Skip to content
[Jenkins]Jenkins
log insign up
Success

Console Output

Download View as plain text
Skipping 120 KB.. Full Log
a2x: resource files: []
a2x: resource directories: ['/etc/asciidoc/stylesheets']
a2x: executing: asciidoc ['-f', '/opt/osmo-gsm-manuals/build/mscgen-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/diag-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf', '-f', '/opt/osmo-gsm-manuals/build/graphviz-filter.conf', '-a', 'srcdir=/build/doc/manuals', '-a', 'commondir=/opt/osmo-gsm-manuals/common', ('--attribute', 'docinfo'), ('--attribute', 'revnumber=DRAFT 1.5.0-4-g8734'), ('--attribute', 'revdate=2024-Jul-31'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=pdf'), ('--out-file', '/build/doc/manuals/osmopcu-usermanual.xml')]
a2x: executing: "dblatex" -t pdf -p "/etc/asciidoc/dblatex/asciidoc-dblatex.xsl" -s "/etc/asciidoc/dblatex/asciidoc-dblatex.sty" --config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0  -V  "/build/doc/manuals/osmopcu-usermanual.xml"

Build the book set list...
xsltproc -o doclist.txt --xinclude --xincludestyle doclist.xsl /build/doc/manuals/osmopcu-usermanual.xml
/build/doc/manuals/osmopcu-usermanual.xml:445: element figure: validity error : ID fig-gprs-pcubts already defined
<figure id="fig-gprs-pcubts"><title>GPRS network architecture with PCU in BTS</t
                            ^
Build the listings...
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/doc/manuals' /usr/share/dblatex/xsl/common/mklistings.xsl /build/doc/manuals/osmopcu-usermanual.xml
/build/doc/manuals/osmopcu-usermanual.xml:445: element figure: validity error : ID fig-gprs-pcubts already defined
<figure id="fig-gprs-pcubts"><title>GPRS network architecture with PCU in BTS</t
                            ^
xsltproc -o osmopcu-usermanual.rtex --xinclude --xincludestyle --param listings.xml '/tmp/tmp5d2p7mqg/listings.xml' --param current.dir '/build/doc/manuals' /tmp/tmp5d2p7mqg/custom.xsl /build/doc/manuals/osmopcu-usermanual.xml
/build/doc/manuals/osmopcu-usermanual.xml:445: element figure: validity error : ID fig-gprs-pcubts already defined
<figure id="fig-gprs-pcubts"><title>GPRS network architecture with PCU in BTS</t
                            ^
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Error: no ID for constraint linkend: ns:nsvc_packets:in.
XRef to nonexistent id: ns:nsvc_packets:in
Error: no ID for constraint linkend: ns:nsvc_packets:out.
XRef to nonexistent id: ns:nsvc_packets:out
Error: no ID for constraint linkend: ns:nsvc_packets:out:drop.
XRef to nonexistent id: ns:nsvc_packets:out:drop
Error: no ID for constraint linkend: ns:nsvc_bytes:in.
XRef to nonexistent id: ns:nsvc_bytes:in
Error: no ID for constraint linkend: ns:nsvc_bytes:out.
XRef to nonexistent id: ns:nsvc_bytes:out
Error: no ID for constraint linkend: ns:nsvc_bytes:out:drop.
XRef to nonexistent id: ns:nsvc_bytes:out:drop
Error: no ID for constraint linkend: ns:nsvc_blocked.
XRef to nonexistent id: ns:nsvc_blocked
Error: no ID for constraint linkend: ns:nsvc_unblocked.
XRef to nonexistent id: ns:nsvc_unblocked
Error: no ID for constraint linkend: ns:nsvc_dead.
XRef to nonexistent id: ns:nsvc_dead
Error: no ID for constraint linkend: ns:nsvc_replaced.
XRef to nonexistent id: ns:nsvc_replaced
Error: no ID for constraint linkend: ns:nsvc_nsei-chg.
XRef to nonexistent id: ns:nsvc_nsei-chg
Error: no ID for constraint linkend: ns:nsvc_inv-nsvci.
XRef to nonexistent id: ns:nsvc_inv-nsvci
Error: no ID for constraint linkend: ns:nsvc_inv-nsei.
XRef to nonexistent id: ns:nsvc_inv-nsei
Error: no ID for constraint linkend: ns:nsvc_lost:alive.
XRef to nonexistent id: ns:nsvc_lost:alive
Error: no ID for constraint linkend: ns:nsvc_lost:reset.
XRef to nonexistent id: ns:nsvc_lost:reset
Error: no ID for constraint linkend: ns:nse_packets:in.
XRef to nonexistent id: ns:nse_packets:in
Error: no ID for constraint linkend: ns:nse_packets:out.
XRef to nonexistent id: ns:nse_packets:out
Error: no ID for constraint linkend: ns:nse_packets:out:drop.
XRef to nonexistent id: ns:nse_packets:out:drop
Error: no ID for constraint linkend: ns:nse_bytes:in.
XRef to nonexistent id: ns:nse_bytes:in
Error: no ID for constraint linkend: ns:nse_bytes:out.
XRef to nonexistent id: ns:nse_bytes:out
Error: no ID for constraint linkend: ns:nse_bytes:out:drop.
XRef to nonexistent id: ns:nse_bytes:out:drop
Error: no ID for constraint linkend: ns:nse_blocked.
XRef to nonexistent id: ns:nse_blocked
Error: no ID for constraint linkend: ns:nse_unblocked.
XRef to nonexistent id: ns:nse_unblocked
Error: no ID for constraint linkend: ns:nse_dead.
XRef to nonexistent id: ns:nse_dead
Error: no ID for constraint linkend: ns:nse_replaced.
XRef to nonexistent id: ns:nse_replaced
Error: no ID for constraint linkend: ns:nse_nsei-chg.
XRef to nonexistent id: ns:nse_nsei-chg
Error: no ID for constraint linkend: ns:nse_inv-nsvci.
XRef to nonexistent id: ns:nse_inv-nsvci
Error: no ID for constraint linkend: ns:nse_inv-nsei.
XRef to nonexistent id: ns:nse_inv-nsei
Error: no ID for constraint linkend: ns:nse_lost:alive.
XRef to nonexistent id: ns:nse_lost:alive
Error: no ID for constraint linkend: ns:nse_lost:reset.
XRef to nonexistent id: ns:nse_lost:reset
Error: no ID for constraint linkend: pcu:sgsn_rx_paging_cs.
XRef to nonexistent id: pcu:sgsn_rx_paging_cs
Error: no ID for constraint linkend: pcu:sgsn_rx_paging_ps.
XRef to nonexistent id: pcu:sgsn_rx_paging_ps
Error: no ID for constraint linkend: bssgp:bss_ctx_packets:in.
XRef to nonexistent id: bssgp:bss_ctx_packets:in
Error: no ID for constraint linkend: bssgp:bss_ctx_packets:out.
XRef to nonexistent id: bssgp:bss_ctx_packets:out
Error: no ID for constraint linkend: bssgp:bss_ctx_bytes:in.
XRef to nonexistent id: bssgp:bss_ctx_bytes:in
Error: no ID for constraint linkend: bssgp:bss_ctx_bytes:out.
XRef to nonexistent id: bssgp:bss_ctx_bytes:out
Error: no ID for constraint linkend: bssgp:bss_ctx_blocked.
XRef to nonexistent id: bssgp:bss_ctx_blocked
Error: no ID for constraint linkend: bssgp:bss_ctx_discarded.
XRef to nonexistent id: bssgp:bss_ctx_discarded
Error: no ID for constraint linkend: bssgp:bss_ctx_status.
XRef to nonexistent id: bssgp:bss_ctx_status
Error: no ID for constraint linkend: bts_tbf:dl:alloc.
XRef to nonexistent id: bts_tbf:dl:alloc
Error: no ID for constraint linkend: bts_tbf:dl:freed.
XRef to nonexistent id: bts_tbf:dl:freed
Error: no ID for constraint linkend: bts_tbf:dl:aborted.
XRef to nonexistent id: bts_tbf:dl:aborted
Error: no ID for constraint linkend: bts_tbf:ul:alloc.
XRef to nonexistent id: bts_tbf:ul:alloc
Error: no ID for constraint linkend: bts_tbf:ul:freed.
XRef to nonexistent id: bts_tbf:ul:freed
Error: no ID for constraint linkend: bts_tbf:ul:aborted.
XRef to nonexistent id: bts_tbf:ul:aborted
Error: no ID for constraint linkend: bts_tbf:reused.
XRef to nonexistent id: bts_tbf:reused
Error: no ID for constraint linkend: bts_tbf:alloc:algo-a.
XRef to nonexistent id: bts_tbf:alloc:algo-a
Error: no ID for constraint linkend: bts_tbf:alloc:algo-b.
XRef to nonexistent id: bts_tbf:alloc:algo-b
Error: no ID for constraint linkend: bts_tbf:alloc:failed.
XRef to nonexistent id: bts_tbf:alloc:failed
Error: no ID for constraint linkend: bts_tbf:alloc:failed:no_tfi.
XRef to nonexistent id: bts_tbf:alloc:failed:no_tfi
Error: no ID for constraint linkend: bts_tbf:alloc:failed:no_usf.
XRef to nonexistent id: bts_tbf:alloc:failed:no_usf
Error: no ID for constraint linkend: bts_tbf:alloc:failed:no_slot_combi.
XRef to nonexistent id: bts_tbf:alloc:failed:no_slot_combi
Error: no ID for constraint linkend: bts_tbf:alloc:failed:no_slot_avail.
XRef to nonexistent id: bts_tbf:alloc:failed:no_slot_avail
Error: no ID for constraint linkend: bts_rlc:sent.
XRef to nonexistent id: bts_rlc:sent
Error: no ID for constraint linkend: bts_rlc:resent.
XRef to nonexistent id: bts_rlc:resent
Error: no ID for constraint linkend: bts_rlc:restarted.
XRef to nonexistent id: bts_rlc:restarted
Error: no ID for constraint linkend: bts_rlc:stalled.
XRef to nonexistent id: bts_rlc:stalled
Error: no ID for constraint linkend: bts_rlc:nacked.
XRef to nonexistent id: bts_rlc:nacked
Error: no ID for constraint linkend: bts_rlc:final_block_resent.
XRef to nonexistent id: bts_rlc:final_block_resent
Error: no ID for constraint linkend: bts_rlc:ass:timedout.
XRef to nonexistent id: bts_rlc:ass:timedout
Error: no ID for constraint linkend: bts_rlc:ass:failed.
XRef to nonexistent id: bts_rlc:ass:failed
Error: no ID for constraint linkend: bts_rlc:ack:timedout.
XRef to nonexistent id: bts_rlc:ack:timedout
Error: no ID for constraint linkend: bts_rlc:ack:failed.
XRef to nonexistent id: bts_rlc:ack:failed
Error: no ID for constraint linkend: bts_rlc:rel:timedout.
XRef to nonexistent id: bts_rlc:rel:timedout
Error: no ID for constraint linkend: bts_rlc:late-block.
XRef to nonexistent id: bts_rlc:late-block
Error: no ID for constraint linkend: bts_rlc:sent-dummy.
XRef to nonexistent id: bts_rlc:sent-dummy
Error: no ID for constraint linkend: bts_rlc:sent-control.
XRef to nonexistent id: bts_rlc:sent-control
Error: no ID for constraint linkend: bts_rlc:dl_bytes.
XRef to nonexistent id: bts_rlc:dl_bytes
Error: no ID for constraint linkend: bts_rlc:dl_payload_bytes.
XRef to nonexistent id: bts_rlc:dl_payload_bytes
Error: no ID for constraint linkend: bts_rlc:ul_bytes.
XRef to nonexistent id: bts_rlc:ul_bytes
Error: no ID for constraint linkend: bts_rlc:ul_payload_bytes.
XRef to nonexistent id: bts_rlc:ul_payload_bytes
Error: no ID for constraint linkend: bts_decode:errors.
XRef to nonexistent id: bts_decode:errors
Error: no ID for constraint linkend: bts_sba:allocated.
XRef to nonexistent id: bts_sba:allocated
Error: no ID for constraint linkend: bts_sba:freed.
XRef to nonexistent id: bts_sba:freed
Error: no ID for constraint linkend: bts_sba:timedout.
XRef to nonexistent id: bts_sba:timedout
Error: no ID for constraint linkend: bts_llc:timeout.
XRef to nonexistent id: bts_llc:timeout
Error: no ID for constraint linkend: bts_llc:dropped.
XRef to nonexistent id: bts_llc:dropped
Error: no ID for constraint linkend: bts_llc:scheduled.
XRef to nonexistent id: bts_llc:scheduled
Error: no ID for constraint linkend: bts_llc:dl_bytes.
XRef to nonexistent id: bts_llc:dl_bytes
Error: no ID for constraint linkend: bts_llc:ul_bytes.
XRef to nonexistent id: bts_llc:ul_bytes
Error: no ID for constraint linkend: bts_pch:requests.
XRef to nonexistent id: bts_pch:requests
Error: no ID for constraint linkend: bts_pch:requests:timeout.
XRef to nonexistent id: bts_pch:requests:timeout
Error: no ID for constraint linkend: bts_rach:requests.
XRef to nonexistent id: bts_rach:requests
Error: no ID for constraint linkend: bts_rach:requests:11bit.
XRef to nonexistent id: bts_rach:requests:11bit
Error: no ID for constraint linkend: bts_rach:requests:one_phase.
XRef to nonexistent id: bts_rach:requests:one_phase
Error: no ID for constraint linkend: bts_rach:requests:two_phase.
XRef to nonexistent id: bts_rach:requests:two_phase
Error: no ID for constraint linkend: bts_rach:requests:unexpected.
XRef to nonexistent id: bts_rach:requests:unexpected
Error: no ID for constraint linkend: bts_spb:uplink_first_segment.
XRef to nonexistent id: bts_spb:uplink_first_segment
Error: no ID for constraint linkend: bts_spb:uplink_second_segment.
XRef to nonexistent id: bts_spb:uplink_second_segment
Error: no ID for constraint linkend: bts_spb:downlink_first_segment.
XRef to nonexistent id: bts_spb:downlink_first_segment
Error: no ID for constraint linkend: bts_spb:downlink_second_segment.
XRef to nonexistent id: bts_spb:downlink_second_segment
Error: no ID for constraint linkend: bts_immediate:assignment_UL.
XRef to nonexistent id: bts_immediate:assignment_UL
Error: no ID for constraint linkend: bts_immediate:assignment_ul:one_phase.
XRef to nonexistent id: bts_immediate:assignment_ul:one_phase
Error: no ID for constraint linkend: bts_immediate:assignment_ul:two_phase.
XRef to nonexistent id: bts_immediate:assignment_ul:two_phase
Error: no ID for constraint linkend: bts_immediate:assignment_ul:contention_resolution_success.
XRef to nonexistent id: bts_immediate:assignment_ul:contention_resolution_success
Error: no ID for constraint linkend: bts_immediate:assignment_rej.
XRef to nonexistent id: bts_immediate:assignment_rej
Error: no ID for constraint linkend: bts_immediate:assignment_DL.
XRef to nonexistent id: bts_immediate:assignment_DL
Error: no ID for constraint linkend: bts_channel:request_description.
XRef to nonexistent id: bts_channel:request_description
Error: no ID for constraint linkend: bts_pkt:ul_assignment.
XRef to nonexistent id: bts_pkt:ul_assignment
Error: no ID for constraint linkend: bts_pkt:access_reject.
XRef to nonexistent id: bts_pkt:access_reject
Error: no ID for constraint linkend: bts_pkt:dl_assignment.
XRef to nonexistent id: bts_pkt:dl_assignment
Error: no ID for constraint linkend: bts_pkt:cell_chg_notification.
XRef to nonexistent id: bts_pkt:cell_chg_notification
Error: no ID for constraint linkend: bts_pkt:cell_chg_continue.
XRef to nonexistent id: bts_pkt:cell_chg_continue
Error: no ID for constraint linkend: bts_pkt:neigh_cell_data.
XRef to nonexistent id: bts_pkt:neigh_cell_data
Error: no ID for constraint linkend: bts_ul:control.
XRef to nonexistent id: bts_ul:control
Error: no ID for constraint linkend: bts_ul:assignment_poll_timeout.
XRef to nonexistent id: bts_ul:assignment_poll_timeout
Error: no ID for constraint linkend: bts_ul:assignment_failed.
XRef to nonexistent id: bts_ul:assignment_failed
Error: no ID for constraint linkend: bts_dl:assignment_timeout.
XRef to nonexistent id: bts_dl:assignment_timeout
Error: no ID for constraint linkend: bts_dl:assignment_failed.
XRef to nonexistent id: bts_dl:assignment_failed
Error: no ID for constraint linkend: bts_pkt:ul_ack_nack_timeout.
XRef to nonexistent id: bts_pkt:ul_ack_nack_timeout
Error: no ID for constraint linkend: bts_pkt:ul_ack_nack_failed.
XRef to nonexistent id: bts_pkt:ul_ack_nack_failed
Error: no ID for constraint linkend: bts_pkt:dl_ack_nack_timeout.
XRef to nonexistent id: bts_pkt:dl_ack_nack_timeout
Error: no ID for constraint linkend: bts_pkt:dl_ack_nack_failed.
XRef to nonexistent id: bts_pkt:dl_ack_nack_failed
Error: no ID for constraint linkend: bts_gprs:downlink_cs1.
XRef to nonexistent id: bts_gprs:downlink_cs1
Error: no ID for constraint linkend: bts_gprs:downlink_cs2.
XRef to nonexistent id: bts_gprs:downlink_cs2
Error: no ID for constraint linkend: bts_gprs:downlink_cs3.
XRef to nonexistent id: bts_gprs:downlink_cs3
Error: no ID for constraint linkend: bts_gprs:downlink_cs4.
XRef to nonexistent id: bts_gprs:downlink_cs4
Error: no ID for constraint linkend: bts_egprs:downlink_mcs1.
XRef to nonexistent id: bts_egprs:downlink_mcs1
Error: no ID for constraint linkend: bts_egprs:downlink_mcs2.
XRef to nonexistent id: bts_egprs:downlink_mcs2
Error: no ID for constraint linkend: bts_egprs:downlink_mcs3.
XRef to nonexistent id: bts_egprs:downlink_mcs3
Error: no ID for constraint linkend: bts_egprs:downlink_mcs4.
XRef to nonexistent id: bts_egprs:downlink_mcs4
Error: no ID for constraint linkend: bts_egprs:downlink_mcs5.
XRef to nonexistent id: bts_egprs:downlink_mcs5
Error: no ID for constraint linkend: bts_egprs:downlink_mcs6.
XRef to nonexistent id: bts_egprs:downlink_mcs6
Error: no ID for constraint linkend: bts_egprs:downlink_mcs7.
XRef to nonexistent id: bts_egprs:downlink_mcs7
Error: no ID for constraint linkend: bts_egprs:downlink_mcs8.
XRef to nonexistent id: bts_egprs:downlink_mcs8
Error: no ID for constraint linkend: bts_egprs:downlink_mcs9.
XRef to nonexistent id: bts_egprs:downlink_mcs9
Error: no ID for constraint linkend: bts_gprs:uplink_cs1.
XRef to nonexistent id: bts_gprs:uplink_cs1
Error: no ID for constraint linkend: bts_gprs:uplink_cs2.
XRef to nonexistent id: bts_gprs:uplink_cs2
Error: no ID for constraint linkend: bts_gprs:uplink_cs3.
XRef to nonexistent id: bts_gprs:uplink_cs3
Error: no ID for constraint linkend: bts_gprs:uplink_cs4.
XRef to nonexistent id: bts_gprs:uplink_cs4
Error: no ID for constraint linkend: bts_egprs:uplink_mcs1.
XRef to nonexistent id: bts_egprs:uplink_mcs1
Error: no ID for constraint linkend: bts_egprs:uplink_mcs2.
XRef to nonexistent id: bts_egprs:uplink_mcs2
Error: no ID for constraint linkend: bts_egprs:uplink_mcs3.
XRef to nonexistent id: bts_egprs:uplink_mcs3
Error: no ID for constraint linkend: bts_egprs:uplink_mcs4.
XRef to nonexistent id: bts_egprs:uplink_mcs4
Error: no ID for constraint linkend: bts_egprs:uplink_mcs5.
XRef to nonexistent id: bts_egprs:uplink_mcs5
Error: no ID for constraint linkend: bts_egprs:uplink_mcs6.
XRef to nonexistent id: bts_egprs:uplink_mcs6
Error: no ID for constraint linkend: bts_egprs:uplink_mcs7.
XRef to nonexistent id: bts_egprs:uplink_mcs7
Error: no ID for constraint linkend: bts_egprs:uplink_mcs8.
XRef to nonexistent id: bts_egprs:uplink_mcs8
Error: no ID for constraint linkend: bts_egprs:uplink_mcs9.
XRef to nonexistent id: bts_egprs:uplink_mcs9
Error: no ID for constraint linkend: ns.nsvc_alive.delay.
XRef to nonexistent id: ns.nsvc_alive.delay
Error: no ID for constraint linkend: ns.bind_tx_backlog_length.
XRef to nonexistent id: ns.bind_tx_backlog_length
Error: no ID for constraint linkend: bts_ms.present.
XRef to nonexistent id: bts_ms.present
Error: no ID for constraint linkend: bts_pdch.available.
XRef to nonexistent id: bts_pdch.available
Error: no ID for constraint linkend: bts_pdch.occupied.
XRef to nonexistent id: bts_pdch.occupied
Error: no ID for constraint linkend: bts_pdch.occupied.gprs.
XRef to nonexistent id: bts_pdch.occupied.gprs
Error: no ID for constraint linkend: bts_pdch.occupied.egprs.
XRef to nonexistent id: bts_pdch.occupied.egprs
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/doc/manuals/osmopcu-usermanual__1.svg
rsvg-convert -a -f pdf -o fig1.pdf /build/doc/manuals/osmopcu-usermanual__2.svg
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
rsvg-convert -a -f pdf -o fig2.pdf /build/doc/manuals/osmopcu-usermanual__3.svg
Build osmopcu-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmopcu-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmp5d2p7mqg/osmopcu-usermanual.idx is empty
osmopcu-usermanual.aux MD5 checksum changed
osmopcu-usermanual.toc MD5 checksum changed
the /tmp/tmp5d2p7mqg/osmopcu-usermanual.aux file has changed
pdflatex -interaction=batchmode osmopcu-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmp5d2p7mqg/osmopcu-usermanual.idx is empty
osmopcu-usermanual.aux MD5 checksum changed
the /tmp/tmp5d2p7mqg/osmopcu-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmopcu-usermanual.pdf' successfully built

