tab.c
rm -f misc/*.o
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../src/osmo-bts-oc2g" || test -z "" || rm -f
rm -f misc/.deps/.dirstamp
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oc2gbts.Po
rm -f ./.deps/oc2gbts_vty.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/oc2gbts_bid.Po
rm -f misc/.deps/oc2gbts_bts.Po
rm -f misc/.deps/oc2gbts_clock.Po
rm -f misc/.deps/oc2gbts_led.Po
rm -f misc/.deps/oc2gbts_mgr.Po
rm -f misc/.deps/oc2gbts_mgr_calib.Po
rm -f misc/.deps/oc2gbts_mgr_nl.Po
rm -f misc/.deps/oc2gbts_mgr_temp.Po
rm -f misc/.deps/oc2gbts_mgr_vty.Po
rm -f misc/.deps/oc2gbts_misc.Po
rm -f misc/.deps/oc2gbts_nl.Po
rm -f misc/.deps/oc2gbts_par.Po
rm -f misc/.deps/oc2gbts_power.Po
rm -f misc/.deps/oc2gbts_swd.Po
rm -f misc/.deps/oc2gbts_temp.Po
rm -f misc/.deps/oc2gbts_util.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src/osmo-bts-oc2g'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../src" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/src'
Making distclean in tests
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making distclean in paging
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f paging_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/paging" || test -z "" || rm -f
rm -f ./.deps/paging_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/paging'
Making distclean in cipher
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f cipher_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/cipher" || test -z "" || rm -f
rm -f ./.deps/cipher_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/cipher'
Making distclean in agch
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f agch_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/agch" || test -z "" || rm -f
rm -f ./.deps/agch_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/agch'
Making distclean in misc
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f misc_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/misc" || test -z "" || rm -f
rm -f ./.deps/misc_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/misc'
Making distclean in handover
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f handover_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/handover" || test -z "" || rm -f
rm -f ./.deps/handover_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/handover'
Making distclean in tx_power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f tx_power_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/tx_power" || test -z "" || rm -f
rm -f ./.deps/stubs.Po
rm -f ./.deps/tx_power_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/tx_power'
Making distclean in power
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f ms_power_loop_test bs_power_loop_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/power" || test -z "" || rm -f
rm -f ./.deps/bs_power_loop_test.Po
rm -f ./.deps/ms_power_loop_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/power'
Making distclean in meas
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f meas_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/meas" || test -z "" || rm -f
rm -f ./.deps/meas_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/meas'
Making distclean in ta_control
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f ta_control_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/ta_control" || test -z "" || rm -f
rm -f ./.deps/ta_control_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/ta_control'
Making distclean in amr
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f amr_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/amr" || test -z "" || rm -f
rm -f ./.deps/amr_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/amr'
Making distclean in csd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f csd_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/csd" || test -z "" || rm -f
rm -f ./.deps/csd_test.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/csd'
Making distclean in sysmobts
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f sysmobts_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../tests/sysmobts" || test -z "" || rm -f
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_test.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests/sysmobts'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.lo
test -z "" || rm -f
test . = "../../../tests" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test -z "atconfig" || rm -f atconfig
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/tests'
Making distclean in doc
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/examples" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/manuals" || test -z "" || rm -f
rm -rf osmobts-usermanual__*.png osmobts-abis__*.png rtp-amr__*.png osmobts-usermanual__*.svg osmobts-abis__*.svg rtp-amr__*.svg osmobts-usermanual.check osmobts-abis.check rtp-amr.check osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf osmobts-usermanual.html osmobts-abis.html rtp-amr.html vty/osmobts-virtual-vty-reference.pdf vty/osmobts-trx-vty-reference.pdf vty/osmobts-virtual-vty-reference.lint vty/osmobts-trx-vty-reference.lint vty/osmobts-virtual-vty-reference.xml vty/osmobts-trx-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-trx-vty-reference.xml.inc vty/osmobts-virtual-vty-reference.xml.inc.gen vty/osmobts-trx-vty-reference.xml.inc.gen vty/osmobts-virtual-vty-reference.xml.inc.merged vty/osmobts-trx-vty-reference.xml.inc.merged common build generated/.pdf_shrink_marker
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/doc'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../contrib/systemd" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/systemd'
Making distclean in ber
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f rtp_ber rtp_gen_map
