Skipping 98 KB..
Full Log /usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmoabis.la libosmotrau.la '/build/deps/install/stow/libosmo-abis/lib'
libtool: install: /usr/bin/install -c .libs/libosmoabis.so.13.1.0 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.so.13.1.0
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.13.1.0 libosmoabis.so.13 || { rm -f libosmoabis.so.13 && ln -s libosmoabis.so.13.1.0 libosmoabis.so.13; }; })
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.13.1.0 libosmoabis.so || { rm -f libosmoabis.so && ln -s libosmoabis.so.13.1.0 libosmoabis.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoabis.lai /build/deps/install/stow/libosmo-abis/lib/libosmoabis.la
libtool: install: /usr/bin/install -c .libs/libosmotrau.so.10.0.0 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.so.10.0.0
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.10.0.0 libosmotrau.so.10 || { rm -f libosmotrau.so.10 && ln -s libosmotrau.so.10.0.0 libosmotrau.so.10; }; })
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.10.0.0 libosmotrau.so || { rm -f libosmotrau.so && ln -s libosmotrau.so.10.0.0 libosmotrau.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmotrau.lai /build/deps/install/stow/libosmo-abis/lib/libosmotrau.la
libtool: install: /usr/bin/install -c .libs/libosmoabis.a /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: /usr/bin/install -c .libs/libosmotrau.a /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmo-abis/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmo-abis/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Leaving directory '/build/deps/libosmo-abis/src'
make[2]: Leaving directory '/build/deps/libosmo-abis/src'
Making install in tests
make[2]: Entering directory '/build/deps/libosmo-abis/tests'
make[3]: Entering directory '/build/deps/libosmo-abis/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/deps/libosmo-abis/tests'
make[2]: Leaving directory '/build/deps/libosmo-abis/tests'
Making install in doc
make[2]: Entering directory '/build/deps/libosmo-abis/doc'
Making install in examples
make[3]: Entering directory '/build/deps/libosmo-abis/doc/examples'
CC lapd-over-datagram/lapd-over-datagram-network.o
CC lapd-over-datagram/lapd-over-datagram-user.o
lapd-over-datagram/lapd-over-datagram-network.c: In function 'main':
lapd-over-datagram/lapd-over-datagram-network.c:154:9: warning: 'lapd_instance_alloc' is deprecated: Use lapd_instance_alloc2() instead [-Wdeprecated-declarations]
154 | lapd = lapd_instance_alloc(1, lapd_tx_cb, conn, lapd_rx_cb, conn,
| ^~~~
In file included from lapd-over-datagram/lapd-over-datagram-network.c:13:
../../include/osmocom/abis/lapd.h:63:23: note: declared here
63 | struct lapd_instance *lapd_instance_alloc(int network_side,
| ^~~~~~~~~~~~~~~~~~~
lapd-over-datagram/lapd-over-datagram-user.c: In function 'main':
lapd-over-datagram/lapd-over-datagram-user.c:204:9: warning: 'lapd_instance_alloc' is deprecated: Use lapd_instance_alloc2() instead [-Wdeprecated-declarations]
204 | lapd = lapd_instance_alloc(0, lapd_tx_cb, NULL, lapd_rx_cb, &num_msgs,
| ^~~~
In file included from lapd-over-datagram/lapd-over-datagram-user.c:16:
../../include/osmocom/abis/lapd.h:63:23: note: declared here
63 | struct lapd_instance *lapd_instance_alloc(int network_side,
| ^~~~~~~~~~~~~~~~~~~
CCLD lapd-over-datagram-network
CCLD lapd-over-datagram-user
make[4]: Entering directory '/build/deps/libosmo-abis/doc/examples'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/libosmo-abis/doc/examples'
make[3]: Leaving directory '/build/deps/libosmo-abis/doc/examples'
make[3]: Entering directory '/build/deps/libosmo-abis/doc'
make[4]: Entering directory '/build/deps/libosmo-abis/doc'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/libosmo-abis/doc'
make[3]: Leaving directory '/build/deps/libosmo-abis/doc'
make[2]: Leaving directory '/build/deps/libosmo-abis/doc'
make[2]: Entering directory '/build/deps/libosmo-abis'
make[3]: Entering directory '/build/deps/libosmo-abis'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmoabis.pc libosmotrau.pc '/build/deps/install/stow/libosmo-abis/lib/pkgconfig'
make[3]: Leaving directory '/build/deps/libosmo-abis'
make[2]: Leaving directory '/build/deps/libosmo-abis'
make[1]: Leaving directory '/build/deps/libosmo-abis'
+ STOW_DIR=/build/deps/install/stow stow --restow libosmo-abis
+ [ 0 = 1 ]
+ set +x
+ autoreconf --install --force
=============================== osmo-pcu ===============================
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:42: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:42: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:42: the top level
configure.ac:93: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:93: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:93: the top level
configure.ac:134: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:134: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:134: the top level
configure.ac:153: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:153: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:153: the top level
configure.ac:172: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:172: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:172: the top level
configure.ac:183: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:183: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:183: the top level
configure.ac:263: warning: AC_OUTPUT should be used without arguments.
configure.ac:263: You should run autoupdate.
configure.ac:24: installing './compile'
configure.ac:27: installing './config.guess'
configure.ac:27: installing './config.sub'
configure.ac:9: installing './install-sh'
configure.ac:9: installing './missing'
src/Makefile.am: installing './depcomp'
tests/Makefile.am:34: warning: source file 'alloc/AllocTest.cpp' is in a subdirectory,
tests/Makefile.am:34: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least one source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However, this
automake: behavior may change in a future Automake major version, with object
automake: files being placed in the same subdirectory as the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
tests/Makefile.am:47: warning: source file 'alloc/MslotTest.cpp' is in a subdirectory,
tests/Makefile.am:47: but option 'subdir-objects' is disabled
tests/Makefile.am:154: warning: source file 'app_info/AppInfoTest.cpp' is in a subdirectory,
tests/Makefile.am:154: but option 'subdir-objects' is disabled
tests/Makefile.am:69: warning: source file 'bitcomp/BitcompTest.cpp' is in a subdirectory,
tests/Makefile.am:69: but option 'subdir-objects' is disabled
tests/Makefile.am:69: warning: source file '../src/egprs_rlc_compression.cpp' is in a subdirectory,
tests/Makefile.am:69: but option 'subdir-objects' is disabled
tests/Makefile.am:138: warning: source file 'codel/codel_test.c' is in a subdirectory,
tests/Makefile.am:138: but option 'subdir-objects' is disabled
tests/Makefile.am:76: warning: source file 'edge/EdgeTest.cpp' is in a subdirectory,
tests/Makefile.am:76: but option 'subdir-objects' is disabled
tests/Makefile.am:85: warning: source file 'emu/pcu_emu.cpp' is in a subdirectory,
tests/Makefile.am:85: but option 'subdir-objects' is disabled
tests/Makefile.am:85: warning: source file 'emu/test_replay_gprs_attach.cpp' is in a subdirectory,
tests/Makefile.am:85: but option 'subdir-objects' is disabled
tests/Makefile.am:85: warning: source file 'emu/openbsc_clone.c' is in a subdirectory,
tests/Makefile.am:85: but option 'subdir-objects' is disabled
tests/Makefile.am:85: warning: source file 'emu/test_pdp_activation.cpp' is in a subdirectory,
tests/Makefile.am:85: but option 'subdir-objects' is disabled
tests/Makefile.am:145: warning: source file 'fn/FnTest.cpp' is in a subdirectory,
tests/Makefile.am:145: but option 'subdir-objects' is disabled
tests/Makefile.am:119: warning: source file 'llc/LlcTest.cpp' is in a subdirectory,
tests/Makefile.am:119: but option 'subdir-objects' is disabled
tests/Makefile.am:133: warning: source file 'llist/LListTest.cpp' is in a subdirectory,
tests/Makefile.am:133: but option 'subdir-objects' is disabled
tests/Makefile.am:105: warning: source file 'ms/MsTest.cpp' is in a subdirectory,
tests/Makefile.am:105: but option 'subdir-objects' is disabled
tests/Makefile.am:28: warning: source file 'rlcmac/RLCMACTest.cpp' is in a subdirectory,
tests/Makefile.am:28: but option 'subdir-objects' is disabled
tests/Makefile.am:56: warning: source file 'tbf/TbfTest.cpp' is in a subdirectory,
tests/Makefile.am:56: but option 'subdir-objects' is disabled
tests/Makefile.am:96: warning: source file 'types/TypesTest.cpp' is in a subdirectory,
tests/Makefile.am:96: but option 'subdir-objects' is disabled
tests/Makefile.am:167: warning: source file 'ulc/PdchUlcTest.cpp' is in a subdirectory,
tests/Makefile.am:167: but option 'subdir-objects' is disabled
+ ./configure --enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... unsupported
checking for g++ option to enable C++98 features... none needed
checking dependency style of g++... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmogb >= 1.10.0... yes
checking whether to enable direct DSP access for PDCH of sysmocom-bts... unset
checking whether to enable direct PHY access for PDCH of NuRAN Wireless Litecell 1.5 BTS... yes
checking whether to enable direct PHY access for PDCH of NuRAN Wireless OC-2G BTS... no
checking whether to enable direct E1 CCU access for PDCH of Ericsson RBS... no
checking for python... no
checking for python2... no
checking for python3... /usr/bin/python3
checking for python version... 3.11
checking for python platform... linux
checking for GNU default python prefix... ${prefix}
checking for GNU default python exec_prefix... ${exec_prefix}
checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages
checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages
checking for osmotestvty.py... yes
checking whether to enable VTY tests... yes
CPPFLAGS=""
CFLAGS=" -std=gnu11"
CXXFLAGS=" -std=gnu++03"
LDFLAGS=""
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating tests/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 1.5.0.6-46529 > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '/build'
Making all in include
make[2]: Entering directory '/build/include'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/include'
Making all in src
make[2]: Entering directory '/build/src'
CXX pcu_main.o
CC gprs_debug.lo
CXX alloc_algo.lo
CC csn1.lo
CC csn1_enc.lo
CC csn1_dec.lo
CC gprs_bssgp_pcu.lo
CC gsm_rlcmac.lo
CC gprs_bssgp_rim.lo
CXX gprs_rlcmac_sched.lo
CC gprs_rlcmac.lo
CXX gprs_rlcmac_meas.lo
CC gprs_ms.lo
CC gprs_pcu.lo
CXX pcu_l1_if.lo
CC pcu_vty.lo
CXX pcu_vty_functions.lo
CC mslot_class.lo
CC nacc_fsm.lo
CC neigh_cache.lo
CXX tbf.lo
CC tbf_fsm.lo
CXX tbf_ul.lo
CC tbf_ul_fsm.lo
CC tbf_ul_ack_fsm.lo
CC tbf_ul_ass_fsm.lo
CXX tbf_dl.lo
CC tbf_dl_fsm.lo
CC tbf_dl_ass_fsm.lo
CXX bts.lo
CC bts_pch_timer.lo
CXX pdch.lo
CC pdch_ul_controller.lo
CXX encoding.lo
CC sba.lo
CXX decoding.lo
CC llc.lo
CXX rlc.lo
CXX rlc_window.lo
CXX rlc_window_dl.lo
CXX rlc_window_ul.lo
CC pcuif_sock.lo
CC gprs_codel.lo
CC coding_scheme.lo
CXX egprs_rlc_compression.lo
CC osmo-bts-litecell15/lc15_l1_if.o
CC osmo-bts-litecell15/lc15_l1_hw.o
CC osmo-bts-litecell15/lc15bts.o
osmo-bts-litecell15/lc15_l1_if.c: In function 'prim_init':
osmo-bts-litecell15/lc15_l1_if.c:80:47: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
80 | prim->u.mphCloseReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
osmo-bts-litecell15/lc15_l1_if.c:83:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
83 | prim->u.mphConnectReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
osmo-bts-litecell15/lc15_l1_if.c:86:52: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
86 | prim->u.mphDisconnectReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
osmo-bts-litecell15/lc15_l1_if.c:89:50: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
89 | prim->u.mphActivateReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
osmo-bts-litecell15/lc15_l1_if.c:92:52: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
92 | prim->u.mphDeactivateReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
osmo-bts-litecell15/lc15_l1_if.c:95:48: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
95 | prim->u.mphConfigReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
osmo-bts-litecell15/lc15_l1_if.c:98:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
98 | prim->u.mphMeasureReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
osmo-bts-litecell15/lc15_l1_if.c:114:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
114 | prim->u.phEmptyFrameReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
osmo-bts-litecell15/lc15_l1_if.c:117:45: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
117 | prim->u.phDataReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
In file included from ./gprs_debug.h:21,
from osmo-bts-litecell15/lc15_l1_if.c:35:
osmo-bts-litecell15/lc15_l1_if.c: In function 'handle_ph_data_ind':
osmo-bts-litecell15/lc15_l1_if.c:208:23: warning: format '%x' expects argument of type 'unsigned int', but argument 11 has type 'HANDLE' {aka 'void *'} [-Wformat=]
208 | DEBUGP(DL1IF, "(trx=%" PRIu8 ",ts=%u) FN=%u Rx PH-DATA.ind %s (hL2 %08x): %s\n",
| ^~~~~~~~
......