a2x: deleting /build/doc/manuals/osmopcu-usermanual.xml
make[3]: Leaving directory '/build/doc/manuals'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making all in tests
make[2]: Entering directory '/build/tests'
  CXX      test_replay_gprs_attach.o
  CC       openbsc_clone.o
  CXX      pcu_emu.o
  CXX      test_pdp_activation.o
  CXXLD    emu/pcu_emu
make[2]: Leaving directory '/build/tests'
Making all in contrib
make[2]: Entering directory '/build/contrib'
Making all in systemd
make[3]: Entering directory '/build/contrib/systemd'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/contrib/systemd'
make[3]: Entering directory '/build/contrib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/contrib'
make[2]: Leaving directory '/build/contrib'
make[2]: Entering directory '/build'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ DISTCHECK_CONFIGURE_FLAGS= --enable-werror --enable-sanitize --enable-er-e1-ccu --enable-manuals make -j 12 distcheck
make  dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make  distdir-am
make[2]: Entering directory '/build'
if test -d "osmo-pcu-1.5.0.4-8734"; then find "osmo-pcu-1.5.0.4-8734" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.4-8734" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.4-8734"; }; else :; fi
test -d "osmo-pcu-1.5.0.4-8734" || mkdir "osmo-pcu-1.5.0.4-8734"
 (cd include && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/include \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/include'
make  distdir-am
make[4]: Entering directory '/build/include'
make[4]: Leaving directory '/build/include'
make[3]: Leaving directory '/build/include'
 (cd src && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/src \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/src'
make  distdir-am
make[4]: Entering directory '/build/src'
make[4]: Leaving directory '/build/src'
make[3]: Leaving directory '/build/src'
 (cd doc && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/doc \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make  distdir-am
make[4]: Entering directory '/build/doc'
 (cd examples && make  top_distdir=../../osmo-pcu-1.5.0.4-8734 distdir=../../osmo-pcu-1.5.0.4-8734/doc/examples \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/examples'
make  distdir-am
make[6]: Entering directory '/build/doc/examples'
make[6]: Leaving directory '/build/doc/examples'
make[5]: Leaving directory '/build/doc/examples'
 (cd manuals && make  top_distdir=../../osmo-pcu-1.5.0.4-8734 distdir=../../osmo-pcu-1.5.0.4-8734/doc/manuals \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/manuals'
make  distdir-am
make[6]: Entering directory '/build/doc/manuals'
make[6]: Leaving directory '/build/doc/manuals'
make[5]: Leaving directory '/build/doc/manuals'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
 (cd tests && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/tests \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/tests'
make  distdir-am
make[4]: Entering directory '/build/tests'
:;{ \
               echo '# Signature of the current package.' && \
               echo 'm4_define([AT_PACKAGE_NAME],' && \
               echo '  [osmo-pcu])' && \
               echo 'm4_define([AT_PACKAGE_TARNAME],' && \
               echo '  [osmo-pcu])' && \
               echo 'm4_define([AT_PACKAGE_VERSION],' && \
               echo '  [1.5.0.4-8734])' && \
               echo 'm4_define([AT_PACKAGE_STRING],' && \
               echo '  [osmo-pcu 1.5.0.4-8734])' && \
               echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \
               echo '  [osmocom-net-gprs@lists.osmocom.org])'; \
               echo 'm4_define([AT_PACKAGE_URL],' && \
               echo '  [])'; \
             } >'./package.m4'
/bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at
mv testsuite.tmp testsuite
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
 (cd contrib && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/contrib \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/contrib'
make  distdir-am
make[4]: Entering directory '/build/contrib'
 (cd systemd && make  top_distdir=../../osmo-pcu-1.5.0.4-8734 distdir=../../osmo-pcu-1.5.0.4-8734/contrib/systemd \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/contrib/systemd'
make  distdir-am
make[6]: Entering directory '/build/contrib/systemd'
make[6]: Leaving directory '/build/contrib/systemd'
make[5]: Leaving directory '/build/contrib/systemd'
make[4]: Leaving directory '/build/contrib'
make[3]: Leaving directory '/build/contrib'
make  \
  top_distdir="osmo-pcu-1.5.0.4-8734" distdir="osmo-pcu-1.5.0.4-8734" \
  dist-hook
make[3]: Entering directory '/build'
echo 1.5.0.4-8734 > osmo-pcu-1.5.0.4-8734/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "osmo-pcu-1.5.0.4-8734" -type d ! -perm -755 \
	-exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-pcu-1.5.0.4-8734"
make[2]: Leaving directory '/build'
tardir=osmo-pcu-1.5.0.4-8734 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-pcu-1.5.0.4-8734.tar.bz2
tardir=osmo-pcu-1.5.0.4-8734 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-pcu-1.5.0.4-8734.tar.gz
make[1]: Leaving directory '/build'
if test -d "osmo-pcu-1.5.0.4-8734"; then find "osmo-pcu-1.5.0.4-8734" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.4-8734" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.4-8734"; }; else :; fi
case 'osmo-pcu-1.5.0.4-8734.tar.gz osmo-pcu-1.5.0.4-8734.tar.bz2' in \
*.tar.gz*) \
  eval GZIP= gzip --best -dc osmo-pcu-1.5.0.4-8734.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
  bzip2 -dc osmo-pcu-1.5.0.4-8734.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
  lzip -dc osmo-pcu-1.5.0.4-8734.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
  xz -dc osmo-pcu-1.5.0.4-8734.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
  uncompress -c osmo-pcu-1.5.0.4-8734.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
  eval GZIP= gzip --best -dc osmo-pcu-1.5.0.4-8734.shar.gz | unshar ;;\
*.zip*) \
  unzip osmo-pcu-1.5.0.4-8734.zip ;;\
*.tar.zst*) \
  zstd -dc osmo-pcu-1.5.0.4-8734.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w osmo-pcu-1.5.0.4-8734
chmod u+w osmo-pcu-1.5.0.4-8734
mkdir osmo-pcu-1.5.0.4-8734/_build osmo-pcu-1.5.0.4-8734/_build/sub osmo-pcu-1.5.0.4-8734/_inst
chmod a-w osmo-pcu-1.5.0.4-8734
test -d osmo-pcu-1.5.0.4-8734/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.4-8734/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
  && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
  && am__cwd=`pwd` \
  && CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.4-8734/_build/sub \
  && ../../configure \
    --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \
     --enable-werror --enable-sanitize --enable-er-e1-ccu --enable-manuals \
    --srcdir=../.. --prefix="$dc_install_base" \
  && make  \
  && make  dvi \
  && make  check \
  && make  install \
  && make  installcheck \
  && make  uninstall \
  && make  distuninstallcheck_dir="$dc_install_base" \
        distuninstallcheck \
  && chmod -R a-w "$dc_install_base" \
  && ({ \
       (cd ../.. && umask 077 && mkdir "$dc_destdir") \
       && make  DESTDIR="$dc_destdir" install \
       && make  DESTDIR="$dc_destdir" uninstall \
       && make  DESTDIR="$dc_destdir" \
            distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
      } || { rm -rf "$dc_destdir"; exit 1; }) \
  && rm -rf "$dc_destdir" \
  && make  dist \
  && rm -rf osmo-pcu-1.5.0.4-8734.tar.gz osmo-pcu-1.5.0.4-8734.tar.bz2 \
  && make  distcleancheck \
  && cd "$am__cwd" \
  || exit 1
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... unsupported
checking for g++ option to enable C++98 features... none needed
checking dependency style of g++... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmogb >= 1.10.0... yes
checking whether to enable direct DSP access for PDCH of sysmocom-bts... unset
checking whether to enable direct PHY access for PDCH of NuRAN Wireless Litecell 1.5 BTS... no
checking whether to enable direct PHY access for PDCH of NuRAN Wireless OC-2G BTS... no
checking whether to enable direct E1 CCU access for PDCH of Ericsson RBS... yes
checking for libosmoabis >= 1.6.0... yes
checking for libosmotrau >= 1.6.0... yes
checking whether to enable VTY tests... no
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CXXFLAGS=" -std=gnu++03 -fsanitize=address -fsanitize=undefined"
LDFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating tests/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make  all-recursive
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making all in include
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making all in src
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
  CXX      pcu_main.o
  CXX      alloc_algo.lo
  CC       gprs_debug.lo
  CC       csn1.lo
  CC       csn1_dec.lo
  CC       csn1_enc.lo
  CC       gsm_rlcmac.lo
  CC       gprs_bssgp_pcu.lo
  CC       gprs_bssgp_rim.lo
  CC       gprs_rlcmac.lo
  CXX      gprs_rlcmac_sched.lo
  CXX      gprs_rlcmac_meas.lo
  CC       gprs_ms.lo
  CC       gprs_pcu.lo
  CXX      pcu_l1_if.lo
  CC       pcu_vty.lo
  CXX      pcu_vty_functions.lo
  CC       mslot_class.lo
  CC       neigh_cache.lo
  CC       nacc_fsm.lo
  CXX      tbf.lo
  CC       tbf_fsm.lo
  CXX      tbf_ul.lo
  CC       tbf_ul_fsm.lo
  CC       tbf_ul_ack_fsm.lo
  CC       tbf_ul_ass_fsm.lo
  CXX      tbf_dl.lo
  CC       tbf_dl_fsm.lo
  CC       tbf_dl_ass_fsm.lo
  CXX      bts.lo
  CC       bts_pch_timer.lo
  CXX      pdch.lo
  CC       pdch_ul_controller.lo
  CXX      encoding.lo
  CC       sba.lo
  CXX      decoding.lo
  CC       llc.lo
  CXX      rlc.lo
  CXX      rlc_window.lo
  CXX      rlc_window_dl.lo
  CXX      rlc_window_ul.lo
  CC       pcuif_sock.lo
  CC       gprs_codel.lo
  CC       coding_scheme.lo
  CXX      egprs_rlc_compression.lo
  CC       ericsson-rbs/er_ccu_l1_if.o
  CC       ericsson-rbs/er_ccu_if.o
  CXXLD    libgprs.la
copying selected object files to avoid basename conflicts...
  CXXLD    osmo-pcu
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making all in doc
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making all in examples
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making all in manuals
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
ln -s /opt/osmo-gsm-manuals/build build
ln -s /opt/osmo-gsm-manuals/common common
mkdir -p generated
xmllint --xinclude --postvalid --noout ../../../../doc/manuals/osmopcu-vty-reference.xml
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh "/opt/osmo-gsm-manuals/merge_doc.xsl" \
	$(/opt/osmo-gsm-manuals/build/find_existing_path.sh "vty/*reference.xml" . ../../../../doc/manuals) \
	/opt/osmo-gsm-manuals/common/vty_additions.xml \
	../../../../doc/manuals/vty/*additions*.xml > generated/combined.xml
+ mktemp
+ combined=/tmp/tmp.vj5F5qi6Yl
+ mktemp
+ combine_src=/tmp/tmp.lJbEyNrEQc
+ cp ../../../../doc/manuals/vty/pcu_vty_reference.xml /tmp/tmp.vj5F5qi6Yl
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.vj5F5qi6Yl /tmp/tmp.lJbEyNrEQc
+ xsltproc -o /tmp/tmp.vj5F5qi6Yl --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.lJbEyNrEQc
+ [ -n ../../../../doc/manuals/vty/osmo-pcu_vty_additions.xml ]
+ realpath ../../../../doc/manuals/vty/osmo-pcu_vty_additions.xml
+ addition=/build/osmo-pcu-1.5.0.4-8734/doc/manuals/vty/osmo-pcu_vty_additions.xml
+ shift
+ cp /tmp/tmp.vj5F5qi6Yl /tmp/tmp.lJbEyNrEQc
if ! [ -f osmopcu-usermanual.adoc ]; then \
	ln -s ../../../../doc/manuals/osmopcu-usermanual.adoc osmopcu-usermanual.adoc; \
fi
if ! [ -f osmopcu-gb.adoc ]; then \
	ln -s ../../../../doc/manuals/osmopcu-gb.adoc osmopcu-gb.adoc; \
fi
+ xsltproc -o /tmp/tmp.vj5F5qi6Yl --stringparam with /build/osmo-pcu-1.5.0.4-8734/doc/manuals/vty/osmo-pcu_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.lJbEyNrEQc
TEXINPUTS="/opt/osmo-gsm-manuals" \
	a2x -vv -L --asciidoc-opts="-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' " --dblatex-opts="--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 " -a docinfo -a revnumber="DRAFT 1.5.0-4-g8734" -a revdate="2024-Jul-31" osmopcu-usermanual.adoc
TEXINPUTS="/opt/osmo-gsm-manuals" \
	a2x -vv -L --asciidoc-opts="-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' " --dblatex-opts="--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 " -a docinfo -a revnumber="DRAFT 1.5.0-4-g8734" -a revdate="2024-Jul-31" osmopcu-gb.adoc
+ [ -n  ]
+ cat /tmp/tmp.vj5F5qi6Yl
+ rm -f /tmp/tmp.lJbEyNrEQc
+ rm -f /tmp/tmp.vj5F5qi6Yl
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl generated/combined.xml \
	> generated/docbook_vty.xml
set -x && \
export GIT_DATE="unknown" && \
export REVNUMBER="DRAFT 1.5.0-4-g8734" && \
export TEMPFILE="/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/generated/_temp_osmopcu-vty-reference.xml" && \
/opt/osmo-gsm-manuals/build/docbook-set-revhistory.py "../../../../doc/manuals/osmopcu-vty-reference.xml" && \
dblatex \
	--config /opt/osmo-gsm-manuals/build/dblatex_config.xml \
	--xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/generated" \
	 \
	-P draft.mode=no \
	-o osmopcu-vty-reference.pdf \
	"$TEMPFILE" && \
rm $TEMPFILE
+ export GIT_DATE=unknown
+ GIT_DATE=unknown
+ export 'REVNUMBER=DRAFT 1.5.0-4-g8734'
+ REVNUMBER='DRAFT 1.5.0-4-g8734'
+ export TEMPFILE=/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/generated/_temp_osmopcu-vty-reference.xml
+ TEMPFILE=/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/generated/_temp_osmopcu-vty-reference.xml
+ /opt/osmo-gsm-manuals/build/docbook-set-revhistory.py ../../../../doc/manuals/osmopcu-vty-reference.xml
Changing revhistory to DRAFT 1.5.0-4-g8734, unknown...
+ dblatex --config /opt/osmo-gsm-manuals/build/dblatex_config.xml '--xslt-opts=--path /opt/osmo-gsm-manuals/common/chapters:/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/generated' -P draft.mode=no -o osmopcu-vty-reference.pdf /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/generated/_temp_osmopcu-vty-reference.xml
asciidoc: reading: /etc/asciidoc/asciidoc.conf
asciidoc: reading: /etc/asciidoc/asciidoc.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/asciidoc.conf
asciidoc: reading: /etc/asciidoc/asciidoc.conf
asciidoc: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb.adoc
asciidoc: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.adoc
asciidoc: reading: /etc/asciidoc/docbook45.conf
asciidoc: reading: /etc/asciidoc/docbook45.conf
asciidoc: reading: /etc/asciidoc/filters/music/music-filter.conf
asciidoc: reading: /etc/asciidoc/filters/music/music-filter.conf
asciidoc: reading: /etc/asciidoc/filters/latex/latex-filter.conf
asciidoc: reading: /etc/asciidoc/filters/latex/latex-filter.conf
asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf
asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf
asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf
asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf
asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/lang-en.conf
asciidoc: reading: /etc/asciidoc/lang-en.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: writing: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb.xml
asciidoc: writing: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml
asciidoc: osmopcu-gb.adoc: line 5: evaluating: {include:/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb-docinfo.xml}
asciidoc: WARNING: osmopcu-gb.adoc: line 5: {include:/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb-docinfo.xml}: file does not exist
asciidoc: osmopcu-usermanual.adoc: line 5: evaluating: {include:/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual-docinfo.xml}
asciidoc: WARNING: osmopcu-usermanual.adoc: line 5: {include:/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual-docinfo.xml}: file does not exist
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/preface.adoc
asciidoc: osmopcu-usermanual.adoc: line 8: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/preface.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/gb/gb-startup.msc
asciidoc: osmopcu-gb.adoc: line 63: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/gb/gb-startup.msc
asciidoc: osmopcu-gb.adoc: line 62: evaluating: {counter2:target-number}
asciidoc: osmopcu-gb.adoc: line 62: evaluating: {set2:target:osmopcu-gb__1.svg}
asciidoc: gb-startup.msc: line 27: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb__1.svg" -Tsvg -
Build the book set list...
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/gb/ns.adoc
asciidoc: osmopcu-gb.adoc: line 87: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/gb/ns.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/overview.adoc
asciidoc: osmopcu-usermanual.adoc: line 10: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/overview.adoc
asciidoc: overview.adoc: line 20: evaluating: {counter2:target-number}
asciidoc: overview.adoc: line 20: evaluating: {set2:target:osmopcu-usermanual__1.svg}
asciidoc: overview.adoc: line 34: filtering: dot -o "/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual__1.svg" -T svg && echo " "
asciidoc: overview.adoc: line 57: evaluating: {counter2:target-number}
asciidoc: overview.adoc: line 57: evaluating: {set2:target:osmopcu-usermanual__2.svg}
asciidoc: overview.adoc: line 71: filtering: dot -o "/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual__2.svg" -T svg && echo " "
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/running.adoc
asciidoc: osmopcu-usermanual.adoc: line 12: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/running.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/vty.adoc
asciidoc: osmopcu-usermanual.adoc: line 14: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/vty.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/gb/bssgp.adoc
asciidoc: osmopcu-gb.adoc: line 89: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/gb/bssgp.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/logging.adoc
asciidoc: osmopcu-usermanual.adoc: line 16: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/logging.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/configuration.adoc
asciidoc: osmopcu-usermanual.adoc: line 18: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/configuration.adoc
Build the listings...
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/counters.adoc
asciidoc: osmopcu-usermanual.adoc: line 20: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/counters.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/doc/manuals/chapters/counters_generated.adoc
asciidoc: counters.adoc: line 4: reading: /build/osmo-pcu-1.5.0.4-8734/doc/manuals/chapters/counters_generated.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: osmopcu-gb.adoc: line 91: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/glossary.adoc
asciidoc: osmopcu-gb.adoc: line 93: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/glossary.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/code-architecture.adoc
asciidoc: osmopcu-usermanual.adoc: line 22: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/code-architecture.adoc
asciidoc: code-architecture.adoc: line 7: evaluating: {counter2:target-number}
asciidoc: code-architecture.adoc: line 7: evaluating: {set2:target:osmopcu-usermanual__3.svg}
asciidoc: code-architecture.adoc: line 70: filtering: dot -o "/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual__3.svg" -T svg && echo " "
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/gb.adoc
asciidoc: osmopcu-usermanual.adoc: line 24: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/gb.adoc
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/qos-dscp-pcp.adoc
asciidoc: osmopcu-usermanual.adoc: line 26: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/qos-dscp-pcp.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/gfdl.adoc
asciidoc: osmopcu-gb.adoc: line 95: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/gfdl.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/qos-example.adoc
asciidoc: qos-dscp-pcp.adoc: line 161: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals/chapters/qos-example.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/vty_cpu_sched.adoc
asciidoc: osmopcu-usermanual.adoc: line 28: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/vty_cpu_sched.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: osmopcu-usermanual.adoc: line 30: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/bibliography.adoc
asciidoc: osmopcu-usermanual.adoc: line 32: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/bibliography.adoc
Build _temp_osmopcu-vty-reference.pdf
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/glossary.adoc
asciidoc: osmopcu-usermanual.adoc: line 34: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/glossary.adoc
asciidoc: include: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/gfdl.adoc
asciidoc: osmopcu-usermanual.adoc: line 36: reading: /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/common/chapters/gfdl.adoc
a2x: args: ['-vv', '-L', "--asciidoc-opts=-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' ", '--dblatex-opts=--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 ', '-a', 'docinfo', '-a', 'revnumber=DRAFT 1.5.0-4-g8734', '-a', 'revdate=2024-Jul-31', 'osmopcu-gb.adoc']
a2x: resource files: []
a2x: resource directories: ['/etc/asciidoc/stylesheets']
a2x: executing: asciidoc ['-f', '/opt/osmo-gsm-manuals/build/mscgen-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/diag-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf', '-f', '/opt/osmo-gsm-manuals/build/graphviz-filter.conf', '-a', 'srcdir=/build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals', '-a', 'commondir=/opt/osmo-gsm-manuals/common', ('--attribute', 'docinfo'), ('--attribute', 'revnumber=DRAFT 1.5.0-4-g8734'), ('--attribute', 'revdate=2024-Jul-31'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=pdf'), ('--out-file', '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb.xml')]
a2x: executing: "dblatex" -t pdf -p "/etc/asciidoc/dblatex/asciidoc-dblatex.xsl" -s "/etc/asciidoc/dblatex/asciidoc-dblatex.sty" --config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0  -V  "/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb.xml"

