Skipping 84 KB..
Full Log+ export PKG_CONFIG_PATH=/build/deps/install/lib/pkgconfig:
+ PKG_CONFIG_PATH=/build/deps/install/lib/pkgconfig:
+ export LD_LIBRARY_PATH=/build/deps/install/lib
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ export PATH=/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ PATH=/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ osmo-build-dep.sh libosmo-abis
=============================== libosmo-abis ===============================
+ mkdir -p /build/deps
+ cd /build/deps
+ osmo-deps.sh libosmo-abis
+ project=libosmo-abis
+ branch=master
+ git branch -a
+ grep -c remotes/origin/master$
+ [ x1 != x0 ]
+ branch=origin/master
+ test -d libosmo-abis
+ osmo_git_clone_url libosmo-abis
+ echo https://gerrit.osmocom.org/libosmo-abis
+ git clone https://gerrit.osmocom.org/libosmo-abis libosmo-abis
Cloning into 'libosmo-abis'...
+ cd libosmo-abis
+ git fetch --tags origin
+ git fetch origin
+ deps= osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
Your branch is up to date with 'origin/master'.
+ git clean -dxf
+ [ -d ]
+ [ -d layer1-headers ]
+ git checkout -f origin/master
Note: switching to 'origin/master'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 7306f19 trau 8k decode: set fr->type correctly
+ git rev-parse HEAD
7306f1959dc969062ebada771503ab71f19213e5
+ cd libosmo-abis
+ mkdir -p /build/deps/install/stow
+ osmo_source_subdir libosmo-abis
+ subdir=
+ [ -n ]
+ autoreconf --install --force
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:67: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:67: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:67: the top level
configure.ac:89: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:89: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:89: the top level
configure.ac:198: warning: AC_OUTPUT should be used without arguments.
configure.ac:198: You should run autoupdate.
configure.ac:22: installing './compile'
configure.ac:24: installing './config.guess'
configure.ac:24: installing './config.sub'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
src/Makefile.am: installing './depcomp'
+ ./configure --prefix=/build/deps/install/stow/libosmo-abis --with-systemdsystemunitdir=/build/deps/install/stow/libosmo-abis/lib/systemd/system
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking if gcc supports -fvisibility=hidden... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmocodec >= 1.10.0... yes
checking for ortp >= 0.22.0... yes
checking for dahdi/user.h... yes
CFLAGS=" -std=gnu11 -Wall"
CPPFLAGS=" -Wall"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmoabis.pc
config.status: creating libosmotrau.pc
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
+ [ -n ]
+ make -j 8 install
echo 1.6.0.21-7306 > .version-t && mv .version-t .version
make install-recursive
make[1]: Entering directory '/build/deps/libosmo-abis'
Making install in include
make[2]: Entering directory '/build/deps/libosmo-abis/include'
make[3]: Entering directory '/build/deps/libosmo-abis/include'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include/osmocom/abis'
/usr/bin/install -c -m 644 osmocom/abis/ipa.h osmocom/abis/trau_frame.h osmocom/abis/ipa_proxy.h osmocom/abis/ipaccess.h osmocom/abis/abis.h osmocom/abis/subchan_demux.h osmocom/abis/e1_input.h osmocom/abis/lapd.h osmocom/abis/lapd_pcap.h osmocom/abis/unixsocket_proto.h '/build/deps/install/stow/libosmo-abis/include/osmocom/abis'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include/osmocom/trau'
/usr/bin/install -c -m 644 osmocom/trau/csd_ra2.h osmocom/trau/csd_raa_prime.h osmocom/trau/trau_frame.h osmocom/trau/trau_sync.h osmocom/trau/trau_pcu_ericsson.h osmocom/trau/trau_rtp.h osmocom/trau/osmo_ortp.h '/build/deps/install/stow/libosmo-abis/include/osmocom/trau'
make[3]: Leaving directory '/build/deps/libosmo-abis/include'
make[2]: Leaving directory '/build/deps/libosmo-abis/include'
Making install in src
make[2]: Entering directory '/build/deps/libosmo-abis/src'
CC init.lo
CC e1_input.lo
CC subchan_demux.lo
CC e1_input_vty.lo
CC ipa_proxy.lo
CC trau_frame.lo
CC input/e1d.lo
CC input/ipa.lo
CC input/ipa_keepalive.lo
CC input/ipaccess.lo
CC input/lapd.lo
CC input/lapd_pcap.lo
CC input/misdn.lo
CC input/rs232.lo
CC input/unixsocket.lo
CC input/dahdi.lo
CC trau/libosmotrau_la-csd_ra2.lo
CC trau/libosmotrau_la-raa_prime_decode.lo
CC trau/libosmotrau_la-raa_prime_encode.lo
CC trau/libosmotrau_la-trau_frame.lo
CC trau/libosmotrau_la-trau_pcu_ericsson.lo
CC trau/libosmotrau_la-trau_sync.lo
CC trau/libosmotrau_la-trau_rtp_conv.lo
CC trau/libosmotrau_la-osmo_ortp.lo
CCLD libosmoabis.la
trau/osmo_ortp.c:235:9: note: '#pragma message: Using internal ortp API: rtp_session_rtcp_rec'
235 | #pragma message ("Using internal ortp API: rtp_session_rtcp_rec")
| ^~~~~~~
CCLD libosmotrau.la
make[3]: Entering directory '/build/deps/libosmo-abis/src'
make[3]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmoabis.la libosmotrau.la '/build/deps/install/stow/libosmo-abis/lib'
libtool: install: /usr/bin/install -c .libs/libosmoabis.so.13.1.0 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.so.13.1.0
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.13.1.0 libosmoabis.so.13 || { rm -f libosmoabis.so.13 && ln -s libosmoabis.so.13.1.0 libosmoabis.so.13; }; })
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.13.1.0 libosmoabis.so || { rm -f libosmoabis.so && ln -s libosmoabis.so.13.1.0 libosmoabis.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoabis.lai /build/deps/install/stow/libosmo-abis/lib/libosmoabis.la
libtool: install: /usr/bin/install -c .libs/libosmotrau.so.10.0.0 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.so.10.0.0
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.10.0.0 libosmotrau.so.10 || { rm -f libosmotrau.so.10 && ln -s libosmotrau.so.10.0.0 libosmotrau.so.10; }; })
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.10.0.0 libosmotrau.so || { rm -f libosmotrau.so && ln -s libosmotrau.so.10.0.0 libosmotrau.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmotrau.lai /build/deps/install/stow/libosmo-abis/lib/libosmotrau.la