211 | data_ind->hLayer2,
| ~~~~~~~~~~~~~~~~~
| |
| HANDLE {aka void *}
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:112:82: note: in definition of macro 'LOGPSRCC'
112 | logp2(ss, level, caller_file, caller_line, cont, fmt, ##args); \
| ^~~
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:50:9: note: in expansion of macro 'LOGPSRC'
50 | LOGPSRC(ss, level, NULL, 0, fmt, ## args)
| ^~~~~~~
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:30:34: note: in expansion of macro 'LOGP'
30 | #define DEBUGP(ss, fmt, args...) LOGP(ss, LOGL_DEBUG, fmt, ##args)
| ^~~~
osmo-bts-litecell15/lc15_l1_if.c:208:9: note: in expansion of macro 'DEBUGP'
208 | DEBUGP(DL1IF, "(trx=%" PRIu8 ",ts=%u) FN=%u Rx PH-DATA.ind %s (hL2 %08x): %s\n",
| ^~~~~~
osmo-bts-litecell15/lc15_l1_if.c:208:23: warning: format '%x' expects argument of type 'unsigned int', but argument 11 has type 'HANDLE' {aka 'void *'} [-Wformat=]
208 | DEBUGP(DL1IF, "(trx=%" PRIu8 ",ts=%u) FN=%u Rx PH-DATA.ind %s (hL2 %08x): %s\n",
| ^~~~~~~~
......
211 | data_ind->hLayer2,
| ~~~~~~~~~~~~~~~~~
| |
| HANDLE {aka void *}
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:114:76: note: in definition of macro 'LOGPSRCC'
114 | logp2(ss, level, __FILE__, __LINE__, cont, fmt, ##args); \
| ^~~
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:50:9: note: in expansion of macro 'LOGPSRC'
50 | LOGPSRC(ss, level, NULL, 0, fmt, ## args)
| ^~~~~~~
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:30:34: note: in expansion of macro 'LOGP'
30 | #define DEBUGP(ss, fmt, args...) LOGP(ss, LOGL_DEBUG, fmt, ##args)
| ^~~~
osmo-bts-litecell15/lc15_l1_if.c:208:9: note: in expansion of macro 'DEBUGP'
208 | DEBUGP(DL1IF, "(trx=%" PRIu8 ",ts=%u) FN=%u Rx PH-DATA.ind %s (hL2 %08x): %s\n",
| ^~~~~~
osmo-bts-litecell15/lc15_l1_if.c: In function 'l1if_pdch_req':
osmo-bts-litecell15/lc15_l1_if.c:351:29: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
351 | data_req->hLayer1 = (HANDLE)fl1h->hLayer1;
| ^
CXXLD libgprs.la
copying selected object files to avoid basename conflicts...
CXXLD osmo-pcu
make[2]: Leaving directory '/build/src'
Making all in doc
make[2]: Entering directory '/build/doc'
Making all in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/examples'
Making all in manuals
make[3]: Entering directory '/build/doc/manuals'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/manuals'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making all in tests
make[2]: Entering directory '/build/tests'
CXX pcu_emu.o
CXX test_replay_gprs_attach.o
CXX test_pdp_activation.o
CC openbsc_clone.o
CXXLD emu/pcu_emu
make[2]: Leaving directory '/build/tests'
Making all in contrib
make[2]: Entering directory '/build/contrib'
Making all in systemd
make[3]: Entering directory '/build/contrib/systemd'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/contrib/systemd'
make[3]: Entering directory '/build/contrib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/contrib'
make[2]: Leaving directory '/build/contrib'
make[2]: Entering directory '/build'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ DISTCHECK_CONFIGURE_FLAGS= --enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests make -j 8 distcheck
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make distdir-am
make[2]: Entering directory '/build'
if test -d "osmo-pcu-1.5.0.6-46529"; then find "osmo-pcu-1.5.0.6-46529" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.6-46529" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.6-46529"; }; else :; fi
test -d "osmo-pcu-1.5.0.6-46529" || mkdir "osmo-pcu-1.5.0.6-46529"
(cd include && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/include'
make distdir-am
make[4]: Entering directory '/build/include'
make[4]: Leaving directory '/build/include'
make[3]: Leaving directory '/build/include'
(cd src && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/src'
make distdir-am
make[4]: Entering directory '/build/src'
make[4]: Leaving directory '/build/src'
make[3]: Leaving directory '/build/src'
(cd doc && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make distdir-am
make[4]: Entering directory '/build/doc'
(cd examples && make top_distdir=../../osmo-pcu-1.5.0.6-46529 distdir=../../osmo-pcu-1.5.0.6-46529/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/examples'
make distdir-am
make[6]: Entering directory '/build/doc/examples'
make[6]: Leaving directory '/build/doc/examples'
make[5]: Leaving directory '/build/doc/examples'
(cd manuals && make top_distdir=../../osmo-pcu-1.5.0.6-46529 distdir=../../osmo-pcu-1.5.0.6-46529/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/manuals'
make distdir-am
make[6]: Entering directory '/build/doc/manuals'
make[6]: Leaving directory '/build/doc/manuals'
make[5]: Leaving directory '/build/doc/manuals'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
(cd tests && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/tests'
make distdir-am
make[4]: Entering directory '/build/tests'
:;{ \
echo '# Signature of the current package.' && \
echo 'm4_define([AT_PACKAGE_NAME],' && \
echo ' [osmo-pcu])' && \
echo 'm4_define([AT_PACKAGE_TARNAME],' && \
echo ' [osmo-pcu])' && \
echo 'm4_define([AT_PACKAGE_VERSION],' && \
echo ' [1.5.0.6-46529])' && \
echo 'm4_define([AT_PACKAGE_STRING],' && \
echo ' [osmo-pcu 1.5.0.6-46529])' && \
echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \
echo ' [osmocom-net-gprs@lists.osmocom.org])'; \
echo 'm4_define([AT_PACKAGE_URL],' && \
echo ' [])'; \
} >'./package.m4'
/bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at
mv testsuite.tmp testsuite
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
(cd contrib && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/contrib'
make distdir-am
make[4]: Entering directory '/build/contrib'
(cd systemd && make top_distdir=../../osmo-pcu-1.5.0.6-46529 distdir=../../osmo-pcu-1.5.0.6-46529/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/contrib/systemd'
make distdir-am
make[6]: Entering directory '/build/contrib/systemd'
make[6]: Leaving directory '/build/contrib/systemd'
make[5]: Leaving directory '/build/contrib/systemd'
make[4]: Leaving directory '/build/contrib'
make[3]: Leaving directory '/build/contrib'
make \
top_distdir="osmo-pcu-1.5.0.6-46529" distdir="osmo-pcu-1.5.0.6-46529" \
dist-hook
make[3]: Entering directory '/build'
echo 1.5.0.6-46529 > osmo-pcu-1.5.0.6-46529/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "osmo-pcu-1.5.0.6-46529" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-pcu-1.5.0.6-46529"
make[2]: Leaving directory '/build'
tardir=osmo-pcu-1.5.0.6-46529 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-pcu-1.5.0.6-46529.tar.bz2
tardir=osmo-pcu-1.5.0.6-46529 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-pcu-1.5.0.6-46529.tar.gz
make[1]: Leaving directory '/build'
if test -d "osmo-pcu-1.5.0.6-46529"; then find "osmo-pcu-1.5.0.6-46529" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.6-46529" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.6-46529"; }; else :; fi
case 'osmo-pcu-1.5.0.6-46529.tar.gz osmo-pcu-1.5.0.6-46529.tar.bz2' in \
*.tar.gz*) \
eval GZIP= gzip --best -dc osmo-pcu-1.5.0.6-46529.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
bzip2 -dc osmo-pcu-1.5.0.6-46529.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
lzip -dc osmo-pcu-1.5.0.6-46529.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
xz -dc osmo-pcu-1.5.0.6-46529.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
uncompress -c osmo-pcu-1.5.0.6-46529.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
eval GZIP= gzip --best -dc osmo-pcu-1.5.0.6-46529.shar.gz | unshar ;;\
*.zip*) \
unzip osmo-pcu-1.5.0.6-46529.zip ;;\
*.tar.zst*) \
zstd -dc osmo-pcu-1.5.0.6-46529.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w osmo-pcu-1.5.0.6-46529
chmod u+w osmo-pcu-1.5.0.6-46529
mkdir osmo-pcu-1.5.0.6-46529/_build osmo-pcu-1.5.0.6-46529/_build/sub osmo-pcu-1.5.0.6-46529/_inst
chmod a-w osmo-pcu-1.5.0.6-46529
test -d osmo-pcu-1.5.0.6-46529/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
&& am__cwd=`pwd` \
&& CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_build/sub \
&& ../../configure \
--with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \
--enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests \
--srcdir=../.. --prefix="$dc_install_base" \
&& make \
&& make dvi \
&& make check \
&& make install \
&& make installcheck \
&& make uninstall \
&& make distuninstallcheck_dir="$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$dc_destdir") \
&& make DESTDIR="$dc_destdir" install \
&& make DESTDIR="$dc_destdir" uninstall \
&& make DESTDIR="$dc_destdir" \
distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
} || { rm -rf "$dc_destdir"; exit 1; }) \
&& rm -rf "$dc_destdir" \
&& make dist \
&& rm -rf osmo-pcu-1.5.0.6-46529.tar.gz osmo-pcu-1.5.0.6-46529.tar.bz2 \
&& make distcleancheck \
&& cd "$am__cwd" \
|| exit 1