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../../contrib/ber" || test -z "" || rm -f
rm -f ./.deps/rtp_ber.Po
rm -f ./.deps/rtp_gen_map.Po
rm -f Makefile
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib/ber'
make[3]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f btsconfig.h stamp-h1
rm -f libtool config.lt
test . = "../.." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-bts-1.8.0.28-c963f/_build/sub'
if test -d "osmo-bts-1.8.0.28-c963f"; then find "osmo-bts-1.8.0.28-c963f" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.8.0.28-c963f" || { sleep 5 && rm -rf "osmo-bts-1.8.0.28-c963f"; }; else :; fi
=========================================================
osmo-bts-1.8.0.28-c963f archives ready for distribution:
osmo-bts-1.8.0.28-c963f.tar.gz
osmo-bts-1.8.0.28-c963f.tar.bz2
=========================================================
+ [ 1 = 1 ]
+ [ 1 = 1 ]
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
sed -e "s|@@GENERATED@@|vty/osmobts-virtual-vty-reference.xml.inc|" \
-e "s|@@VARIANT@@|osmo-bts-virtual|" \
-e "s|@@REV_NUMBER@@|1.8.0.28-c963f|" \
-e "s|@@REV_DATE@@|03th December 2024|" \
-e "s|@@CR_YEAR@@|2024|" \
./vty/osmobts-vty-reference.xml > vty/osmobts-virtual-vty-reference.xml
xmllint --xinclude --postvalid --noout vty/osmobts-virtual-vty-reference.xml
sed -e "s|@@GENERATED@@|vty/osmobts-trx-vty-reference.xml.inc|" \
-e "s|@@VARIANT@@|osmo-bts-trx|" \
-e "s|@@REV_NUMBER@@|1.8.0.28-c963f|" \
-e "s|@@REV_DATE@@|03th December 2024|" \
-e "s|@@CR_YEAR@@|2024|" \
./vty/osmobts-vty-reference.xml > vty/osmobts-trx-vty-reference.xml
# a) Invoke osmo-bts-% to generate the list of commands first
../../src/osmo-bts-virtual/osmo-bts-virtual --vty-ref-mode default --vty-ref-xml > "vty/osmobts-virtual-vty-reference.xml.inc.gen"
Generating the VTY reference in mode 'default' (all commands except deprecated and hidden)
# ... filter garbage potentially printed by libraries to stdout
sed -i '/^<vtydoc/,$!d' "vty/osmobts-virtual-vty-reference.xml.inc.gen"
# b) Merge the result of a) with global and local additions
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh \
/opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-virtual-vty-reference.xml.inc.gen" \
/opt/osmo-gsm-manuals/common/vty_additions.xml \
./vty/*additions*.xml > "vty/osmobts-virtual-vty-reference.xml.inc.merged"
+ mktemp
+ combined=/tmp/tmp.gm8zSHZi9w
+ mktemp
+ combine_src=/tmp/tmp.ybXEJeoWYx
+ cp vty/osmobts-virtual-vty-reference.xml.inc.gen /tmp/tmp.gm8zSHZi9w
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.gm8zSHZi9w /tmp/tmp.ybXEJeoWYx
+ xsltproc -o /tmp/tmp.gm8zSHZi9w --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.ybXEJeoWYx
+ [ -n ./vty/bts_vty_additions.xml ]
+ realpath ./vty/bts_vty_additions.xml
+ addition=/build/doc/manuals/vty/bts_vty_additions.xml
+ shift
+ cp /tmp/tmp.gm8zSHZi9w /tmp/tmp.ybXEJeoWYx
+ xsltproc -o /tmp/tmp.gm8zSHZi9w --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.ybXEJeoWYx
+ [ -n ]
+ cat /tmp/tmp.gm8zSHZi9w
+ rm -f /tmp/tmp.ybXEJeoWYx
+ rm -f /tmp/tmp.gm8zSHZi9w
# c) Convert the result of b) into a valid docbook
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-virtual-vty-reference.xml.inc.merged" > vty/osmobts-virtual-vty-reference.xml.inc
# a) Invoke osmo-bts-% to generate the list of commands first
../../src/osmo-bts-trx/osmo-bts-trx --vty-ref-mode default --vty-ref-xml > "vty/osmobts-trx-vty-reference.xml.inc.gen"
Generating the VTY reference in mode 'default' (all commands except deprecated and hidden)
# ... filter garbage potentially printed by libraries to stdout
sed -i '/^<vtydoc/,$!d' "vty/osmobts-trx-vty-reference.xml.inc.gen"
# b) Merge the result of a) with global and local additions
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh \
/opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-trx-vty-reference.xml.inc.gen" \
/opt/osmo-gsm-manuals/common/vty_additions.xml \
./vty/*additions*.xml > "vty/osmobts-trx-vty-reference.xml.inc.merged"
+ mktemp
+ combined=/tmp/tmp.IhPiEZUUru
+ mktemp
+ combine_src=/tmp/tmp.Vu3DJfNkjJ
+ cp vty/osmobts-trx-vty-reference.xml.inc.gen /tmp/tmp.IhPiEZUUru
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.IhPiEZUUru /tmp/tmp.Vu3DJfNkjJ
+ xsltproc -o /tmp/tmp.IhPiEZUUru --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.Vu3DJfNkjJ
+ [ -n ./vty/bts_vty_additions.xml ]
+ realpath ./vty/bts_vty_additions.xml
+ addition=/build/doc/manuals/vty/bts_vty_additions.xml
+ shift
+ cp /tmp/tmp.IhPiEZUUru /tmp/tmp.Vu3DJfNkjJ
+ xsltproc -o /tmp/tmp.IhPiEZUUru --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.Vu3DJfNkjJ
+ [ -n ]
+ cat /tmp/tmp.IhPiEZUUru
+ rm -f /tmp/tmp.Vu3DJfNkjJ
+ rm -f /tmp/tmp.IhPiEZUUru
# c) Convert the result of b) into a valid docbook
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-trx-vty-reference.xml.inc.merged" > vty/osmobts-trx-vty-reference.xml.inc
set -x && \
export GIT_DATE="2024-Jul-19" && \
export REVNUMBER="DRAFT 1.8.0-28-gc963f" && \
export TEMPFILE="/build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml" && \
/opt/osmo-gsm-manuals/build/docbook-set-revhistory.py "vty/osmobts-virtual-vty-reference.xml" && \
dblatex \
--config /opt/osmo-gsm-manuals/build/dblatex_config.xml \
--xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \
\
-P draft.mode=no \
-o vty/osmobts-virtual-vty-reference.pdf \
"$TEMPFILE" && \
rm $TEMPFILE
+ export GIT_DATE=2024-Jul-19
+ GIT_DATE=2024-Jul-19
+ export 'REVNUMBER=DRAFT 1.8.0-28-gc963f'
+ REVNUMBER='DRAFT 1.8.0-28-gc963f'
+ export TEMPFILE=/build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml
+ TEMPFILE=/build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml
+ /opt/osmo-gsm-manuals/build/docbook-set-revhistory.py vty/osmobts-virtual-vty-reference.xml
Changing revhistory to DRAFT 1.8.0-28-gc963f, 2024-Jul-19...
