Skipping 397 KB..
Full Log logging level lio notice
!
stats interval 5
!
line vty
no login
!
ns
timer tns-block 3
timer tns-block-retries 3
timer tns-reset 3
timer tns-reset-retries 3
timer tns-test 30
timer tns-alive 3
timer tns-alive-retries 10
timer tsns-prov 3
timer tsns-size-retries 3
timer tsns-config-retries 3
timer tsns-procedures-retries 3
bind udp local
listen 127.0.0.1 23000
accept-ipaccess
ip-sns signalling-weight 1 data-weight 1
bssgp
cs7 instance 0
point-code 0.23.4
sgsn
gtp state-dir ./
gtp local-ip 127.0.0.1
ggsn 0 remote-ip 127.0.0.2
ggsn 0 gtp-version 1
ggsn 0 echo-interval 60
encryption gea 0 3
encryption uea 1 2
encryption cipher-plugin-path /foo/bar
gsup remote-ip 127.0.0.1
gsup remote-port 4222
auth-policy remote
gsup oap-id 0
! apn * ggsn 0
no cdr filename
no cdr trap
cdr interval 600
no compression rfc1144
no compression v42bis
cs7-instance-iu 0
end
signal 15 received
Terminating took 0.897s
RESULTS:
pass: ./osmo-sgsn_test-nodes.vty
rm -f ./gsn_restart
make[7]: Leaving directory '/build/tests'
make[6]: Leaving directory '/build/tests'
make ctrl-python-test
make[6]: Entering directory '/build/tests'
./ctrl_test_runner.py -w /build -v
testListSubscribers (__main__.TestCtrlSGSN.testListSubscribers) ... ok
----------------------------------------------------------------------
Ran 1 test in 3.416s
OK
confpath /build/tests/.., workdir /build
Running tests for specific control commands
Opening /dev/null
Launching: PWD=/build './src/sgsn/osmo-sgsn' '-c' '/build/tests/../tests/osmo-sgsn.cfg'
Connecting to host 127.0.0.1:4251
Sending "GET 1000 subscriber-list-active-v1"
Got message: GET_REPLY 1000 subscriber-list-active-v1
Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'subscriber-list-active-v1', 'value': None}}
Terminating took 0.897s
Process returned code: 0
rm -f ../gsn_restart ../gtphub_restart_count
make[6]: Leaving directory '/build/tests'
make[5]: Leaving directory '/build/tests'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
Making check in doc
make[2]: Entering directory '/build/doc'
Making check in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/doc/examples'
Making check in manuals
make[3]: Entering directory '/build/doc/manuals'
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmosgsn-usermanual.check; \
fi
make[4]: Entering directory '/build/doc/manuals'
if ! [ -f osmosgsn-usermanual.adoc ]; then \
ln -s osmosgsn-usermanual.adoc osmosgsn-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' osmosgsn-usermanual.adoc > osmosgsn-usermanual.check 2>&1
touch osmosgsn-usermanual.check
make[4]: Leaving directory '/build/doc/manuals'
make[3]: Leaving directory '/build/doc/manuals'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
make[2]: Entering directory '/build'
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ DISTCHECK_CONFIGURE_FLAGS='--enable-werror --enable-iu --enable-external-tests --enable-manuals'
+ make -j 12 distcheck
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make distdir-am
make[2]: Entering directory '/build'
if test -d "osmo-sgsn-1.12.0.37-944b"; then find "osmo-sgsn-1.12.0.37-944b" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-sgsn-1.12.0.37-944b" || { sleep 5 && rm -rf "osmo-sgsn-1.12.0.37-944b"; }; else :; fi
test -d "osmo-sgsn-1.12.0.37-944b" || mkdir "osmo-sgsn-1.12.0.37-944b"
(cd include && make top_distdir=../osmo-sgsn-1.12.0.37-944b distdir=../osmo-sgsn-1.12.0.37-944b/include \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/include'
make distdir-am
make[4]: Entering directory '/build/include'
(cd osmocom && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/include/osmocom \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/include/osmocom'
make distdir-am
make[6]: Entering directory '/build/include/osmocom'
(cd gtphub && make top_distdir=../../../osmo-sgsn-1.12.0.37-944b distdir=../../../osmo-sgsn-1.12.0.37-944b/include/osmocom/gtphub \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/include/osmocom/gtphub'
make distdir-am
make[8]: Entering directory '/build/include/osmocom/gtphub'
make[8]: Leaving directory '/build/include/osmocom/gtphub'
make[7]: Leaving directory '/build/include/osmocom/gtphub'
(cd sgsn && make top_distdir=../../../osmo-sgsn-1.12.0.37-944b distdir=../../../osmo-sgsn-1.12.0.37-944b/include/osmocom/sgsn \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[7]: Entering directory '/build/include/osmocom/sgsn'
make distdir-am
make[8]: Entering directory '/build/include/osmocom/sgsn'
make[8]: Leaving directory '/build/include/osmocom/sgsn'
make[7]: Leaving directory '/build/include/osmocom/sgsn'
make[6]: Leaving directory '/build/include/osmocom'
make[5]: Leaving directory '/build/include/osmocom'
make[4]: Leaving directory '/build/include'
make[3]: Leaving directory '/build/include'
(cd src && make top_distdir=../osmo-sgsn-1.12.0.37-944b distdir=../osmo-sgsn-1.12.0.37-944b/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/src'
make distdir-am
make[4]: Entering directory '/build/src'
(cd gprs && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/src/gprs \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/gprs'
make distdir-am
make[6]: Entering directory '/build/src/gprs'
make[6]: Leaving directory '/build/src/gprs'
make[5]: Leaving directory '/build/src/gprs'
(cd sgsn && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/src/sgsn \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/sgsn'
make distdir-am
make[6]: Entering directory '/build/src/sgsn'
make[6]: Leaving directory '/build/src/sgsn'
make[5]: Leaving directory '/build/src/sgsn'
(cd gtphub && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/src/gtphub \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/src/gtphub'
make distdir-am
make[6]: Entering directory '/build/src/gtphub'
make[6]: Leaving directory '/build/src/gtphub'
make[5]: Leaving directory '/build/src/gtphub'
make[4]: Leaving directory '/build/src'
make[3]: Leaving directory '/build/src'
(cd contrib && make top_distdir=../osmo-sgsn-1.12.0.37-944b distdir=../osmo-sgsn-1.12.0.37-944b/contrib \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/contrib'
make distdir-am
make[4]: Entering directory '/build/contrib'
(cd systemd && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/contrib/systemd \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/contrib/systemd'
make distdir-am
make[6]: Entering directory '/build/contrib/systemd'
make[6]: Leaving directory '/build/contrib/systemd'
make[5]: Leaving directory '/build/contrib/systemd'
make[4]: Leaving directory '/build/contrib'
make[3]: Leaving directory '/build/contrib'
(cd tests && make top_distdir=../osmo-sgsn-1.12.0.37-944b distdir=../osmo-sgsn-1.12.0.37-944b/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/tests'
make distdir-am
make[4]: Entering directory '/build/tests'
(cd gprs && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/tests/gprs \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/gprs'
make distdir-am
make[6]: Entering directory '/build/tests/gprs'
make[6]: Leaving directory '/build/tests/gprs'
make[5]: Leaving directory '/build/tests/gprs'
(cd gtphub && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/tests/gtphub \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/gtphub'
make distdir-am
make[6]: Entering directory '/build/tests/gtphub'
make[6]: Leaving directory '/build/tests/gtphub'
make[5]: Leaving directory '/build/tests/gtphub'
(cd gprs_routing_area && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/tests/gprs_routing_area \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/gprs_routing_area'
make distdir-am
make[6]: Entering directory '/build/tests/gprs_routing_area'
make[6]: Leaving directory '/build/tests/gprs_routing_area'
make[5]: Leaving directory '/build/tests/gprs_routing_area'
(cd sgsn && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/tests/sgsn \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/sgsn'
make distdir-am
make[6]: Entering directory '/build/tests/sgsn'
make[6]: Leaving directory '/build/tests/sgsn'
make[5]: Leaving directory '/build/tests/sgsn'
(cd xid && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/tests/xid \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/xid'
make distdir-am
make[6]: Entering directory '/build/tests/xid'
make[6]: Leaving directory '/build/tests/xid'