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... unsupported
checking for g++ option to enable C++98 features... none needed
checking dependency style of g++... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmogb >= 1.10.0... yes
checking whether to enable direct DSP access for PDCH of sysmocom-bts... unset
checking whether to enable direct PHY access for PDCH of NuRAN Wireless Litecell 1.5 BTS... yes
checking whether to enable direct PHY access for PDCH of NuRAN Wireless OC-2G BTS... no
checking whether to enable direct E1 CCU access for PDCH of Ericsson RBS... no
checking for python... no
checking for python2... no
checking for python3... /usr/bin/python3
checking for python version... 3.11
checking for python platform... linux
checking for GNU default python prefix... ${prefix}
checking for GNU default python exec_prefix... ${exec_prefix}
checking for python script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages
checking for python extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages
checking for osmotestvty.py... yes
checking whether to enable VTY tests... yes
CPPFLAGS=""
CFLAGS=" -std=gnu11"
CXXFLAGS=" -std=gnu++03"
LDFLAGS=""
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating tests/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make all-recursive
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making all in include
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making all in src
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
CXX pcu_main.o
CXX alloc_algo.lo
CC csn1.lo
CC gprs_debug.lo
CC csn1_enc.lo
CC csn1_dec.lo
CC gsm_rlcmac.lo
CC gprs_bssgp_pcu.lo
CC gprs_bssgp_rim.lo
CC gprs_rlcmac.lo
CXX gprs_rlcmac_sched.lo
CXX gprs_rlcmac_meas.lo
CC gprs_ms.lo
CC gprs_pcu.lo
CXX pcu_l1_if.lo
CC pcu_vty.lo
CXX pcu_vty_functions.lo
CC mslot_class.lo
CC nacc_fsm.lo
CC neigh_cache.lo
CXX tbf.lo
CC tbf_fsm.lo
CXX tbf_ul.lo
CC tbf_ul_fsm.lo
CC tbf_ul_ack_fsm.lo
CC tbf_ul_ass_fsm.lo
CXX tbf_dl.lo
CC tbf_dl_fsm.lo
CC tbf_dl_ass_fsm.lo
CXX bts.lo
CXX pdch.lo
CC bts_pch_timer.lo
CC pdch_ul_controller.lo
CXX encoding.lo
CC sba.lo
CXX decoding.lo
CC llc.lo
CXX rlc.lo
CXX rlc_window.lo
CXX rlc_window_dl.lo
CXX rlc_window_ul.lo
CC pcuif_sock.lo
CC gprs_codel.lo
CC coding_scheme.lo
CXX egprs_rlc_compression.lo
CC osmo-bts-litecell15/lc15_l1_if.o
CC osmo-bts-litecell15/lc15_l1_hw.o
CC osmo-bts-litecell15/lc15bts.o
../../../src/osmo-bts-litecell15/lc15_l1_if.c: In function 'prim_init':
../../../src/osmo-bts-litecell15/lc15_l1_if.c:80:47: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
80 | prim->u.mphCloseReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
../../../src/osmo-bts-litecell15/lc15_l1_if.c:83:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
83 | prim->u.mphConnectReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
../../../src/osmo-bts-litecell15/lc15_l1_if.c:86:52: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
86 | prim->u.mphDisconnectReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
../../../src/osmo-bts-litecell15/lc15_l1_if.c:89:50: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
89 | prim->u.mphActivateReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
../../../src/osmo-bts-litecell15/lc15_l1_if.c:92:52: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
92 | prim->u.mphDeactivateReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
../../../src/osmo-bts-litecell15/lc15_l1_if.c:95:48: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
95 | prim->u.mphConfigReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
../../../src/osmo-bts-litecell15/lc15_l1_if.c:98:49: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
98 | prim->u.mphMeasureReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
../../../src/osmo-bts-litecell15/lc15_l1_if.c:114:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
114 | prim->u.phEmptyFrameReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
../../../src/osmo-bts-litecell15/lc15_l1_if.c:117:45: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
117 | prim->u.phDataReq.hLayer1 = (HANDLE)gl1->hLayer1;
| ^
In file included from ../../../src/gprs_debug.h:21,
from ../../../src/osmo-bts-litecell15/lc15_l1_if.c:35:
../../../src/osmo-bts-litecell15/lc15_l1_if.c: In function 'handle_ph_data_ind':
../../../src/osmo-bts-litecell15/lc15_l1_if.c:208:23: warning: format '%x' expects argument of type 'unsigned int', but argument 11 has type 'HANDLE' {aka 'void *'} [-Wformat=]
208 | DEBUGP(DL1IF, "(trx=%" PRIu8 ",ts=%u) FN=%u Rx PH-DATA.ind %s (hL2 %08x): %s\n",
| ^~~~~~~~
......
211 | data_ind->hLayer2,
| ~~~~~~~~~~~~~~~~~
| |
| HANDLE {aka void *}
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:112:82: note: in definition of macro 'LOGPSRCC'
112 | logp2(ss, level, caller_file, caller_line, cont, fmt, ##args); \
| ^~~
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:50:9: note: in expansion of macro 'LOGPSRC'
50 | LOGPSRC(ss, level, NULL, 0, fmt, ## args)
| ^~~~~~~
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:30:34: note: in expansion of macro 'LOGP'
30 | #define DEBUGP(ss, fmt, args...) LOGP(ss, LOGL_DEBUG, fmt, ##args)
| ^~~~
../../../src/osmo-bts-litecell15/lc15_l1_if.c:208:9: note: in expansion of macro 'DEBUGP'
208 | DEBUGP(DL1IF, "(trx=%" PRIu8 ",ts=%u) FN=%u Rx PH-DATA.ind %s (hL2 %08x): %s\n",
| ^~~~~~
../../../src/osmo-bts-litecell15/lc15_l1_if.c:208:23: warning: format '%x' expects argument of type 'unsigned int', but argument 11 has type 'HANDLE' {aka 'void *'} [-Wformat=]
208 | DEBUGP(DL1IF, "(trx=%" PRIu8 ",ts=%u) FN=%u Rx PH-DATA.ind %s (hL2 %08x): %s\n",
| ^~~~~~~~
......
211 | data_ind->hLayer2,
| ~~~~~~~~~~~~~~~~~
| |
| HANDLE {aka void *}
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:114:76: note: in definition of macro 'LOGPSRCC'
114 | logp2(ss, level, __FILE__, __LINE__, cont, fmt, ##args); \
| ^~~
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:50:9: note: in expansion of macro 'LOGPSRC'
50 | LOGPSRC(ss, level, NULL, 0, fmt, ## args)
| ^~~~~~~
/build/deps/install/stow/libosmocore/include/osmocom/core/logging.h:30:34: note: in expansion of macro 'LOGP'
30 | #define DEBUGP(ss, fmt, args...) LOGP(ss, LOGL_DEBUG, fmt, ##args)
| ^~~~
../../../src/osmo-bts-litecell15/lc15_l1_if.c:208:9: note: in expansion of macro 'DEBUGP'
208 | DEBUGP(DL1IF, "(trx=%" PRIu8 ",ts=%u) FN=%u Rx PH-DATA.ind %s (hL2 %08x): %s\n",
| ^~~~~~
../../../src/osmo-bts-litecell15/lc15_l1_if.c: In function 'l1if_pdch_req':
../../../src/osmo-bts-litecell15/lc15_l1_if.c:351:29: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
351 | data_req->hLayer1 = (HANDLE)fl1h->hLayer1;
| ^
CXXLD libgprs.la
copying selected object files to avoid basename conflicts...
CXXLD osmo-pcu
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making all in doc
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making all in examples
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making all in manuals
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making all in tests
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
CXX pcu_emu.o
CXX test_replay_gprs_attach.o
CC openbsc_clone.o
CXX test_pdp_activation.o
CXXLD emu/pcu_emu
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making all in contrib
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making dvi in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making dvi in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[2]: Nothing to be done for 'dvi'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making check in doc
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making check in examples
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making check in manuals
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making check in tests
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
CXX RLCMACTest.o
CXX AllocTest.o
CXX MslotTest.o
CXX TbfTest.o
CXX TypesTest.o
CXX MsTest.o
CXX LListTest.o
CXX LlcTest.o
CC codel_test.o
CXX EdgeTest.o
CXX BitcompTest.o
CXX egprs_rlc_compression.o
CXX FnTest.o
CXX AppInfoTest.o
CXX PdchUlcTest.o
CXXLD rlcmac/RLCMACTest
CXXLD alloc/AllocTest
CXXLD alloc/MslotTest
CXXLD tbf/TbfTest
CXXLD types/TypesTest
CXXLD ms/MsTest
CXXLD llist/LListTest
CXXLD llc/LlcTest
CCLD codel/codel_test
CXXLD edge/EdgeTest
CXXLD bitcomp/BitcompTest
CXXLD fn/FnTest
CXXLD app_info/AppInfoTest
CXXLD ulc/PdchUlcTest
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make check-local
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## ---------------------------------- ##
## osmo-pcu 1.5.0.6-46529 test suite. ##
## ---------------------------------- ##
Regression tests
1: rlcmac ok
2: multi_slot ok
3: ts_alloc ok
4: tbf ok
5: bitcomp ok
6: edge ok
7: types ok
8: ms ok
9: llc ok
10: llist ok
11: codel ok
12: fn ok
13: app_info ok
14: ulc ok
## ------------- ##
## Test results. ##
## ------------- ##
All 14 tests were successful.