Build the book set list...
xsltproc -o doclist.txt --xinclude --xincludestyle doclist.xsl /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb.xml
Build the listings...
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals' /usr/share/dblatex/xsl/common/mklistings.xsl /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb.xml
xsltproc -o osmopcu-gb.rtex --xinclude --xincludestyle --param listings.xml '/tmp/tmpx6g3j8sm/listings.xml' --param current.dir '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals' /tmp/tmpx6g3j8sm/custom.xsl /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb.xml
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Error: no ID for constraint linkend: sns_size.
XRef to nonexistent id: sns_size
Error: no ID for constraint linkend: 3gpp-ts-48-008.
XRef to nonexistent id: 3gpp-ts-48-008
Error: no ID for constraint linkend: 3gpp-ts-48-058.
XRef to nonexistent id: 3gpp-ts-48-058
Error: no ID for constraint linkend: 3gpp-ts-52-021.
XRef to nonexistent id: 3gpp-ts-52-021
Error: no ID for constraint linkend: 3gpp-ts-48-018.
XRef to nonexistent id: 3gpp-ts-48-018
Error: no ID for constraint linkend: 3gpp-ts-48-049.
XRef to nonexistent id: 3gpp-ts-48-049
Error: no ID for constraint linkend: ietf-rfc2131.
XRef to nonexistent id: ietf-rfc2131
Error: no ID for constraint linkend: ietf-rfc2474.
XRef to nonexistent id: ietf-rfc2474
Error: no ID for constraint linkend: ietf-rfc791.
XRef to nonexistent id: ietf-rfc791
Error: no ID for constraint linkend: itu-t-q921.
XRef to nonexistent id: itu-t-q921
Error: no ID for constraint linkend: 3gpp-ts-44-006.
XRef to nonexistent id: 3gpp-ts-44-006
Error: no ID for constraint linkend: 3gpp-ts-44-064.
XRef to nonexistent id: 3gpp-ts-44-064
Error: no ID for constraint linkend: ietf-rfc4165.
XRef to nonexistent id: ietf-rfc4165
Error: no ID for constraint linkend: ietf-rfc3331.
XRef to nonexistent id: ietf-rfc3331
Error: no ID for constraint linkend: ietf-rfc4666.
XRef to nonexistent id: ietf-rfc4666
Error: no ID for constraint linkend: userman-osmobsc.
XRef to nonexistent id: userman-osmobsc
Error: no ID for constraint linkend: 3gpp-ts-23-236.
XRef to nonexistent id: 3gpp-ts-23-236
Error: no ID for constraint linkend: itu-t-q701.
XRef to nonexistent id: itu-t-q701
Error: no ID for constraint linkend: userman-osmobsc.
XRef to nonexistent id: userman-osmobsc
Error: no ID for constraint linkend: 3gpp-ts-23-236.
XRef to nonexistent id: 3gpp-ts-23-236
Error: no ID for constraint linkend: 3gpp-ts-48-016.
XRef to nonexistent id: 3gpp-ts-48-016
Error: no ID for constraint linkend: 3gpp-ts-52-021.
XRef to nonexistent id: 3gpp-ts-52-021
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Error: no ID for constraint linkend: 3gpp-ts-48-058.
XRef to nonexistent id: 3gpp-ts-48-058
Error: no ID for constraint linkend: ietf-rfc3550.
XRef to nonexistent id: ietf-rfc3550
Error: no ID for constraint linkend: itu-t-q711.
XRef to nonexistent id: itu-t-q711
Error: no ID for constraint linkend: ietf-rfc2719.
XRef to nonexistent id: ietf-rfc2719
Error: no ID for constraint linkend: ietf-rfc4251.
XRef to nonexistent id: ietf-rfc4251
Error: no ID for constraint linkend: ietf-rfc3868.
XRef to nonexistent id: ietf-rfc3868
Error: no ID for constraint linkend: ietf-rfc793.
XRef to nonexistent id: ietf-rfc793
Error: no ID for constraint linkend: ietf-rfc1350.
XRef to nonexistent id: ietf-rfc1350
Error: no ID for constraint linkend: ietf-rfc791.
XRef to nonexistent id: ietf-rfc791
Error: no ID for constraint linkend: ietf-rfc768.
XRef to nonexistent id: ietf-rfc768
Error: no ID for constraint linkend: etsi-tr102216.
XRef to nonexistent id: etsi-tr102216
Error: no ID for constraint linkend: 3gpp-ts-48-018.
XRef to nonexistent id: 3gpp-ts-48-018
Error: no ID for constraint linkend: ieee-802.1q.
XRef to nonexistent id: ieee-802.1q
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb__1.svg
Build osmopcu-gb.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmopcu-gb.tex
running post-compilation scripts...
[index] the index file /tmp/tmpx6g3j8sm/osmopcu-gb.idx is empty
osmopcu-gb.aux MD5 checksum changed
osmopcu-gb.toc MD5 checksum changed
the /tmp/tmpx6g3j8sm/osmopcu-gb.aux file has changed
pdflatex -interaction=batchmode osmopcu-gb.tex
running post-compilation scripts...
[index] the index file /tmp/tmpx6g3j8sm/osmopcu-gb.idx is empty
osmopcu-gb.aux MD5 checksum changed
the /tmp/tmpx6g3j8sm/osmopcu-gb.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmopcu-gb.pdf' successfully built