+ dblatex --config /opt/osmo-gsm-manuals/build/dblatex_config.xml '--xslt-opts=--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty' -P draft.mode=no -o vty/osmobts-virtual-vty-reference.pdf /build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml
Build the book set list...
Build the listings...
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
Build _temp_osmobts-virtual-vty-reference.pdf
'osmobts-virtual-vty-reference.pdf' successfully built
+ rm /build/doc/manuals/vty/_temp_osmobts-virtual-vty-reference.xml
xmllint --xinclude --postvalid --noout vty/osmobts-trx-vty-reference.xml
set -x && \
export GIT_DATE="2024-Jul-19" && \
export REVNUMBER="DRAFT 1.8.0-28-gc963f" && \
export TEMPFILE="/build/doc/manuals/vty/_temp_osmobts-trx-vty-reference.xml" && \
/opt/osmo-gsm-manuals/build/docbook-set-revhistory.py "vty/osmobts-trx-vty-reference.xml" && \
dblatex \
--config /opt/osmo-gsm-manuals/build/dblatex_config.xml \
--xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \
\
-P draft.mode=no \
-o vty/osmobts-trx-vty-reference.pdf \
"$TEMPFILE" && \
rm $TEMPFILE
+ export GIT_DATE=2024-Jul-19
+ GIT_DATE=2024-Jul-19
+ export 'REVNUMBER=DRAFT 1.8.0-28-gc963f'
+ REVNUMBER='DRAFT 1.8.0-28-gc963f'
+ export TEMPFILE=/build/doc/manuals/vty/_temp_osmobts-trx-vty-reference.xml
+ TEMPFILE=/build/doc/manuals/vty/_temp_osmobts-trx-vty-reference.xml
+ /opt/osmo-gsm-manuals/build/docbook-set-revhistory.py vty/osmobts-trx-vty-reference.xml
Changing revhistory to DRAFT 1.8.0-28-gc963f, 2024-Jul-19...
+ dblatex --config /opt/osmo-gsm-manuals/build/dblatex_config.xml '--xslt-opts=--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty' -P draft.mode=no -o vty/osmobts-trx-vty-reference.pdf /build/doc/manuals/vty/_temp_osmobts-trx-vty-reference.xml
Build the book set list...
Build the listings...