libtool: install: /usr/bin/install -c .libs/libosmoabis.a /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: /usr/bin/install -c .libs/libosmotrau.a /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmo-abis/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmo-abis/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Leaving directory '/build/deps/libosmo-abis/src'
make[2]: Leaving directory '/build/deps/libosmo-abis/src'
Making install in tests
make[2]: Entering directory '/build/deps/libosmo-abis/tests'
make[3]: Entering directory '/build/deps/libosmo-abis/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/deps/libosmo-abis/tests'
make[2]: Leaving directory '/build/deps/libosmo-abis/tests'
make[2]: Entering directory '/build/deps/libosmo-abis'
make[3]: Entering directory '/build/deps/libosmo-abis'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmoabis.pc libosmotrau.pc '/build/deps/install/stow/libosmo-abis/lib/pkgconfig'
make[3]: Leaving directory '/build/deps/libosmo-abis'
make[2]: Leaving directory '/build/deps/libosmo-abis'
make[1]: Leaving directory '/build/deps/libosmo-abis'
+ STOW_DIR=/build/deps/install/stow stow --restow libosmo-abis
+ CONFIG=
+ '[' 1 = 1 ']'
+ CONFIG=--enable-manuals
+ set +x
+ cd /build
=============================== osmo-e1-recorder ===============================
+ autoreconf --install --force
aclocal: warning: couldn't open directory 'm4': No such file or directory
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
configure.ac:40: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:40: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:40: the top level
configure.ac:88: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:88: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:88: the top level
configure.ac:109: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:109: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:109: the top level
configure.ac:188: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:188: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:188: the top level
configure.ac:190: warning: AC_OUTPUT should be used without arguments.
configure.ac:190: You should run autoupdate.
configure.ac:23: installing './compile'
configure.ac:25: installing './config.guess'
configure.ac:25: installing './config.sub'
configure.ac:9: installing './install-sh'
configure.ac:9: installing './missing'
src/Makefile.am: installing './depcomp'
+ ./configure --enable-sanitize --enable-external-tests --enable-werror --enable-manuals
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for libosmocore >= 1.2.0... yes
checking for libosmovty >= 1.2.0... yes
checking for libosmogsm >= 1.2.0... yes
checking for libosmoabis >= 0.6.0... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking for python3... yes
checking for osmotestvty.py... yes
checking whether to enable VTY/CTRL tests... yes
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating tests/Makefile
config.status: creating doc/examples/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.3.7-1030 > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '/build'
Making all in doc
make[2]: Entering directory '/build/doc'
Making all in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/examples'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making all in src
make[2]: Entering directory '/build/src'
CC storage.o
CC e1_recorder.o
CC vty.o
CC e1cap_dump.o
CC flip_bits.o
CC hdlc.o
CC hdlc-test.o
CCLD osmo-e1-recorder
CCLD hdlc-test
CCLD osmo-e1cap-dump
make[2]: Leaving directory '/build/src'
Making all in tests
make[2]: Entering directory '/build/tests'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/tests'
make[2]: Entering directory '/build'
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ make check
make check-recursive
make[1]: Entering directory '/build'
Making check in doc
make[2]: Entering directory '/build/doc'
Making check in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/doc/examples'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making check in src
make[2]: Entering directory '/build/src'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/src'
Making check in tests
make[2]: Entering directory '/build/tests'
make check-local
make[3]: Entering directory '/build/tests'
make python-tests
make[4]: Entering directory '/build/tests'
make vty-test
make[5]: Entering directory '/build/tests'
osmo_verify_transcript_vty.py -v \
-n osmo-e1-recorder -p 4444 \
-r "../src/osmo-e1-recorder -c ../doc/examples/osmo-e1-recorder.cfg" \
./*.vty
Line 0 TS 1 mode 3
Line 0 TS 2 mode 3
Line 0 TS 3 mode 3
Line 0 TS 4 mode 3
Line 0 TS 5 mode 3
Line 0 TS 6 mode 3
Line 0 TS 7 mode 3
Line 0 TS 8 mode 3
Line 0 TS 9 mode 3
Line 0 TS 10 mode 3
Line 0 TS 11 mode 3
Line 0 TS 12 mode 3
Line 0 TS 13 mode 3
Line 0 TS 14 mode 3
Line 0 TS 15 mode 3
Line 0 TS 16 mode 3
Line 0 TS 17 mode 3
Line 0 TS 18 mode 3
Line 0 TS 19 mode 3
Line 0 TS 20 mode 3
Line 0 TS 21 mode 3
Line 0 TS 22 mode 3
Line 0 TS 23 mode 3
Line 1 TS 1 mode 3
Line 1 TS 2 mode 3
Line 1 TS 3 mode 3
Line 1 TS 4 mode 3
Line 1 TS 5 mode 3
Line 1 TS 6 mode 3
Line 1 TS 7 mode 3
Line 1 TS 8 mode 3
Line 1 TS 9 mode 3
Line 1 TS 10 mode 3
Line 1 TS 11 mode 3
Line 1 TS 12 mode 3
Line 1 TS 13 mode 3
Line 1 TS 14 mode 3
Line 1 TS 15 mode 3
Line 1 TS 16 mode 3
Line 1 TS 17 mode 3
Line 1 TS 18 mode 3
Line 1 TS 19 mode 3
Line 1 TS 20 mode 3
Line 1 TS 21 mode 3
Line 1 TS 22 mode 3
Line 1 TS 23 mode 3
<0001> telnet_interface.c:88 Available via telnet 127.0.0.1 4444
Launching: cd '/build/tests'; ../src/osmo-e1-recorder -c ../doc/examples/osmo-e1-recorder.cfg
osmo-e1-recorder> show e1_line
E1 Line Number 0, Name , Driver dahdi
DAHDI Span 1 non-existent
E1 Line Number 1, Name , Driver dahdi
DAHDI Span 2 non-existent
osmo-e1-recorder> show e1_timeslot
E1 Timeslot 0 of Line 0 is Type RAW
E1 Timeslot 1 of Line 0 is Type RAW
E1 Timeslot 2 of Line 0 is Type RAW
E1 Timeslot 3 of Line 0 is Type RAW
E1 Timeslot 4 of Line 0 is Type RAW
E1 Timeslot 5 of Line 0 is Type RAW
E1 Timeslot 6 of Line 0 is Type RAW
E1 Timeslot 7 of Line 0 is Type RAW
E1 Timeslot 8 of Line 0 is Type RAW
E1 Timeslot 9 of Line 0 is Type RAW
E1 Timeslot 10 of Line 0 is Type RAW
E1 Timeslot 11 of Line 0 is Type RAW
E1 Timeslot 12 of Line 0 is Type RAW
E1 Timeslot 13 of Line 0 is Type RAW
E1 Timeslot 14 of Line 0 is Type RAW
E1 Timeslot 15 of Line 0 is Type RAW
E1 Timeslot 16 of Line 0 is Type RAW
E1 Timeslot 17 of Line 0 is Type RAW