a2x: deleting /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-gb.xml
'osmopcu-vty-reference.pdf' successfully built
+ rm /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/generated/_temp_osmopcu-vty-reference.xml
a2x: args: ['-vv', '-L', "--asciidoc-opts=-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' ", '--dblatex-opts=--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 ', '-a', 'docinfo', '-a', 'revnumber=DRAFT 1.5.0-4-g8734', '-a', 'revdate=2024-Jul-31', 'osmopcu-usermanual.adoc']
a2x: resource files: []
a2x: resource directories: ['/etc/asciidoc/stylesheets']
a2x: executing: asciidoc ['-f', '/opt/osmo-gsm-manuals/build/mscgen-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/diag-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf', '-f', '/opt/osmo-gsm-manuals/build/graphviz-filter.conf', '-a', 'srcdir=/build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals', '-a', 'commondir=/opt/osmo-gsm-manuals/common', ('--attribute', 'docinfo'), ('--attribute', 'revnumber=DRAFT 1.5.0-4-g8734'), ('--attribute', 'revdate=2024-Jul-31'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=pdf'), ('--out-file', '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml')]
a2x: executing: "dblatex" -t pdf -p "/etc/asciidoc/dblatex/asciidoc-dblatex.xsl" -s "/etc/asciidoc/dblatex/asciidoc-dblatex.sty" --config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0  -V  "/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml"