make[5]: Leaving directory '/build/tests/xid'
(cd sndcp_xid && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/tests/sndcp_xid \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/sndcp_xid'
make distdir-am
make[6]: Entering directory '/build/tests/sndcp_xid'
make[6]: Leaving directory '/build/tests/sndcp_xid'
make[5]: Leaving directory '/build/tests/sndcp_xid'
(cd slhc && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/tests/slhc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/slhc'
make distdir-am
make[6]: Entering directory '/build/tests/slhc'
make[6]: Leaving directory '/build/tests/slhc'
make[5]: Leaving directory '/build/tests/slhc'
(cd v42bis && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/tests/v42bis \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/tests/v42bis'
make distdir-am
make[6]: Entering directory '/build/tests/v42bis'
make[6]: Leaving directory '/build/tests/v42bis'
make[5]: Leaving directory '/build/tests/v42bis'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
(cd doc && make top_distdir=../osmo-sgsn-1.12.0.37-944b distdir=../osmo-sgsn-1.12.0.37-944b/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make distdir-am
make[4]: Entering directory '/build/doc'
(cd examples && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/examples'
make distdir-am
make[6]: Entering directory '/build/doc/examples'
make \
top_distdir="../../osmo-sgsn-1.12.0.37-944b" distdir="../../osmo-sgsn-1.12.0.37-944b/doc/examples" \
dist-hook
make[7]: Entering directory '/build/doc/examples'
for f in $(find . -name '*.cfg*' | sed -e 's,^.,,'); do \
j="../../osmo-sgsn-1.12.0.37-944b/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ./$f $j; \
done
make[7]: Leaving directory '/build/doc/examples'
make[6]: Leaving directory '/build/doc/examples'
make[5]: Leaving directory '/build/doc/examples'
(cd manuals && make top_distdir=../../osmo-sgsn-1.12.0.37-944b distdir=../../osmo-sgsn-1.12.0.37-944b/doc/manuals \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/manuals'
make distdir-am
make[6]: Entering directory '/build/doc/manuals'
make[6]: Leaving directory '/build/doc/manuals'
make[5]: Leaving directory '/build/doc/manuals'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
make \
top_distdir="osmo-sgsn-1.12.0.37-944b" distdir="osmo-sgsn-1.12.0.37-944b" \
dist-hook
make[3]: Entering directory '/build'
echo 1.12.0.37-944b > osmo-sgsn-1.12.0.37-944b/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "osmo-sgsn-1.12.0.37-944b" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-sgsn-1.12.0.37-944b"
make[2]: Leaving directory '/build'
tardir=osmo-sgsn-1.12.0.37-944b && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-sgsn-1.12.0.37-944b.tar.bz2
tardir=osmo-sgsn-1.12.0.37-944b && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-sgsn-1.12.0.37-944b.tar.gz
make[1]: Leaving directory '/build'
if test -d "osmo-sgsn-1.12.0.37-944b"; then find "osmo-sgsn-1.12.0.37-944b" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-sgsn-1.12.0.37-944b" || { sleep 5 && rm -rf "osmo-sgsn-1.12.0.37-944b"; }; else :; fi
case 'osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2' in \
*.tar.gz*) \
eval GZIP= gzip --best -dc osmo-sgsn-1.12.0.37-944b.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
bzip2 -dc osmo-sgsn-1.12.0.37-944b.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
lzip -dc osmo-sgsn-1.12.0.37-944b.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
xz -dc osmo-sgsn-1.12.0.37-944b.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
uncompress -c osmo-sgsn-1.12.0.37-944b.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
eval GZIP= gzip --best -dc osmo-sgsn-1.12.0.37-944b.shar.gz | unshar ;;\
*.zip*) \
unzip osmo-sgsn-1.12.0.37-944b.zip ;;\
*.tar.zst*) \
zstd -dc osmo-sgsn-1.12.0.37-944b.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w osmo-sgsn-1.12.0.37-944b
chmod u+w osmo-sgsn-1.12.0.37-944b
mkdir osmo-sgsn-1.12.0.37-944b/_build osmo-sgsn-1.12.0.37-944b/_build/sub osmo-sgsn-1.12.0.37-944b/_inst
chmod a-w osmo-sgsn-1.12.0.37-944b
test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
&& am__cwd=`pwd` \
&& CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \
&& ../../configure \
--with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \
--enable-werror --enable-iu --enable-external-tests --enable-manuals \
--srcdir=../.. --prefix="$dc_install_base" \
&& make \
&& make dvi \
&& make check \
&& make install \
&& make installcheck \
&& make uninstall \
&& make distuninstallcheck_dir="$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$dc_destdir") \
&& make DESTDIR="$dc_destdir" install \
&& make DESTDIR="$dc_destdir" uninstall \
&& make DESTDIR="$dc_destdir" \
distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
} || { rm -rf "$dc_destdir"; exit 1; }) \
&& rm -rf "$dc_destdir" \
&& make dist \
&& rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \
&& make distcleancheck \
&& cd "$am__cwd" \
|| exit 1
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmogb >= 1.10.0... yes
checking for libosmoabis >= 1.6.0... yes
checking for libosmo-gsup-client >= 1.8.0... yes
checking for libgtp >= 1.12.0... yes
checking for libosmo-sigtran >= 1.9.0... yes
checking for libasn1c >= 0.9.30... yes
checking for libosmo-ranap >= 1.6.0... yes
checking for libcares... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking whether struct tm has tm_gmtoff member... no
checking for python3... yes
checking for osmotestvty.py... yes
checking whether to enable VTY/CTRL tests... yes
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
CFLAGS="-g -O2 -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs"
CPPFLAGS=" -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp -Wall -Wno-trigraphs"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/gtphub/Makefile
config.status: creating include/osmocom/sgsn/Makefile
config.status: creating src/Makefile
config.status: creating src/gprs/Makefile
config.status: creating src/sgsn/Makefile
config.status: creating src/gtphub/Makefile
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating tests/gprs/Makefile
config.status: creating tests/gprs_routing_area/Makefile
config.status: creating tests/sgsn/Makefile
config.status: creating tests/gtphub/Makefile
config.status: creating tests/xid/Makefile
config.status: creating tests/sndcp_xid/Makefile
config.status: creating tests/slhc/Makefile
config.status: creating tests/v42bis/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
make[1]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make all-recursive
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
Making all in include
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
Making all in osmocom
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
Making all in gtphub
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/gtphub'
make[5]: Nothing to be done for 'all'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/gtphub'
Making all in sgsn
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/sgsn'
make[5]: Nothing to be done for 'all'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/sgsn'
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
Making all in src
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
Making all in gprs
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gprs'
CC gprs_llc_parse.lo
CC crc24.lo
CC gprs_utils.lo
CC sgsn_ares.lo
CCLD libcommon.la
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gprs'
Making all in sgsn
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/sgsn'
CC apn.o
CC gprs_bssgp.o
CC gprs_gmm_attach.o
CC gprs_gmm.o
CC gprs_gmm_fsm.o
CC gprs_mm_state_gb_fsm.o
CC gprs_gmm_util.o
CC gprs_routing_area.o
CC gprs_ns.o
CC gprs_sm.o
CC gprs_sndcp.o
CC gprs_sndcp_comp.o
CC gprs_sndcp_dcomp.o
CC gprs_sndcp_pcomp.o
CC gprs_sndcp_vty.o
CC gprs_sndcp_xid.o
CC gtp_ggsn.o
CC gtp_mme.o
CC sgsn.o
CC sgsn_main.o
CC sgsn_vty.o
CC sgsn_libgtp.o
CC gprs_llc.o
CC gprs_llc_vty.o
CC mmctx.o
CC pdpctx.o
CC sgsn_ctrl.o
CC sgsn_auth.o
CC gprs_subscriber.o
CC sgsn_cdr.o
CC sgsn_rim.o
CC slhc.o
CC gprs_llc_xid.o
CC v42bis.o
CC gprs_mm_state_iu_fsm.o
CC gprs_ranap.o
../../../../src/sgsn/gprs_ranap.c: In function 'gsm0408_gprs_rcvmsg_iu':
../../../../src/sgsn/gprs_ranap.c:274:9: note: '#pragma message: set drop_cipherable arg for gsm0408_rcv_gmm() from IuPS?'