E1 Timeslot 18 of Line 0 is Type RAW
E1 Timeslot 19 of Line 0 is Type RAW
E1 Timeslot 20 of Line 0 is Type RAW
E1 Timeslot 21 of Line 0 is Type RAW
E1 Timeslot 22 of Line 0 is Type RAW
E1 Timeslot 0 of Line 1 is Type RAW
E1 Timeslot 1 of Line 1 is Type RAW
E1 Timeslot 2 of Line 1 is Type RAW
E1 Timeslot 3 of Line 1 is Type RAW
E1 Timeslot 4 of Line 1 is Type RAW
E1 Timeslot 5 of Line 1 is Type RAW
E1 Timeslot 6 of Line 1 is Type RAW
E1 Timeslot 7 of Line 1 is Type RAW
E1 Timeslot 8 of Line 1 is Type RAW
E1 Timeslot 9 of Line 1 is Type RAW
E1 Timeslot 10 of Line 1 is Type RAW
E1 Timeslot 11 of Line 1 is Type RAW
E1 Timeslot 12 of Line 1 is Type RAW
E1 Timeslot 13 of Line 1 is Type RAW
E1 Timeslot 14 of Line 1 is Type RAW
E1 Timeslot 15 of Line 1 is Type RAW
E1 Timeslot 16 of Line 1 is Type RAW
E1 Timeslot 17 of Line 1 is Type RAW
E1 Timeslot 18 of Line 1 is Type RAW
E1 Timeslot 19 of Line 1 is Type RAW
E1 Timeslot 20 of Line 1 is Type RAW
E1 Timeslot 21 of Line 1 is Type RAW
E1 Timeslot 22 of Line 1 is Type RAW
osmo-e1-recorder> enable
osmo-e1-recorder# configure terminal
osmo-e1-recorder(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
e1_input
recorder
osmo-e1-recorder(config)# recorder
osmo-e1-recorder(config-recorder)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
line <0-255> ts <1-31> mode (none|hdlc|trau|raw)
line <0-255> mirror <0-255>
no line <0-255> mirror
storage-path PATH
file-size-mb <1-9999999>
RESULTS:
pass: ./test_nodes.vty
make[5]: Leaving directory '/build/tests'
osmotestvty.py -p /build -w /build -v
test_history (__main__.TestVTY.test_history) ... confpath /build, workdir /build
Running tests for specific VTY commands
Launch: ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg from /build
Opening /dev/null
Launching: PWD=/build './src/osmo-e1-recorder' '-c' '/build/doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/27707/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 27707 60.0 0.0 27876 23044 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 27708 20.0 0.0 21474886620 12692 ? S 04:09 0:00 ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg
build 27715 0.0 0.0 2576 924 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 27717 0.0 0.0 3700 1856 ? S 04:09 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44766), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44766), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
Launch: ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg from /build
Launching: PWD=/build './src/osmo-e1-recorder' '-c' '/build/doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/27707/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 27707 23.0 0.0 27876 23044 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 27718 0.0 0.0 21474886620 12796 ? S 04:09 0:00 ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg
build 27725 0.0 0.0 2576 944 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 27727 0.0 0.0 3700 1976 ? S 04:09 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44780), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44780), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
Launch: ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg from /build
Launching: PWD=/build './src/osmo-e1-recorder' '-c' '/build/doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/27707/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 27707 14.5 0.0 27876 23044 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 27728 16.6 0.0 21474886620 12584 ? S 04:09 0:00 ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg
build 27735 0.0 0.0 2576 952 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 27737 0.0 0.0 3700 1812 ? S 04:09 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 0.689s
OK
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44782), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44782), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
osmotestconfig.py -p /build -w /build -v
Verifying src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build 'src/osmo-e1-recorder' '-c' '/build/doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/27738/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 27738 56.2 0.0 27996 23216 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 27739 16.6 0.0 21474886620 12844 ? S 04:09 0:00 src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg
build 27746 0.0 0.0 2576 904 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 27748 0.0 0.0 3700 1824 ? S 04:09 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44790), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44790), raddr=('127.0.0.1', 4444)> (0 sockets open)
Verifying src/osmo-e1-recorder -c /build/writtenconfig/osmo-e1-recorder.cfg6tjitarm, test write_config
Launching: PWD=/build 'src/osmo-e1-recorder' '-c' '/build/writtenconfig/osmo-e1-recorder.cfg6tjitarm'
> ls -l /proc/27738/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 27738 23.0 0.0 27996 23588 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 27749 16.6 0.0 21474886620 12824 ? S 04:09 0:00 src/osmo-e1-recorder -c /build/writtenconfig/osmo-e1-recorder.cfg6tjitarm
build 27756 0.0 0.0 2576 912 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 27758 0.0 0.0 3700 1860 ? S 04:09 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44806), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44806), raddr=('127.0.0.1', 4444)> (0 sockets open)
Verifying src/osmo-e1-recorder -c /build/writtenconfig/osmo-e1-recorder.cfg6tjitarm, test token_vty_command
Launching: PWD=/build 'src/osmo-e1-recorder' '-c' '/build/writtenconfig/osmo-e1-recorder.cfg6tjitarm'
> ls -l /proc/27738/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 27738 14.5 0.0 27996 23588 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 27759 0.0 0.0 21474886620 12884 ? S 04:09 0:00 src/osmo-e1-recorder -c /build/writtenconfig/osmo-e1-recorder.cfg6tjitarm
build 27766 0.0 0.0 2576 908 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 27768 0.0 0.0 3700 1892 ? S 04:09 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44812), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44812), raddr=('127.0.0.1', 4444)> (0 sockets open)
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
make[2]: Entering directory '/build'
