Skipping 659 KB..
Full Logno support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmomsc-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpm9vohgwr/osmomsc-usermanual.idx is empty
osmomsc-usermanual.aux MD5 checksum changed
osmomsc-usermanual.toc MD5 checksum changed
the /tmp/tmpm9vohgwr/osmomsc-usermanual.aux file has changed
pdflatex -interaction=batchmode osmomsc-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpm9vohgwr/osmomsc-usermanual.idx is empty
osmomsc-usermanual.aux MD5 checksum changed
the /tmp/tmpm9vohgwr/osmomsc-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmomsc-usermanual.pdf' successfully built
a2x: deleting /build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/manuals/osmomsc-usermanual.xml
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/manuals'
Making all in sequence_charts
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/sequence_charts'
echo "built only on manual invocation, needs mscgen and dot (graphviz) programs: invoke 'make charts'"
built only on manual invocation, needs mscgen and dot (graphviz) programs: invoke 'make charts'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/sequence_charts'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
Making all in contrib
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
Making all in tests
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
Making all in sms_queue
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sms_queue'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sms_queue'
Making all in msc_vlr
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/msc_vlr'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/msc_vlr'
Making all in db_sms
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/db_sms'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/db_sms'
Making all in sdp_msg
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sdp_msg'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sdp_msg'
Making all in mncc
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/mncc'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/mncc'
Making all in csd
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/csd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/csd'
Making all in smpp
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/smpp'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/smpp'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make[2]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make[1]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make[1]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include'
Making dvi in osmocom
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom'
Making dvi in msc
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/msc'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/msc'
Making dvi in smpp
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/smpp'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/smpp'
Making dvi in vlr
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/vlr'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/vlr'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include'
make[2]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src'
Making dvi in libvlr
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libvlr'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libvlr'
Making dvi in libmsc
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libmsc'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libmsc'
Making dvi in libsmpputil
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libsmpputil'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libsmpputil'
Making dvi in utils
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/utils'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/utils'
Making dvi in osmo-msc
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/osmo-msc'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/osmo-msc'
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src'
make[2]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src'
Making dvi in doc
make[2]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/manuals'
Making dvi in sequence_charts
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/sequence_charts'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/sequence_charts'
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
Making dvi in tests
make[2]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
Making dvi in sms_queue
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sms_queue'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sms_queue'
Making dvi in msc_vlr
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/msc_vlr'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/msc_vlr'
Making dvi in db_sms
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/db_sms'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/db_sms'
Making dvi in sdp_msg
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sdp_msg'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sdp_msg'
Making dvi in mncc
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/mncc'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/mncc'
Making dvi in csd
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/csd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/csd'
Making dvi in smpp
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/smpp'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/smpp'
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[2]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make[1]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make[1]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include'
Making check in osmocom
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom'
Making check in msc
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/msc'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/msc'
Making check in smpp
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/smpp'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/smpp'
Making check in vlr
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/vlr'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom/vlr'
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src'
Making check in libvlr
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libvlr'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libvlr'
Making check in libmsc
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libmsc'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libmsc'
Making check in libsmpputil
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libsmpputil'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/libsmpputil'
Making check in utils
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/utils'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/utils'
Making check in osmo-msc
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/osmo-msc'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src/osmo-msc'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/src'
Making check in doc
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmomsc-usermanual.check; \
fi
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/manuals'
if ! [ -f osmomsc-usermanual.adoc ]; then \
ln -s osmomsc-usermanual.adoc osmomsc-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmomsc-usermanual.adoc > osmomsc-usermanual.check 2>&1
touch osmomsc-usermanual.check
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/manuals'
Making check in sequence_charts
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/sequence_charts'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc/sequence_charts'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/doc'