274 | #pragma message "set drop_cipherable arg for gsm0408_rcv_gmm() from IuPS?"
| ^~~~~~~
CCLD osmo-sgsn
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/sgsn'
Making all in gtphub
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gtphub'
CC gtphub_main.o
CC gtphub.o
CC gtphub_sock.o
CC gtphub_ares.o
CC gtphub_vty.o
CCLD osmo-gtphub
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gtphub'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
Making all in contrib
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
Making all in systemd
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
Making all in tests
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
Making all in gprs
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs'
Making all in gtphub
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gtphub'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gtphub'
Making all in gprs_routing_area
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs_routing_area'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs_routing_area'
Making all in sgsn
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sgsn'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sgsn'
Making all in xid
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/xid'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/xid'
Making all in sndcp_xid
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sndcp_xid'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sndcp_xid'
Making all in slhc
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/slhc'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/slhc'
Making all in v42bis
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/v42bis'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/v42bis'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
Making all in doc
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc'
Making all in examples
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/examples'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/examples'
Making all in manuals
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals'
ln -s /opt/osmo-gsm-manuals/build build
ln -s /opt/osmo-gsm-manuals/common common
mkdir -p generated
xmllint --xinclude --postvalid --noout ../../../../doc/manuals/osmosgsn-vty-reference.xml
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh "/opt/osmo-gsm-manuals/merge_doc.xsl" \
$(/opt/osmo-gsm-manuals/build/find_existing_path.sh "vty/*reference.xml" . ../../../../doc/manuals) \
/opt/osmo-gsm-manuals/common/vty_additions.xml \
../../../../doc/manuals/vty/*additions*.xml > generated/combined.xml
+ mktemp
+ combined=/tmp/tmp.1k0kjvjsJP
+ mktemp
+ combine_src=/tmp/tmp.LB4Xn5Vgzs
+ cp ../../../../doc/manuals/vty/sgsn_vty_reference.xml /tmp/tmp.1k0kjvjsJP
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.1k0kjvjsJP /tmp/tmp.LB4Xn5Vgzs
+ xsltproc -o /tmp/tmp.1k0kjvjsJP --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.LB4Xn5Vgzs
if ! [ -f osmosgsn-usermanual.adoc ]; then \
ln -s ../../../../doc/manuals/osmosgsn-usermanual.adoc osmosgsn-usermanual.adoc; \
fi
TEXINPUTS="/opt/osmo-gsm-manuals" \
a2x -vv -L --asciidoc-opts="-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' " --dblatex-opts="--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 " -a docinfo -a revnumber="DRAFT 1.12.0-37-g944b" -a revdate="2025-Jan-07" osmosgsn-usermanual.adoc
+ [ -n ../../../../doc/manuals/vty/sgsn_vty_additions.xml ]
+ realpath ../../../../doc/manuals/vty/sgsn_vty_additions.xml
+ addition=/build/osmo-sgsn-1.12.0.37-944b/doc/manuals/vty/sgsn_vty_additions.xml
+ shift
+ cp /tmp/tmp.1k0kjvjsJP /tmp/tmp.LB4Xn5Vgzs
+ xsltproc -o /tmp/tmp.1k0kjvjsJP --stringparam with /build/osmo-sgsn-1.12.0.37-944b/doc/manuals/vty/sgsn_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.LB4Xn5Vgzs
+ [ -n ]
+ cat /tmp/tmp.1k0kjvjsJP
+ rm -f /tmp/tmp.LB4Xn5Vgzs
+ rm -f /tmp/tmp.1k0kjvjsJP
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl generated/combined.xml \
> generated/docbook_vty.xml
set -x && \
export GIT_DATE="unknown" && \
export REVNUMBER="DRAFT 1.12.0-37-g944b" && \
export TEMPFILE="/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml" && \
/opt/osmo-gsm-manuals/build/docbook-set-revhistory.py "../../../../doc/manuals/osmosgsn-vty-reference.xml" && \
dblatex \
--config /opt/osmo-gsm-manuals/build/dblatex_config.xml \
--xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/generated" \
\
-P draft.mode=no \
-o osmosgsn-vty-reference.pdf \
"$TEMPFILE" && \
rm $TEMPFILE
+ export GIT_DATE=unknown
+ GIT_DATE=unknown
+ export 'REVNUMBER=DRAFT 1.12.0-37-g944b'
+ REVNUMBER='DRAFT 1.12.0-37-g944b'
+ export TEMPFILE=/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml
+ TEMPFILE=/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml
+ /opt/osmo-gsm-manuals/build/docbook-set-revhistory.py ../../../../doc/manuals/osmosgsn-vty-reference.xml
asciidoc: reading: /etc/asciidoc/asciidoc.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/asciidoc.conf
Changing revhistory to DRAFT 1.12.0-37-g944b, unknown...
+ dblatex --config /opt/osmo-gsm-manuals/build/dblatex_config.xml '--xslt-opts=--path /opt/osmo-gsm-manuals/common/chapters:/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/generated' -P draft.mode=no -o osmosgsn-vty-reference.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml
asciidoc: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual.adoc
asciidoc: reading: /etc/asciidoc/docbook45.conf
asciidoc: reading: /etc/asciidoc/filters/music/music-filter.conf
asciidoc: reading: /etc/asciidoc/filters/latex/latex-filter.conf
asciidoc: reading: /etc/asciidoc/filters/code/code-filter.conf
asciidoc: reading: /etc/asciidoc/filters/source/source-highlight-filter.conf
asciidoc: reading: /etc/asciidoc/filters/graphviz/graphviz-filter.conf
asciidoc: reading: /etc/asciidoc/lang-en.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/mscgen-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/diag-filter.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf
asciidoc: reading: /opt/osmo-gsm-manuals/build/graphviz-filter.conf
asciidoc: writing: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual.xml
asciidoc: osmosgsn-usermanual.adoc: line 5: evaluating: {include:/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual-docinfo.xml}
asciidoc: WARNING: osmosgsn-usermanual.adoc: line 5: {include:/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual-docinfo.xml}: file does not exist
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/preface.adoc
asciidoc: osmosgsn-usermanual.adoc: line 8: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/preface.adoc
Build the book set list...
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/overview.adoc
asciidoc: osmosgsn-usermanual.adoc: line 10: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/overview.adoc
asciidoc: overview.adoc: line 24: evaluating: {counter2:target-number}
asciidoc: overview.adoc: line 24: evaluating: {set2:target:osmosgsn-usermanual__1.svg}
asciidoc: overview.adoc: line 36: filtering: dot -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__1.svg" -T svg && echo " "
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/running.adoc
asciidoc: osmosgsn-usermanual.adoc: line 12: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/running.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/control.adoc
asciidoc: osmosgsn-usermanual.adoc: line 14: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/control.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/vty.adoc
asciidoc: osmosgsn-usermanual.adoc: line 16: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/vty.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/logging.adoc
asciidoc: osmosgsn-usermanual.adoc: line 18: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/logging.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/configuration.adoc
asciidoc: osmosgsn-usermanual.adoc: line 20: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/configuration.adoc
Build the listings...