make python-tests
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
osmotestvty.py -p /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.. -w /build/osmo-pcu-1.5.0.6-46529/_build/sub -v
test_history (__main__.TestVTY.test_history) ... confpath /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.., workdir /build/osmo-pcu-1.5.0.6-46529/_build/sub
Running tests for specific VTY commands
Launch: src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg from /build/osmo-pcu-1.5.0.6-46529/_build/sub
Opening /dev/null
Launching: PWD=/build/osmo-pcu-1.5.0.6-46529/_build/sub 'src/osmo-pcu' '-c' '/build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg'
> ls -l /proc/49570/fd
total 0
lr-x------ 1 build build 64 Dec 10 07:30 0 -> pipe:[2247733680]
l-wx------ 1 build build 64 Dec 10 07:30 1 -> pipe:[2247733681]
l-wx------ 1 build build 64 Dec 10 07:30 2 -> pipe:[2247733682]
l-wx------ 1 build build 64 Dec 10 07:30 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4240 0.0.0.0:*
> ps xua | grep osmo
build 38936 0.0 0.0 3924 3000 ? S 07:30 0:00 /bin/bash -c test -d osmo-pcu-1.5.0.6-46529/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-pcu-1.5.0.6-46529.tar.gz osmo-pcu-1.5.0.6-46529.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 44719 0.0 0.0 3924 3028 ? S 07:30 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-pcu-1.5.0.6-46529/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc tests contrib' ;; \ *) list='include src doc tests contrib' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 49570 62.5 0.0 27872 23172 ? S 07:30 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.. -w /build/osmo-pcu-1.5.0.6-46529/_build/sub -v
build 49571 0.0 0.0 17048 8916 ? S 07:30 0:00 src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg
build 49578 0.0 0.0 2576 944 ? S 07:30 0:00 /bin/sh -c ps xua | grep osmo
build 49580 0.0 0.0 3700 1760 ? S 07:30 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55874), raddr=('127.0.0.1', 4240)> (1 sockets open)
Socket: closing 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55874), raddr=('127.0.0.1', 4240)> (0 sockets open)
Process returned code: 0
Launch: src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg from /build/osmo-pcu-1.5.0.6-46529/_build/sub
Launching: PWD=/build/osmo-pcu-1.5.0.6-46529/_build/sub 'src/osmo-pcu' '-c' '/build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg'
> ls -l /proc/49570/fd
total 0
lr-x------ 1 build build 64 Dec 10 07:30 0 -> pipe:[2247733680]
l-wx------ 1 build build 64 Dec 10 07:30 1 -> pipe:[2247733681]
l-wx------ 1 build build 64 Dec 10 07:30 2 -> pipe:[2247733682]
l-wx------ 1 build build 64 Dec 10 07:30 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4240 0.0.0.0:*
> ps xua | grep osmo
build 38936 0.0 0.0 3924 3000 ? S 07:30 0:00 /bin/bash -c test -d osmo-pcu-1.5.0.6-46529/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-pcu-1.5.0.6-46529.tar.gz osmo-pcu-1.5.0.6-46529.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 44719 0.0 0.0 3924 3028 ? S 07:30 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-pcu-1.5.0.6-46529/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc tests contrib' ;; \ *) list='include src doc tests contrib' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 49570 25.6 0.0 27872 23172 ? S 07:30 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.. -w /build/osmo-pcu-1.5.0.6-46529/_build/sub -v
build 49581 0.0 0.0 17048 8852 ? S 07:30 0:00 src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg
build 49588 0.0 0.0 2576 920 ? S 07:30 0:00 /bin/sh -c ps xua | grep osmo
build 49590 0.0 0.0 3700 1876 ? S 07:30 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55894), raddr=('127.0.0.1', 4240)> (1 sockets open)
Socket: closing 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55894), raddr=('127.0.0.1', 4240)> (0 sockets open)
Process returned code: 0
Launch: src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg from /build/osmo-pcu-1.5.0.6-46529/_build/sub
Launching: PWD=/build/osmo-pcu-1.5.0.6-46529/_build/sub 'src/osmo-pcu' '-c' '/build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg'
> ls -l /proc/49570/fd
total 0
lr-x------ 1 build build 64 Dec 10 07:30 0 -> pipe:[2247733680]
l-wx------ 1 build build 64 Dec 10 07:30 1 -> pipe:[2247733681]
l-wx------ 1 build build 64 Dec 10 07:30 2 -> pipe:[2247733682]
l-wx------ 1 build build 64 Dec 10 07:30 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4240 0.0.0.0:*
> ps xua | grep osmo
build 38936 0.0 0.0 3924 3000 ? S 07:30 0:00 /bin/bash -c test -d osmo-pcu-1.5.0.6-46529/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-pcu-1.5.0.6-46529.tar.gz osmo-pcu-1.5.0.6-46529.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 44719 0.0 0.0 3924 3028 ? S 07:30 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-pcu-1.5.0.6-46529/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc tests contrib' ;; \ *) list='include src doc tests contrib' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 49570 16.1 0.0 27872 23172 ? S 07:30 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.. -w /build/osmo-pcu-1.5.0.6-46529/_build/sub -v
build 49591 0.0 0.0 17048 8956 ? S 07:30 0:00 src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg
build 49598 0.0 0.0 2576 908 ? S 07:30 0:00 /bin/sh -c ps xua | grep osmo
build 49600 0.0 0.0 3700 1836 ? S 07:30 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 0.695s
OK
Socket: in 1 tries, connected to 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55910), raddr=('127.0.0.1', 4240)> (1 sockets open)
Socket: closing 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55910), raddr=('127.0.0.1', 4240)> (0 sockets open)
Process returned code: 0
osmotestconfig.py -p /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.. -w /build/osmo-pcu-1.5.0.6-46529/_build/sub -v
Verifying src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build/osmo-pcu-1.5.0.6-46529/_build/sub 'src/osmo-pcu' '-c' '/build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg'
> ls -l /proc/49601/fd
total 0
lr-x------ 1 build build 64 Dec 10 07:30 0 -> pipe:[2247733680]
l-wx------ 1 build build 64 Dec 10 07:30 1 -> pipe:[2247733681]
l-wx------ 1 build build 64 Dec 10 07:30 2 -> pipe:[2247733682]
l-wx------ 1 build build 64 Dec 10 07:30 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4240 0.0.0.0:*
> ps xua | grep osmo
build 38936 0.0 0.0 3924 3000 ? S 07:30 0:00 /bin/bash -c test -d osmo-pcu-1.5.0.6-46529/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-pcu-1.5.0.6-46529.tar.gz osmo-pcu-1.5.0.6-46529.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 44719 0.0 0.0 3924 3028 ? S 07:30 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-pcu-1.5.0.6-46529/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc tests contrib' ;; \ *) list='include src doc tests contrib' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 49601 56.2 0.0 27996 23200 ? S 07:30 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.. -w /build/osmo-pcu-1.5.0.6-46529/_build/sub -v
build 49602 0.0 0.0 17048 9016 ? S 07:30 0:00 src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/../../doc/examples/osmo-pcu.cfg
build 49609 0.0 0.0 2576 940 ? S 07:30 0:00 /bin/sh -c ps xua | grep osmo
build 49611 0.0 0.0 3700 1860 ? S 07:30 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55932), raddr=('127.0.0.1', 4240)> (1 sockets open)
Process returned code: 0
Socket: closing 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55932), raddr=('127.0.0.1', 4240)> (0 sockets open)
Verifying src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/writtenconfig/osmo-pcu.cfgh26fhapm, test write_config
Launching: PWD=/build/osmo-pcu-1.5.0.6-46529/_build/sub 'src/osmo-pcu' '-c' '/build/osmo-pcu-1.5.0.6-46529/_build/sub/writtenconfig/osmo-pcu.cfgh26fhapm'
> ls -l /proc/49601/fd
total 0
lr-x------ 1 build build 64 Dec 10 07:30 0 -> pipe:[2247733680]
l-wx------ 1 build build 64 Dec 10 07:30 1 -> pipe:[2247733681]
l-wx------ 1 build build 64 Dec 10 07:30 2 -> pipe:[2247733682]
l-wx------ 1 build build 64 Dec 10 07:30 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4240 0.0.0.0:*
> ps xua | grep osmo
build 38936 0.0 0.0 3924 3000 ? S 07:30 0:00 /bin/bash -c test -d osmo-pcu-1.5.0.6-46529/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-pcu-1.5.0.6-46529.tar.gz osmo-pcu-1.5.0.6-46529.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 44719 0.0 0.0 3924 3028 ? S 07:30 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-pcu-1.5.0.6-46529/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc tests contrib' ;; \ *) list='include src doc tests contrib' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 49601 25.6 0.0 28288 23848 ? S 07:30 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.. -w /build/osmo-pcu-1.5.0.6-46529/_build/sub -v
build 49612 0.0 0.0 17048 8932 ? S 07:30 0:00 src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/writtenconfig/osmo-pcu.cfgh26fhapm
build 49619 0.0 0.0 2576 896 ? S 07:30 0:00 /bin/sh -c ps xua | grep osmo
build 49621 0.0 0.0 3700 1860 ? S 07:30 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55946), raddr=('127.0.0.1', 4240)> (1 sockets open)
Process returned code: 0
Socket: closing 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55946), raddr=('127.0.0.1', 4240)> (0 sockets open)
Verifying src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/writtenconfig/osmo-pcu.cfgh26fhapm, test token_vty_command
Launching: PWD=/build/osmo-pcu-1.5.0.6-46529/_build/sub 'src/osmo-pcu' '-c' '/build/osmo-pcu-1.5.0.6-46529/_build/sub/writtenconfig/osmo-pcu.cfgh26fhapm'
> ls -l /proc/49601/fd
total 0
lr-x------ 1 build build 64 Dec 10 07:30 0 -> pipe:[2247733680]
l-wx------ 1 build build 64 Dec 10 07:30 1 -> pipe:[2247733681]
l-wx------ 1 build build 64 Dec 10 07:30 2 -> pipe:[2247733682]
l-wx------ 1 build build 64 Dec 10 07:30 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4240 0.0.0.0:*
> ps xua | grep osmo
build 38936 0.0 0.0 3924 3000 ? S 07:30 0:00 /bin/bash -c test -d osmo-pcu-1.5.0.6-46529/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-pcu-1.5.0.6-46529/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-lc15bts-phy --with-litecell15=/build/deps/layer1-headers/inc --enable-vty-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-pcu-1.5.0.6-46529.tar.gz osmo-pcu-1.5.0.6-46529.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 44719 0.0 0.0 3924 3028 ? S 07:30 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-pcu-1.5.0.6-46529/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc tests contrib' ;; \ *) list='include src doc tests contrib' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 49601 16.1 0.0 28288 23848 ? S 07:30 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-pcu-1.5.0.6-46529/_build/sub/../.. -w /build/osmo-pcu-1.5.0.6-46529/_build/sub -v
build 49622 0.0 0.0 17048 8860 ? S 07:30 0:00 src/osmo-pcu -c /build/osmo-pcu-1.5.0.6-46529/_build/sub/writtenconfig/osmo-pcu.cfgh26fhapm
build 49629 0.0 0.0 2576 900 ? S 07:30 0:00 /bin/sh -c ps xua | grep osmo
build 49631 0.0 0.0 3700 1868 ? S 07:30 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55976), raddr=('127.0.0.1', 4240)> (1 sockets open)
Process returned code: 0
Socket: closing 127.0.0.1:4240 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 55976), raddr=('127.0.0.1', 4240)> (0 sockets open)
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making check in contrib
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/osmo-pcu-1.5.0.6-46529/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-pcu '/build/osmo-pcu-1.5.0.6-46529/_inst/bin'
libtool: install: /usr/bin/install -c osmo-pcu /build/osmo-pcu-1.5.0.6-46529/_inst/bin/osmo-pcu
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-pcu-1.5.0.6-46529/_inst/share/doc/osmo-pcu/examples/osmo-pcu'
/usr/bin/mkdir -p '/build/osmo-pcu-1.5.0.6-46529/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/build/osmo-pcu-1.5.0.6-46529/_inst/share/doc/osmo-pcu/examples/osmo-pcu'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/build/osmo-pcu-1.5.0.6-46529/_inst/etc/osmocom'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making install in tests
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making install in contrib
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/osmo-pcu-1.5.0.6-46529/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-pcu.service '/build/osmo-pcu-1.5.0.6-46529/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making installcheck in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making installcheck in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[2]: Nothing to be done for 'installcheck'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making installcheck in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making installcheck in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making installcheck in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making installcheck in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
/bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-pcu-1.5.0.6-46529/_inst/bin' \
## ---------------------------------- ##
## osmo-pcu 1.5.0.6-46529 test suite. ##
## ---------------------------------- ##
Regression tests
1: rlcmac ok
2: multi_slot ok
3: ts_alloc ok
4: tbf ok
5: bitcomp ok
6: edge ok
7: types ok
8: ms ok
9: llc ok
10: llist ok
11: codel ok
12: fn ok
13: app_info ok
14: ulc ok
## ------------- ##
## Test results. ##
## ------------- ##
All 14 tests were successful.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making installcheck in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making installcheck in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'installcheck'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Nothing to be done for 'installcheck-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[2]: Nothing to be done for 'installcheck-am'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
( cd '/build/osmo-pcu-1.5.0.6-46529/_inst/bin' && rm -f osmo-pcu )
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
( cd '/build/osmo-pcu-1.5.0.6-46529/_inst/share/doc/osmo-pcu/examples/osmo-pcu' && rm -f osmo-pcu.cfg )
( cd '/build/osmo-pcu-1.5.0.6-46529/_inst/etc/osmocom' && rm -f osmo-pcu.cfg )
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
( cd '/build/osmo-pcu-1.5.0.6-46529/_inst//lib/systemd/system' && rm -f osmo-pcu.service )
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make install-recursive
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making install in include
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making install in src
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-pcu '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/bin'
libtool: install: /usr/bin/install -c osmo-pcu /tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/bin/osmo-pcu
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making install in doc
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making install in examples
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/share/doc/osmo-pcu/examples/osmo-pcu'
/usr/bin/mkdir -p '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/etc/osmocom'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/share/doc/osmo-pcu/examples/osmo-pcu'
/usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/etc/osmocom'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making install in manuals
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making install in tests
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making install in contrib
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making install in systemd
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst//lib/systemd/system'
/usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-pcu.service '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst//lib/systemd/system'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making uninstall in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making uninstall in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
( cd '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/bin' && rm -f osmo-pcu )
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making uninstall in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making uninstall in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
( cd '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/share/doc/osmo-pcu/examples/osmo-pcu' && rm -f osmo-pcu.cfg )
( cd '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst/etc/osmocom' && rm -f osmo-pcu.cfg )
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making uninstall in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'uninstall'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making uninstall in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[2]: Nothing to be done for 'uninstall'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making uninstall in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making uninstall in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
( cd '/tmp/am-dc-38936//build/osmo-pcu-1.5.0.6-46529/_inst//lib/systemd/system' && rm -f osmo-pcu.service )
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[3]: Nothing to be done for 'uninstall-am'.