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ DISTCHECK_CONFIGURE_FLAGS='--enable-vty-tests --enable-external-tests --enable-werror --enable-manuals'
+ make distcheck
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make distdir-am
make[2]: Entering directory '/build'
if test -d "osmo-e1-recorder-0.3.7-1030"; then find "osmo-e1-recorder-0.3.7-1030" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1-recorder-0.3.7-1030" || { sleep 5 && rm -rf "osmo-e1-recorder-0.3.7-1030"; }; else :; fi
test -d "osmo-e1-recorder-0.3.7-1030" || mkdir "osmo-e1-recorder-0.3.7-1030"
(cd doc && make top_distdir=../osmo-e1-recorder-0.3.7-1030 distdir=../osmo-e1-recorder-0.3.7-1030/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make distdir-am
make[4]: Entering directory '/build/doc'
(cd examples && make top_distdir=../../osmo-e1-recorder-0.3.7-1030 distdir=../../osmo-e1-recorder-0.3.7-1030/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/examples'
make distdir-am
make[6]: Entering directory '/build/doc/examples'
make \
top_distdir="../../osmo-e1-recorder-0.3.7-1030" distdir="../../osmo-e1-recorder-0.3.7-1030/doc/examples" \
dist-hook
make[7]: Entering directory '/build/doc/examples'
for f in $(find . -name '*.cfg*' | sed -e 's,^.,,'); do \
j="../../osmo-e1-recorder-0.3.7-1030/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ./$f $j; \
done
make[7]: Leaving directory '/build/doc/examples'
make[6]: Leaving directory '/build/doc/examples'
make[5]: Leaving directory '/build/doc/examples'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
(cd src && make top_distdir=../osmo-e1-recorder-0.3.7-1030 distdir=../osmo-e1-recorder-0.3.7-1030/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/src'
make distdir-am
make[4]: Entering directory '/build/src'
make[4]: Leaving directory '/build/src'
make[3]: Leaving directory '/build/src'
(cd tests && make top_distdir=../osmo-e1-recorder-0.3.7-1030 distdir=../osmo-e1-recorder-0.3.7-1030/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/tests'
make distdir-am
make[4]: Entering directory '/build/tests'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make \
top_distdir="osmo-e1-recorder-0.3.7-1030" distdir="osmo-e1-recorder-0.3.7-1030" \
dist-hook
make[3]: Entering directory '/build'
echo 0.3.7-1030 > osmo-e1-recorder-0.3.7-1030/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "osmo-e1-recorder-0.3.7-1030" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-e1-recorder-0.3.7-1030"
make[2]: Leaving directory '/build'
tardir=osmo-e1-recorder-0.3.7-1030 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-e1-recorder-0.3.7-1030.tar.bz2
tardir=osmo-e1-recorder-0.3.7-1030 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-e1-recorder-0.3.7-1030.tar.gz
make[1]: Leaving directory '/build'
if test -d "osmo-e1-recorder-0.3.7-1030"; then find "osmo-e1-recorder-0.3.7-1030" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1-recorder-0.3.7-1030" || { sleep 5 && rm -rf "osmo-e1-recorder-0.3.7-1030"; }; else :; fi
case 'osmo-e1-recorder-0.3.7-1030.tar.gz osmo-e1-recorder-0.3.7-1030.tar.bz2' in \
*.tar.gz*) \
eval GZIP= gzip --best -dc osmo-e1-recorder-0.3.7-1030.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
bzip2 -dc osmo-e1-recorder-0.3.7-1030.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
lzip -dc osmo-e1-recorder-0.3.7-1030.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
xz -dc osmo-e1-recorder-0.3.7-1030.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
uncompress -c osmo-e1-recorder-0.3.7-1030.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
eval GZIP= gzip --best -dc osmo-e1-recorder-0.3.7-1030.shar.gz | unshar ;;\
*.zip*) \
unzip osmo-e1-recorder-0.3.7-1030.zip ;;\
*.tar.zst*) \
zstd -dc osmo-e1-recorder-0.3.7-1030.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w osmo-e1-recorder-0.3.7-1030
chmod u+w osmo-e1-recorder-0.3.7-1030
mkdir osmo-e1-recorder-0.3.7-1030/_build osmo-e1-recorder-0.3.7-1030/_build/sub osmo-e1-recorder-0.3.7-1030/_inst
chmod a-w osmo-e1-recorder-0.3.7-1030
test -d osmo-e1-recorder-0.3.7-1030/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
&& am__cwd=`pwd` \
&& CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_build/sub \
&& ../../configure \
--with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \
--enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \
--srcdir=../.. --prefix="$dc_install_base" \
&& make \
&& make dvi \
&& make check \
&& make install \
&& make installcheck \
&& make uninstall \
&& make distuninstallcheck_dir="$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$dc_destdir") \
&& make DESTDIR="$dc_destdir" install \
&& make DESTDIR="$dc_destdir" uninstall \
&& make DESTDIR="$dc_destdir" \
distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
} || { rm -rf "$dc_destdir"; exit 1; }) \
&& rm -rf "$dc_destdir" \
&& make dist \
&& rm -rf osmo-e1-recorder-0.3.7-1030.tar.gz osmo-e1-recorder-0.3.7-1030.tar.bz2 \
&& make distcleancheck \
&& cd "$am__cwd" \
|| exit 1
configure: WARNING: unrecognized options: --enable-vty-tests
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for libosmocore >= 1.2.0... yes
checking for libosmovty >= 1.2.0... yes
checking for libosmogsm >= 1.2.0... yes
checking for libosmoabis >= 0.6.0... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking for python3... yes
checking for osmotestvty.py... yes
checking whether to enable VTY/CTRL tests... yes
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
CFLAGS=" -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating tests/Makefile
config.status: creating doc/examples/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-vty-tests
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make all-recursive
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making all in doc
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making all in examples
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making all in src
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
CC e1_recorder.o
CC storage.o
CC vty.o
CCLD osmo-e1-recorder
CC e1cap_dump.o
CC flip_bits.o
CC hdlc.o
CCLD osmo-e1cap-dump
CC hdlc-test.o
CCLD hdlc-test
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making all in tests
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making dvi in doc