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
Build _temp_osmobts-trx-vty-reference.pdf
'osmobts-trx-vty-reference.pdf' successfully built
+ rm /build/doc/manuals/vty/_temp_osmobts-trx-vty-reference.xml
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-trx-vty-reference.pdf
* osmobts-usermanual.pdf: 888K
* osmobts-abis.pdf: 504K
* rtp-amr.pdf: 444K
* vty/osmobts-virtual-vty-reference.pdf: 288K
* vty/osmobts-trx-vty-reference.pdf: 300K
[ -n "osmo-bts" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-bts/master"
cp osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-trx-vty-reference.pdf "_publish_tmpdir/osmo-bts/master"
cd "_publish_tmpdir" && \
rsync \
-avzR \
-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
"osmo-bts" \
docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-bts/
osmo-bts/master/
osmo-bts/master/osmobts-abis.pdf
osmo-bts/master/osmobts-trx-vty-reference.pdf
osmo-bts/master/osmobts-usermanual.pdf
osmo-bts/master/osmobts-virtual-vty-reference.pdf
osmo-bts/master/rtp-amr.pdf
sent 49,035 bytes received 19,191 bytes 45,484.00 bytes/sec
total size is 2,472,257 speedup is 36.24
rm -rf "_publish_tmpdir"
rm vty/osmobts-trx-vty-reference.xml.inc vty/osmobts-trx-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc
make: Leaving directory '/build/doc/manuals'
+ make -j 4 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
Making maintainer-clean in osmo-bts
make[2]: Entering directory '/build/include/osmo-bts'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/include/osmo-bts'
make[2]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/include'
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
Making maintainer-clean in common
make[2]: Entering directory '/build/src/common'
rm -rf .libs _libs
test -z "libbts.a libl1sched.a" || rm -f libbts.a libl1sched.a
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f ./.deps/abis.Po
rm -f ./.deps/abis_osmo.Po
rm -f ./.deps/amr.Po
rm -f ./.deps/asci.Po
rm -f ./.deps/bts.Po
rm -f ./.deps/bts_ctrl_commands.Po
rm -f ./.deps/bts_ctrl_lookup.Po
rm -f ./.deps/bts_shutdown_fsm.Po
rm -f ./.deps/bts_sm.Po
rm -f ./.deps/bts_trx.Po
rm -f ./.deps/cbch.Po
rm -f ./.deps/csd_rlp.Po
rm -f ./.deps/csd_v110.Po
rm -f ./.deps/dtx_dl_amr_fsm.Po
rm -f ./.deps/gsm_data.Po
rm -f ./.deps/handover.Po
rm -f ./.deps/l1sap.Po
rm -f ./.deps/lchan.Po
rm -f ./.deps/load_indication.Po
rm -f ./.deps/logging.Po
rm -f ./.deps/main.Po
rm -f ./.deps/measurement.Po
rm -f ./.deps/msg_utils.Po
rm -f ./.deps/nm_bb_transc_fsm.Po
rm -f ./.deps/nm_bts_fsm.Po
rm -f ./.deps/nm_bts_sm_fsm.Po
rm -f ./.deps/nm_channel_fsm.Po
rm -f ./.deps/nm_common_fsm.Po
rm -f ./.deps/nm_gprs_cell_fsm.Po
rm -f ./.deps/nm_gprs_nse_fsm.Po
rm -f ./.deps/nm_gprs_nsvc_fsm.Po
rm -f ./.deps/nm_radio_carrier_fsm.Po
rm -f ./.deps/notification.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/osmux.Po
rm -f ./.deps/paging.Po
rm -f ./.deps/pcu_sock.Po
rm -f ./.deps/phy_link.Po
rm -f ./.deps/power_control.Po
rm -f ./.deps/rsl.Po
rm -f ./.deps/rtp_input_preen.Po
rm -f ./.deps/scheduler.Po
rm -f ./.deps/scheduler_mframe.Po
rm -f ./.deps/sysinfo.Po
rm -f ./.deps/ta_control.Po
rm -f ./.deps/tx_power.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/common'
Making maintainer-clean in osmo-bts-virtual
make[2]: Entering directory '/build/src/osmo-bts-virtual'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-virtual
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bts_model.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/osmo_mcast_sock.Po
rm -f ./.deps/scheduler_virtbts.Po
rm -f ./.deps/virtual_um.Po
rm -f ./.deps/virtualbts_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-virtual'
Making maintainer-clean in osmo-bts-omldummy
make[2]: Entering directory '/build/src/osmo-bts-omldummy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-omldummy
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bts_model.Po
rm -f ./.deps/main.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-omldummy'
Making maintainer-clean in osmo-bts-sysmo
make[2]: Entering directory '/build/src/osmo-bts-sysmo'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-sysmo osmo-bts-sysmo-remote l1fwd-proxy sysmobts-mgr sysmobts-util
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_fwd_main.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_fwd.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts-calib.Po
rm -f ./.deps/sysmobts-layer1.Po
rm -f ./.deps/sysmobts_ctrl.Po
rm -f ./.deps/sysmobts_mgr.Po
rm -f ./.deps/sysmobts_mgr_2050.Po
rm -f ./.deps/sysmobts_mgr_calib.Po
rm -f ./.deps/sysmobts_mgr_nl.Po
rm -f ./.deps/sysmobts_mgr_temp.Po
rm -f ./.deps/sysmobts_mgr_vty.Po
rm -f ./.deps/sysmobts_misc.Po
rm -f ./.deps/sysmobts_nl.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_util.Po
rm -f ./.deps/sysmobts_vty.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-sysmo'
Making maintainer-clean in osmo-bts-trx
make[2]: Entering directory '/build/src/osmo-bts-trx'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-trx
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "" || rm -f
rm -f ./.deps/amr_loop.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/main.Po
rm -f ./.deps/sched_lchan_fcch_sch.Po
rm -f ./.deps/sched_lchan_pdtch.Po
rm -f ./.deps/sched_lchan_rach.Po
rm -f ./.deps/sched_lchan_tchf.Po
rm -f ./.deps/sched_lchan_tchh.Po
rm -f ./.deps/sched_lchan_xcch.Po
rm -f ./.deps/scheduler_trx.Po
rm -f ./.deps/trx_if.Po
rm -f ./.deps/trx_provision_fsm.Po
rm -f ./.deps/trx_vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-trx'
Making maintainer-clean in osmo-bts-octphy
make[2]: Entering directory '/build/src/osmo-bts-octphy'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-octphy
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_oml.Po
rm -f ./.deps/l1_tch.Po
rm -f ./.deps/l1_utils.Po
rm -f ./.deps/main.Po
rm -f ./.deps/octphy_hw_api.Po
rm -f ./.deps/octphy_vty.Po
rm -f ./.deps/octpkt.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-octphy'
Making maintainer-clean in osmo-bts-lc15
make[2]: Entering directory '/build/src/osmo-bts-lc15'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-lc15 lc15bts-mgr lc15bts-util
rm -f *.tab.c
test -z "" || rm -f
rm -f misc/*.o
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
rm -f misc/.deps/.dirstamp
it deletes files that may require special tools to rebuild.
