Skipping 184 KB.. Full Log

20251125060025823 DL1C NOTICE (bts=0,trx=3,ts=4) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060025823 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060025823 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060025823 DOML NOTICE OC=CHANNEL(03) INST=(00,03,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060025823 DL1C NOTICE (bts=0,trx=3,ts=5) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251125060025823 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060025823 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060025823 DOML NOTICE OC=CHANNEL(03) INST=(00,03,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060025823 DL1C NOTICE (bts=0,trx=3,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060025823 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060025823 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060025823 DOML NOTICE OC=CHANNEL(03) INST=(00,03,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060025823 DL1C NOTICE (bts=0,trx=3,ts=7) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251125060025823 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060025823 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060025824 DOML NOTICE OC=CHANNEL(03) INST=(00,03,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060025824 DOML NOTICE OC=GPRS-NSE(f0) INST=(00,ff,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:223)
20251125060025824 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RXTUNE 1782000' (trx_if.c:268)
20251125060025824 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD TXTUNE 1877000' (trx_if.c:268)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251125060025824 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060025824 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251125060025824 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:124 (BTS@127.0.0.1:5700) Recv RXTUNE cmd
20251125060025824 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack other-trx (trx_provision_fsm.c:511)
20251125060025824 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251125060025824 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251125060025824 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack other-trx (trx_provision_fsm.c:511)
20251125060025824 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETTSC
20251125060025824 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251125060025824 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETTSC
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETTSC
20251125060025824 DTRX INFO phy0.0: Response message: 'RSP RXTUNE 0 1782000' (trx_if.c:687)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060025824 DTRX INFO phy0.1: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251125060025824 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
[DEBUG] ctrl_if_trx.py:131 (BTS@127.0.0.1:5700) Recv TXTUNE cmd
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060025824 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable other-trx (trx_provision_fsm.c:511)
20251125060025824 DTRX INFO phy0.2: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251125060025824 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060025824 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable other-trx (trx_provision_fsm.c:511)
20251125060025824 DTRX INFO phy0.0: Response message: 'RSP TXTUNE 0 1877000' (trx_if.c:687)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251125060025824 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060025824 DTRX INFO phy0.3: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251125060025824 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc-ack nomtxpower-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETTSC
20251125060025824 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable other-trx (trx_provision_fsm.c:511)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack other-trx (trx_provision_fsm.c:511)
20251125060025824 DTRX INFO phy0.0: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: nomtxpower-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:215 (BTS@127.0.0.1:5700) Recv NOMTXPOWER cmd
20251125060025824 DTRX INFO phy0.0: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: state_chg to OPEN_WAIT_POWERON_CNF (trx_provision_fsm.c:509)
20251125060025824 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWERON' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:97 (BTS@127.0.0.1:5700) Recv POWERON CMD
[INFO] ctrl_if_trx.py:109 (BTS@127.0.0.1:5700) Starting transceiver...
[INFO] transceiver.py:273 Starting clock generator
20251125060025824 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060025824 DTRX INFO phy0.0: Response message: 'RSP POWERON 0' (trx_if.c:687)
20251125060025824 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_WAIT_POWERON_CNF}: Received Event TRX_PROV_EV_POWERON_CNF (trx_provision_fsm.c:56)
20251125060025825 DL1C NOTICE GSM clock started, waiting for clock indications (scheduler_trx.c:491)
20251125060025825 DL1C INFO phy0: PHY link state change connecting -> connected (phy_link.c:58)
20251125060025825 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_WAIT_POWERON_CNF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:549)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 0 5' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 1 1' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 2 1' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 3 1' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 4 8' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 5 3' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 6 7' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251125060025825 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251125060025825 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETRXGAIN
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 0 1' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 1 7' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 2 13' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 3 8' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 4 1' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 5 7' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETRXGAIN
20251125060025825 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
20251125060025825 DTRX INFO phy0.1: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
20251125060025825 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 0 5' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060025825 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,01,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060025825 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 0 1' (trx_if.c:687)
20251125060025825 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 1 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060025825 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 1 7' (trx_if.c:687)
20251125060025825 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 2 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060025825 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 2 13' (trx_if.c:687)
20251125060025825 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251125060025825 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 0 3' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 1 13' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 2 7' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 3 13' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 4 7' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 5 1' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060025825 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251125060025825 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 3 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060025825 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,02,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060025826 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 3 8' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETRXGAIN
20251125060025826 DTRX INFO phy0.2: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060025826 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251125060025826 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 0 13' (trx_if.c:268)