Making check in contrib
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/contrib'
Making check in tests
make[3]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
Making check in sms_queue
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sms_queue'
make sms_queue_test
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sms_queue'
CC sms_queue_test.o
CC stubs.o
CCLD sms_queue_test
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sms_queue'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sms_queue'
Making check in msc_vlr
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/msc_vlr'
make msc_vlr_test_no_authen msc_vlr_test_gsm_authen msc_vlr_test_gsm_ciph msc_vlr_test_umts_authen msc_vlr_test_authen_reuse msc_vlr_test_hlr_reject msc_vlr_test_hlr_timeout msc_vlr_test_ms_timeout msc_vlr_test_reject_concurrency msc_vlr_test_call msc_vlr_test_rest msc_vlr_test_ss
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/msc_vlr'
CC msc_vlr_test_no_authen.o
CC msc_vlr_tests.o
CC stubs.o
CC msc_vlr_test_gsm_authen.o
CC msc_vlr_test_umts_authen.o
CC msc_vlr_test_gsm_ciph.o
CC msc_vlr_test_authen_reuse.o
CC msc_vlr_test_hlr_reject.o
CC msc_vlr_test_hlr_timeout.o
CC msc_vlr_test_ms_timeout.o
CC msc_vlr_test_reject_concurrency.o
CC msc_vlr_test_call.o
CC msc_vlr_test_rest.o
CC msc_vlr_test_ss.o
CCLD msc_vlr_test_authen_reuse
CCLD msc_vlr_test_umts_authen
CCLD msc_vlr_test_hlr_reject
CCLD msc_vlr_test_gsm_authen
CCLD msc_vlr_test_gsm_ciph
CCLD msc_vlr_test_hlr_timeout
CCLD msc_vlr_test_ms_timeout
CCLD msc_vlr_test_call
CCLD msc_vlr_test_ss
CCLD msc_vlr_test_rest
CCLD msc_vlr_test_no_authen
CCLD msc_vlr_test_reject_concurrency
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/msc_vlr'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/msc_vlr'
Making check in db_sms
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/db_sms'
make db_sms_test
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/db_sms'
CC db_sms_test.o
CC stubs.o
CCLD db_sms_test
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/db_sms'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/db_sms'
Making check in sdp_msg
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sdp_msg'
make sdp_msg_test
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sdp_msg'
CC sdp_msg_test.o
CCLD sdp_msg_test
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sdp_msg'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/sdp_msg'
Making check in mncc
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/mncc'
make mncc_test
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/mncc'
CC mncc_test.o
CCLD mncc_test
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/mncc'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/mncc'
Making check in csd
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/csd'
make csd_test
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/csd'
CC csd_test.o
CCLD csd_test
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/csd'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/csd'
Making check in smpp
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/smpp'
make smpp_test
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/smpp'
CC smpp_test.o
CCLD smpp_test
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/smpp'
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/smpp'
make[4]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make check-local
make[5]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## ----------------------------------- ##
## osmo-msc 1.12.1.20-ae8d test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: db_sms_test ok
4: msc_vlr_test_no_authen ok
5: msc_vlr_test_gsm_authen ok
6: msc_vlr_test_gsm_ciph ok
7: msc_vlr_test_umts_authen ok
8: msc_vlr_test_authen_reuse ok
9: msc_vlr_test_hlr_reject ok
10: msc_vlr_test_hlr_timeout ok
11: msc_vlr_test_ms_timeout ok
12: msc_vlr_test_reject_concurrency ok
13: msc_vlr_test_call ok
14: msc_vlr_test_rest ok
15: msc_vlr_test_ss ok
16: sdp_msg_test ok
17: mncc_test ok
18: csd_test ok
## ------------- ##
## Test results. ##
## ------------- ##
All 18 tests were successful.
make python-tests
make[6]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make vty-test
make[7]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make vty-python-test
make[8]: Entering directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
IU=1 osmotestvty.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
test_history (__main__.TestVTY.test_history) ... confpath /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.., workdir /build/osmo-msc-1.12.1.20-ae8d/_build/sub
Running tests for specific VTY commands
Launch: ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg from /build/osmo-msc-1.12.1.20-ae8d/_build/sub
Opening /dev/null
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132679/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:58 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:58 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:58 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132679 57.8 0.0 27880 23032 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132680 0.0 0.0 20504 12564 ? D 23:58 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg
build 132687 0.0 0.0 2576 920 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 132689 0.0 0.0 3700 1876 ? S 23:58 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53400), raddr=('127.0.0.1', 4254)> (1 sockets open)
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53400), raddr=('127.0.0.1', 4254)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg from /build/osmo-msc-1.12.1.20-ae8d/_build/sub
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132679/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:58 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:58 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:58 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132679 6.9 0.0 27880 23032 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132690 0.0 0.0 20732 12896 ? R 23:58 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg
build 132697 0.0 0.0 2576 932 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 132699 0.0 0.0 3700 1864 ? S 23:58 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53406), raddr=('127.0.0.1', 4254)> (1 sockets open)
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53406), raddr=('127.0.0.1', 4254)> (0 sockets open)
Terminating took 1.415s
Process returned code: 0
Launch: ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg from /build/osmo-msc-1.12.1.20-ae8d/_build/sub
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132679/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:58 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:58 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:58 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:58 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132679 3.1 0.0 27880 23032 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132700 0.0 0.0 20536 12704 ? D 23:58 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg
build 132707 0.0 0.0 2576 896 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 132709 0.0 0.0 3700 1864 ? S 23:58 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 5.063s
OK
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53408), raddr=('127.0.0.1', 4254)> (1 sockets open)
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53408), raddr=('127.0.0.1', 4254)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