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/lc15bts.Po
rm -f ./.deps/lc15bts_vty.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/lc15bts_bid.Po
rm -f misc/.deps/lc15bts_bts.Po
rm -f misc/.deps/lc15bts_clock.Po
rm -f misc/.deps/lc15bts_led.Po
rm -f misc/.deps/lc15bts_mgr.Po
rm -f misc/.deps/lc15bts_mgr_calib.Po
rm -f misc/.deps/lc15bts_mgr_nl.Po
rm -f misc/.deps/lc15bts_mgr_temp.Po
rm -f misc/.deps/lc15bts_mgr_vty.Po
rm -f misc/.deps/lc15bts_misc.Po
rm -f misc/.deps/lc15bts_nl.Po
rm -f misc/.deps/lc15bts_par.Po
rm -f misc/.deps/lc15bts_power.Po
rm -f misc/.deps/lc15bts_swd.Po
rm -f misc/.deps/lc15bts_temp.Po
rm -f misc/.deps/lc15bts_util.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-lc15'
Making maintainer-clean in osmo-bts-oc2g
make[2]: Entering directory '/build/src/osmo-bts-oc2g'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f osmo-bts-oc2g oc2gbts-mgr oc2gbts-util
rm -f misc/*.o
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
rm -f misc/.deps/.dirstamp
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f misc/.dirstamp
rm -f ./.deps/calib_file.Po
rm -f ./.deps/hw_misc.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/main.Po
rm -f ./.deps/oc2gbts.Po
rm -f ./.deps/oc2gbts_vty.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f misc/.deps/oc2gbts_bid.Po
rm -f misc/.deps/oc2gbts_bts.Po
rm -f misc/.deps/oc2gbts_clock.Po
rm -f misc/.deps/oc2gbts_led.Po
rm -f misc/.deps/oc2gbts_mgr.Po
rm -f misc/.deps/oc2gbts_mgr_calib.Po
rm -f misc/.deps/oc2gbts_mgr_nl.Po
rm -f misc/.deps/oc2gbts_mgr_temp.Po
rm -f misc/.deps/oc2gbts_mgr_vty.Po
rm -f misc/.deps/oc2gbts_misc.Po
rm -f misc/.deps/oc2gbts_nl.Po
rm -f misc/.deps/oc2gbts_par.Po
rm -f misc/.deps/oc2gbts_power.Po
rm -f misc/.deps/oc2gbts_swd.Po
rm -f misc/.deps/oc2gbts_temp.Po
rm -f misc/.deps/oc2gbts_util.Po
rm -f Makefile
make[2]: Leaving directory '/build/src/osmo-bts-oc2g'
make[2]: Entering directory '/build/src'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/src'
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
Making maintainer-clean in paging
make[2]: Entering directory '/build/tests/paging'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f paging_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/paging_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/paging'
Making maintainer-clean in cipher
make[2]: Entering directory '/build/tests/cipher'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f cipher_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/cipher_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/cipher'
Making maintainer-clean in agch
make[2]: Entering directory '/build/tests/agch'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f agch_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/agch_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/agch'
Making maintainer-clean in misc
make[2]: Entering directory '/build/tests/misc'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f misc_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/misc_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/misc'
Making maintainer-clean in handover
make[2]: Entering directory '/build/tests/handover'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f handover_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/handover_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/handover'
Making maintainer-clean in tx_power
make[2]: Entering directory '/build/tests/tx_power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f tx_power_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/stubs.Po
rm -f ./.deps/tx_power_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/tx_power'
Making maintainer-clean in power
make[2]: Entering directory '/build/tests/power'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f ms_power_loop_test bs_power_loop_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/bs_power_loop_test.Po
rm -f ./.deps/ms_power_loop_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/power'
Making maintainer-clean in meas
make[2]: Entering directory '/build/tests/meas'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f meas_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/meas_test.Po
rm -f ./.deps/stubs.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/meas'
Making maintainer-clean in ta_control
make[2]: Entering directory '/build/tests/ta_control'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f ta_control_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/ta_control_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/ta_control'