Build the book set list...
xsltproc -o doclist.txt --xinclude --xincludestyle doclist.xsl /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml
/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml:410: element figure: validity error : ID fig-gprs-pcubts already defined
<figure id="fig-gprs-pcubts"><title>GPRS network architecture with PCU in BTS</t
                            ^
Build the listings...
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals' /usr/share/dblatex/xsl/common/mklistings.xsl /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml
/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml:410: element figure: validity error : ID fig-gprs-pcubts already defined
<figure id="fig-gprs-pcubts"><title>GPRS network architecture with PCU in BTS</t
                            ^
xsltproc -o osmopcu-usermanual.rtex --xinclude --xincludestyle --param listings.xml '/tmp/tmpvf7yzx9f/listings.xml' --param current.dir '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals' /tmp/tmpvf7yzx9f/custom.xsl /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml
/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml:410: element figure: validity error : ID fig-gprs-pcubts already defined
<figure id="fig-gprs-pcubts"><title>GPRS network architecture with PCU in BTS</t
                            ^
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Error: no ID for constraint linkend: ns:nsvc_packets:in.
XRef to nonexistent id: ns:nsvc_packets:in
Error: no ID for constraint linkend: ns:nsvc_packets:out.
XRef to nonexistent id: ns:nsvc_packets:out
Error: no ID for constraint linkend: ns:nsvc_packets:out:drop.
XRef to nonexistent id: ns:nsvc_packets:out:drop
Error: no ID for constraint linkend: ns:nsvc_bytes:in.
XRef to nonexistent id: ns:nsvc_bytes:in
Error: no ID for constraint linkend: ns:nsvc_bytes:out.
XRef to nonexistent id: ns:nsvc_bytes:out
Error: no ID for constraint linkend: ns:nsvc_bytes:out:drop.
XRef to nonexistent id: ns:nsvc_bytes:out:drop
Error: no ID for constraint linkend: ns:nsvc_blocked.
XRef to nonexistent id: ns:nsvc_blocked
Error: no ID for constraint linkend: ns:nsvc_unblocked.
XRef to nonexistent id: ns:nsvc_unblocked
Error: no ID for constraint linkend: ns:nsvc_dead.
XRef to nonexistent id: ns:nsvc_dead
Error: no ID for constraint linkend: ns:nsvc_replaced.
XRef to nonexistent id: ns:nsvc_replaced
Error: no ID for constraint linkend: ns:nsvc_nsei-chg.
XRef to nonexistent id: ns:nsvc_nsei-chg
Error: no ID for constraint linkend: ns:nsvc_inv-nsvci.
XRef to nonexistent id: ns:nsvc_inv-nsvci
Error: no ID for constraint linkend: ns:nsvc_inv-nsei.
XRef to nonexistent id: ns:nsvc_inv-nsei
Error: no ID for constraint linkend: ns:nsvc_lost:alive.
XRef to nonexistent id: ns:nsvc_lost:alive
Error: no ID for constraint linkend: ns:nsvc_lost:reset.
XRef to nonexistent id: ns:nsvc_lost:reset
Error: no ID for constraint linkend: ns:nse_packets:in.
XRef to nonexistent id: ns:nse_packets:in
Error: no ID for constraint linkend: ns:nse_packets:out.
XRef to nonexistent id: ns:nse_packets:out
Error: no ID for constraint linkend: ns:nse_packets:out:drop.
XRef to nonexistent id: ns:nse_packets:out:drop
Error: no ID for constraint linkend: ns:nse_bytes:in.
XRef to nonexistent id: ns:nse_bytes:in
Error: no ID for constraint linkend: ns:nse_bytes:out.
XRef to nonexistent id: ns:nse_bytes:out
Error: no ID for constraint linkend: ns:nse_bytes:out:drop.
XRef to nonexistent id: ns:nse_bytes:out:drop
Error: no ID for constraint linkend: ns:nse_blocked.
XRef to nonexistent id: ns:nse_blocked
Error: no ID for constraint linkend: ns:nse_unblocked.
XRef to nonexistent id: ns:nse_unblocked
Error: no ID for constraint linkend: ns:nse_dead.
XRef to nonexistent id: ns:nse_dead
Error: no ID for constraint linkend: ns:nse_replaced.
XRef to nonexistent id: ns:nse_replaced
Error: no ID for constraint linkend: ns:nse_nsei-chg.
XRef to nonexistent id: ns:nse_nsei-chg
Error: no ID for constraint linkend: ns:nse_inv-nsvci.
XRef to nonexistent id: ns:nse_inv-nsvci
Error: no ID for constraint linkend: ns:nse_inv-nsei.
XRef to nonexistent id: ns:nse_inv-nsei
Error: no ID for constraint linkend: ns:nse_lost:alive.
XRef to nonexistent id: ns:nse_lost:alive
Error: no ID for constraint linkend: ns:nse_lost:reset.
XRef to nonexistent id: ns:nse_lost:reset
Error: no ID for constraint linkend: pcu:sgsn_rx_paging_cs.
XRef to nonexistent id: pcu:sgsn_rx_paging_cs
Error: no ID for constraint linkend: pcu:sgsn_rx_paging_ps.
XRef to nonexistent id: pcu:sgsn_rx_paging_ps
Error: no ID for constraint linkend: bssgp:bss_ctx_packets:in.
XRef to nonexistent id: bssgp:bss_ctx_packets:in
Error: no ID for constraint linkend: bssgp:bss_ctx_packets:out.
XRef to nonexistent id: bssgp:bss_ctx_packets:out
Error: no ID for constraint linkend: bssgp:bss_ctx_bytes:in.
XRef to nonexistent id: bssgp:bss_ctx_bytes:in
Error: no ID for constraint linkend: bssgp:bss_ctx_bytes:out.
XRef to nonexistent id: bssgp:bss_ctx_bytes:out
Error: no ID for constraint linkend: bssgp:bss_ctx_blocked.
XRef to nonexistent id: bssgp:bss_ctx_blocked
Error: no ID for constraint linkend: bssgp:bss_ctx_discarded.
XRef to nonexistent id: bssgp:bss_ctx_discarded
Error: no ID for constraint linkend: bssgp:bss_ctx_status.
XRef to nonexistent id: bssgp:bss_ctx_status
Error: no ID for constraint linkend: bts_tbf:dl:alloc.
XRef to nonexistent id: bts_tbf:dl:alloc
Error: no ID for constraint linkend: bts_tbf:dl:freed.
XRef to nonexistent id: bts_tbf:dl:freed
Error: no ID for constraint linkend: bts_tbf:dl:aborted.
XRef to nonexistent id: bts_tbf:dl:aborted
Error: no ID for constraint linkend: bts_tbf:ul:alloc.
XRef to nonexistent id: bts_tbf:ul:alloc
Error: no ID for constraint linkend: bts_tbf:ul:freed.
XRef to nonexistent id: bts_tbf:ul:freed
Error: no ID for constraint linkend: bts_tbf:ul:aborted.
XRef to nonexistent id: bts_tbf:ul:aborted
Error: no ID for constraint linkend: bts_tbf:reused.
XRef to nonexistent id: bts_tbf:reused
Error: no ID for constraint linkend: bts_tbf:alloc:algo-a.
XRef to nonexistent id: bts_tbf:alloc:algo-a
Error: no ID for constraint linkend: bts_tbf:alloc:algo-b.
XRef to nonexistent id: bts_tbf:alloc:algo-b
Error: no ID for constraint linkend: bts_tbf:alloc:failed.
XRef to nonexistent id: bts_tbf:alloc:failed
Error: no ID for constraint linkend: bts_tbf:alloc:failed:no_tfi.
XRef to nonexistent id: bts_tbf:alloc:failed:no_tfi
Error: no ID for constraint linkend: bts_tbf:alloc:failed:no_usf.
XRef to nonexistent id: bts_tbf:alloc:failed:no_usf
Error: no ID for constraint linkend: bts_tbf:alloc:failed:no_slot_combi.
XRef to nonexistent id: bts_tbf:alloc:failed:no_slot_combi
Error: no ID for constraint linkend: bts_tbf:alloc:failed:no_slot_avail.
XRef to nonexistent id: bts_tbf:alloc:failed:no_slot_avail
Error: no ID for constraint linkend: bts_rlc:sent.
XRef to nonexistent id: bts_rlc:sent
Error: no ID for constraint linkend: bts_rlc:resent.
XRef to nonexistent id: bts_rlc:resent
Error: no ID for constraint linkend: bts_rlc:restarted.
XRef to nonexistent id: bts_rlc:restarted
Error: no ID for constraint linkend: bts_rlc:stalled.
XRef to nonexistent id: bts_rlc:stalled
Error: no ID for constraint linkend: bts_rlc:nacked.
XRef to nonexistent id: bts_rlc:nacked
Error: no ID for constraint linkend: bts_rlc:final_block_resent.
XRef to nonexistent id: bts_rlc:final_block_resent
Error: no ID for constraint linkend: bts_rlc:ass:timedout.
XRef to nonexistent id: bts_rlc:ass:timedout
Error: no ID for constraint linkend: bts_rlc:ass:failed.
XRef to nonexistent id: bts_rlc:ass:failed
Error: no ID for constraint linkend: bts_rlc:ack:timedout.
XRef to nonexistent id: bts_rlc:ack:timedout
Error: no ID for constraint linkend: bts_rlc:ack:failed.
XRef to nonexistent id: bts_rlc:ack:failed
Error: no ID for constraint linkend: bts_rlc:rel:timedout.
XRef to nonexistent id: bts_rlc:rel:timedout
Error: no ID for constraint linkend: bts_rlc:late-block.
XRef to nonexistent id: bts_rlc:late-block
Error: no ID for constraint linkend: bts_rlc:sent-dummy.
XRef to nonexistent id: bts_rlc:sent-dummy
Error: no ID for constraint linkend: bts_rlc:sent-control.
XRef to nonexistent id: bts_rlc:sent-control
Error: no ID for constraint linkend: bts_rlc:dl_bytes.
XRef to nonexistent id: bts_rlc:dl_bytes
Error: no ID for constraint linkend: bts_rlc:dl_payload_bytes.
XRef to nonexistent id: bts_rlc:dl_payload_bytes
Error: no ID for constraint linkend: bts_rlc:ul_bytes.
XRef to nonexistent id: bts_rlc:ul_bytes
Error: no ID for constraint linkend: bts_rlc:ul_payload_bytes.
XRef to nonexistent id: bts_rlc:ul_payload_bytes
Error: no ID for constraint linkend: bts_decode:errors.
XRef to nonexistent id: bts_decode:errors
Error: no ID for constraint linkend: bts_sba:allocated.
XRef to nonexistent id: bts_sba:allocated
Error: no ID for constraint linkend: bts_sba:freed.
XRef to nonexistent id: bts_sba:freed
Error: no ID for constraint linkend: bts_sba:timedout.
XRef to nonexistent id: bts_sba:timedout
Error: no ID for constraint linkend: bts_llc:timeout.
XRef to nonexistent id: bts_llc:timeout
Error: no ID for constraint linkend: bts_llc:dropped.
XRef to nonexistent id: bts_llc:dropped
Error: no ID for constraint linkend: bts_llc:scheduled.
XRef to nonexistent id: bts_llc:scheduled
Error: no ID for constraint linkend: bts_llc:dl_bytes.
XRef to nonexistent id: bts_llc:dl_bytes
Error: no ID for constraint linkend: bts_llc:ul_bytes.
XRef to nonexistent id: bts_llc:ul_bytes
Error: no ID for constraint linkend: bts_pch:requests.
XRef to nonexistent id: bts_pch:requests
Error: no ID for constraint linkend: bts_pch:requests:timeout.
XRef to nonexistent id: bts_pch:requests:timeout
Error: no ID for constraint linkend: bts_rach:requests.
XRef to nonexistent id: bts_rach:requests
Error: no ID for constraint linkend: bts_rach:requests:11bit.
XRef to nonexistent id: bts_rach:requests:11bit
Error: no ID for constraint linkend: bts_rach:requests:one_phase.
XRef to nonexistent id: bts_rach:requests:one_phase
Error: no ID for constraint linkend: bts_rach:requests:two_phase.
XRef to nonexistent id: bts_rach:requests:two_phase
Error: no ID for constraint linkend: bts_rach:requests:unexpected.
XRef to nonexistent id: bts_rach:requests:unexpected
Error: no ID for constraint linkend: bts_spb:uplink_first_segment.
XRef to nonexistent id: bts_spb:uplink_first_segment
Error: no ID for constraint linkend: bts_spb:uplink_second_segment.
XRef to nonexistent id: bts_spb:uplink_second_segment
Error: no ID for constraint linkend: bts_spb:downlink_first_segment.
XRef to nonexistent id: bts_spb:downlink_first_segment
Error: no ID for constraint linkend: bts_spb:downlink_second_segment.
XRef to nonexistent id: bts_spb:downlink_second_segment
Error: no ID for constraint linkend: bts_immediate:assignment_UL.
XRef to nonexistent id: bts_immediate:assignment_UL
Error: no ID for constraint linkend: bts_immediate:assignment_ul:one_phase.
XRef to nonexistent id: bts_immediate:assignment_ul:one_phase
Error: no ID for constraint linkend: bts_immediate:assignment_ul:two_phase.
XRef to nonexistent id: bts_immediate:assignment_ul:two_phase
Error: no ID for constraint linkend: bts_immediate:assignment_ul:contention_resolution_success.
XRef to nonexistent id: bts_immediate:assignment_ul:contention_resolution_success
Error: no ID for constraint linkend: bts_immediate:assignment_rej.
XRef to nonexistent id: bts_immediate:assignment_rej
Error: no ID for constraint linkend: bts_immediate:assignment_DL.
XRef to nonexistent id: bts_immediate:assignment_DL
Error: no ID for constraint linkend: bts_channel:request_description.
XRef to nonexistent id: bts_channel:request_description
Error: no ID for constraint linkend: bts_pkt:ul_assignment.
XRef to nonexistent id: bts_pkt:ul_assignment
Error: no ID for constraint linkend: bts_pkt:access_reject.
XRef to nonexistent id: bts_pkt:access_reject
Error: no ID for constraint linkend: bts_pkt:dl_assignment.
XRef to nonexistent id: bts_pkt:dl_assignment
Error: no ID for constraint linkend: bts_pkt:cell_chg_notification.
XRef to nonexistent id: bts_pkt:cell_chg_notification
Error: no ID for constraint linkend: bts_pkt:cell_chg_continue.
XRef to nonexistent id: bts_pkt:cell_chg_continue
Error: no ID for constraint linkend: bts_pkt:neigh_cell_data.
XRef to nonexistent id: bts_pkt:neigh_cell_data
Error: no ID for constraint linkend: bts_ul:control.
XRef to nonexistent id: bts_ul:control
Error: no ID for constraint linkend: bts_ul:assignment_poll_timeout.
XRef to nonexistent id: bts_ul:assignment_poll_timeout
Error: no ID for constraint linkend: bts_ul:assignment_failed.
XRef to nonexistent id: bts_ul:assignment_failed
Error: no ID for constraint linkend: bts_dl:assignment_timeout.
XRef to nonexistent id: bts_dl:assignment_timeout
Error: no ID for constraint linkend: bts_dl:assignment_failed.
XRef to nonexistent id: bts_dl:assignment_failed
Error: no ID for constraint linkend: bts_pkt:ul_ack_nack_timeout.
XRef to nonexistent id: bts_pkt:ul_ack_nack_timeout
Error: no ID for constraint linkend: bts_pkt:ul_ack_nack_failed.
XRef to nonexistent id: bts_pkt:ul_ack_nack_failed
Error: no ID for constraint linkend: bts_pkt:dl_ack_nack_timeout.
XRef to nonexistent id: bts_pkt:dl_ack_nack_timeout
Error: no ID for constraint linkend: bts_pkt:dl_ack_nack_failed.
XRef to nonexistent id: bts_pkt:dl_ack_nack_failed
Error: no ID for constraint linkend: bts_gprs:downlink_cs1.
XRef to nonexistent id: bts_gprs:downlink_cs1
Error: no ID for constraint linkend: bts_gprs:downlink_cs2.
XRef to nonexistent id: bts_gprs:downlink_cs2
Error: no ID for constraint linkend: bts_gprs:downlink_cs3.
XRef to nonexistent id: bts_gprs:downlink_cs3
Error: no ID for constraint linkend: bts_gprs:downlink_cs4.
XRef to nonexistent id: bts_gprs:downlink_cs4
Error: no ID for constraint linkend: bts_egprs:downlink_mcs1.
XRef to nonexistent id: bts_egprs:downlink_mcs1
Error: no ID for constraint linkend: bts_egprs:downlink_mcs2.
XRef to nonexistent id: bts_egprs:downlink_mcs2
Error: no ID for constraint linkend: bts_egprs:downlink_mcs3.
XRef to nonexistent id: bts_egprs:downlink_mcs3
Error: no ID for constraint linkend: bts_egprs:downlink_mcs4.
XRef to nonexistent id: bts_egprs:downlink_mcs4
Error: no ID for constraint linkend: bts_egprs:downlink_mcs5.
XRef to nonexistent id: bts_egprs:downlink_mcs5
Error: no ID for constraint linkend: bts_egprs:downlink_mcs6.
XRef to nonexistent id: bts_egprs:downlink_mcs6
Error: no ID for constraint linkend: bts_egprs:downlink_mcs7.
XRef to nonexistent id: bts_egprs:downlink_mcs7
Error: no ID for constraint linkend: bts_egprs:downlink_mcs8.
XRef to nonexistent id: bts_egprs:downlink_mcs8
Error: no ID for constraint linkend: bts_egprs:downlink_mcs9.
XRef to nonexistent id: bts_egprs:downlink_mcs9
Error: no ID for constraint linkend: bts_gprs:uplink_cs1.
XRef to nonexistent id: bts_gprs:uplink_cs1
Error: no ID for constraint linkend: bts_gprs:uplink_cs2.
XRef to nonexistent id: bts_gprs:uplink_cs2
Error: no ID for constraint linkend: bts_gprs:uplink_cs3.
XRef to nonexistent id: bts_gprs:uplink_cs3
Error: no ID for constraint linkend: bts_gprs:uplink_cs4.
XRef to nonexistent id: bts_gprs:uplink_cs4
Error: no ID for constraint linkend: bts_egprs:uplink_mcs1.
XRef to nonexistent id: bts_egprs:uplink_mcs1
Error: no ID for constraint linkend: bts_egprs:uplink_mcs2.
XRef to nonexistent id: bts_egprs:uplink_mcs2
Error: no ID for constraint linkend: bts_egprs:uplink_mcs3.
XRef to nonexistent id: bts_egprs:uplink_mcs3
Error: no ID for constraint linkend: bts_egprs:uplink_mcs4.
XRef to nonexistent id: bts_egprs:uplink_mcs4
Error: no ID for constraint linkend: bts_egprs:uplink_mcs5.
XRef to nonexistent id: bts_egprs:uplink_mcs5
Error: no ID for constraint linkend: bts_egprs:uplink_mcs6.
XRef to nonexistent id: bts_egprs:uplink_mcs6
Error: no ID for constraint linkend: bts_egprs:uplink_mcs7.
XRef to nonexistent id: bts_egprs:uplink_mcs7
Error: no ID for constraint linkend: bts_egprs:uplink_mcs8.
XRef to nonexistent id: bts_egprs:uplink_mcs8
Error: no ID for constraint linkend: bts_egprs:uplink_mcs9.
XRef to nonexistent id: bts_egprs:uplink_mcs9
Error: no ID for constraint linkend: ns.nsvc_alive.delay.
XRef to nonexistent id: ns.nsvc_alive.delay
Error: no ID for constraint linkend: ns.bind_tx_backlog_length.
XRef to nonexistent id: ns.bind_tx_backlog_length
Error: no ID for constraint linkend: bts_ms.present.
XRef to nonexistent id: bts_ms.present
Error: no ID for constraint linkend: bts_pdch.available.
XRef to nonexistent id: bts_pdch.available
Error: no ID for constraint linkend: bts_pdch.occupied.
XRef to nonexistent id: bts_pdch.occupied
Error: no ID for constraint linkend: bts_pdch.occupied.gprs.
XRef to nonexistent id: bts_pdch.occupied.gprs
Error: no ID for constraint linkend: bts_pdch.occupied.egprs.
XRef to nonexistent id: bts_pdch.occupied.egprs
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual__1.svg
rsvg-convert -a -f pdf -o fig1.pdf /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual__2.svg
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
rsvg-convert -a -f pdf -o fig2.pdf /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual__3.svg
Build osmopcu-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmopcu-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpvf7yzx9f/osmopcu-usermanual.idx is empty
osmopcu-usermanual.aux MD5 checksum changed
osmopcu-usermanual.toc MD5 checksum changed
the /tmp/tmpvf7yzx9f/osmopcu-usermanual.aux file has changed
pdflatex -interaction=batchmode osmopcu-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpvf7yzx9f/osmopcu-usermanual.idx is empty
osmopcu-usermanual.aux MD5 checksum changed
the /tmp/tmpvf7yzx9f/osmopcu-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmopcu-usermanual.pdf' successfully built