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/cs7-config.adoc
asciidoc: osmosgsn-usermanual.adoc: line 22: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/cs7-config.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gb-ns2.adoc
asciidoc: osmosgsn-usermanual.adoc: line 24: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gb-ns2.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gb-ip-sns.msc
asciidoc: gb-ns2.adoc: line 153: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gb-ip-sns.msc
asciidoc: gb-ns2.adoc: line 152: evaluating: {counter2:target-number}
asciidoc: gb-ns2.adoc: line 152: evaluating: {set2:target:osmosgsn-usermanual__2.svg}
asciidoc: gb-ip-sns.msc: line 38: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__2.svg" -Tsvg -
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gb-ns2-nsvc-states-reset-block.dot
asciidoc: gb-ns2.adoc: line 436: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gb-ns2-nsvc-states-reset-block.dot
asciidoc: gb-ns2.adoc: line 435: evaluating: {counter2:target-number}
asciidoc: gb-ns2.adoc: line 435: evaluating: {set2:target:osmosgsn-usermanual__3.svg}
asciidoc: gb-ns2-nsvc-states-reset-block.dot: line 9: filtering: dot -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__3.svg" -T svg && echo " "
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gb-ns2-nsvc-states-alive.dot
asciidoc: gb-ns2.adoc: line 443: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gb-ns2-nsvc-states-alive.dot
asciidoc: gb-ns2.adoc: line 442: evaluating: {counter2:target-number}
asciidoc: gb-ns2.adoc: line 442: evaluating: {set2:target:osmosgsn-usermanual__4.svg}
asciidoc: gb-ns2-nsvc-states-alive.dot: line 6: filtering: dot -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__4.svg" -T svg && echo " "
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/control_if.adoc
asciidoc: osmosgsn-usermanual.adoc: line 26: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/control_if.adoc
asciidoc: control_if.adoc: line 25: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 25: evaluating: {set2:target:osmosgsn-usermanual__5.svg}
asciidoc: control_if.adoc: line 32: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__5.svg" -Tsvg - && echo " "
Build _temp_osmosgsn-vty-reference.pdf
asciidoc: control_if.adoc: line 40: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 40: evaluating: {set2:target:osmosgsn-usermanual__6.svg}
asciidoc: control_if.adoc: line 46: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__6.svg" -Tsvg - && echo " "
asciidoc: control_if.adoc: line 77: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 77: evaluating: {set2:target:osmosgsn-usermanual__7.svg}
asciidoc: control_if.adoc: line 83: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__7.svg" -Tsvg -
asciidoc: control_if.adoc: line 88: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 88: evaluating: {set2:target:osmosgsn-usermanual__8.svg}
asciidoc: control_if.adoc: line 94: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__8.svg" -Tsvg -
asciidoc: control_if.adoc: line 104: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 104: evaluating: {set2:target:osmosgsn-usermanual__9.svg}
asciidoc: control_if.adoc: line 110: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__9.svg" -Tsvg -
asciidoc: control_if.adoc: line 115: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 115: evaluating: {set2:target:osmosgsn-usermanual__10.svg}
asciidoc: control_if.adoc: line 121: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__10.svg" -Tsvg -
asciidoc: control_if.adoc: line 131: evaluating: {counter2:target-number}
asciidoc: control_if.adoc: line 131: evaluating: {set2:target:osmosgsn-usermanual__11.svg}
asciidoc: control_if.adoc: line 136: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__11.svg" -Tsvg -
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/oap.adoc
asciidoc: osmosgsn-usermanual.adoc: line 28: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/oap.adoc
asciidoc: oap.adoc: line 27: evaluating: {counter2:target-number}
asciidoc: oap.adoc: line 27: evaluating: {set2:target:osmosgsn-usermanual__12.svg}
asciidoc: oap.adoc: line 35: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__12.svg" -Tsvg -
asciidoc: oap.adoc: line 40: evaluating: {counter2:target-number}
asciidoc: oap.adoc: line 40: evaluating: {set2:target:osmosgsn-usermanual__13.svg}
asciidoc: oap.adoc: line 46: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__13.svg" -Tsvg -
asciidoc: oap.adoc: line 51: evaluating: {counter2:target-number}
asciidoc: oap.adoc: line 51: evaluating: {set2:target:osmosgsn-usermanual__14.svg}
asciidoc: oap.adoc: line 61: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__14.svg" -Tsvg -
asciidoc: oap.adoc: line 243: evaluating: {counter2:target-number}
asciidoc: oap.adoc: line 243: evaluating: {set2:target:osmosgsn-usermanual__15.svg}
asciidoc: oap.adoc: line 251: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__15.svg" -Tsvg - && echo " "
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gsup.adoc
asciidoc: osmosgsn-usermanual.adoc: line 30: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gsup.adoc
asciidoc: gsup.adoc: line 63: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 63: evaluating: {set2:target:osmosgsn-usermanual__16.svg}
asciidoc: gsup.adoc: line 70: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__16.svg" -Tsvg -
asciidoc: gsup.adoc: line 75: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 75: evaluating: {set2:target:osmosgsn-usermanual__17.svg}
asciidoc: gsup.adoc: line 82: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__17.svg" -Tsvg -
asciidoc: gsup.adoc: line 92: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 92: evaluating: {set2:target:osmosgsn-usermanual__18.svg}
asciidoc: gsup.adoc: line 98: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__18.svg" -Tsvg -
asciidoc: gsup.adoc: line 113: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 113: evaluating: {set2:target:osmosgsn-usermanual__19.svg}
asciidoc: gsup.adoc: line 122: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__19.svg" -Tsvg -
asciidoc: gsup.adoc: line 127: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 127: evaluating: {set2:target:osmosgsn-usermanual__20.svg}
asciidoc: gsup.adoc: line 134: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__20.svg" -Tsvg -
asciidoc: gsup.adoc: line 144: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 144: evaluating: {set2:target:osmosgsn-usermanual__21.svg}
asciidoc: gsup.adoc: line 151: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__21.svg" -Tsvg -
asciidoc: gsup.adoc: line 156: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 156: evaluating: {set2:target:osmosgsn-usermanual__22.svg}
asciidoc: gsup.adoc: line 163: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__22.svg" -Tsvg -
asciidoc: gsup.adoc: line 175: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 175: evaluating: {set2:target:osmosgsn-usermanual__23.svg}
asciidoc: gsup.adoc: line 182: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__23.svg" -Tsvg -
asciidoc: gsup.adoc: line 194: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 194: evaluating: {set2:target:osmosgsn-usermanual__24.svg}
asciidoc: gsup.adoc: line 201: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__24.svg" -Tsvg -
asciidoc: gsup.adoc: line 213: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 213: evaluating: {set2:target:osmosgsn-usermanual__25.svg}
asciidoc: gsup.adoc: line 220: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__25.svg" -Tsvg -
asciidoc: gsup.adoc: line 239: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 239: evaluating: {set2:target:osmosgsn-usermanual__26.svg}
asciidoc: gsup.adoc: line 251: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__26.svg" -Tsvg -
asciidoc: gsup.adoc: line 260: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 260: evaluating: {set2:target:osmosgsn-usermanual__27.svg}
asciidoc: gsup.adoc: line 278: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__27.svg" -Tsvg -
asciidoc: gsup.adoc: line 289: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 289: evaluating: {set2:target:osmosgsn-usermanual__28.svg}
asciidoc: gsup.adoc: line 297: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__28.svg" -Tsvg -
asciidoc: gsup.adoc: line 314: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 314: evaluating: {set2:target:osmosgsn-usermanual__29.svg}
asciidoc: gsup.adoc: line 321: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__29.svg" -Tsvg -