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making dvi in src
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making dvi in tests
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making check in doc
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making check in src
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making check in tests
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make check-local
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make python-tests
make[5]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make vty-test
make[6]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
osmo_verify_transcript_vty.py -v \
-n osmo-e1-recorder -p 4444 \
-r "../src/osmo-e1-recorder -c ../../../doc/examples/osmo-e1-recorder.cfg" \
../../../tests/*.vty
Line 0 TS 1 mode 3
Line 0 TS 2 mode 3
Line 0 TS 3 mode 3
Line 0 TS 4 mode 3
Line 0 TS 5 mode 3
Line 0 TS 6 mode 3
Line 0 TS 7 mode 3
Line 0 TS 8 mode 3
Line 0 TS 9 mode 3
Line 0 TS 10 mode 3
Line 0 TS 11 mode 3
Line 0 TS 12 mode 3
Line 0 TS 13 mode 3
Line 0 TS 14 mode 3
Line 0 TS 15 mode 3
Line 0 TS 16 mode 3
Line 0 TS 17 mode 3
Line 0 TS 18 mode 3
Line 0 TS 19 mode 3
Line 0 TS 20 mode 3
Line 0 TS 21 mode 3
Line 0 TS 22 mode 3
Line 0 TS 23 mode 3
Line 1 TS 1 mode 3
Line 1 TS 2 mode 3
Line 1 TS 3 mode 3
Line 1 TS 4 mode 3
Line 1 TS 5 mode 3
Line 1 TS 6 mode 3
Line 1 TS 7 mode 3
Line 1 TS 8 mode 3
Line 1 TS 9 mode 3
Line 1 TS 10 mode 3
Line 1 TS 11 mode 3
Line 1 TS 12 mode 3
Line 1 TS 13 mode 3
Line 1 TS 14 mode 3
Line 1 TS 15 mode 3
Line 1 TS 16 mode 3
Line 1 TS 17 mode 3
Line 1 TS 18 mode 3
Line 1 TS 19 mode 3
Line 1 TS 20 mode 3
Line 1 TS 21 mode 3
Line 1 TS 22 mode 3
Line 1 TS 23 mode 3
<0001> telnet_interface.c:88 Available via telnet 127.0.0.1 4444
Launching: cd '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'; ../src/osmo-e1-recorder -c ../../../doc/examples/osmo-e1-recorder.cfg
osmo-e1-recorder> show e1_line
E1 Line Number 0, Name , Driver dahdi
DAHDI Span 1 non-existent
E1 Line Number 1, Name , Driver dahdi
DAHDI Span 2 non-existent
osmo-e1-recorder> show e1_timeslot
E1 Timeslot 0 of Line 0 is Type RAW
E1 Timeslot 1 of Line 0 is Type RAW
E1 Timeslot 2 of Line 0 is Type RAW
E1 Timeslot 3 of Line 0 is Type RAW
E1 Timeslot 4 of Line 0 is Type RAW
E1 Timeslot 5 of Line 0 is Type RAW
E1 Timeslot 6 of Line 0 is Type RAW
E1 Timeslot 7 of Line 0 is Type RAW
E1 Timeslot 8 of Line 0 is Type RAW
E1 Timeslot 9 of Line 0 is Type RAW
E1 Timeslot 10 of Line 0 is Type RAW
E1 Timeslot 11 of Line 0 is Type RAW
E1 Timeslot 12 of Line 0 is Type RAW
E1 Timeslot 13 of Line 0 is Type RAW
E1 Timeslot 14 of Line 0 is Type RAW
E1 Timeslot 15 of Line 0 is Type RAW
E1 Timeslot 16 of Line 0 is Type RAW
E1 Timeslot 17 of Line 0 is Type RAW
E1 Timeslot 18 of Line 0 is Type RAW
E1 Timeslot 19 of Line 0 is Type RAW
E1 Timeslot 20 of Line 0 is Type RAW
E1 Timeslot 21 of Line 0 is Type RAW
E1 Timeslot 22 of Line 0 is Type RAW
E1 Timeslot 0 of Line 1 is Type RAW
E1 Timeslot 1 of Line 1 is Type RAW
E1 Timeslot 2 of Line 1 is Type RAW
E1 Timeslot 3 of Line 1 is Type RAW
E1 Timeslot 4 of Line 1 is Type RAW
E1 Timeslot 5 of Line 1 is Type RAW
E1 Timeslot 6 of Line 1 is Type RAW
E1 Timeslot 7 of Line 1 is Type RAW
E1 Timeslot 8 of Line 1 is Type RAW
E1 Timeslot 9 of Line 1 is Type RAW
E1 Timeslot 10 of Line 1 is Type RAW
E1 Timeslot 11 of Line 1 is Type RAW
E1 Timeslot 12 of Line 1 is Type RAW
E1 Timeslot 13 of Line 1 is Type RAW
E1 Timeslot 14 of Line 1 is Type RAW
E1 Timeslot 15 of Line 1 is Type RAW
E1 Timeslot 16 of Line 1 is Type RAW
E1 Timeslot 17 of Line 1 is Type RAW
E1 Timeslot 18 of Line 1 is Type RAW
E1 Timeslot 19 of Line 1 is Type RAW
E1 Timeslot 20 of Line 1 is Type RAW
E1 Timeslot 21 of Line 1 is Type RAW
E1 Timeslot 22 of Line 1 is Type RAW
osmo-e1-recorder> enable
osmo-e1-recorder# configure terminal
osmo-e1-recorder(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
e1_input
recorder
osmo-e1-recorder(config)# recorder
osmo-e1-recorder(config-recorder)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
line <0-255> ts <1-31> mode (none|hdlc|trau|raw)
line <0-255> mirror <0-255>
no line <0-255> mirror
storage-path PATH
file-size-mb <1-9999999>
RESULTS:
pass: ../../../tests/test_nodes.vty
make[6]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
osmotestvty.py -p /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.. -w /build/osmo-e1-recorder-0.3.7-1030/_build/sub -v
test_history (__main__.TestVTY.test_history) ... confpath /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.., workdir /build/osmo-e1-recorder-0.3.7-1030/_build/sub
Running tests for specific VTY commands
Launch: ./src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg from /build/osmo-e1-recorder-0.3.7-1030/_build/sub
Opening /dev/null
Launching: PWD=/build/osmo-e1-recorder-0.3.7-1030/_build/sub './src/osmo-e1-recorder' '-c' '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/30361/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 28008 0.0 0.0 3924 3144 ? S 04:09 0:00 /bin/bash -c test -d osmo-e1-recorder-0.3.7-1030/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-e1-recorder-0.3.7-1030.tar.gz osmo-e1-recorder-0.3.7-1030.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 30341 0.0 0.0 3924 2980 ? S 04:09 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='doc src tests ' ;; \ *) list='doc src tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 30361 60.0 0.0 27880 23060 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.. -w /build/osmo-e1-recorder-0.3.7-1030/_build/sub -v
build 30362 0.0 0.0 11680 6424 ? S 04:09 0:00 ./src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg
build 30369 0.0 0.0 2576 900 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 30371 0.0 0.0 3700 1900 ? S 04:09 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59240), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59240), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
Launch: ./src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg from /build/osmo-e1-recorder-0.3.7-1030/_build/sub