a2x: deleting /build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals/osmopcu-usermanual.xml
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making all in tests
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
  CXX      pcu_emu.o
  CXX      test_replay_gprs_attach.o
  CC       openbsc_clone.o
  CXX      test_pdp_activation.o
  CXXLD    emu/pcu_emu
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making all in contrib
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making dvi in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making dvi in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make  check-recursive
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making check in doc
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
	make osmopcu-usermanual.check osmopcu-gb.check; \
fi
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
if ! [ -f osmopcu-usermanual.adoc ]; then \
	ln -s osmopcu-usermanual.adoc osmopcu-usermanual.adoc; \
fi
if ! [ -f osmopcu-gb.adoc ]; then \
	ln -s osmopcu-gb.adoc osmopcu-gb.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common'  osmopcu-usermanual.adoc > osmopcu-usermanual.check 2>&1
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-pcu-1.5.0.4-8734/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common'  osmopcu-gb.adoc > osmopcu-gb.check 2>&1
touch osmopcu-gb.check
touch osmopcu-usermanual.check
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making check in tests
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make  rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
  CXX      RLCMACTest.o
  CXX      AllocTest.o
  CXX      MslotTest.o
  CXX      TbfTest.o
  CXX      TypesTest.o
  CXX      MsTest.o
  CXX      LListTest.o
  CXX      LlcTest.o
  CC       codel_test.o
  CXX      EdgeTest.o
  CXX      BitcompTest.o
  CXX      egprs_rlc_compression.o
  CXX      FnTest.o
  CXX      AppInfoTest.o
  CXX      PdchUlcTest.o
  CXXLD    alloc/AllocTest
  CXXLD    rlcmac/RLCMACTest
  CXXLD    tbf/TbfTest
  CXXLD    ms/MsTest
  CXXLD    alloc/MslotTest
  CXXLD    types/TypesTest
  CXXLD    llc/LlcTest
  CXXLD    llist/LListTest
  CCLD     codel/codel_test
  CXXLD    edge/EdgeTest
  CXXLD    bitcomp/BitcompTest
  CXXLD    fn/FnTest
  CXXLD    app_info/AppInfoTest
  CXXLD    ulc/PdchUlcTest
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make  check-local
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
/bin/bash '../../../tests/testsuite' 
## --------------------------------- ##
## osmo-pcu 1.5.0.4-8734 test suite. ##
## --------------------------------- ##

Regression tests

  1: rlcmac                                          ok
  2: multi_slot                                      ok
  3: ts_alloc                                        ok
  4: tbf                                             ok
  5: bitcomp                                         ok
  6: edge                                            ok
  7: types                                           ok
  8: ms                                              ok
  9: llc                                             ok
 10: llist                                           ok
 11: codel                                           ok
 12: fn                                              ok
 13: app_info                                        ok
 14: ulc                                             ok

## ------------- ##
## Test results. ##
## ------------- ##

All 14 tests were successful.
make  python-tests
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Not running python-based tests (determined at configure-time)
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making check in contrib
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make  install-recursive
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
 /usr/bin/mkdir -p '/build/osmo-pcu-1.5.0.4-8734/_inst/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c osmo-pcu '/build/osmo-pcu-1.5.0.4-8734/_inst/bin'
libtool: install: /usr/bin/install -c osmo-pcu /build/osmo-pcu-1.5.0.4-8734/_inst/bin/osmo-pcu
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu/examples/osmo-pcu'
 /usr/bin/mkdir -p '/build/osmo-pcu-1.5.0.4-8734/_inst/etc/osmocom'
 /usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu/examples/osmo-pcu'
 /usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/build/osmo-pcu-1.5.0.4-8734/_inst/etc/osmocom'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
[ -n "osmo-pcu" ] || exit 1
if [ "" != "1" ]; then \
	for i in osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf; do \
		install -vDm644 "$i" "/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/$i" || exit 1; \
	done; \
fi
install: creating directory '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc'
'osmopcu-usermanual.pdf' -> '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-usermanual.pdf'
'osmopcu-gb.pdf' -> '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-gb.pdf'
'osmopcu-vty-reference.pdf' -> '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making install in tests
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making install in contrib
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/build/osmo-pcu-1.5.0.4-8734/_inst//lib/systemd/system'
 /usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-pcu.service '/build/osmo-pcu-1.5.0.4-8734/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-pcu-1.5.0.4-8734/_inst/bin' \
	
## --------------------------------- ##
## osmo-pcu 1.5.0.4-8734 test suite. ##
## --------------------------------- ##

Regression tests

  1: rlcmac                                          ok
  2: multi_slot                                      ok
  3: ts_alloc                                        ok
  4: tbf                                             ok
  5: bitcomp                                         ok
  6: edge                                            ok
  7: types                                           ok
  8: ms                                              ok
  9: llc                                             ok
 10: llist                                           ok
 11: codel                                           ok
 12: fn                                              ok
 13: app_info                                        ok
 14: ulc                                             ok