asciidoc: gsup.adoc: line 1249: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1249: evaluating: {set2:target:osmosgsn-usermanual__30.svg}
asciidoc: gsup.adoc: line 1261: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__30.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1282: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1282: evaluating: {set2:target:osmosgsn-usermanual__31.svg}
asciidoc: gsup.adoc: line 1291: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__31.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1387: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1387: evaluating: {set2:target:osmosgsn-usermanual__32.svg}
asciidoc: gsup.adoc: line 1396: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__32.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1469: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1469: evaluating: {set2:target:osmosgsn-usermanual__33.svg}
asciidoc: gsup.adoc: line 1477: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__33.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1487: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1487: evaluating: {set2:target:osmosgsn-usermanual__34.svg}
asciidoc: gsup.adoc: line 1500: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__34.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1514: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1514: evaluating: {set2:target:osmosgsn-usermanual__35.svg}
asciidoc: gsup.adoc: line 1529: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__35.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1549: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1549: evaluating: {set2:target:osmosgsn-usermanual__36.svg}
asciidoc: gsup.adoc: line 1558: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__36.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1571: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1571: evaluating: {set2:target:osmosgsn-usermanual__37.svg}
asciidoc: gsup.adoc: line 1578: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__37.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1596: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1596: evaluating: {set2:target:osmosgsn-usermanual__38.svg}
asciidoc: gsup.adoc: line 1611: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__38.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1679: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1679: evaluating: {set2:target:osmosgsn-usermanual__39.svg}
asciidoc: gsup.adoc: line 1688: filtering: "/usr/bin/python3" "./build/filter-wrapper.py" mscgen -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__39.svg" -Tsvg -
asciidoc: gsup.adoc: line 1711: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1711: evaluating: {set2:target:osmosgsn-usermanual__40.svg}
asciidoc: gsup.adoc: line 1721: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__40.svg" -Tsvg - && echo " "
asciidoc: gsup.adoc: line 1846: evaluating: {counter2:target-number}
asciidoc: gsup.adoc: line 1846: evaluating: {set2:target:osmosgsn-usermanual__41.svg}
asciidoc: gsup.adoc: line 1854: filtering: packetdiag3 -o "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__41.svg" -Tsvg - && echo " "
'osmosgsn-vty-reference.pdf' successfully built
+ rm /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/generated/_temp_osmosgsn-vty-reference.xml
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/counters.adoc
asciidoc: osmosgsn-usermanual.adoc: line 32: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals/chapters/counters.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/doc/manuals/chapters/counters_generated.adoc
asciidoc: counters.adoc: line 4: reading: /build/osmo-sgsn-1.12.0.37-944b/doc/manuals/chapters/counters_generated.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: osmosgsn-usermanual.adoc: line 34: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/port_numbers.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/bibliography.adoc
asciidoc: osmosgsn-usermanual.adoc: line 36: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/bibliography.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/glossary.adoc
asciidoc: osmosgsn-usermanual.adoc: line 38: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/glossary.adoc
asciidoc: include: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gfdl.adoc
asciidoc: osmosgsn-usermanual.adoc: line 40: reading: /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/common/chapters/gfdl.adoc
a2x: args: ['-vv', '-L', "--asciidoc-opts=-f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -f /opt/osmo-gsm-manuals/build/graphviz-filter.conf -a srcdir='/build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals' -a commondir='/opt/osmo-gsm-manuals/common' ", '--dblatex-opts=--config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 ', '-a', 'docinfo', '-a', 'revnumber=DRAFT 1.12.0-37-g944b', '-a', 'revdate=2025-Jan-07', 'osmosgsn-usermanual.adoc']
a2x: resource files: []
a2x: resource directories: ['/etc/asciidoc/stylesheets']
a2x: executing: asciidoc ['-f', '/opt/osmo-gsm-manuals/build/mscgen-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/diag-filter.conf', '-f', '/opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf', '-f', '/opt/osmo-gsm-manuals/build/graphviz-filter.conf', '-a', 'srcdir=/build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/manuals', '-a', 'commondir=/opt/osmo-gsm-manuals/common', ('--attribute', 'docinfo'), ('--attribute', 'revnumber=DRAFT 1.12.0-37-g944b'), ('--attribute', 'revdate=2025-Jan-07'), ('--verbose',), ('--backend', 'docbook'), ('-a', 'a2x-format=pdf'), ('--out-file', '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual.xml')]
a2x: executing: "dblatex" -t pdf -p "/etc/asciidoc/dblatex/asciidoc-dblatex.xsl" -s "/etc/asciidoc/dblatex/asciidoc-dblatex.sty" --config /opt/osmo-gsm-manuals/build/dblatex_config.xml -s /opt/osmo-gsm-manuals/build/custom-dblatex.sty -P draft.mode=yes -P draft.watermark=0 -V "/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual.xml"
Build the book set list...
xsltproc -o doclist.txt --xinclude --xincludestyle doclist.xsl /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual.xml
Build the listings...
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals' /usr/share/dblatex/xsl/common/mklistings.xsl /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual.xml
xsltproc -o osmosgsn-usermanual.rtex --xinclude --xincludestyle --param listings.xml '/tmp/tmpe184o4ls/listings.xml' --param current.dir '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals' /tmp/tmpe184o4ls/custom.xsl /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual.xml
XSLT stylesheets DocBook - LaTeX 2e (0.3.12)
===================================================
Error: no ID for constraint linkend: gsup-msg-purge-ms-reqs.
XRef to nonexistent id: gsup-msg-purge-ms-reqs
Error: no ID for constraint linkend: gsup-ie-pdptaddress.
XRef to nonexistent id: gsup-ie-pdptaddress
Error: no ID for constraint linkend: bssgp:bss_ctx_packets:in.
XRef to nonexistent id: bssgp:bss_ctx_packets:in
Error: no ID for constraint linkend: bssgp:bss_ctx_packets:out.
XRef to nonexistent id: bssgp:bss_ctx_packets:out
Error: no ID for constraint linkend: bssgp:bss_ctx_bytes:in.
XRef to nonexistent id: bssgp:bss_ctx_bytes:in
Error: no ID for constraint linkend: bssgp:bss_ctx_bytes:out.
XRef to nonexistent id: bssgp:bss_ctx_bytes:out
Error: no ID for constraint linkend: bssgp:bss_ctx_blocked.
XRef to nonexistent id: bssgp:bss_ctx_blocked
Error: no ID for constraint linkend: bssgp:bss_ctx_discarded.
XRef to nonexistent id: bssgp:bss_ctx_discarded
Error: no ID for constraint linkend: bssgp:bss_ctx_status.
XRef to nonexistent id: bssgp:bss_ctx_status
Error: no ID for constraint linkend: sgsn_llc:dl_bytes.
XRef to nonexistent id: sgsn_llc:dl_bytes
Error: no ID for constraint linkend: sgsn_llc:ul_bytes.
XRef to nonexistent id: sgsn_llc:ul_bytes
Error: no ID for constraint linkend: sgsn_llc:dl_packets.
XRef to nonexistent id: sgsn_llc:dl_packets
Error: no ID for constraint linkend: sgsn_llc:ul_packets.
XRef to nonexistent id: sgsn_llc:ul_packets
Error: no ID for constraint linkend: sgsn_gprs:attach_requested.
XRef to nonexistent id: sgsn_gprs:attach_requested
Error: no ID for constraint linkend: sgsn_gprs:attach_accepted.
XRef to nonexistent id: sgsn_gprs:attach_accepted
Error: no ID for constraint linkend: sgsn_gprs:attach_rejected.
XRef to nonexistent id: sgsn_gprs:attach_rejected
Error: no ID for constraint linkend: sgsn_gprs:detach_requested.