Launching: PWD=/build/osmo-e1-recorder-0.3.7-1030/_build/sub './src/osmo-e1-recorder' '-c' '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/30361/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 28008 0.0 0.0 3924 3144 ? S 04:09 0:00 /bin/bash -c test -d osmo-e1-recorder-0.3.7-1030/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-e1-recorder-0.3.7-1030.tar.gz osmo-e1-recorder-0.3.7-1030.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 30341 0.0 0.0 3924 2980 ? S 04:09 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='doc src tests ' ;; \ *) list='doc src tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 30361 23.6 0.0 27880 23060 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.. -w /build/osmo-e1-recorder-0.3.7-1030/_build/sub -v
build 30372 0.0 0.0 11680 6424 ? S 04:09 0:00 ./src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg
build 30379 0.0 0.0 2576 952 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 30381 0.0 0.0 3700 1880 ? S 04:09 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59244), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59244), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
Launch: ./src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg from /build/osmo-e1-recorder-0.3.7-1030/_build/sub
Launching: PWD=/build/osmo-e1-recorder-0.3.7-1030/_build/sub './src/osmo-e1-recorder' '-c' '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/30361/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 28008 0.0 0.0 3924 3144 ? S 04:09 0:00 /bin/bash -c test -d osmo-e1-recorder-0.3.7-1030/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-e1-recorder-0.3.7-1030.tar.gz osmo-e1-recorder-0.3.7-1030.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 30341 0.0 0.0 3924 2980 ? S 04:09 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='doc src tests ' ;; \ *) list='doc src tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 30361 14.7 0.0 27880 23060 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.. -w /build/osmo-e1-recorder-0.3.7-1030/_build/sub -v
build 30382 0.0 0.0 11680 6364 ? S 04:09 0:00 ./src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg
build 30389 0.0 0.0 2576 892 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 30391 0.0 0.0 3700 1856 ? S 04:09 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 0.691s
OK
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59254), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59254), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
osmotestconfig.py -p /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.. -w /build/osmo-e1-recorder-0.3.7-1030/_build/sub -v
Verifying src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build/osmo-e1-recorder-0.3.7-1030/_build/sub 'src/osmo-e1-recorder' '-c' '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/30392/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 28008 0.0 0.0 3924 3144 ? S 04:09 0:00 /bin/bash -c test -d osmo-e1-recorder-0.3.7-1030/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-e1-recorder-0.3.7-1030.tar.gz osmo-e1-recorder-0.3.7-1030.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 30341 0.0 0.0 3924 2980 ? S 04:09 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='doc src tests ' ;; \ *) list='doc src tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 30392 50.0 0.0 28000 23128 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.. -w /build/osmo-e1-recorder-0.3.7-1030/_build/sub -v
build 30393 0.0 0.0 11680 6480 ? S 04:09 0:00 src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../../doc/examples/osmo-e1-recorder.cfg
build 30400 0.0 0.0 2576 892 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 30402 0.0 0.0 3700 1824 ? S 04:09 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59260), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59260), raddr=('127.0.0.1', 4444)> (0 sockets open)
Verifying src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/writtenconfig/osmo-e1-recorder.cfgp0m5y2qm, test write_config
Launching: PWD=/build/osmo-e1-recorder-0.3.7-1030/_build/sub 'src/osmo-e1-recorder' '-c' '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/writtenconfig/osmo-e1-recorder.cfgp0m5y2qm'
> ls -l /proc/30392/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 28008 0.0 0.0 3924 3144 ? S 04:09 0:00 /bin/bash -c test -d osmo-e1-recorder-0.3.7-1030/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-e1-recorder-0.3.7-1030.tar.gz osmo-e1-recorder-0.3.7-1030.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 30341 0.0 0.0 3924 2980 ? S 04:09 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='doc src tests ' ;; \ *) list='doc src tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 30392 23.0 0.0 28144 23500 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.. -w /build/osmo-e1-recorder-0.3.7-1030/_build/sub -v
build 30403 0.0 0.0 11680 6328 ? S 04:09 0:00 src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/writtenconfig/osmo-e1-recorder.cfgp0m5y2qm
build 30410 0.0 0.0 2576 924 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 30412 0.0 0.0 3700 1856 ? S 04:09 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59274), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59274), raddr=('127.0.0.1', 4444)> (0 sockets open)
Verifying src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/writtenconfig/osmo-e1-recorder.cfgp0m5y2qm, test token_vty_command
Launching: PWD=/build/osmo-e1-recorder-0.3.7-1030/_build/sub 'src/osmo-e1-recorder' '-c' '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/writtenconfig/osmo-e1-recorder.cfgp0m5y2qm'
> ls -l /proc/30392/fd
total 0
lr-x------ 1 build build 64 Oct 28 04:09 0 -> pipe:[1761108671]
l-wx------ 1 build build 64 Oct 28 04:09 1 -> pipe:[1761108672]
l-wx------ 1 build build 64 Oct 28 04:09 2 -> pipe:[1761108673]
l-wx------ 1 build build 64 Oct 28 04:09 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 28008 0.0 0.0 3924 3144 ? S 04:09 0:00 /bin/bash -c test -d osmo-e1-recorder-0.3.7-1030/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-1030/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-e1-recorder-0.3.7-1030.tar.gz osmo-e1-recorder-0.3.7-1030.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 30341 0.0 0.0 3924 2980 ? S 04:09 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='doc src tests ' ;; \ *) list='doc src tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 30392 14.5 0.0 28144 23500 ? S 04:09 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-e1-recorder-0.3.7-1030/_build/sub/../.. -w /build/osmo-e1-recorder-0.3.7-1030/_build/sub -v