IU=1 osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 53.8 0.0 27988 23116 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132711 0.0 0.0 20732 13020 ? S 23:58 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc.cfg
build 132718 0.0 0.0 2576 932 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo
build 132720 0.0 0.0 3700 1856 ? S 23:58 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53422), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53422), raddr=('127.0.0.1', 4254)> (0 sockets open)
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc.cfgqjk21ua1, test write_config
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc.cfgqjk21ua1'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 5.4 0.0 28004 23660 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132721 0.0 0.0 20536 12580 ? D 23:59 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc.cfgqjk21ua1
build 132728 0.0 0.0 2576 928 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132730 0.0 0.0 3700 1904 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40844), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40844), raddr=('127.0.0.1', 4254)> (0 sockets open)
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc.cfgqjk21ua1, test token_vty_command
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc.cfgqjk21ua1'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 2.8 0.0 28004 23660 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132731 0.0 0.0 20536 12804 ? D 23:59 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc.cfgqjk21ua1
build 132738 0.0 0.0 2576 952 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132740 0.0 0.0 3700 1896 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40848), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40848), raddr=('127.0.0.1', 4254)> (0 sockets open)
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg, test verify_doc
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 1.9 0.0 28004 23660 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132741 0.0 0.0 20736 12996 ? S 23:59 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg
build 132748 0.0 0.0 2576 940 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132750 0.0 0.0 3700 1800 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40860), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40860), raddr=('127.0.0.1', 4254)> (0 sockets open)
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_custom-sccp.cfgeravtnvj, test write_config
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_custom-sccp.cfgeravtnvj'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 1.6 0.0 28004 23660 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132751 0.0 0.0 20540 12812 ? D 23:59 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_custom-sccp.cfgeravtnvj
build 132758 0.0 0.0 2576 904 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132760 0.0 0.0 3700 1900 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40868), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 0.475s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40868), raddr=('127.0.0.1', 4254)> (0 sockets open)
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_custom-sccp.cfgeravtnvj, test token_vty_command
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_custom-sccp.cfgeravtnvj'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 1.3 0.0 28004 23660 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132761 0.0 0.0 20540 12720 ? D 23:59 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_custom-sccp.cfgeravtnvj
build 132768 0.0 0.0 2576 936 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132770 0.0 0.0 3700 1800 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40882), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 1.415s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40882), raddr=('127.0.0.1', 4254)> (0 sockets open)
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg, test verify_doc
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 1.0 0.0 28004 23660 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132771 0.0 0.0 20544 12740 ? D 23:59 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../../doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg
build 132778 0.0 0.0 2576 908 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132780 0.0 0.0 3700 1816 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40890), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40890), raddr=('127.0.0.1', 4254)> (0 sockets open)
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_multi-cs7.cfgg5e8il1z, test write_config
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_multi-cs7.cfgg5e8il1z'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 1.0 0.0 28004 23660 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132781 16.6 0.0 20740 13216 ? S 23:59 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_multi-cs7.cfgg5e8il1z
build 132788 0.0 0.0 2576 948 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132790 0.0 0.0 3700 1900 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40902), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 40902), raddr=('127.0.0.1', 4254)> (0 sockets open)
Verifying src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_multi-cs7.cfgg5e8il1z, test token_vty_command
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub 'src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_multi-cs7.cfgg5e8il1z'
> ls -l /proc/132710/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132710 0.8 0.0 28004 23660 ? S 23:58 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-msc-1.12.1.20-ae8d/_build/sub/../.. -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132791 0.0 0.0 20544 12556 ? D 23:59 0:00 src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/_build/sub/writtenconfig/osmo-msc_multi-cs7.cfgg5e8il1z
build 132798 0.0 0.0 2576 904 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132800 0.0 0.0 3700 1828 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39476), raddr=('127.0.0.1', 4254)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39476), raddr=('127.0.0.1', 4254)> (0 sockets open)
../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
confpath /build/osmo-msc-1.12.1.20-ae8d/tests/.., workdir /build/osmo-msc-1.12.1.20-ae8d/_build/sub
Running tests for specific VTY commands
testConfigNetworkTree (__main__.TestVTYMSC.testConfigNetworkTree) ... Opening /dev/null
Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132801/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132801 40.0 0.0 19644 14672 ? S 23:59 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132802 16.6 0.0 20732 12908 ? S 23:59 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg
build 132809 0.0 0.0 2576 912 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132811 0.0 0.0 3700 1820 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39482), raddr=('127.0.0.1', 4254)> (1 sockets open)
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39482), raddr=('127.0.0.1', 4254)> (0 sockets open)
Terminating took 1.415s
Process returned code: 0
ok
testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132801/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132801 1.8 0.0 19644 14672 ? S 23:59 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132812 0.0 0.0 20536 12628 ? D 23:59 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg
build 132819 0.0 0.0 2576 920 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132821 0.0 0.0 3700 1788 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39488), raddr=('127.0.0.1', 4254)> (1 sockets open)
Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).']
Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).']
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39488), raddr=('127.0.0.1', 4254)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132801/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132801 1.0 0.0 19644 14672 ? S 23:59 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132822 0.0 0.0 20536 12768 ? D 23:59 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg
build 132829 0.0 0.0 2576 940 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132831 0.0 0.0 3700 1824 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39498), raddr=('127.0.0.1', 4254)> (1 sockets open)
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39498), raddr=('127.0.0.1', 4254)> (0 sockets open)
Terminating took 0.475s
Process returned code: 0
ok
testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132801/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132801 0.7 0.0 19644 14672 ? S 23:59 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132832 0.0 0.0 20536 12748 ? D 23:59 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg
build 132839 0.0 0.0 2576 956 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132841 0.0 0.0 3700 1976 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39500), raddr=('127.0.0.1', 4254)> (1 sockets open)
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39500), raddr=('127.0.0.1', 4254)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
ok
testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132801/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132801 0.7 0.0 19644 14672 ? S 23:59 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132842 0.0 0.0 20536 12740 ? D 23:59 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg
build 132849 0.0 0.0 2576 880 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132851 0.0 0.0 3700 1860 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39514), raddr=('127.0.0.1', 4254)> (1 sockets open)
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39514), raddr=('127.0.0.1', 4254)> (0 sockets open)
Killed child process
Process returned code: -9
ERROR
testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build/osmo-msc-1.12.1.20-ae8d/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg'
> ls -l /proc/132801/fd
total 0
lr-x------ 1 build build 64 Nov 7 23:59 0 -> pipe:[1977303910]
l-wx------ 1 build build 64 Nov 7 23:59 1 -> pipe:[1977303911]
l-wx------ 1 build build 64 Nov 7 23:59 2 -> pipe:[1977303912]
l-wx------ 1 build build 64 Nov 7 23:59 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 0.0.0.0:2775 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4254 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4255 0.0.0.0:*
> ps xua | grep osmo
build 121334 0.0 0.0 3924 3068 ? S 23:58 0:00 /bin/bash -c test -d osmo-msc-1.12.1.20-ae8d/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.20-ae8d/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.20-ae8d.tar.gz osmo-msc-1.12.1.20-ae8d.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 125827 0.0 0.0 3924 3012 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 126034 0.0 0.0 3924 2932 ? S 23:58 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 132801 0.3 0.0 19644 14672 ? S 23:59 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.20-ae8d/_build/sub -v
build 132852 0.0 0.0 20300 11052 ? D 23:59 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.20-ae8d/tests/../doc/examples/osmo-msc/osmo-msc.cfg
build 132859 0.0 0.0 2576 900 ? S 23:59 0:00 /bin/sh -c ps xua | grep osmo
build 132861 0.0 0.0 3700 1792 ? S 23:59 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45422), raddr=('127.0.0.1', 4254)> (1 sockets open)
Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45422), raddr=('127.0.0.1', 4254)> (0 sockets open)
Terminating took 4.168s
Process returned code: 0
ok
======================================================================
ERROR: testSmppFirst (__main__.TestVTYMSC.testSmppFirst)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests/../../../tests/vty_test_runner.py", line 70, in tearDown
raise Exception("Process returned %d" % rc)
Exception: Process returned -9
----------------------------------------------------------------------
Ran 6 tests in 17.708s
FAILED (errors=1)
make[8]: *** [Makefile:723: vty-python-test] Error 1
make[8]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[7]: *** [Makefile:743: vty-test] Error 2
make[7]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[6]: *** [Makefile:713: python-tests] Error 2
make[6]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[5]: *** [Makefile:767: check-local] Error 2
make[5]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[4]: *** [Makefile:572: check-am] Error 2
make[4]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[3]: *** [Makefile:422: check-recursive] Error 1
make[3]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub/tests'
make[2]: *** [Makefile:471: check-recursive] Error 1
make[2]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make[1]: *** [Makefile:770: check] Error 2
make[1]: Leaving directory '/build/osmo-msc-1.12.1.20-ae8d/_build/sub'
make: *** [Makefile:690: distcheck] Error 1
+ exit_tar_workspace
+ '[' 1 = 1 ']'
+ tar -cJf /tmp/workspace.tar.xz /build
tar: Removing leading `/' from member names
+ mv /tmp/workspace.tar.xz /build
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 99277 killed;
[ssh-agent] Stopped.
Archiving artifacts
Sending e-mails to: jenkins-notifications@lists.osmocom.org laforge@gnumonks.org
Finished: FAILURE
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