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[2]: Nothing to be done for 'uninstall-am'.
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make distdir-am
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
if test -d "osmo-pcu-1.5.0.6-46529"; then find "osmo-pcu-1.5.0.6-46529" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.6-46529" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.6-46529"; }; else :; fi
test -d "osmo-pcu-1.5.0.6-46529" || mkdir "osmo-pcu-1.5.0.6-46529"
(cd include && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
(cd src && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
(cd doc && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
(cd examples && make top_distdir=../../osmo-pcu-1.5.0.6-46529 distdir=../../osmo-pcu-1.5.0.6-46529/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make distdir-am
make[7]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[7]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
make[6]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
(cd manuals && make top_distdir=../../osmo-pcu-1.5.0.6-46529 distdir=../../osmo-pcu-1.5.0.6-46529/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make distdir-am
make[7]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[7]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[6]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
(cd tests && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
(cd contrib && make top_distdir=../osmo-pcu-1.5.0.6-46529 distdir=../osmo-pcu-1.5.0.6-46529/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make distdir-am
make[5]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
(cd systemd && make top_distdir=../../osmo-pcu-1.5.0.6-46529 distdir=../../osmo-pcu-1.5.0.6-46529/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[6]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make distdir-am
make[7]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[7]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[6]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[5]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make \
top_distdir="osmo-pcu-1.5.0.6-46529" distdir="osmo-pcu-1.5.0.6-46529" \
dist-hook
make[4]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
echo 1.5.0.6-46529 > osmo-pcu-1.5.0.6-46529/.tarball-version
make[4]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
test -n "" \
|| find "osmo-pcu-1.5.0.6-46529" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/osmo-pcu-1.5.0.6-46529/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-pcu-1.5.0.6-46529"
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
tardir=osmo-pcu-1.5.0.6-46529 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-pcu-1.5.0.6-46529.tar.bz2
tardir=osmo-pcu-1.5.0.6-46529 && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-pcu-1.5.0.6-46529.tar.gz
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
if test -d "osmo-pcu-1.5.0.6-46529"; then find "osmo-pcu-1.5.0.6-46529" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.6-46529" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.6-46529"; }; else :; fi
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
make[1]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
Making distclean in include
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../include" || test -z "" || rm -f
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/include'
Making distclean in src
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
rm -rf .libs _libs
test -z "libgprs.la" || rm -f libgprs.la
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-pcu
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../src" || test -z "" || rm -f
rm -f ericsson-rbs/*.o
rm -f ericsson-rbs/.deps/.dirstamp
rm -f osmo-bts-litecell15/*.o
rm -f ./so_locations
rm -f ericsson-rbs/.dirstamp
rm -f osmo-bts-oc2g/*.o
rm -f osmo-bts-litecell15/.deps/.dirstamp
rm -f osmo-bts-litecell15/.dirstamp
rm -f osmo-bts-sysmo/*.o
rm -f osmo-bts-oc2g/.deps/.dirstamp
rm -f osmo-bts-oc2g/.dirstamp
rm -f osmo-bts-sysmo/.deps/.dirstamp
rm -f osmo-bts-sysmo/.dirstamp
rm -f ./.deps/alloc_algo.Plo
rm -f ./.deps/bts.Plo
rm -f ./.deps/bts_pch_timer.Plo
rm -f ./.deps/coding_scheme.Plo
rm -f ./.deps/csn1.Plo
rm -f ./.deps/csn1_dec.Plo
rm -f ./.deps/csn1_enc.Plo
rm -f ./.deps/decoding.Plo
rm -f ./.deps/egprs_rlc_compression.Plo
rm -f ./.deps/encoding.Plo
rm -f ./.deps/gprs_bssgp_pcu.Plo
rm -f ./.deps/gprs_bssgp_rim.Plo
rm -f ./.deps/gprs_codel.Plo
rm -f ./.deps/gprs_debug.Plo
rm -f ./.deps/gprs_ms.Plo
rm -f ./.deps/gprs_pcu.Plo
rm -f ./.deps/gprs_rlcmac.Plo
rm -f ./.deps/gprs_rlcmac_meas.Plo
rm -f ./.deps/gprs_rlcmac_sched.Plo
rm -f ./.deps/gsm_rlcmac.Plo
rm -f ./.deps/llc.Plo
rm -f ./.deps/mslot_class.Plo
rm -f ./.deps/nacc_fsm.Plo
rm -f ./.deps/neigh_cache.Plo
rm -f ./.deps/pcu_l1_if.Plo
rm -f ./.deps/pcu_main.Po
rm -f ./.deps/pcu_vty.Plo
rm -f ./.deps/pcu_vty_functions.Plo
rm -f ./.deps/pcuif_sock.Plo
rm -f ./.deps/pdch.Plo
rm -f ./.deps/pdch_ul_controller.Plo
rm -f ./.deps/rlc.Plo
rm -f ./.deps/rlc_window.Plo
rm -f ./.deps/rlc_window_dl.Plo
rm -f ./.deps/rlc_window_ul.Plo
rm -f ./.deps/sba.Plo
rm -f ./.deps/tbf.Plo
rm -f ./.deps/tbf_dl.Plo
rm -f ./.deps/tbf_dl_ass_fsm.Plo
rm -f ./.deps/tbf_dl_fsm.Plo
rm -f ./.deps/tbf_fsm.Plo
rm -f ./.deps/tbf_ul.Plo
rm -f ./.deps/tbf_ul_ack_fsm.Plo
rm -f ./.deps/tbf_ul_ass_fsm.Plo
rm -f ./.deps/tbf_ul_fsm.Plo
rm -f ericsson-rbs/.deps/er_ccu_if.Po
rm -f ericsson-rbs/.deps/er_ccu_l1_if.Po
rm -f osmo-bts-litecell15/.deps/lc15_l1_hw.Po
rm -f osmo-bts-litecell15/.deps/lc15_l1_if.Po
rm -f osmo-bts-litecell15/.deps/lc15bts.Po
rm -f osmo-bts-oc2g/.deps/oc2g_l1_hw.Po
rm -f osmo-bts-oc2g/.deps/oc2g_l1_if.Po
rm -f osmo-bts-oc2g/.deps/oc2gbts.Po
rm -f osmo-bts-sysmo/.deps/femtobts.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_fwd.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_hw.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_if.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/src'
Making distclean in doc
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making distclean in examples
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/examples" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/examples'
Making distclean in manuals
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../doc/manuals" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../doc" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/doc'
Making distclean in tests
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
rm -rf .libs _libs
test ! -f '../../../tests/testsuite' || \
/bin/bash '../../../tests/testsuite' --clean
rm -f *.o
rm -f *.lo
rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest
rm -f *.tab.c
test -z "" || rm -f
rm -f emu/pcu_emu
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf alloc/.libs alloc/_libs
test . = "../../../tests" || test -z "" || rm -f
rm -rf app_info/.libs app_info/_libs
rm -f alloc/.dirstamp
rm -rf bitcomp/.libs bitcomp/_libs
rm -f app_info/.dirstamp
rm -f bitcomp/.dirstamp
rm -rf codel/.libs codel/_libs
rm -f codel/.dirstamp
rm -rf edge/.libs edge/_libs
rm -f edge/.dirstamp
rm -f emu/.dirstamp
rm -rf emu/.libs emu/_libs
rm -f fn/.dirstamp
rm -rf fn/.libs fn/_libs
rm -f llc/.dirstamp
rm -f llist/.dirstamp
rm -rf llc/.libs llc/_libs
rm -f ms/.dirstamp
rm -rf llist/.libs llist/_libs
rm -f rlcmac/.dirstamp
rm -rf ms/.libs ms/_libs
rm -f tbf/.dirstamp
rm -rf rlcmac/.libs rlcmac/_libs
rm -f types/.dirstamp
rm -rf tbf/.libs tbf/_libs
rm -f ulc/.dirstamp
rm -rf types/.libs types/_libs
test -z "atconfig" || rm -f atconfig
rm -rf ulc/.libs ulc/_libs
rm -f ./.deps/AllocTest.Po
rm -f ./.deps/AppInfoTest.Po
rm -f ./.deps/BitcompTest.Po
rm -f ./.deps/EdgeTest.Po
rm -f ./.deps/FnTest.Po
rm -f ./.deps/LListTest.Po
rm -f ./.deps/LlcTest.Po
rm -f ./.deps/MsTest.Po
rm -f ./.deps/MslotTest.Po
rm -f ./.deps/PdchUlcTest.Po
rm -f ./.deps/RLCMACTest.Po
rm -f ./.deps/TbfTest.Po
rm -f ./.deps/TypesTest.Po
rm -f ./.deps/codel_test.Po
rm -f ./.deps/egprs_rlc_compression.Po
rm -f ./.deps/openbsc_clone.Po
rm -f ./.deps/pcu_emu.Po
rm -f ./.deps/test_pdp_activation.Po
rm -f ./.deps/test_replay_gprs_attach.Po
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/tests'
Making distclean in contrib
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
Making distclean in systemd
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "../../../../contrib/systemd" || test -z "" || rm -f
rm -f Makefile
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../../../contrib" || test -z "" || rm -f
make[3]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
rm -f Makefile
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub/contrib'
make[2]: Entering directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "../.." || test -z "" || rm -f
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
make[2]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -f Makefile
make[1]: Leaving directory '/build/osmo-pcu-1.5.0.6-46529/_build/sub'
if test -d "osmo-pcu-1.5.0.6-46529"; then find "osmo-pcu-1.5.0.6-46529" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.6-46529" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.6-46529"; }; else :; fi
========================================================
osmo-pcu-1.5.0.6-46529 archives ready for distribution:
osmo-pcu-1.5.0.6-46529.tar.gz
osmo-pcu-1.5.0.6-46529.tar.bz2
========================================================
+ [ 0 = 1 ]
+ make -j 8 maintainer-clean
Making maintainer-clean in include
make[1]: Entering directory '/build/include'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[1]: Leaving directory '/build/include'
Making maintainer-clean in src
make[1]: Entering directory '/build/src'
rm -rf .libs _libs
test -z "libgprs.la" || rm -f libgprs.la
rm -f *.o
rm -f *.lo
rm -f *.tab.c
rm -f osmo-pcu
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
rm -f ericsson-rbs/.deps/.dirstamp
rm -f ericsson-rbs/*.o
it deletes files that may require special tools to rebuild.