build 30413 0.0 0.0 11680 6432 ? S 04:09 0:00 src/osmo-e1-recorder -c /build/osmo-e1-recorder-0.3.7-1030/_build/sub/writtenconfig/osmo-e1-recorder.cfgp0m5y2qm
build 30420 0.0 0.0 2576 944 ? S 04:09 0:00 /bin/sh -c ps xua | grep osmo
build 30422 0.0 0.0 3700 1868 ? S 04:09 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59284), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59284), raddr=('127.0.0.1', 4444)> (0 sockets open)
make[5]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making install in doc
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-e1-recorder-0.3.7-1030/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-e1-recorder.cfg '/build/osmo-e1-recorder-0.3.7-1030/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-e1-recorder-0.3.7-1030/_inst/share/doc/osmo-e1-recorder/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[5]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making install in src
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
/usr/bin/mkdir -p '/build/osmo-e1-recorder-0.3.7-1030/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-e1-recorder osmo-e1cap-dump hdlc-test '/build/osmo-e1-recorder-0.3.7-1030/_inst/bin'
libtool: install: /usr/bin/install -c osmo-e1-recorder /build/osmo-e1-recorder-0.3.7-1030/_inst/bin/osmo-e1-recorder
libtool: install: /usr/bin/install -c osmo-e1cap-dump /build/osmo-e1-recorder-0.3.7-1030/_inst/bin/osmo-e1cap-dump
libtool: install: /usr/bin/install -c hdlc-test /build/osmo-e1-recorder-0.3.7-1030/_inst/bin/hdlc-test
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making installcheck in src
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
( cd '/build/osmo-e1-recorder-0.3.7-1030/_inst/etc/osmocom' && rm -f osmo-e1-recorder.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/build/osmo-e1-recorder-0.3.7-1030/_inst/share/doc/osmo-e1-recorder/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making uninstall in src
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
( cd '/build/osmo-e1-recorder-0.3.7-1030/_inst/bin' && rm -f osmo-e1-recorder osmo-e1cap-dump hdlc-test )
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making install in doc
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-e1-recorder.cfg '/tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/etc/osmocom'
make install-data-hook
make[6]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/share/doc/osmo-e1-recorder/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[6]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[5]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making install in src
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
/usr/bin/mkdir -p '/tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-e1-recorder osmo-e1cap-dump hdlc-test '/tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/bin'
libtool: install: /usr/bin/install -c osmo-e1-recorder /tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/bin/osmo-e1-recorder
libtool: install: /usr/bin/install -c osmo-e1cap-dump /tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/bin/osmo-e1cap-dump
libtool: install: /usr/bin/install -c hdlc-test /tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/bin/hdlc-test
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making install in tests
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
( cd '/tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/etc/osmocom' && rm -f osmo-e1-recorder.cfg )
make uninstall-hook
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="/tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/share/doc/osmo-e1-recorder/examples/$f" && \
rm -f $j; \
done
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making uninstall in src
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
( cd '/tmp/am-dc-28008//build/osmo-e1-recorder-0.3.7-1030/_inst/bin' && rm -f osmo-e1-recorder osmo-e1cap-dump hdlc-test )
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
if test -d "osmo-e1-recorder-0.3.7-1030"; then find "osmo-e1-recorder-0.3.7-1030" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1-recorder-0.3.7-1030" || { sleep 5 && rm -rf "osmo-e1-recorder-0.3.7-1030"; }; else :; fi
test -d "osmo-e1-recorder-0.3.7-1030" || mkdir "osmo-e1-recorder-0.3.7-1030"
(cd doc && make top_distdir=../osmo-e1-recorder-0.3.7-1030 distdir=../osmo-e1-recorder-0.3.7-1030/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-e1-recorder-0.3.7-1030 distdir=../../osmo-e1-recorder-0.3.7-1030/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make \
top_distdir="../../osmo-e1-recorder-0.3.7-1030" distdir="../../osmo-e1-recorder-0.3.7-1030/doc/examples" \
dist-hook
make[8]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
for f in $(find ../../../../doc/examples -name '*.cfg*' | sed -e 's,^../../../../doc/examples,,'); do \
j="../../osmo-e1-recorder-0.3.7-1030/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ../../../../doc/examples/$f $j; \
done
make[8]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[5]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
(cd src && make top_distdir=../osmo-e1-recorder-0.3.7-1030 distdir=../osmo-e1-recorder-0.3.7-1030/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[5]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
(cd tests && make top_distdir=../osmo-e1-recorder-0.3.7-1030 distdir=../osmo-e1-recorder-0.3.7-1030/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make \
top_distdir="osmo-e1-recorder-0.3.7-1030" distdir="osmo-e1-recorder-0.3.7-1030" \
dist-hook
make[4]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
echo 0.3.7-1030 > osmo-e1-recorder-0.3.7-1030/.tarball-version
make[4]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
test -n "" \
|| find "osmo-e1-recorder-0.3.7-1030" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-e1-recorder-0.3.7-1030/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-e1-recorder-0.3.7-1030"
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
tardir=osmo-e1-recorder-0.3.7-1030 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-e1-recorder-0.3.7-1030.tar.bz2
tardir=osmo-e1-recorder-0.3.7-1030 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-e1-recorder-0.3.7-1030.tar.gz