Making maintainer-clean in amr
make[2]: Entering directory '/build/tests/amr'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f amr_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/amr_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/amr'
Making maintainer-clean in csd
make[2]: Entering directory '/build/tests/csd'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f csd_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/csd_test.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/csd'
Making maintainer-clean in sysmobts
make[2]: Entering directory '/build/tests/sysmobts'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f sysmobts_test
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/calib_file.Po
rm -f ./.deps/calib_fixup.Po
rm -f ./.deps/eeprom.Po
rm -f ./.deps/femtobts.Po
rm -f ./.deps/l1_if.Po
rm -f ./.deps/l1_transp_hw.Po
rm -f ./.deps/oml.Po
rm -f ./.deps/sysmobts_par.Po
rm -f ./.deps/sysmobts_test.Po
rm -f ./.deps/tch.Po
rm -f ./.deps/utils.Po
rm -f Makefile
make[2]: Leaving directory '/build/tests/sysmobts'
make[2]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
test -z "atconfig" || rm -f atconfig
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/tests'
rm -f Makefile
make[1]: Leaving directory '/build/tests'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
Making maintainer-clean in ber
make[2]: Entering directory '/build/contrib/ber'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f rtp_ber rtp_gen_map
rm -f *.tab.c
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f ./.deps/rtp_ber.Po
rm -f ./.deps/rtp_gen_map.Po
rm -f Makefile
make[2]: Leaving directory '/build/contrib/ber'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f btsconfig.h stamp-h1
test . = "." || test -z "" || rm -f
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2022/
Removing Makefile.in
Removing aclocal.m4
Removing btsconfig.h.in
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/ber/.deps/
Removing contrib/ber/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmo-netif
Skipping repository deps/libosmo-abis
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmobts-abis.check
Removing doc/manuals/osmobts-abis.html
Removing doc/manuals/osmobts-abis.pdf
Removing doc/manuals/osmobts-abis__1.svg
Removing doc/manuals/osmobts-abis__10.svg
Removing doc/manuals/osmobts-abis__11.svg
Removing doc/manuals/osmobts-abis__12.svg
Removing doc/manuals/osmobts-abis__13.svg
Removing doc/manuals/osmobts-abis__14.svg
Removing doc/manuals/osmobts-abis__15.svg
Removing doc/manuals/osmobts-abis__2.svg
Removing doc/manuals/osmobts-abis__3.svg
Removing doc/manuals/osmobts-abis__4.svg
Removing doc/manuals/osmobts-abis__5.svg
Removing doc/manuals/osmobts-abis__6.svg
Removing doc/manuals/osmobts-abis__7.svg
Removing doc/manuals/osmobts-abis__8.svg
Removing doc/manuals/osmobts-abis__9.svg
Removing doc/manuals/osmobts-usermanual.check
Removing doc/manuals/osmobts-usermanual.html
Removing doc/manuals/osmobts-usermanual.pdf
Removing doc/manuals/osmobts-usermanual__1.svg
Removing doc/manuals/osmobts-usermanual__10.svg
Removing doc/manuals/osmobts-usermanual__11.svg
Removing doc/manuals/osmobts-usermanual__12.svg
Removing doc/manuals/osmobts-usermanual__13.svg
Removing doc/manuals/osmobts-usermanual__14.svg
Removing doc/manuals/osmobts-usermanual__15.svg
Removing doc/manuals/osmobts-usermanual__16.svg
Removing doc/manuals/osmobts-usermanual__17.svg
Removing doc/manuals/osmobts-usermanual__18.svg
Removing doc/manuals/osmobts-usermanual__19.svg
Removing doc/manuals/osmobts-usermanual__2.svg
Removing doc/manuals/osmobts-usermanual__20.svg
Removing doc/manuals/osmobts-usermanual__21.svg
Removing doc/manuals/osmobts-usermanual__22.svg
Removing doc/manuals/osmobts-usermanual__23.svg
Removing doc/manuals/osmobts-usermanual__24.svg
Removing doc/manuals/osmobts-usermanual__25.svg
Removing doc/manuals/osmobts-usermanual__26.svg
Removing doc/manuals/osmobts-usermanual__3.svg
Removing doc/manuals/osmobts-usermanual__4.svg
Removing doc/manuals/osmobts-usermanual__5.svg
Removing doc/manuals/osmobts-usermanual__6.svg
Removing doc/manuals/osmobts-usermanual__7.svg
Removing doc/manuals/osmobts-usermanual__8.svg
Removing doc/manuals/osmobts-usermanual__9.svg
Removing doc/manuals/rtp-amr.check
Removing doc/manuals/rtp-amr.html
Removing doc/manuals/rtp-amr.pdf
Removing doc/manuals/rtp-amr__1.svg
Removing doc/manuals/rtp-amr__10.svg
Removing doc/manuals/rtp-amr__11.svg