rm -f ./so_locations
rm -f ericsson-rbs/.dirstamp
rm -f osmo-bts-litecell15/*.o
rm -f osmo-bts-litecell15/.deps/.dirstamp
rm -f osmo-bts-oc2g/*.o
rm -f osmo-bts-litecell15/.dirstamp
rm -f osmo-bts-sysmo/*.o
rm -f osmo-bts-oc2g/.deps/.dirstamp
rm -f osmo-bts-oc2g/.dirstamp
rm -f osmo-bts-sysmo/.deps/.dirstamp
rm -f osmo-bts-sysmo/.dirstamp
rm -f ./.deps/alloc_algo.Plo
rm -f ./.deps/bts.Plo
rm -f ./.deps/bts_pch_timer.Plo
rm -f ./.deps/coding_scheme.Plo
rm -f ./.deps/csn1.Plo
rm -f ./.deps/csn1_dec.Plo
rm -f ./.deps/csn1_enc.Plo
rm -f ./.deps/decoding.Plo
rm -f ./.deps/egprs_rlc_compression.Plo
rm -f ./.deps/encoding.Plo
rm -f ./.deps/gprs_bssgp_pcu.Plo
rm -f ./.deps/gprs_bssgp_rim.Plo
rm -f ./.deps/gprs_codel.Plo
rm -f ./.deps/gprs_debug.Plo
rm -f ./.deps/gprs_ms.Plo
rm -f ./.deps/gprs_pcu.Plo
rm -f ./.deps/gprs_rlcmac.Plo
rm -f ./.deps/gprs_rlcmac_meas.Plo
rm -f ./.deps/gprs_rlcmac_sched.Plo
rm -f ./.deps/gsm_rlcmac.Plo
rm -f ./.deps/llc.Plo
rm -f ./.deps/mslot_class.Plo
rm -f ./.deps/nacc_fsm.Plo
rm -f ./.deps/neigh_cache.Plo
rm -f ./.deps/pcu_l1_if.Plo
rm -f ./.deps/pcu_main.Po
rm -f ./.deps/pcu_vty.Plo
rm -f ./.deps/pcu_vty_functions.Plo
rm -f ./.deps/pcuif_sock.Plo
rm -f ./.deps/pdch.Plo
rm -f ./.deps/pdch_ul_controller.Plo
rm -f ./.deps/rlc.Plo
rm -f ./.deps/rlc_window.Plo
rm -f ./.deps/rlc_window_dl.Plo
rm -f ./.deps/rlc_window_ul.Plo
rm -f ./.deps/sba.Plo
rm -f ./.deps/tbf.Plo
rm -f ./.deps/tbf_dl.Plo
rm -f ./.deps/tbf_dl_ass_fsm.Plo
rm -f ./.deps/tbf_dl_fsm.Plo
rm -f ./.deps/tbf_fsm.Plo
rm -f ./.deps/tbf_ul.Plo
rm -f ./.deps/tbf_ul_ack_fsm.Plo
rm -f ./.deps/tbf_ul_ass_fsm.Plo
rm -f ./.deps/tbf_ul_fsm.Plo
rm -f ericsson-rbs/.deps/er_ccu_if.Po
rm -f ericsson-rbs/.deps/er_ccu_l1_if.Po
rm -f osmo-bts-litecell15/.deps/lc15_l1_hw.Po
rm -f osmo-bts-litecell15/.deps/lc15_l1_if.Po
rm -f osmo-bts-litecell15/.deps/lc15bts.Po
rm -f osmo-bts-oc2g/.deps/oc2g_l1_hw.Po
rm -f osmo-bts-oc2g/.deps/oc2g_l1_if.Po
rm -f osmo-bts-oc2g/.deps/oc2gbts.Po
rm -f osmo-bts-sysmo/.deps/femtobts.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_fwd.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_hw.Po
rm -f osmo-bts-sysmo/.deps/sysmo_l1_if.Po
rm -f Makefile
make[1]: Leaving directory '/build/src'
Making maintainer-clean in doc
make[1]: Entering directory '/build/doc'
Making maintainer-clean in examples
make[2]: Entering directory '/build/doc/examples'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/examples'
Making maintainer-clean in manuals
make[2]: Entering directory '/build/doc/manuals'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/doc/manuals'
make[2]: Entering directory '/build/doc'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
This command is intended for maintainers to use
test . = "." || test -z "" || rm -f
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/doc'
rm -f Makefile
make[1]: Leaving directory '/build/doc'
Making maintainer-clean in tests
make[1]: Entering directory '/build/tests'
rm -rf .libs _libs
test ! -f './testsuite' || \
/bin/bash './testsuite' --clean
rm -f *.o
rm -f *.lo
rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest
rm -f *.tab.c
test -z "" || rm -f
rm -f emu/pcu_emu
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
rm -rf alloc/.libs alloc/_libs
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
rm -rf app_info/.libs app_info/_libs
rm -f alloc/.dirstamp
it deletes files that may require special tools to rebuild.
rm -rf bitcomp/.libs bitcomp/_libs
rm -f app_info/.dirstamp
rm -rf codel/.libs codel/_libs
rm -f bitcomp/.dirstamp
rm -rf edge/.libs edge/_libs
rm -f codel/.dirstamp
rm -rf emu/.libs emu/_libs
rm -f edge/.dirstamp
rm -rf fn/.libs fn/_libs
rm -f emu/.dirstamp
rm -rf llc/.libs llc/_libs
rm -f fn/.dirstamp
rm -rf llist/.libs llist/_libs
rm -f llc/.dirstamp
rm -rf ms/.libs ms/_libs
rm -f llist/.dirstamp
rm -f ms/.dirstamp
rm -rf rlcmac/.libs rlcmac/_libs
rm -f rlcmac/.dirstamp
rm -rf tbf/.libs tbf/_libs
rm -f tbf/.dirstamp
rm -rf types/.libs types/_libs
rm -f types/.dirstamp
rm -rf ulc/.libs ulc/_libs
rm -f ulc/.dirstamp
test -z "atconfig" || rm -f atconfig
rm -f ./.deps/AllocTest.Po
rm -f ./.deps/AppInfoTest.Po
rm -f ./.deps/BitcompTest.Po
rm -f ./.deps/EdgeTest.Po
rm -f ./.deps/FnTest.Po
rm -f ./.deps/LListTest.Po
rm -f ./.deps/LlcTest.Po
rm -f ./.deps/MsTest.Po
rm -f ./.deps/MslotTest.Po
rm -f ./.deps/PdchUlcTest.Po
rm -f ./.deps/RLCMACTest.Po
rm -f ./.deps/TbfTest.Po
rm -f ./.deps/TypesTest.Po
rm -f ./.deps/codel_test.Po
rm -f ./.deps/egprs_rlc_compression.Po
rm -f ./.deps/openbsc_clone.Po
rm -f ./.deps/pcu_emu.Po
rm -f ./.deps/test_pdp_activation.Po
rm -f ./.deps/test_replay_gprs_attach.Po
rm -f Makefile
make[1]: Leaving directory '/build/tests'
Making maintainer-clean in contrib
make[1]: Entering directory '/build/contrib'
Making maintainer-clean in systemd
make[2]: Entering directory '/build/contrib/systemd'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
rm -f Makefile
make[2]: Leaving directory '/build/contrib/systemd'
make[2]: Entering directory '/build/contrib'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
it deletes files that may require special tools to rebuild.
make[2]: Leaving directory '/build/contrib'
rm -f Makefile
make[1]: Leaving directory '/build/contrib'
make[1]: Entering directory '/build'
rm -rf .libs _libs
rm -f *.lo
test -z "" || rm -f
rm -f libtool config.lt
rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
test . = "." || test -z "" || rm -f
This command is intended for maintainers to use
rm -f cscope.out cscope.in.out cscope.po.out cscope.files
it deletes files that may require special tools to rebuild.
test -z "./.version" || rm -f ./.version
make[1]: Leaving directory '/build'
rm -f config.status config.cache config.log configure.lineno config.status.lineno
rm -rf ./autom4te.cache
rm -f Makefile
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
Removing Makefile.in
Removing aclocal.m4
Removing compile
Removing config.guess
Removing config.sub
Removing configure
Removing contrib/Makefile.in
Removing contrib/systemd/Makefile.in
Removing depcomp
Skipping repository deps/libosmo-abis
Skipping repository deps/libosmocore
Skipping repository deps/layer1-headers
Skipping repository deps/libosmo-netif
Removing deps/install
Removing doc/Makefile.in
Removing doc/examples/Makefile.in
Removing doc/manuals/Makefile.in
Removing include/Makefile.in
Removing install-sh
Removing ltmain.sh
Removing missing
Removing osmo-pcu-1.5.0.6-46529.tar.bz2
Removing osmo-pcu-1.5.0.6-46529.tar.gz
Removing src/.deps/
Removing src/Makefile.in
Removing src/ericsson-rbs/.deps/
Removing src/osmo-bts-litecell15/.deps/
Removing src/osmo-bts-oc2g/.deps/
Removing src/osmo-bts-sysmo/.deps/
Removing tests/.deps/
Removing tests/Makefile.in
Removing tests/package.m4
Removing tests/testsuite
+ [ -d /build/deps ]
+ git_clean /build/deps/layer1-headers
+ repos=/build/deps/layer1-headers
+ [ ! -d /build/deps/layer1-headers ]
+ [ ! -d /build/deps/layer1-headers/.git ]
+ git -C /build/deps/layer1-headers checkout -f HEAD
+ git -C /build/deps/layer1-headers clean -dxf
+ git_clean /build/deps/libosmo-abis
+ repos=/build/deps/libosmo-abis
+ [ ! -d /build/deps/libosmo-abis ]
+ [ ! -d /build/deps/libosmo-abis/.git ]
+ git -C /build/deps/libosmo-abis checkout -f HEAD
+ git -C /build/deps/libosmo-abis clean -dxf
Removing .version
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing doc/Makefile
Removing doc/Makefile.in
Removing doc/examples/.libs/
Removing doc/examples/Makefile
Removing doc/examples/Makefile.in
Removing doc/examples/lapd-over-datagram-network
Removing doc/examples/lapd-over-datagram-user
Removing doc/examples/lapd-over-datagram/.deps/
Removing doc/examples/lapd-over-datagram/.dirstamp
Removing doc/examples/lapd-over-datagram/lapd-over-datagram-network.o
Removing doc/examples/lapd-over-datagram/lapd-over-datagram-user.o
Removing include/Makefile
Removing include/Makefile.in
Removing install-sh
Removing libosmoabis.pc
Removing libosmotrau.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/e1_input.lo
Removing src/e1_input.o
Removing src/e1_input_vty.lo
Removing src/e1_input_vty.o
Removing src/init.lo
Removing src/init.o
Removing src/input/.deps/
Removing src/input/.dirstamp
Removing src/input/.libs/
Removing src/input/e1d.lo
Removing src/input/e1d.o
Removing src/input/ipa.lo
Removing src/input/ipa.o
Removing src/input/ipa_keepalive.lo
Removing src/input/ipa_keepalive.o
Removing src/input/ipaccess.lo
Removing src/input/ipaccess.o
Removing src/input/lapd.lo
Removing src/input/lapd.o
Removing src/input/lapd_pcap.lo
Removing src/input/lapd_pcap.o
Removing src/input/misdn.lo
Removing src/input/misdn.o
Removing src/input/rs232.lo
Removing src/input/rs232.o
Removing src/input/unixsocket.lo
Removing src/input/unixsocket.o
Removing src/ipa_proxy.lo
Removing src/ipa_proxy.o
Removing src/libosmoabis.la
Removing src/libosmotrau.la
Removing src/subchan_demux.lo
Removing src/subchan_demux.o
Removing src/trau/.deps/
Removing src/trau/.dirstamp
Removing src/trau/.libs/
Removing src/trau/libosmotrau_la-csd_ra2.lo
Removing src/trau/libosmotrau_la-csd_ra2.o