## ------------- ##
## Test results. ##
## ------------- ##

All 14 tests were successful.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
 ( cd '/build/osmo-pcu-1.5.0.4-8734/_inst/bin' && rm -f osmo-pcu )
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
 ( cd '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu/examples/osmo-pcu' && rm -f osmo-pcu.cfg )
 ( cd '/build/osmo-pcu-1.5.0.4-8734/_inst/etc/osmocom' && rm -f osmo-pcu.cfg )
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
[ -n "osmo-pcu" ] || exit 1
if [ "" != "1" ]; then \
	for i in osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf; do \
		rm -v "/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/$i"; \
	done; \
fi
removed '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-usermanual.pdf'
removed '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-gb.pdf'
removed '/build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
 ( cd '/build/osmo-pcu-1.5.0.4-8734/_inst//lib/systemd/system' && rm -f osmo-pcu.service )
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make  install-recursive
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
 /usr/bin/mkdir -p '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/bin'
  /bin/bash ../libtool   --mode=install /usr/bin/install -c osmo-pcu '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/bin'
libtool: install: /usr/bin/install -c osmo-pcu /tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/bin/osmo-pcu
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu/examples/osmo-pcu'
 /usr/bin/mkdir -p '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/etc/osmocom'
 /usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu/examples/osmo-pcu'
 /usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/etc/osmocom'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
[ -n "osmo-pcu" ] || exit 1
if [ "" != "1" ]; then \
	for i in osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf; do \
		install -vDm644 "$i" "/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/$i" || exit 1; \
	done; \
fi
install: creating directory '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc'
'osmopcu-usermanual.pdf' -> '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-usermanual.pdf'
'osmopcu-gb.pdf' -> '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-gb.pdf'
'osmopcu-vty-reference.pdf' -> '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-vty-reference.pdf'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making install in tests
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making install in contrib
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst//lib/systemd/system'
 /usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-pcu.service '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
 ( cd '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/bin' && rm -f osmo-pcu )
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
 ( cd '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu/examples/osmo-pcu' && rm -f osmo-pcu.cfg )
 ( cd '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/etc/osmocom' && rm -f osmo-pcu.cfg )
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
[ -n "osmo-pcu" ] || exit 1
if [ "" != "1" ]; then \
	for i in osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf; do \
		rm -v "/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/$i"; \
	done; \
fi
removed '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-usermanual.pdf'
removed '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-gb.pdf'
removed '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst/share/doc/osmo-pcu-doc/osmopcu-vty-reference.pdf'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
 ( cd '/tmp/am-dc-31931//build/osmo-pcu-1.5.0.4-8734/_inst//lib/systemd/system' && rm -f osmo-pcu.service )
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make  dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make  distdir-am
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
if test -d "osmo-pcu-1.5.0.4-8734"; then find "osmo-pcu-1.5.0.4-8734" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.4-8734" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.4-8734"; }; else :; fi
test -d "osmo-pcu-1.5.0.4-8734" || mkdir "osmo-pcu-1.5.0.4-8734"
 (cd include && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/include \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make  distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
 (cd src && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/src \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make  distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
 (cd doc && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/doc \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make  distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
 (cd examples && make  top_distdir=../../osmo-pcu-1.5.0.4-8734 distdir=../../osmo-pcu-1.5.0.4-8734/doc/examples \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make  distdir-am
make[7]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
 (cd manuals && make  top_distdir=../../osmo-pcu-1.5.0.4-8734 distdir=../../osmo-pcu-1.5.0.4-8734/doc/manuals \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make  distdir-am
make[7]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
 (cd tests && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/tests \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make  distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
 (cd contrib && make  top_distdir=../osmo-pcu-1.5.0.4-8734 distdir=../osmo-pcu-1.5.0.4-8734/contrib \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make  distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
 (cd systemd && make  top_distdir=../../osmo-pcu-1.5.0.4-8734 distdir=../../osmo-pcu-1.5.0.4-8734/contrib/systemd \
     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make  distdir-am
make[7]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make  \
  top_distdir="osmo-pcu-1.5.0.4-8734" distdir="osmo-pcu-1.5.0.4-8734" \
  dist-hook
make[4]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
echo 1.5.0.4-8734 > osmo-pcu-1.5.0.4-8734/.tarball-version
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
test -n "" \
|| find "osmo-pcu-1.5.0.4-8734" -type d ! -perm -755 \
	-exec chmod u+rwx,go+rx {} \; -o \
  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
  ! -type d ! -perm -444 -exec /bin/bash /build/osmo-pcu-1.5.0.4-8734/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-pcu-1.5.0.4-8734"
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
tardir=osmo-pcu-1.5.0.4-8734 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-pcu-1.5.0.4-8734.tar.bz2
tardir=osmo-pcu-1.5.0.4-8734 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-pcu-1.5.0.4-8734.tar.gz
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
if test -d "osmo-pcu-1.5.0.4-8734"; then find "osmo-pcu-1.5.0.4-8734" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.4-8734" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.4-8734"; }; else :; fi
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || test -z "" || rm -f 
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
rm -rf .libs _libs
test -z "libgprs.la" || rm -f libgprs.la
 rm -f osmo-pcu
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../src" || test -z "" || rm -f 
rm -f ./so_locations
rm -f ericsson-rbs/.deps/.dirstamp
rm -f ericsson-rbs/*.o
rm -f ericsson-rbs/.dirstamp
rm -f osmo-bts-litecell15/*.o
rm -f osmo-bts-litecell15/.deps/.dirstamp
rm -f osmo-bts-oc2g/*.o
rm -f osmo-bts-litecell15/.dirstamp
rm -f osmo-bts-sysmo/*.o
rm -f osmo-bts-oc2g/.deps/.dirstamp
rm -f osmo-bts-oc2g/.dirstamp
rm -f osmo-bts-sysmo/.deps/.dirstamp
rm -f osmo-bts-sysmo/.dirstamp
rm -f ./.deps/alloc_algo.Plo
rm -f ./.deps/bts.Plo
rm -f ./.deps/bts_pch_timer.Plo
rm -f ./.deps/coding_scheme.Plo
rm -f ./.deps/csn1.Plo
rm -f ./.deps/csn1_dec.Plo
rm -f ./.deps/csn1_enc.Plo
rm -f ./.deps/decoding.Plo
rm -f ./.deps/egprs_rlc_compression.Plo
rm -f ./.deps/encoding.Plo
rm -f ./.deps/gprs_bssgp_pcu.Plo
rm -f ./.deps/gprs_bssgp_rim.Plo
rm -f ./.deps/gprs_codel.Plo
rm -f ./.deps/gprs_debug.Plo
rm -f ./.deps/gprs_ms.Plo
rm -f ./.deps/gprs_pcu.Plo
rm -f ./.deps/gprs_rlcmac.Plo
rm -f ./.deps/gprs_rlcmac_meas.Plo
rm -f ./.deps/gprs_rlcmac_sched.Plo
rm -f ./.deps/gsm_rlcmac.Plo
rm -f ./.deps/llc.Plo
rm -f ./.deps/mslot_class.Plo
rm -f ./.deps/nacc_fsm.Plo
rm -f ./.deps/neigh_cache.Plo
rm -f ./.deps/pcu_l1_if.Plo
rm -f ./.deps/pcu_main.Po
rm -f ./.deps/pcu_vty.Plo
rm -f ./.deps/pcu_vty_functions.Plo
rm -f ./.deps/pcuif_sock.Plo
rm -f ./.deps/pdch.Plo
rm -f ./.deps/pdch_ul_controller.Plo
rm -f ./.deps/rlc.Plo
rm -f ./.deps/rlc_window.Plo
rm -f ./.deps/rlc_window_dl.Plo
rm -f ./.deps/rlc_window_ul.Plo
rm -f ./.deps/sba.Plo
rm -f ./.deps/tbf.Plo
rm -f ./.deps/tbf_dl.Plo
rm -f ./.deps/tbf_dl_ass_fsm.Plo
rm -f ./.deps/tbf_dl_fsm.Plo
rm -f ./.deps/tbf_fsm.Plo
rm -f ./.deps/tbf_ul.Plo
rm -f ./.deps/tbf_ul_ack_fsm.Plo
rm -f ./.deps/tbf_ul_ass_fsm.Plo
rm -f ./.deps/tbf_ul_fsm.Plo
rm -f ericsson-rbs/.deps/er_ccu_if.Po
rm -f ericsson-rbs/.deps/er_ccu_l1_if.Po
rm -f osmo-bts-litecell15/.deps/lc15_l1_hw.Po
rm -f osmo-bts-litecell15/.deps/lc15_l1_if.Po
rm -f osmo-bts-litecell15/.deps/lc15bts.Po
rm -f osmo-bts-oc2g/.deps/oc2g_l1_hw.Po
rm -f osmo-bts-oc2g/.deps/oc2g_l1_if.Po
rm -f osmo-bts-oc2g/.deps/oc2gbts.Po
rm -f osmo-bts-sysmo/.deps/femtobts.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_fwd.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_hw.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_if.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/src'
Making distclean in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
test . = "../../../../doc/examples" || test -z "" || rm -f 
rm -f Makefile
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
test . = "../../../../doc/manuals" || test -z "" || rm -f 
rm -rf osmopcu-usermanual__*.png osmopcu-gb__*.png osmopcu-usermanual__*.svg osmopcu-gb__*.svg osmopcu-usermanual.check osmopcu-gb.check osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-usermanual.html osmopcu-gb.html osmopcu-vty-reference.pdf osmopcu-vty-reference.lint generated ./vty/pcu_vty_reference.xml common build generated/.pdf_shrink_marker
rm -f Makefile
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || test -z "" || rm -f 
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/doc'
Making distclean in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
	/bin/bash '../../../tests/testsuite' --clean
rm -f *.o
 rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest
rm -f *.lo
rm -f *.tab.c
 rm -f emu/pcu_emu
test -z "" || rm -f 
rm -rf alloc/.libs alloc/_libs
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../tests" || test -z "" || rm -f 
rm -f alloc/.dirstamp
rm -rf app_info/.libs app_info/_libs
rm -f app_info/.dirstamp
rm -rf bitcomp/.libs bitcomp/_libs
rm -f bitcomp/.dirstamp
rm -rf codel/.libs codel/_libs
rm -f codel/.dirstamp
rm -rf edge/.libs edge/_libs
rm -f edge/.dirstamp
rm -rf emu/.libs emu/_libs
rm -f emu/.dirstamp
rm -rf fn/.libs fn/_libs
rm -f fn/.dirstamp
rm -rf llc/.libs llc/_libs
rm -f llc/.dirstamp
rm -rf llist/.libs llist/_libs
rm -f llist/.dirstamp
rm -rf ms/.libs ms/_libs
rm -f ms/.dirstamp
rm -rf rlcmac/.libs rlcmac/_libs
rm -f rlcmac/.dirstamp
rm -rf tbf/.libs tbf/_libs
rm -f tbf/.dirstamp
rm -rf types/.libs types/_libs
rm -f types/.dirstamp
rm -rf ulc/.libs ulc/_libs
rm -f ulc/.dirstamp
test -z "atconfig" || rm -f atconfig
rm -f ./.deps/AllocTest.Po
rm -f ./.deps/AppInfoTest.Po
rm -f ./.deps/BitcompTest.Po
rm -f ./.deps/EdgeTest.Po
rm -f ./.deps/FnTest.Po
rm -f ./.deps/LListTest.Po
rm -f ./.deps/LlcTest.Po
rm -f ./.deps/MsTest.Po
rm -f ./.deps/MslotTest.Po
rm -f ./.deps/PdchUlcTest.Po
rm -f ./.deps/RLCMACTest.Po
rm -f ./.deps/TbfTest.Po
rm -f ./.deps/TypesTest.Po
rm -f ./.deps/codel_test.Po
rm -f ./.deps/egprs_rlc_compression.Po
rm -f ./.deps/openbsc_clone.Po
rm -f ./.deps/pcu_emu.Po
rm -f ./.deps/test_pdp_activation.Po
rm -f ./.deps/test_replay_gprs_attach.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
test . = "../../../../contrib/systemd" || test -z "" || rm -f 
rm -f Makefile
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || test -z "" || rm -f 
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../.." || test -z "" || rm -f 
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub'
if test -d "osmo-pcu-1.5.0.4-8734"; then find "osmo-pcu-1.5.0.4-8734" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.4-8734" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.4-8734"; }; else :; fi
=======================================================
osmo-pcu-1.5.0.4-8734 archives ready for distribution: 
osmo-pcu-1.5.0.4-8734.tar.gz
osmo-pcu-1.5.0.4-8734.tar.bz2
=======================================================
+ [ 1 = 1 ]
+ [ 1 = 1 ]
+ make -C /build/doc/manuals publish
make: Entering directory '/build/doc/manuals'
/opt/osmo-gsm-manuals/build/shrink-pdfs.sh osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf
* osmopcu-usermanual.pdf: 552K
* osmopcu-gb.pdf: 228K
* osmopcu-vty-reference.pdf: 272K
[ -n "osmo-pcu" ] || exit 1
rm -rf "_publish_tmpdir"
mkdir -p "_publish_tmpdir/osmo-pcu/master"
cp osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf "_publish_tmpdir/osmo-pcu/master"
cd "_publish_tmpdir" && \
	rsync \
		-avzR \
		-e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" \
		"osmo-pcu" \
		docs@ftp.osmocom.org:web-files/
sending incremental file list
osmo-pcu/
osmo-pcu/master/
osmo-pcu/master/osmopcu-gb.pdf
osmo-pcu/master/osmopcu-usermanual.pdf
osmo-pcu/master/osmopcu-vty-reference.pdf