XRef to nonexistent id: sgsn_gprs:detach_requested
Error: no ID for constraint linkend: sgsn_gprs:detach_acked.
XRef to nonexistent id: sgsn_gprs:detach_acked
Error: no ID for constraint linkend: sgsn_gprs:routing_area_requested.
XRef to nonexistent id: sgsn_gprs:routing_area_requested
Error: no ID for constraint linkend: sgsn_gprs:routing_area_requested.
XRef to nonexistent id: sgsn_gprs:routing_area_requested
Error: no ID for constraint linkend: sgsn_gprs:routing_area_requested.
XRef to nonexistent id: sgsn_gprs:routing_area_requested
Error: no ID for constraint linkend: sgsn_pdp:activate_requested.
XRef to nonexistent id: sgsn_pdp:activate_requested
Error: no ID for constraint linkend: sgsn_pdp:activate_rejected.
XRef to nonexistent id: sgsn_pdp:activate_rejected
Error: no ID for constraint linkend: sgsn_pdp:activate_accepted.
XRef to nonexistent id: sgsn_pdp:activate_accepted
Error: no ID for constraint linkend: sgsn_pdp:request_activated.
XRef to nonexistent id: sgsn_pdp:request_activated
Error: no ID for constraint linkend: sgsn_pdp:request_activate_rejected.
XRef to nonexistent id: sgsn_pdp:request_activate_rejected
Error: no ID for constraint linkend: sgsn_pdp:modify_requested.
XRef to nonexistent id: sgsn_pdp:modify_requested
Error: no ID for constraint linkend: sgsn_pdp:modify_accepted.
XRef to nonexistent id: sgsn_pdp:modify_accepted
Error: no ID for constraint linkend: sgsn_pdp:dl_deactivate_requested.
XRef to nonexistent id: sgsn_pdp:dl_deactivate_requested
Error: no ID for constraint linkend: sgsn_pdp:dl_deactivate_accepted.
XRef to nonexistent id: sgsn_pdp:dl_deactivate_accepted
Error: no ID for constraint linkend: sgsn_pdp:ul_deactivate_requested.
XRef to nonexistent id: sgsn_pdp:ul_deactivate_requested
Error: no ID for constraint linkend: sgsn_pdp:ul_deactivate_accepted.
XRef to nonexistent id: sgsn_pdp:ul_deactivate_accepted
Error: no ID for constraint linkend: ns:nsvc_packets:in.
XRef to nonexistent id: ns:nsvc_packets:in
Error: no ID for constraint linkend: ns:nsvc_packets:out.
XRef to nonexistent id: ns:nsvc_packets:out
Error: no ID for constraint linkend: ns:nsvc_bytes:in.
XRef to nonexistent id: ns:nsvc_bytes:in
Error: no ID for constraint linkend: ns:nsvc_bytes:out.
XRef to nonexistent id: ns:nsvc_bytes:out
Error: no ID for constraint linkend: ns:nsvc_blocked.
XRef to nonexistent id: ns:nsvc_blocked
Error: no ID for constraint linkend: ns:nsvc_dead.
XRef to nonexistent id: ns:nsvc_dead
Error: no ID for constraint linkend: ns:nsvc_replaced.
XRef to nonexistent id: ns:nsvc_replaced
Error: no ID for constraint linkend: ns:nsvc_nsei-chg.
XRef to nonexistent id: ns:nsvc_nsei-chg
Error: no ID for constraint linkend: ns:nsvc_inv-nsvci.
XRef to nonexistent id: ns:nsvc_inv-nsvci
Error: no ID for constraint linkend: ns:nsvc_inv-nsei.
XRef to nonexistent id: ns:nsvc_inv-nsei
Error: no ID for constraint linkend: ns:nsvc_lost:alive.
XRef to nonexistent id: ns:nsvc_lost:alive
Error: no ID for constraint linkend: ns:nsvc_lost:reset.
XRef to nonexistent id: ns:nsvc_lost:reset
Error: no ID for constraint linkend: ns.nsvc_alive.delay.
XRef to nonexistent id: ns.nsvc_alive.delay
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Image 'dblatex' not found
rsvg-convert -a -f pdf -o fig0.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__1.svg
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
rsvg-convert -a -f pdf -o fig1.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__2.svg
rsvg-convert -a -f pdf -o fig2.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__3.svg
rsvg-convert -a -f pdf -o fig3.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__4.svg
rsvg-convert -a -f pdf -o fig4.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__5.svg
rsvg-convert -a -f pdf -o fig5.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__6.svg
rsvg-convert -a -f pdf -o fig6.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__7.svg
rsvg-convert -a -f pdf -o fig7.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__8.svg
rsvg-convert -a -f pdf -o fig8.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__9.svg
rsvg-convert -a -f pdf -o fig9.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__10.svg
rsvg-convert -a -f pdf -o fig10.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__11.svg
rsvg-convert -a -f pdf -o fig11.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__12.svg
rsvg-convert -a -f pdf -o fig12.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__13.svg
rsvg-convert -a -f pdf -o fig13.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__14.svg
rsvg-convert -a -f pdf -o fig14.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__15.svg
rsvg-convert -a -f pdf -o fig15.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__16.svg
rsvg-convert -a -f pdf -o fig16.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__17.svg
rsvg-convert -a -f pdf -o fig17.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__18.svg
rsvg-convert -a -f pdf -o fig18.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__19.svg
rsvg-convert -a -f pdf -o fig19.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__20.svg
rsvg-convert -a -f pdf -o fig20.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__21.svg
rsvg-convert -a -f pdf -o fig21.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__22.svg
rsvg-convert -a -f pdf -o fig22.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__23.svg
rsvg-convert -a -f pdf -o fig23.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__24.svg
rsvg-convert -a -f pdf -o fig24.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__25.svg
rsvg-convert -a -f pdf -o fig25.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__26.svg
rsvg-convert -a -f pdf -o fig26.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__27.svg
rsvg-convert -a -f pdf -o fig27.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__28.svg
rsvg-convert -a -f pdf -o fig28.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__29.svg
rsvg-convert -a -f pdf -o fig29.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__30.svg
rsvg-convert -a -f pdf -o fig30.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__31.svg
rsvg-convert -a -f pdf -o fig31.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__32.svg
rsvg-convert -a -f pdf -o fig32.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__33.svg
rsvg-convert -a -f pdf -o fig33.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__34.svg
rsvg-convert -a -f pdf -o fig34.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__35.svg
rsvg-convert -a -f pdf -o fig35.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__36.svg
rsvg-convert -a -f pdf -o fig36.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__37.svg
rsvg-convert -a -f pdf -o fig37.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__38.svg
rsvg-convert -a -f pdf -o fig38.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__39.svg
rsvg-convert -a -f pdf -o fig39.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__40.svg
rsvg-convert -a -f pdf -o fig40.pdf /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual__41.svg
Build osmosgsn-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmosgsn-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpe184o4ls/osmosgsn-usermanual.idx is empty
osmosgsn-usermanual.aux MD5 checksum changed
osmosgsn-usermanual.toc MD5 checksum changed
the /tmp/tmpe184o4ls/osmosgsn-usermanual.aux file has changed
pdflatex -interaction=batchmode osmosgsn-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpe184o4ls/osmosgsn-usermanual.idx is empty
osmosgsn-usermanual.aux MD5 checksum changed
the /tmp/tmpe184o4ls/osmosgsn-usermanual.aux file has changed but no re-run required?
no new compilation is needed
running last-compilation scripts...