Removing src/trau/libosmotrau_la-osmo_ortp.lo
Removing src/trau/libosmotrau_la-osmo_ortp.o
Removing src/trau/libosmotrau_la-raa_prime_decode.lo
Removing src/trau/libosmotrau_la-raa_prime_decode.o
Removing src/trau/libosmotrau_la-raa_prime_encode.lo
Removing src/trau/libosmotrau_la-raa_prime_encode.o
Removing src/trau/libosmotrau_la-trau_frame.lo
Removing src/trau/libosmotrau_la-trau_frame.o
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.lo
Removing src/trau/libosmotrau_la-trau_pcu_ericsson.o
Removing src/trau/libosmotrau_la-trau_rtp_conv.lo
Removing src/trau/libosmotrau_la-trau_rtp_conv.o
Removing src/trau/libosmotrau_la-trau_sync.lo
Removing src/trau/libosmotrau_la-trau_sync.o
Removing src/trau_frame.lo
Removing src/trau_frame.o
Removing stamp-h1
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/atconfig
Removing tests/ipa_recv/.deps/
Removing tests/raa_prime/.deps/
Removing tests/rtp_test/.deps/
Removing tests/subchan_demux/.deps/
Removing tests/trau_conv/.deps/
Removing tests/trau_pcu_ericsson/.deps/
Removing tests/trau_sync/.deps/
+ git_clean /build/deps/libosmo-netif
+ repos=/build/deps/libosmo-netif
+ [ ! -d /build/deps/libosmo-netif ]
+ [ ! -d /build/deps/libosmo-netif/.git ]
+ git -C /build/deps/libosmo-netif checkout -f HEAD
+ git -C /build/deps/libosmo-netif clean -dxf
Removing .version
Removing Doxyfile
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing depcomp
Removing examples/.deps/
Removing examples/.libs/
Removing examples/Makefile
Removing examples/Makefile.in
Removing examples/ipa-stream-client
Removing examples/ipa-stream-client.o
Removing examples/ipa-stream-server
Removing examples/ipa-stream-server.o
Removing examples/osmux-test-input
Removing examples/osmux-test-input.o
Removing examples/osmux-test-output
Removing examples/osmux-test-output.o
Removing examples/rs232-read
Removing examples/rs232-read.o
Removing examples/rs232-write
Removing examples/rs232-write.o
Removing examples/rtp-udp-test-client
Removing examples/rtp-udp-test-client.o
Removing examples/rtp-udp-test-server
Removing examples/rtp-udp-test-server.o
Removing examples/stream-client
Removing examples/stream-client.o
Removing examples/stream-server
Removing examples/stream-server.o
Removing examples/udp-test-client
Removing examples/udp-test-client.o
Removing examples/udp-test-server
Removing examples/udp-test-server.o
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/netif/Makefile
Removing include/osmocom/netif/Makefile.in
Removing install-sh
Removing libosmo-netif.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/.deps/
Removing src/.libs/
Removing src/Makefile
Removing src/Makefile.in
Removing src/amr.lo
Removing src/amr.o
Removing src/datagram.lo
Removing src/datagram.o
Removing src/ipa.lo
Removing src/ipa.o
Removing src/ipa_keepalive.lo
Removing src/ipa_keepalive.o
Removing src/ipa_unit.lo
Removing src/ipa_unit.o
Removing src/jibuf.lo
Removing src/jibuf.o
Removing src/libosmonetif.la
Removing src/osmux.lo
Removing src/osmux.o
Removing src/osmux_input.lo
Removing src/osmux_input.o
Removing src/osmux_output.lo
Removing src/osmux_output.o
Removing src/prim.lo
Removing src/prim.o
Removing src/rs232.lo
Removing src/rs232.o
Removing src/rtp.lo
Removing src/rtp.o
Removing src/sctp.lo
Removing src/sctp.o
Removing src/stream.lo
Removing src/stream.o
Removing src/stream_cli.lo
Removing src/stream_cli.o
Removing src/stream_srv.lo
Removing src/stream_srv.o
Removing stamp-h1
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/amr/.deps/
Removing tests/atconfig
Removing tests/jibuf/.deps/
Removing tests/osmo-pcap-test/.deps/
Removing tests/osmux/.deps/
Removing tests/stream/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/osmo-amr-inspect
Removing utils/osmo-amr-inspect.o
+ git_clean /build/deps/libosmocore
+ repos=/build/deps/libosmocore
+ [ ! -d /build/deps/libosmocore ]
+ [ ! -d /build/deps/libosmocore/.git ]
+ git -C /build/deps/libosmocore checkout -f HEAD
+ git -C /build/deps/libosmocore clean -dxf
Removing .version
Removing Doxyfile.codec
Removing Doxyfile.coding
Removing Doxyfile.ctrl
Removing Doxyfile.gb
Removing Doxyfile.gsm
Removing Doxyfile.isdn
Removing Doxyfile.sim
Removing Doxyfile.usb
Removing Doxyfile.vty
Removing Makefile
Removing Makefile.in
Removing aclocal.m4
Removing autom4te.cache/
Removing compile
Removing config.guess
Removing config.h
Removing config.h.in
Removing config.log
Removing config.status
Removing config.sub
Removing configure
Removing contrib/libosmocore.spec
Removing depcomp
Removing include/Makefile
Removing include/Makefile.in
Removing include/osmocom/Makefile
Removing include/osmocom/Makefile.in
Removing include/osmocom/codec/Makefile
Removing include/osmocom/codec/Makefile.in
Removing include/osmocom/coding/Makefile
Removing include/osmocom/coding/Makefile.in
Removing include/osmocom/core/Makefile
Removing include/osmocom/core/Makefile.in
Removing include/osmocom/core/bit16gen.h
Removing include/osmocom/core/bit32gen.h
Removing include/osmocom/core/bit64gen.h
Removing include/osmocom/core/crc16gen.h
Removing include/osmocom/core/crc32gen.h
Removing include/osmocom/core/crc64gen.h
Removing include/osmocom/core/crc8gen.h
Removing include/osmocom/core/socket_compat.h
Removing include/osmocom/crypt/Makefile
Removing include/osmocom/crypt/Makefile.in
Removing include/osmocom/ctrl/Makefile
Removing include/osmocom/ctrl/Makefile.in
Removing include/osmocom/gprs/Makefile
Removing include/osmocom/gprs/Makefile.in
Removing include/osmocom/gprs/protocol/Makefile
Removing include/osmocom/gprs/protocol/Makefile.in
Removing include/osmocom/gsm/Makefile
Removing include/osmocom/gsm/Makefile.in
Removing include/osmocom/gsm/gsm0503.h
Removing include/osmocom/gsm/protocol/Makefile
Removing include/osmocom/gsm/protocol/Makefile.in
Removing include/osmocom/isdn/Makefile
Removing include/osmocom/isdn/Makefile.in
Removing include/osmocom/sim/Makefile
Removing include/osmocom/sim/Makefile.in
Removing include/osmocom/usb/Makefile
Removing include/osmocom/usb/Makefile.in
Removing include/osmocom/vty/Makefile
Removing include/osmocom/vty/Makefile.in
Removing install-sh
Removing libosmocodec.pc
Removing libosmocoding.pc
Removing libosmocore.pc
Removing libosmoctrl.pc
Removing libosmogb.pc
Removing libosmogsm.pc
Removing libosmoisdn.pc
Removing libosmosim.pc
Removing libosmousb.pc
Removing libosmovty.pc
Removing libtool
Removing ltmain.sh
Removing m4/libtool.m4
Removing m4/ltoptions.m4
Removing m4/ltsugar.m4
Removing m4/ltversion.m4
Removing m4/lt~obsolete.m4
Removing missing
Removing src/Makefile
Removing src/Makefile.in
Removing src/codec/.deps/
Removing src/codec/.libs/
Removing src/codec/Makefile
Removing src/codec/Makefile.in
Removing src/codec/ecu.lo
Removing src/codec/ecu_fr.lo
Removing src/codec/ecu_fr_old.lo
Removing src/codec/gsm610.lo
Removing src/codec/gsm620.lo
Removing src/codec/gsm660.lo
Removing src/codec/gsm690.lo
Removing src/codec/hr_sid_class.lo
Removing src/codec/libosmocodec.la
Removing src/coding/.deps/
Removing src/coding/.libs/
Removing src/coding/Makefile
Removing src/coding/Makefile.in
Removing src/coding/gsm0503_amr_dtx.lo
Removing src/coding/gsm0503_coding.lo
Removing src/coding/gsm0503_interleaving.lo
Removing src/coding/gsm0503_mapping.lo
Removing src/coding/gsm0503_parity.lo
Removing src/coding/gsm0503_tables.lo
Removing src/coding/libosmocoding.la
Removing src/core/.deps/
Removing src/core/.libs/
Removing src/core/Makefile
Removing src/core/Makefile.in
Removing src/core/application.lo
Removing src/core/backtrace.lo
Removing src/core/base64.lo
Removing src/core/bitcomp.lo
Removing src/core/bits.lo
Removing src/core/bitvec.lo
Removing src/core/context.lo
Removing src/core/conv.lo
Removing src/core/conv_acc.lo
Removing src/core/conv_acc_generic.lo
Removing src/core/conv_acc_sse.lo
Removing src/core/conv_acc_sse_avx.lo
Removing src/core/counter.lo
Removing src/core/crc16.lo
Removing src/core/crc16gen.c
Removing src/core/crc16gen.lo
Removing src/core/crc32gen.c
Removing src/core/crc32gen.lo
Removing src/core/crc64gen.c
Removing src/core/crc64gen.lo
Removing src/core/crc8gen.c
Removing src/core/crc8gen.lo
Removing src/core/exec.lo
Removing src/core/fsm.lo
Removing src/core/gsmtap_util.lo
Removing src/core/isdnhdlc.lo
Removing src/core/it_q.lo
Removing src/core/libosmocore.la
Removing src/core/logging.lo
Removing src/core/logging_gsmtap.lo
Removing src/core/logging_syslog.lo
Removing src/core/loggingrb.lo
Removing src/core/macaddr.lo
Removing src/core/mnl.lo
Removing src/core/msgb.lo
Removing src/core/msgfile.lo
Removing src/core/netdev.lo
Removing src/core/netns.lo
Removing src/core/osmo_io.lo
Removing src/core/osmo_io_poll.lo
Removing src/core/osmo_io_uring.lo
Removing src/core/panic.lo
Removing src/core/plugin.lo
Removing src/core/prbs.lo
Removing src/core/prim.lo
Removing src/core/rate_ctr.lo
Removing src/core/rbtree.lo
Removing src/core/select.lo
Removing src/core/sercomm.lo
Removing src/core/serial.lo
Removing src/core/signal.lo
Removing src/core/sockaddr_str.lo
Removing src/core/socket.lo
Removing src/core/soft_uart.lo