sent 13,214 bytes  received 8,971 bytes  14,790.00 bytes/sec
total size is 1,069,022  speedup is 48.19
rm -rf "_publish_tmpdir"
make: Leaving directory '/build/doc/manuals'
+ make -j 12 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f 
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
rm -rf .libs _libs
test -z "libgprs.la" || rm -f libgprs.la
 rm -f osmo-pcu
rm -f *.o
rm -f *.lo
rm -f *.tab.c
test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f 
rm -f ericsson-rbs/.deps/.dirstamp
it deletes files that may require special tools to rebuild.
rm -f ericsson-rbs/*.o
rm -f ./so_locations
rm -f ericsson-rbs/.dirstamp
rm -f osmo-bts-litecell15/*.o
rm -f osmo-bts-litecell15/.deps/.dirstamp
rm -f osmo-bts-oc2g/*.o
rm -f osmo-bts-litecell15/.dirstamp
rm -f osmo-bts-sysmo/*.o
rm -f osmo-bts-oc2g/.deps/.dirstamp
rm -f osmo-bts-oc2g/.dirstamp
rm -f osmo-bts-sysmo/.deps/.dirstamp
rm -f osmo-bts-sysmo/.dirstamp
rm -f ./.deps/alloc_algo.Plo
rm -f ./.deps/bts.Plo
rm -f ./.deps/bts_pch_timer.Plo
rm -f ./.deps/coding_scheme.Plo
rm -f ./.deps/csn1.Plo
rm -f ./.deps/csn1_dec.Plo
rm -f ./.deps/csn1_enc.Plo
rm -f ./.deps/decoding.Plo
rm -f ./.deps/egprs_rlc_compression.Plo
rm -f ./.deps/encoding.Plo
rm -f ./.deps/gprs_bssgp_pcu.Plo
rm -f ./.deps/gprs_bssgp_rim.Plo
rm -f ./.deps/gprs_codel.Plo
rm -f ./.deps/gprs_debug.Plo
rm -f ./.deps/gprs_ms.Plo
rm -f ./.deps/gprs_pcu.Plo
rm -f ./.deps/gprs_rlcmac.Plo
rm -f ./.deps/gprs_rlcmac_meas.Plo
rm -f ./.deps/gprs_rlcmac_sched.Plo
rm -f ./.deps/gsm_rlcmac.Plo
rm -f ./.deps/llc.Plo
rm -f ./.deps/mslot_class.Plo
rm -f ./.deps/nacc_fsm.Plo
rm -f ./.deps/neigh_cache.Plo
rm -f ./.deps/pcu_l1_if.Plo
rm -f ./.deps/pcu_main.Po
rm -f ./.deps/pcu_vty.Plo
rm -f ./.deps/pcu_vty_functions.Plo
rm -f ./.deps/pcuif_sock.Plo
rm -f ./.deps/pdch.Plo
rm -f ./.deps/pdch_ul_controller.Plo
rm -f ./.deps/rlc.Plo
rm -f ./.deps/rlc_window.Plo
rm -f ./.deps/rlc_window_dl.Plo
rm -f ./.deps/rlc_window_ul.Plo
rm -f ./.deps/sba.Plo
rm -f ./.deps/tbf.Plo
rm -f ./.deps/tbf_dl.Plo
rm -f ./.deps/tbf_dl_ass_fsm.Plo
rm -f ./.deps/tbf_dl_fsm.Plo
rm -f ./.deps/tbf_fsm.Plo
rm -f ./.deps/tbf_ul.Plo
rm -f ./.deps/tbf_ul_ack_fsm.Plo
rm -f ./.deps/tbf_ul_ass_fsm.Plo
rm -f ./.deps/tbf_ul_fsm.Plo
rm -f ericsson-rbs/.deps/er_ccu_if.Po
rm -f ericsson-rbs/.deps/er_ccu_l1_if.Po
rm -f osmo-bts-litecell15/.deps/lc15_l1_hw.Po
rm -f osmo-bts-litecell15/.deps/lc15_l1_if.Po
rm -f osmo-bts-litecell15/.deps/lc15bts.Po
rm -f osmo-bts-oc2g/.deps/oc2g_l1_hw.Po
rm -f osmo-bts-oc2g/.deps/oc2g_l1_if.Po
rm -f osmo-bts-oc2g/.deps/oc2gbts.Po
rm -f osmo-bts-sysmo/.deps/femtobts.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_fwd.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_hw.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_if.Po
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
test . = "." || test -z "" || rm -f 
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
test . = "." || test -z "" || rm -f 
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f 
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
	/bin/bash './testsuite' --clean
rm -f *.o
rm -f *.lo
 rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest
rm -f *.tab.c
test -z "" || rm -f 
 rm -f emu/pcu_emu
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf alloc/.libs alloc/_libs
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f 
rm -rf app_info/.libs app_info/_libs
rm -f alloc/.dirstamp
it deletes files that may require special tools to rebuild.
rm -rf bitcomp/.libs bitcomp/_libs
rm -f app_info/.dirstamp
rm -rf codel/.libs codel/_libs
rm -f bitcomp/.dirstamp
rm -rf edge/.libs edge/_libs
rm -f codel/.dirstamp
rm -rf emu/.libs emu/_libs
rm -f edge/.dirstamp
rm -rf fn/.libs fn/_libs
rm -f emu/.dirstamp
rm -rf llc/.libs llc/_libs
rm -f fn/.dirstamp
rm -rf llist/.libs llist/_libs
rm -f llc/.dirstamp
rm -rf ms/.libs ms/_libs
rm -f llist/.dirstamp
rm -rf rlcmac/.libs rlcmac/_libs
rm -f ms/.dirstamp
rm -rf tbf/.libs tbf/_libs
rm -f rlcmac/.dirstamp
rm -rf types/.libs types/_libs
rm -f tbf/.dirstamp
rm -rf ulc/.libs ulc/_libs
rm -f types/.dirstamp
rm -f ulc/.dirstamp
test -z "atconfig" || rm -f atconfig
rm -f ./.deps/AllocTest.Po
rm -f ./.deps/AppInfoTest.Po
rm -f ./.deps/BitcompTest.Po
rm -f ./.deps/EdgeTest.Po
rm -f ./.deps/FnTest.Po
rm -f ./.deps/LListTest.Po
rm -f ./.deps/LlcTest.Po
rm -f ./.deps/MsTest.Po
rm -f ./.deps/MslotTest.Po
rm -f ./.deps/PdchUlcTest.Po
rm -f ./.deps/RLCMACTest.Po
rm -f ./.deps/TbfTest.Po
rm -f ./.deps/TypesTest.Po
rm -f ./.deps/codel_test.Po
rm -f ./.deps/egprs_rlc_compression.Po
rm -f ./.deps/openbsc_clone.Po
rm -f ./.deps/pcu_emu.Po
rm -f ./.deps/test_pdp_activation.Po
rm -f ./.deps/test_replay_gprs_attach.Po
rm -f Makefile
make[1]: Leaving directory '/build/tests'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
test . = "." || test -z "" || rm -f 
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f 
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f 
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f 
This command is intended for maintainers to use
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing .cache/
Removing .texlive2022/
Removing Makefile.in
Removing aclocal.m4
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmo-abis
Skipping repository deps/libosmocore
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing doc/manuals/build
Removing doc/manuals/common
Removing doc/manuals/generated/
Removing doc/manuals/osmopcu-gb.pdf
Removing doc/manuals/osmopcu-gb__1.svg
Removing doc/manuals/osmopcu-usermanual.pdf
Removing doc/manuals/osmopcu-usermanual__1.svg
Removing doc/manuals/osmopcu-usermanual__2.svg
Removing doc/manuals/osmopcu-usermanual__3.svg
Removing doc/manuals/osmopcu-vty-reference.pdf
Removing doc/manuals/vty/pcu_vty_reference.xml
Removing include/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing missing
Removing osmo-pcu-1.5.0.4-8734.tar.bz2
Removing osmo-pcu-1.5.0.4-8734.tar.gz
Removing src/.deps/
Removing src/Makefile.in
Removing src/ericsson-rbs/.deps/
Removing src/osmo-bts-litecell15/.deps/
Removing src/osmo-bts-oc2g/.deps/
Removing src/osmo-bts-sysmo/.deps/
Removing tests/.deps/
Removing tests/Makefile.in
Removing tests/package.m4
Removing tests/testsuite
+ [ -d /build/deps ]
+ git_clean /build/deps/libosmo-abis
+ repos=/build/deps/libosmo-abis
+ [ ! -d /build/deps/libosmo-abis ]
+ [ ! -d /build/deps/libosmo-abis/.git ]
+ git -C /build/deps/libosmo-abis checkout -f HEAD
+ git -C /build/deps/libosmo-abis clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing install-sh
Removing libosmoabis.pc
Removing libosmotrau.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/e1_input.lo
Removing src/e1_input.o
Removing src/e1_input_vty.lo
Removing src/e1_input_vty.o
Removing src/init.lo
Removing src/init.o
Removing src/input/.deps/
Removing src/input/.dirstamp
Removing src/input/.libs/
Removing src/input/e1d.lo
Removing src/input/e1d.o
Removing src/input/ipa.lo
Removing src/input/ipa.o
Removing src/input/ipa_keepalive.lo
Removing src/input/ipa_keepalive.o
Removing src/input/ipaccess.lo
Removing src/input/ipaccess.o
Removing src/input/lapd.lo
Removing src/input/lapd.o
Removing src/input/lapd_pcap.lo
Removing src/input/lapd_pcap.o
Removing src/input/misdn.lo
Removing src/input/misdn.o
Removing src/input/rs232.lo
Removing src/input/rs232.o
Removing src/input/unixsocket.lo
Removing src/input/unixsocket.o
Removing src/ipa_proxy.lo
Removing src/ipa_proxy.o
Removing src/libosmoabis.la
Removing src/libosmotrau.la
Removing src/subchan_demux.lo
Removing src/subchan_demux.o
Removing src/trau/.deps/
Removing src/trau/.dirstamp
Removing src/trau/.libs/
Removing src/trau/libosmotrau_la-csd_ra2.lo
Removing src/trau/libosmotrau_la-csd_ra2.o
Removing src/trau/libosmotrau_la-osmo_ortp.lo
Removing src/trau/libosmotrau_la-osmo_ortp.o
Removing src/trau/libosmotrau_la-raa_prime_decode.lo
Removing src/trau/libosmotrau_la-raa_prime_decode.o
Removing src/trau/libosmotrau_la-raa_prime_encode.lo
Removing src/trau/libosmotrau_la-raa_prime_encode.o
Removing src/trau/libosmotrau_la-trau_frame.lo
Removing src/trau/libosmotrau_la-trau_frame.o
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.lo
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.o
Removing src/trau/libosmotrau_la-trau_rtp_conv.lo
Removing src/trau/libosmotrau_la-trau_rtp_conv.o
Removing src/trau/libosmotrau_la-trau_sync.lo
Removing src/trau/libosmotrau_la-trau_sync.o
Removing src/trau_frame.lo
Removing src/trau_frame.o
Removing stamp-h1
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/ipa_recv/.deps/
Removing tests/raa_prime/.deps/
Removing tests/rtp_test/.deps/
Removing tests/subchan_demux/.deps/
Removing tests/trau_conv/.deps/
Removing tests/trau_pcu_ericsson/.deps/
Removing tests/trau_sync/.deps/
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/atlocal
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ [ -d layer1-headers ]
[False] $ /bin/sh -xe /tmp/jenkins13160975706107452363.sh
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-pcu/FIRMWARE_VERSION/master/WITH_MANUALS/1/label/osmocom-master/with_dsp/none/with_vty/False
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-pcu/FIRMWARE_VERSION/master/WITH_MANUALS/1/label/osmocom-master/with_dsp/none/with_vty/False
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 570555 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz". Configuration error?
Finished: SUCCESS