Removing doc/manuals/rtp-amr__12.svg
Removing doc/manuals/rtp-amr__13.svg
Removing doc/manuals/rtp-amr__14.svg
Removing doc/manuals/rtp-amr__15.svg
Removing doc/manuals/rtp-amr__16.svg
Removing doc/manuals/rtp-amr__17.svg
Removing doc/manuals/rtp-amr__18.svg
Removing doc/manuals/rtp-amr__19.svg
Removing doc/manuals/rtp-amr__2.svg
Removing doc/manuals/rtp-amr__20.svg
Removing doc/manuals/rtp-amr__21.svg
Removing doc/manuals/rtp-amr__22.svg
Removing doc/manuals/rtp-amr__23.svg
Removing doc/manuals/rtp-amr__24.svg
Removing doc/manuals/rtp-amr__25.svg
Removing doc/manuals/rtp-amr__26.svg
Removing doc/manuals/rtp-amr__27.svg
Removing doc/manuals/rtp-amr__3.svg
Removing doc/manuals/rtp-amr__4.svg
Removing doc/manuals/rtp-amr__5.svg
Removing doc/manuals/rtp-amr__6.svg
Removing doc/manuals/rtp-amr__7.svg
Removing doc/manuals/rtp-amr__8.svg
Removing doc/manuals/rtp-amr__9.svg
Removing doc/manuals/vty/osmobts-trx-vty-reference.pdf
Removing doc/manuals/vty/osmobts-trx-vty-reference.xml.inc.gen
Removing doc/manuals/vty/osmobts-trx-vty-reference.xml.inc.merged
Removing doc/manuals/vty/osmobts-virtual-vty-reference.pdf
Removing doc/manuals/vty/osmobts-virtual-vty-reference.xml
Removing doc/manuals/vty/osmobts-virtual-vty-reference.xml.inc.gen
Removing doc/manuals/vty/osmobts-virtual-vty-reference.xml.inc.merged
Removing include/Makefile.in
Removing include/osmo-bts/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing missing
Removing osmo-bts-1.8.0.28-c963f.tar.bz2
Removing osmo-bts-1.8.0.28-c963f.tar.gz
Removing src/Makefile.in
Removing src/common/.deps/
Removing src/common/Makefile.in
Removing src/osmo-bts-lc15/.deps/
Removing src/osmo-bts-lc15/Makefile.in
Removing src/osmo-bts-lc15/misc/.deps/
Removing src/osmo-bts-oc2g/.deps/
Removing src/osmo-bts-oc2g/Makefile.in
Removing src/osmo-bts-oc2g/misc/.deps/
Removing src/osmo-bts-octphy/.deps/
Removing src/osmo-bts-octphy/Makefile.in
Removing src/osmo-bts-omldummy/.deps/
Removing src/osmo-bts-omldummy/Makefile.in
Removing src/osmo-bts-sysmo/.deps/
Removing src/osmo-bts-sysmo/Makefile.in
Removing src/osmo-bts-trx/.deps/
Removing src/osmo-bts-trx/Makefile.in
Removing src/osmo-bts-virtual/.deps/
Removing src/osmo-bts-virtual/Makefile.in
Removing tests/Makefile.in
Removing tests/agch/.deps/
Removing tests/agch/Makefile.in
Removing tests/amr/.deps/
Removing tests/amr/Makefile.in
Removing tests/cipher/.deps/
Removing tests/cipher/Makefile.in
Removing tests/csd/.deps/
Removing tests/csd/Makefile.in
Removing tests/handover/.deps/
Removing tests/handover/Makefile.in
Removing tests/meas/.deps/
Removing tests/meas/Makefile.in
Removing tests/misc/.deps/
Removing tests/misc/Makefile.in
Removing tests/package.m4
Removing tests/paging/.deps/
Removing tests/paging/Makefile.in
Removing tests/power/.deps/
Removing tests/power/Makefile.in
Removing tests/sysmobts/.deps/
Removing tests/sysmobts/Makefile.in
Removing tests/ta_control/.deps/
Removing tests/ta_control/Makefile.in
Removing tests/testsuite
Removing tests/tx_power/.deps/
Removing tests/tx_power/Makefile.in
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmo-abis
+ repos=/build/deps/libosmo-abis
+ [ ! -d /build/deps/libosmo-abis ]
+ [ ! -d /build/deps/libosmo-abis/.git ]
+ git -C /build/deps/libosmo-abis checkout -f HEAD
+ git -C /build/deps/libosmo-abis clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing doc/Makefile
Removing doc/Makefile.in
Removing doc/examples/.libs/
Removing doc/examples/Makefile
Removing doc/examples/Makefile.in
Removing doc/examples/lapd-over-datagram-network
Removing doc/examples/lapd-over-datagram-user
Removing doc/examples/lapd-over-datagram/.deps/
Removing doc/examples/lapd-over-datagram/.dirstamp
Removing doc/examples/lapd-over-datagram/lapd-over-datagram-network.o
Removing doc/examples/lapd-over-datagram/lapd-over-datagram-user.o
Removing include/Makefile
Removing include/Makefile.in
Removing install-sh
Removing libosmoabis.pc
Removing libosmotrau.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/e1_input.lo
Removing src/e1_input.o
Removing src/e1_input_vty.lo
Removing src/e1_input_vty.o
Removing src/init.lo
Removing src/init.o
Removing src/input/.deps/
Removing src/input/.dirstamp
Removing src/input/.libs/
Removing src/input/e1d.lo
Removing src/input/e1d.o
Removing src/input/ipa.lo
Removing src/input/ipa.o
Removing src/input/ipa_keepalive.lo
Removing src/input/ipa_keepalive.o
Removing src/input/ipaccess.lo
Removing src/input/ipaccess.o
Removing src/input/lapd.lo
Removing src/input/lapd.o
Removing src/input/lapd_pcap.lo