'osmosgsn-usermanual.pdf' successfully built
a2x: deleting /build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals/osmosgsn-usermanual.xml
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc'
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make[1]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make[1]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
Making dvi in include
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
Making dvi in osmocom
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
Making dvi in gtphub
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/gtphub'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/gtphub'
Making dvi in sgsn
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/sgsn'
make[4]: Nothing to be done for 'dvi'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/sgsn'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[4]: Nothing to be done for 'dvi-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
Making dvi in src
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
Making dvi in gprs
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gprs'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gprs'
Making dvi in sgsn
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/sgsn'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/sgsn'
Making dvi in gtphub
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gtphub'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gtphub'
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
Making dvi in contrib
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
Making dvi in systemd
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib/systemd'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib/systemd'
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
Making dvi in tests
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
Making dvi in gprs
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs'
Making dvi in gtphub
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gtphub'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gtphub'
Making dvi in gprs_routing_area
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs_routing_area'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs_routing_area'
Making dvi in sgsn
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sgsn'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sgsn'
Making dvi in xid
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/xid'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/xid'
Making dvi in sndcp_xid
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sndcp_xid'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sndcp_xid'
Making dvi in slhc
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/slhc'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/slhc'
Making dvi in v42bis
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/v42bis'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/v42bis'
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
Making dvi in doc
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc'
Making dvi in examples
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/examples'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/examples'
Making dvi in manuals
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals'
make[3]: Nothing to be done for 'dvi'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc/manuals'
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc'
make[3]: Nothing to be done for 'dvi-am'.
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc'
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/doc'
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make[2]: Nothing to be done for 'dvi-am'.
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make[1]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make[1]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make check-recursive
make[2]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
Making check in include
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
Making check in osmocom
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
Making check in gtphub
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/gtphub'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/gtphub'
Making check in sgsn
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/sgsn'
make[5]: Nothing to be done for 'check'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom/sgsn'
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[5]: Nothing to be done for 'check-am'.
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include/osmocom'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/include'
Making check in src
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
Making check in gprs
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gprs'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gprs'
Making check in sgsn
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/sgsn'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/sgsn'
Making check in gtphub
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gtphub'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src/gtphub'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/src'
Making check in contrib
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
Making check in systemd
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib/systemd'
make[4]: Nothing to be done for 'check'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib/systemd'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
make[4]: Nothing to be done for 'check-am'.
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/contrib'
Making check in tests
make[3]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
Making check in gprs
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs'
make gprs_test
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs'
CC gprs_test.o
CC gprs_utils.o
CCLD gprs_test
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs'
Making check in gtphub
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gtphub'
make gtphub_test
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gtphub'
CC gtphub_test.o
CCLD gtphub_test
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gtphub'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gtphub'
Making check in gprs_routing_area
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs_routing_area'
make gprs_routing_area_test
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs_routing_area'
CC gprs_routing_area_test.o
CCLD gprs_routing_area_test
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs_routing_area'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/gprs_routing_area'
Making check in sgsn
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sgsn'
make sgsn_test
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sgsn'
CC sgsn_test.o
CC gprs_gb_parse.o
CCLD sgsn_test
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sgsn'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sgsn'
Making check in xid
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/xid'
make xid_test
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/xid'
CC xid_test.o
CCLD xid_test
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/xid'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/xid'
Making check in sndcp_xid
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sndcp_xid'
make sndcp_xid_test
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sndcp_xid'
CC sndcp_xid_test.o
CCLD sndcp_xid_test
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sndcp_xid'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/sndcp_xid'
Making check in slhc
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/slhc'
make slhc_test
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/slhc'
CC slhc_test.o
CCLD slhc_test
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/slhc'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/slhc'
Making check in v42bis
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/v42bis'
make v42bis_test
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/v42bis'
CC v42bis_test.o
CCLD v42bis_test
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/v42bis'
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests/v42bis'
make[4]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make check-local
make[5]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
/bin/bash '../../../tests/testsuite'
## ------------------------------------ ##
## osmo-sgsn 1.12.0.37-944b test suite. ##
## ------------------------------------ ##
Regression tests.
1: gprs ok
2: sgsn ok
3: gprs_routing_area ok
4: gtphub ok
5: xid ok
6: sndcp_xid ok
7: slhc ok
8: v42bis ok
## ------------- ##
## Test results. ##
## ------------- ##
All 8 tests were successful.
make python-tests
make[6]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make vty-test
make[7]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make vty-python-test
make[8]: Entering directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
osmotestvty.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
test_history (__main__.TestVTY.test_history) ... confpath /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.., workdir /build/osmo-sgsn-1.12.0.37-944b/_build/sub
Running tests for specific VTY commands
Launch: ./src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg from /build/osmo-sgsn-1.12.0.37-944b/_build/sub
Opening /dev/null
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub './src/sgsn/osmo-sgsn' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg'
> ls -l /proc/119827/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4251 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4245 0.0.0.0:*
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119827 54.5 0.0 27932 23332 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119828 0.0 0.0 285504 14520 ? S 14:10 0:00 ./src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg
build 119835 0.0 0.0 2576 948 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119837 0.0 0.0 3700 1800 ? S 14:10 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43524), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43524), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg from /build/osmo-sgsn-1.12.0.37-944b/_build/sub
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub './src/sgsn/osmo-sgsn' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg'
> ls -l /proc/119827/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4251 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4245 0.0.0.0:*
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119827 3.8 0.0 27932 23332 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119838 0.0 0.0 285504 14436 ? S 14:10 0:00 ./src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg
build 119845 0.0 0.0 2576 940 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119847 0.0 0.0 3700 1872 ? S 14:10 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43536), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43536), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
Launch: ./src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg from /build/osmo-sgsn-1.12.0.37-944b/_build/sub
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub './src/sgsn/osmo-sgsn' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg'
> ls -l /proc/119827/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4251 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4245 0.0.0.0:*
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119827 1.9 0.0 27932 23332 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119848 0.0 0.0 285504 14448 ? S 14:10 0:00 ./src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg
build 119855 0.0 0.0 2576 924 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119857 0.0 0.0 3700 1820 ? S 14:10 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 4.380s
OK
Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43544), raddr=('127.0.0.1', 4245)> (1 sockets open)
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43544), raddr=('127.0.0.1', 4245)> (0 sockets open)
Terminating took 0.897s
Process returned code: 0
osmotestconfig.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
Verifying src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub 'src/sgsn/osmo-sgsn' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg'
> ls -l /proc/119858/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4245 0.0.0.0:*
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119858 54.5 0.0 28052 23316 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119859 0.0 0.0 21848 14516 ? D 14:10 0:00 src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../tests/osmo-sgsn.cfg
build 119866 0.0 0.0 2576 912 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119868 0.0 0.0 3700 1820 ? S 14:10 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43558), raddr=('127.0.0.1', 4245)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43558), raddr=('127.0.0.1', 4245)> (0 sockets open)
Verifying src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-sgsn.cfgmpso6x8n, test write_config
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub 'src/sgsn/osmo-sgsn' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-sgsn.cfgmpso6x8n'
> ls -l /proc/119858/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4245 0.0.0.0:*
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119858 3.0 0.0 28036 23828 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119869 0.0 0.0 21848 14516 ? D 14:10 0:00 src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-sgsn.cfgmpso6x8n
build 119876 0.0 0.0 2576 932 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119878 0.0 0.0 3700 1788 ? S 14:10 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43568), raddr=('127.0.0.1', 4245)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43568), raddr=('127.0.0.1', 4245)> (0 sockets open)
Verifying src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-sgsn.cfgmpso6x8n, test token_vty_command
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub 'src/sgsn/osmo-sgsn' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-sgsn.cfgmpso6x8n'
> ls -l /proc/119858/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4251 0.0.0.0:*
LISTEN 0 10 127.0.0.1:4245 0.0.0.0:*
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119858 1.5 0.0 28036 23828 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119879 0.0 0.0 285504 14496 ? S 14:10 0:00 src/sgsn/osmo-sgsn -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-sgsn.cfgmpso6x8n
build 119886 0.0 0.0 2576 936 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119888 0.0 0.0 3700 1764 ? S 14:10 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 33334), raddr=('127.0.0.1', 4245)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4245 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 33334), raddr=('127.0.0.1', 4245)> (0 sockets open)
Verifying src/gtphub/osmo-gtphub -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg, test verify_doc
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub 'src/gtphub/osmo-gtphub' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg'
> ls -l /proc/119858/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4253 0.0.0.0:*
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119858 1.2 0.0 28036 23828 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119889 0.0 0.0 12904 6324 ? S 14:10 0:00 src/gtphub/osmo-gtphub -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../../doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg
build 119896 0.0 0.0 2576 956 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119898 0.0 0.0 3700 1800 ? S 14:10 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52352), raddr=('127.0.0.1', 4253)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52352), raddr=('127.0.0.1', 4253)> (0 sockets open)
Verifying src/gtphub/osmo-gtphub -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-gtphub-1iface.cfgj1ekz4m7, test write_config
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub 'src/gtphub/osmo-gtphub' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-gtphub-1iface.cfgj1ekz4m7'
> ls -l /proc/119858/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4253 0.0.0.0:*
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119858 1.0 0.0 28184 23828 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119899 0.0 0.0 12904 6264 ? D 14:10 0:00 src/gtphub/osmo-gtphub -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-gtphub-1iface.cfgj1ekz4m7
build 119906 0.0 0.0 2576 932 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119908 0.0 0.0 3700 1860 ? S 14:10 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52354), raddr=('127.0.0.1', 4253)> (1 sockets open)
Terminating took 0.897s
Process returned code: 0
Socket: closing 127.0.0.1:4253 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52354), raddr=('127.0.0.1', 4253)> (0 sockets open)
Verifying src/gtphub/osmo-gtphub -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-gtphub-1iface.cfgj1ekz4m7, test token_vty_command
Launching: PWD=/build/osmo-sgsn-1.12.0.37-944b/_build/sub 'src/gtphub/osmo-gtphub' '-c' '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-gtphub-1iface.cfgj1ekz4m7'
> ls -l /proc/119858/fd
total 0
lr-x------ 1 build build 64 Feb 12 14:10 0 -> pipe:[3799878039]
l-wx------ 1 build build 64 Feb 12 14:10 1 -> pipe:[3799878040]
l-wx------ 1 build build 64 Feb 12 14:10 2 -> pipe:[3799878041]
l-wx------ 1 build build 64 Feb 12 14:10 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ps xua | grep osmo
build 112962 0.0 0.0 3924 3116 ? S 14:09 0:00 /bin/bash -c test -d osmo-sgsn-1.12.0.37-944b/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-sgsn-1.12.0.37-944b/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-sgsn-1.12.0.37-944b.tar.gz osmo-sgsn-1.12.0.37-944b.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1
build 117393 0.0 0.0 3924 3060 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src contrib tests doc ' ;; \ *) list='include src contrib tests doc ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 117433 0.0 0.0 3924 3028 ? S 14:10 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ *) list='gprs gtphub gprs_routing_area sgsn xid sndcp_xid slhc v42bis ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail"
build 119858 0.9 0.0 28184 23828 ? S 14:10 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/osmo-sgsn-1.12.0.37-944b/_build/sub/../.. -w /build/osmo-sgsn-1.12.0.37-944b/_build/sub -v
build 119909 0.0 0.0 12236 6324 ? D 14:10 0:00 src/gtphub/osmo-gtphub -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-gtphub-1iface.cfgj1ekz4m7
build 119916 0.0 0.0 2576 880 ? S 14:10 0:00 /bin/sh -c ps xua | grep osmo
build 119918 0.0 0.0 3700 1760 ? S 14:10 0:00 grep osmo
Failed to verify src/gtphub/osmo-gtphub -c /build/osmo-sgsn-1.12.0.37-944b/_build/sub/writtenconfig/osmo-gtphub-1iface.cfgj1ekz4m7
Current directory: /build/osmo-sgsn-1.12.0.37-944b/_build/sub
Error was [Errno 111] Connection refused
Config was
!
! OsmoGTPhub (1.12.0.37-944b) configuration saved from vty
!!
!
log stderr
logging filter all 1
logging color 1
logging print category-hex 0
logging print category 1
logging print thread-id 0
logging timestamp 0
logging print level 1
logging print file basename last
logging level gtphub info
logging level lglobal notice
logging level llapd notice
logging level linp notice
logging level lmux notice
logging level lmi notice
logging level lmib notice
logging level lsms notice
logging level lctrl notice
logging level lgtp notice
logging level lstats notice
logging level lgsup notice
logging level loap notice
logging level lss7 notice
logging level lsccp notice
logging level lsua notice
logging level lm3ua notice
logging level lmgcp notice
logging level ljibuf notice
logging level lrspro notice
logging level lns notice
logging level lbssgp notice
logging level lnsdata notice
logging level lnssignal notice
logging level liuup notice
logging level lpfcp notice
logging level lcsn1 notice
logging level lio notice
!
line vty
no login
!
gtphub
bind-to-sgsns ctrl 127.0.0.1 12123 user 127.0.0.1 12153
grx-dns-add 192.168.0.1
bind-to-ggsns 127.0.0.1
sgsn-proxy 127.0.0.4
ggsn-proxy ctrl 127.0.0.3 2123 user 127.0.0.5 2152
grx-dns-add 192.168.0.1
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Connecting socket failed, retrying...
Terminating took 2.013s
Process returned code: 0
Socket: closing 127.0.0.1:4253 <socket.socket fd=5, family=2, type=1, proto=0, laddr=('0.0.0.0', 52642)> (0 sockets open)
Traceback (most recent call last):
File "/usr/local/bin/osmotestconfig.py", line 4, in <module>
__import__('pkg_resources').run_script('osmopython==0.3.0', 'osmotestconfig.py')
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 708, in run_script
self.require(requires)[0].run_script(script_name, ns)
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 1517, in run_script
exec(code, namespace, namespace)
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 192, in <module>
sys.exit(test_all_apps(apps, configs, ignore_configs=ignores,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 153, in test_all_apps
test_config(app, config, tmpdir, verbose)
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 36, in test_config
if test_config_atest(app_desc, newconfig, token_vty_command, verbose) > 0:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 60, in test_config_atest
raise se
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 53, in test_config_atest
ret = run_test(vty)
^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 95, in token_vty_command
vty.command("help")
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/osmopy/obscvty.py", line 222, in command
return self._common_command(request, close)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/osmopy/obscvty.py", line 175, in _common_command
self._connect_socket()
File "/usr/local/lib/python3.11/dist-packages/osmopython-0.3.0-py3.11.egg/osmopy/obscvty.py", line 82, in _connect_socket
self.socket.connect((self.host, self.port))
ConnectionRefusedError: [Errno 111] Connection refused
make[8]: *** [Makefile:713: vty-python-test] Error 1
make[8]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[7]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[7]: *** [Makefile:729: vty-test] Error 2
make[6]: *** [Makefile:706: python-tests] Error 2
make[6]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[5]: *** [Makefile:738: check-local] Error 2
make[5]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[4]: *** [Makefile:566: check-am] Error 2
make[4]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[3]: *** [Makefile:416: check-recursive] Error 1
make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub/tests'
make[2]: *** [Makefile:459: check-recursive] Error 1
make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make[1]: *** [Makefile:758: check] Error 2
make[1]: Leaving directory '/build/osmo-sgsn-1.12.0.37-944b/_build/sub'
make: *** [Makefile:678: distcheck] Error 1
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
$ ssh-agent -k
unset SSH_AUTH_SOCK;
unset SSH_AGENT_PID;
echo Agent pid 779594 killed;
[ssh-agent] Stopped.
Archiving artifacts
Sending e-mails to: jenkins-notifications@lists.osmocom.org laforge@gnumonks.org
Finished: FAILURE
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