Removing src/core/stat_item.lo
Removing src/core/stats.lo
Removing src/core/stats_statsd.lo
Removing src/core/stats_tcp.lo
Removing src/core/strrb.lo
Removing src/core/tdef.lo
Removing src/core/thread.lo
Removing src/core/time_cc.lo
Removing src/core/timer.lo
Removing src/core/timer_clockgettime.lo
Removing src/core/timer_gettimeofday.lo
Removing src/core/tun.lo
Removing src/core/use_count.lo
Removing src/core/utils.lo
Removing src/core/write_queue.lo
Removing src/ctrl/.deps/
Removing src/ctrl/.libs/
Removing src/ctrl/Makefile
Removing src/ctrl/Makefile.in
Removing src/ctrl/control_cmd.lo
Removing src/ctrl/control_if.lo
Removing src/ctrl/control_vty.lo
Removing src/ctrl/fsm_ctrl_commands.lo
Removing src/ctrl/libosmoctrl.la
Removing src/gb/.deps/
Removing src/gb/.libs/
Removing src/gb/Makefile
Removing src/gb/Makefile.in
Removing src/gb/bssgp_bvc_fsm.lo
Removing src/gb/common_vty.lo
Removing src/gb/frame_relay.lo
Removing src/gb/gprs_bssgp.lo
Removing src/gb/gprs_bssgp2.lo
Removing src/gb/gprs_bssgp_bss.lo
Removing src/gb/gprs_bssgp_rim.lo
Removing src/gb/gprs_bssgp_util.lo
Removing src/gb/gprs_bssgp_vty.lo
Removing src/gb/gprs_ns.lo
Removing src/gb/gprs_ns2.lo
Removing src/gb/gprs_ns2_fr.lo
Removing src/gb/gprs_ns2_frgre.lo
Removing src/gb/gprs_ns2_message.lo
Removing src/gb/gprs_ns2_sns.lo
Removing src/gb/gprs_ns2_udp.lo
Removing src/gb/gprs_ns2_vc_fsm.lo
Removing src/gb/gprs_ns2_vty.lo
Removing src/gb/gprs_ns_frgre.lo
Removing src/gb/gprs_ns_sns.lo
Removing src/gb/gprs_ns_vty.lo
Removing src/gb/libosmogb-test.la
Removing src/gb/libosmogb.la
Removing src/gsm/.deps/
Removing src/gsm/.libs/
Removing src/gsm/Makefile
Removing src/gsm/Makefile.in
Removing src/gsm/a5.lo
Removing src/gsm/abis_nm.lo
Removing src/gsm/apn.lo
Removing src/gsm/auth_comp128v1.lo
Removing src/gsm/auth_comp128v23.lo
Removing src/gsm/auth_core.lo
Removing src/gsm/auth_milenage.lo
Removing src/gsm/auth_tuak.lo
Removing src/gsm/auth_xor.lo
Removing src/gsm/auth_xor_2g.lo
Removing src/gsm/bsslap.lo
Removing src/gsm/bssmap_le.lo
Removing src/gsm/bts_features.lo
Removing src/gsm/cbsp.lo
Removing src/gsm/comp128.lo
Removing src/gsm/comp128v23.lo
Removing src/gsm/gad.lo
Removing src/gsm/gan.lo
Removing src/gsm/gea.lo
Removing src/gsm/gprs_cipher_core.lo
Removing src/gsm/gprs_gea.lo
Removing src/gsm/gprs_rlc.lo
Removing src/gsm/gsm0341.lo
Removing src/gsm/gsm0411_smc.lo
Removing src/gsm/gsm0411_smr.lo
Removing src/gsm/gsm0411_utils.lo
Removing src/gsm/gsm0414.lo
Removing src/gsm/gsm0480.lo
Removing src/gsm/gsm0502.lo
Removing src/gsm/gsm0503_conv.c
Removing src/gsm/gsm0503_conv.lo
Removing src/gsm/gsm0808.lo
Removing src/gsm/gsm0808_utils.lo
Removing src/gsm/gsm23003.lo
Removing src/gsm/gsm23236.lo
Removing src/gsm/gsm29118.lo
Removing src/gsm/gsm29205.lo
Removing src/gsm/gsm44021.lo
Removing src/gsm/gsm44068.lo
Removing src/gsm/gsm48.lo
Removing src/gsm/gsm48049.lo
Removing src/gsm/gsm48_arfcn_range_encode.lo
Removing src/gsm/gsm48_ie.lo
Removing src/gsm/gsm48_rest_octets.lo
Removing src/gsm/gsm_04_08_gprs.lo
Removing src/gsm/gsm_utils.lo
Removing src/gsm/gsup.lo
Removing src/gsm/gsup_sms.lo
Removing src/gsm/ipa.lo
Removing src/gsm/iuup.lo
Removing src/gsm/kasumi.lo
Removing src/gsm/kdf.lo
Removing src/gsm/kdf/.deps/
Removing src/gsm/lapdm.lo
Removing src/gsm/libgsmint.la
Removing src/gsm/libosmogsm.la
Removing src/gsm/milenage/.deps/
Removing src/gsm/milenage/.dirstamp
Removing src/gsm/milenage/.libs/
Removing src/gsm/milenage/aes-encblock.lo
Removing src/gsm/milenage/aes-internal-enc.lo
Removing src/gsm/milenage/aes-internal.lo
Removing src/gsm/milenage/milenage.lo
Removing src/gsm/mncc.lo
Removing src/gsm/oap.lo
Removing src/gsm/oap_client.lo
Removing src/gsm/rlp.lo
Removing src/gsm/rsl.lo
Removing src/gsm/rxlev_stat.lo
Removing src/gsm/sysinfo.lo
Removing src/gsm/tlv_parser.lo
Removing src/gsm/tuak/.deps/
Removing src/gsm/tuak/.dirstamp
Removing src/gsm/tuak/.libs/
Removing src/gsm/tuak/KeccakP-1600-3gpp.lo
Removing src/gsm/tuak/tuak.lo
Removing src/isdn/.deps/
Removing src/isdn/.libs/
Removing src/isdn/Makefile
Removing src/isdn/Makefile.in
Removing src/isdn/i460_mux.lo
Removing src/isdn/lapd_core.lo
Removing src/isdn/libisdnint.la
Removing src/isdn/libosmoisdn.la
Removing src/isdn/v110.lo
Removing src/isdn/v110_ta.lo
Removing src/pseudotalloc/.deps/
Removing src/pseudotalloc/Makefile
Removing src/pseudotalloc/Makefile.in
Removing src/sim/.deps/
Removing src/sim/.libs/
Removing src/sim/Makefile
Removing src/sim/Makefile.in
Removing src/sim/card_fs_hpsim.lo
Removing src/sim/card_fs_isim.lo
Removing src/sim/card_fs_sim.lo
Removing src/sim/card_fs_tetra.lo
Removing src/sim/card_fs_uicc.lo
Removing src/sim/card_fs_usim.lo
Removing src/sim/class_tables.lo
Removing src/sim/core.lo
Removing src/sim/libosmosim.la
Removing src/sim/reader.lo
Removing src/sim/reader_pcsc.lo
Removing src/usb/.deps/
Removing src/usb/.libs/
Removing src/usb/Makefile
Removing src/usb/Makefile.in
Removing src/usb/libosmousb.la
Removing src/usb/osmo_libusb.lo
Removing src/vty/.deps/
Removing src/vty/.libs/
Removing src/vty/Makefile
Removing src/vty/Makefile.in
Removing src/vty/buffer.lo
Removing src/vty/command.lo
Removing src/vty/cpu_sched_vty.lo
Removing src/vty/fsm_vty.lo
Removing src/vty/libosmovty.la
Removing src/vty/logging_vty.lo
Removing src/vty/stats_vty.lo
Removing src/vty/talloc_ctx_vty.lo
Removing src/vty/tdef_vty.lo
Removing src/vty/telnet_interface.lo
Removing src/vty/utils.lo
Removing src/vty/vector.lo
Removing src/vty/vty.lo
Removing stamp-h1
Removing tapset/Makefile
Removing tapset/Makefile.in
Removing tests/.deps/
Removing tests/Makefile
Removing tests/Makefile.in
Removing tests/a5/.deps/
Removing tests/abis/.deps/
Removing tests/atconfig
Removing tests/atlocal
Removing tests/auth/.deps/
Removing tests/base64/.deps/
Removing tests/bitgen/.deps/
Removing tests/bits/.deps/
Removing tests/bitvec/.deps/
Removing tests/bsslap/.deps/
Removing tests/bssmap_le/.deps/
Removing tests/codec/.deps/
Removing tests/coding/.deps/
Removing tests/comp128/.deps/
Removing tests/context/.deps/
Removing tests/conv/.deps/
Removing tests/conv/gsm0503_test_vectors.c
Removing tests/ctrl/.deps/
Removing tests/dtx/.deps/
Removing tests/endian/.deps/
Removing tests/exec/.deps/
Removing tests/fr/.deps/
Removing tests/fsm/.deps/
Removing tests/gad/.deps/
Removing tests/gb/.deps/
Removing tests/gea/.deps/
Removing tests/gprs/.deps/
Removing tests/gsm0408/.deps/
Removing tests/gsm0502/.deps/
Removing tests/gsm0808/.deps/
Removing tests/gsm23003/.deps/
Removing tests/gsm23236/.deps/
Removing tests/gsm29205/.deps/
Removing tests/gsm44021/.deps/
Removing tests/gsm48/.deps/
Removing tests/gsup/.deps/
Removing tests/i460_mux/.deps/
Removing tests/it_q/.deps/
Removing tests/iuup/.deps/
Removing tests/jhash/.deps/
Removing tests/kasumi/.deps/
Removing tests/lapd/.deps/
Removing tests/logging/.deps/
Removing tests/loggingrb/.deps/
Removing tests/msgb/.deps/
Removing tests/msgfile/.deps/
Removing tests/oap/.deps/
Removing tests/osmo_io/.deps/
Removing tests/prbs/.deps/
Removing tests/rlp/.deps/
Removing tests/sercomm/.deps/
Removing tests/sim/.deps/
Removing tests/sms/.deps/
Removing tests/smscb/.deps/
Removing tests/sockaddr_str/.deps/
Removing tests/socket/.deps/
Removing tests/soft_uart/.deps/
Removing tests/stats/.deps/
Removing tests/strrb/.deps/
Removing tests/tdef/.deps/
Removing tests/time_cc/.deps/
Removing tests/timer/.deps/
Removing tests/tlv/.deps/
Removing tests/use_count/.deps/
Removing tests/ussd/.deps/
Removing tests/utils/.deps/
Removing tests/v110/.deps/
Removing tests/vty/.deps/
Removing tests/write_queue/.deps/
Removing utils/.deps/
Removing utils/.libs/
Removing utils/Makefile
Removing utils/Makefile.in
Removing utils/__pycache__/
Removing utils/gsmtap-logsend.o
Removing utils/osmo-aka-verify
Removing utils/osmo-aka-verify.o
Removing utils/osmo-arfcn
Removing utils/osmo-arfcn.o
Removing utils/osmo-auc-gen
Removing utils/osmo-auc-gen.o
Removing utils/osmo-config-merge
Removing utils/osmo-config-merge.o
Removing utils/osmo-gsmtap-logsend
Removing utils/osmo-ns-dummy
Removing utils/osmo-ns-dummy-vty.o
Removing utils/osmo-ns-dummy.o
Removing utils/osmo-sim-test
Removing utils/osmo-stat-dummy/.deps/
Removing utils/osmo-stat-dummy/Makefile
Removing utils/osmo-stat-dummy/Makefile.in
Removing utils/osmo_sim_test-osmo-sim-test.o
+ [ -d layer1-headers ]
[True] $ /bin/sh -xe /tmp/jenkins7480589655666839215.sh
+ [ False != True ]
+ rm -rf /home/osmocom-build/jenkins/workspace/master-osmo-pcu/FIRMWARE_VERSION/v2017.01/WITH_MANUALS/0/label/osmocom-master/with_dsp/lc15/with_vty/True
+ mkdir -p /home/osmocom-build/jenkins/workspace/master-osmo-pcu/FIRMWARE_VERSION/v2017.01/WITH_MANUALS/0/label/osmocom-master/with_dsp/lc15/with_vty/True
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 941950 killed;
[ssh-agent] Stopped.
Archiving artifacts
‘**/core’ doesn’t match anything: ‘**’ exists but not ‘**/core’
No artifacts found that match the file pattern "**/core, **/testsuite.log, **/workspace.tar.xz, **/app-release.apk". Configuration error?
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