Removing src/input/lapd_pcap.o
Removing src/input/misdn.lo
Removing src/input/misdn.o
Removing src/input/rs232.lo
Removing src/input/rs232.o
Removing src/input/unixsocket.lo
Removing src/input/unixsocket.o
Removing src/ipa_proxy.lo
Removing src/ipa_proxy.o
Removing src/libosmoabis.la
Removing src/libosmotrau.la
Removing src/subchan_demux.lo
Removing src/subchan_demux.o
Removing src/trau/.deps/
Removing src/trau/.dirstamp
Removing src/trau/.libs/
Removing src/trau/libosmotrau_la-csd_ra2.lo
Removing src/trau/libosmotrau_la-csd_ra2.o
Removing src/trau/libosmotrau_la-osmo_ortp.lo
Removing src/trau/libosmotrau_la-osmo_ortp.o
Removing src/trau/libosmotrau_la-raa_prime_decode.lo
Removing src/trau/libosmotrau_la-raa_prime_decode.o
Removing src/trau/libosmotrau_la-raa_prime_encode.lo
Removing src/trau/libosmotrau_la-raa_prime_encode.o
Removing src/trau/libosmotrau_la-trau_frame.lo
Removing src/trau/libosmotrau_la-trau_frame.o
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.lo
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.o
Removing src/trau/libosmotrau_la-trau_rtp_conv.lo
Removing src/trau/libosmotrau_la-trau_rtp_conv.o
Removing src/trau/libosmotrau_la-trau_sync.lo
Removing src/trau/libosmotrau_la-trau_sync.o
Removing src/trau_frame.lo
Removing src/trau_frame.o
Removing stamp-h1
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/ipa_recv/.deps/
Removing tests/raa_prime/.deps/
Removing tests/rtp_test/.deps/
Removing tests/subchan_demux/.deps/
Removing tests/trau_conv/.deps/
Removing tests/trau_pcu_ericsson/.deps/
Removing tests/trau_sync/.deps/
+ git_clean /build/deps/libosmo-netif
+ repos=/build/deps/libosmo-netif
+ [ ! -d /build/deps/libosmo-netif ]
+ [ ! -d /build/deps/libosmo-netif/.git ]
+ git -C /build/deps/libosmo-netif checkout -f HEAD
+ git -C /build/deps/libosmo-netif clean -dxf
Removing .version
Removing Doxyfile
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing examples/.deps/
Removing examples/.libs/
Removing examples/Makefile
Removing examples/Makefile.in
Removing examples/ipa-stream-client
Removing examples/ipa-stream-client.o
Removing examples/ipa-stream-server
Removing examples/ipa-stream-server.o
Removing examples/osmux-test-input
Removing examples/osmux-test-input.o
Removing examples/osmux-test-output
Removing examples/osmux-test-output.o
Removing examples/rs232-read
Removing examples/rs232-read.o
Removing examples/rs232-write
Removing examples/rs232-write.o
Removing examples/rtp-udp-test-client
Removing examples/rtp-udp-test-client.o
Removing examples/rtp-udp-test-server
Removing examples/rtp-udp-test-server.o
Removing examples/stream-client
Removing examples/stream-client.o
Removing examples/stream-server
Removing examples/stream-server.o
Removing examples/udp-test-client
Removing examples/udp-test-client.o
Removing examples/udp-test-server
Removing examples/udp-test-server.o
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/netif/Makefile
Removing include/osmocom/netif/Makefile.in
Removing install-sh
Removing libosmo-netif.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/amr.lo
Removing src/amr.o
Removing src/datagram.lo
Removing src/datagram.o
Removing src/ipa.lo
Removing src/ipa.o
Removing src/ipa_unit.lo
Removing src/ipa_unit.o
Removing src/jibuf.lo
Removing src/jibuf.o
Removing src/libosmonetif.la
Removing src/osmux.lo
Removing src/osmux.o
Removing src/osmux_input.lo
Removing src/osmux_input.o
Removing src/osmux_output.lo
Removing src/osmux_output.o
Removing src/prim.lo
Removing src/prim.o
Removing src/rs232.lo
Removing src/rs232.o
Removing src/rtp.lo
Removing src/rtp.o
Removing src/sctp.lo
Removing src/sctp.o
Removing src/stream.lo
Removing src/stream.o
Removing src/stream_cli.lo
Removing src/stream_cli.o
Removing src/stream_srv.lo
Removing src/stream_srv.o
Removing stamp-h1
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/amr/.deps/
Removing tests/atconfig
Removing tests/jibuf/.deps/
Removing tests/osmo-pcap-test/.deps/
Removing tests/osmux/.deps/
Removing tests/stream/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/osmo-amr-inspect
Removing utils/osmo-amr-inspect.o
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins5321798563523864112.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-bts/BTS_MODEL/trx/FIRMWARE_VERSION/master/WITH_MANUALS/1/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-bts/BTS_MODEL/trx/FIRMWARE_VERSION/master/WITH_MANUALS/1/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 1850586 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