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
if test -d "osmo-e1-recorder-0.3.7-1030"; then find "osmo-e1-recorder-0.3.7-1030" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1-recorder-0.3.7-1030" || { sleep 5 && rm -rf "osmo-e1-recorder-0.3.7-1030"; }; else :; fi
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
Making distclean in doc
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/examples" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc/examples'
make[3]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../doc" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
make[3]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/doc'
Making distclean in src
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
rm -f osmo-e1-recorder osmo-e1cap-dump hdlc-test
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "../../../src" || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f ./.deps/e1_recorder.Po
rm -f ./.deps/e1cap_dump.Po
rm -f ./.deps/flip_bits.Po
rm -f ./.deps/hdlc-test.Po
rm -f ./.deps/hdlc.Po
rm -f ./.deps/storage.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/src'
Making distclean in tests
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../tests" || test -z "" || rm -f
test -z "atconfig " || rm -f atconfig
rm -f Makefile
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub/tests'
make[2]: Entering directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../.." || test -z "" || rm -f
rm -f config.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-1030/_build/sub'
if test -d "osmo-e1-recorder-0.3.7-1030"; then find "osmo-e1-recorder-0.3.7-1030" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1-recorder-0.3.7-1030" || { sleep 5 && rm -rf "osmo-e1-recorder-0.3.7-1030"; }; else :; fi
=============================================================
osmo-e1-recorder-0.3.7-1030 archives ready for distribution:
osmo-e1-recorder-0.3.7-1030.tar.gz
osmo-e1-recorder-0.3.7-1030.tar.bz2
=============================================================
+ make maintainer-clean
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
rm -f osmo-e1-recorder osmo-e1cap-dump hdlc-test
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f ./.deps/e1_recorder.Po
rm -f ./.deps/e1cap_dump.Po
rm -f ./.deps/flip_bits.Po
rm -f ./.deps/hdlc-test.Po
rm -f ./.deps/hdlc.Po
rm -f ./.deps/storage.Po
rm -f ./.deps/vty.Po
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
test -z "atconfig " || rm -f atconfig
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[1]: Leaving directory '/build/tests'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
rm -f config.h stamp-h1
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing Makefile.in
Removing __pycache__/
Removing aclocal.m4
Removing compile
Removing config.guess
Removing config.h.in
Removing config.sub
Removing configure
Removing depcomp
Skipping repository deps/libosmo-abis
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing m4/
Removing missing
Removing osmo-e1-recorder-0.3.7-1030.tar.bz2
Removing osmo-e1-recorder-0.3.7-1030.tar.gz
Removing src/.deps/
Removing src/Makefile.in
Removing tests/Makefile.in
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmo-abis
+ repos=/build/deps/libosmo-abis
+ [ ! -d /build/deps/libosmo-abis ]
+ [ ! -d /build/deps/libosmo-abis/.git ]
+ git -C /build/deps/libosmo-abis checkout -f HEAD
+ git -C /build/deps/libosmo-abis clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing install-sh
Removing libosmoabis.pc
Removing libosmotrau.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/e1_input.lo
Removing src/e1_input.o
Removing src/e1_input_vty.lo
Removing src/e1_input_vty.o
Removing src/init.lo
Removing src/init.o
Removing src/input/.deps/
Removing src/input/.dirstamp
Removing src/input/.libs/
Removing src/input/dahdi.lo
Removing src/input/dahdi.o
Removing src/input/e1d.lo
Removing src/input/e1d.o
Removing src/input/ipa.lo
Removing src/input/ipa.o
Removing src/input/ipa_keepalive.lo
Removing src/input/ipa_keepalive.o
Removing src/input/ipaccess.lo
Removing src/input/ipaccess.o
Removing src/input/lapd.lo
Removing src/input/lapd.o
Removing src/input/lapd_pcap.lo
Removing src/input/lapd_pcap.o
Removing src/input/misdn.lo
Removing src/input/misdn.o
Removing src/input/rs232.lo
Removing src/input/rs232.o
Removing src/input/unixsocket.lo
Removing src/input/unixsocket.o
Removing src/ipa_proxy.lo
Removing src/ipa_proxy.o
Removing src/libosmoabis.la
Removing src/libosmotrau.la
Removing src/subchan_demux.lo
Removing src/subchan_demux.o
Removing src/trau/.deps/
Removing src/trau/.dirstamp
Removing src/trau/.libs/
Removing src/trau/libosmotrau_la-csd_ra2.lo
Removing src/trau/libosmotrau_la-csd_ra2.o
Removing src/trau/libosmotrau_la-osmo_ortp.lo
Removing src/trau/libosmotrau_la-osmo_ortp.o
Removing src/trau/libosmotrau_la-raa_prime_decode.lo
Removing src/trau/libosmotrau_la-raa_prime_decode.o
Removing src/trau/libosmotrau_la-raa_prime_encode.lo
Removing src/trau/libosmotrau_la-raa_prime_encode.o
Removing src/trau/libosmotrau_la-trau_frame.lo
Removing src/trau/libosmotrau_la-trau_frame.o
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.lo
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.o
Removing src/trau/libosmotrau_la-trau_rtp_conv.lo
Removing src/trau/libosmotrau_la-trau_rtp_conv.o
Removing src/trau/libosmotrau_la-trau_sync.lo
Removing src/trau/libosmotrau_la-trau_sync.o
Removing src/trau_frame.lo
Removing src/trau_frame.o
Removing stamp-h1
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/ipa_recv/.deps/
Removing tests/raa_prime/.deps/
Removing tests/rtp_test/.deps/
Removing tests/subchan_demux/.deps/
Removing tests/trau_conv/.deps/
Removing tests/trau_pcu_ericsson/.deps/
Removing tests/trau_sync/.deps/
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/atlocal
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ [ -d layer1-headers ]
[osmocom-master] $ /bin/sh -xe /tmp/jenkins13475307938740832122.sh
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-e1-recorder/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-e1-recorder/a1/default/a2/default/a3/default/a4/default/label/osmocom-master
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 3191015 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