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 1 3' (trx_if.c:268)
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 2 3' (trx_if.c:268)
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 3 7' (trx_if.c:268)
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 4 13' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 5 1' (trx_if.c:268)
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251125060025826 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 7 7' (trx_if.c:268)
20251125060025826 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 4 8' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060025826 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 4 1' (trx_if.c:687)
20251125060025826 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETRXGAIN
20251125060025826 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 0 3' (trx_if.c:687)
20251125060025826 DTRX INFO phy0.3: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060025826 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 5 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060025826 DOML NOTICE OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060025826 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 5 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060025826 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 1 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060025826 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 6 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060025826 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060025826 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 0 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 2 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 1 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 3 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 2 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 4 7' (trx_if.c:687)
20251125060025827 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 3 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 5 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060025827 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
20251125060025827 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 4 13' (trx_if.c:687)
20251125060025827 DLINP ERROR CLICONN(ts-0-2-rsl-trx0,){CONNECTING} connect failed (-111) (stream_cli.c:424)
20251125060025827 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060025827 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
20251125060025827 DLINP ERROR SRVCONN(ts-0-1-oml,r=127.0.0.1:36109<->l=127.0.0.11:3002) lost connection with client (-104) (stream_srv.c:767)
20251125060025828 DLINP NOTICE E1TS(0:1) failed reading from socket: -104 (ipaccess.c:554)
20251125060025828 DOML NOTICE BTS_SHUTDOWN(bts0)[0x512000004720]{NONE}: Shutting down BTS, exit 0, reason: Abis close (bts_shutdown_fsm.c:268)
20251125060025828 DLINP NOTICE E1L(0) Signalling link down (bts_ipaccess_nanobts.c:778)
20251125060025828 DLINP NOTICE (bts=0) Dropping OML link: link down (bts_ipaccess_nanobts.c:543)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060025828 DLMI ERROR (bts=0,trx=0) Lost E1 OML link (osmo_bsc_main.c:487)
20251125060025828 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251125060025828 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251125060025828 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251125060025828 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251125060025828 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251125060025828 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251125060025828 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251125060025828 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251125060025828 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251125060025828 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
[DEBUG] ctrl_if_trx.py:220 (TRX1@127.0.0.1:5700/1) Recv RFMUTE cmd
20251125060025828 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251125060025828 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWEROFF' (trx_if.c:268)
20251125060025828 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251125060025828 DLMI ERROR (bts=0,trx=0) Lost E1 OSMO link (osmo_bsc_main.c:487)
20251125060025828 DOML NOTICE BTS_SHUTDOWN(bts0)[0x512000004720]{WAIT_TRX_CLOSED}: BTS is already being shutdown. (bts_shutdown_fsm.c:261)
20251125060025828 DABIS ERROR abis_link(abis_link)[0x512000008da0]{WAIT_RECONNECT}: transition to state WAIT_RECONNECT not permitted! (abis.c:267)
[DEBUG] ctrl_if_trx.py:220 (BTS@127.0.0.1:5700) Recv RFMUTE cmd
20251125060025828 DTRX INFO phy0.1: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251125060025828 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
20251125060025828 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 5 1' (trx_if.c:687)
20251125060025828 DTRX INFO phy0.0: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (TRX2@127.0.0.1:5700/2) Recv RFMUTE cmd
[DEBUG] ctrl_if_trx.py:115 (BTS@127.0.0.1:5700) Recv POWEROFF cmd
[INFO] ctrl_if_trx.py:117 (BTS@127.0.0.1:5700) Stopping transceiver...
20251125060025828 DTRX INFO phy0.2: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
[INFO] transceiver.py:276 Stopping clock generator
20251125060025829 DTRX INFO phy0.0: Response message: 'RSP POWEROFF 0' (trx_if.c:687)
20251125060025829 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_WAIT_POWEROFF_CNF}: Received Event TRX_PROV_EV_POWEROFF_CNF (trx_provision_fsm.c:59)
20251125060025829 DL1C NOTICE GSM clock stopped (scheduler_trx.c:510)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060025829 DTRX NOTICE phy0.0: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251125060025829 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state ACTIVE -> NONE (lchan.c:291)
20251125060025829 DTRX NOTICE phy0.1: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251125060025829 DTRX NOTICE phy0.2: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251125060025829 DTRX NOTICE phy0.3: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251125060025829 DL1C INFO phy0: PHY link state change connected -> shutdown (phy_link.c:58)
20251125060025829 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251125060025830 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251125060025830 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
20251125060025830 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251125060025830 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
20251125060025830 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251125060025830 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
[testenv][generic] + ['podman', 'exec', '-e', 'CCACHE_DIR=/home/osmocom-build/ccache/testenv', '-e', 'TESTENV_CACHE_DIR=/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/_cache', '-e', 'TESTENV_SRC_DIR=/home/osmocom-build/jenkins/workspace', '-e', 'TESTENV_INSTALL_DIR=/', '-e', 'TERM=dumb', '-e', 'PATH=/opt/eclipse-titan-11.1.0/bin:/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/_testenv/data/scripts:/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/_testenv/data/scripts/qemu:/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/bts:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin', '-e', 'HOME=/home/osmocom-build', '-e', 'PYTHONUNBUFFERED=1', '-e', 'BUILDDIR=/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/_cache/podman/titan-11.1.0-debian-trixie', '-e', 'TTCN3_DIR=/opt/eclipse-titan-11.1.0', '-e', 'TTCN3_PCAP_PATH=/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/logs/generic/testsuite', '-e', 'OSMO_SUT_HOST=127.0.0.1', '-e', 'OSMO_SUT_PORT=4241', '-w', '/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/logs/generic/testsuite', 'testenv-bts-all-osmocom-nightly-asan-20251125-0600-5c07c898-0', '/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/start-testsuite.sh', 'bts/BTS_Tests', 'BTS_Tests.cfg']
ttcn3_start: Starting the test suite
spawn /opt/eclipse-titan-11.1.0/bin/mctr_cli BTS_Tests.cfg

*************************************************************************
* TTCN-3 Test Executor - Main Controller 2                              *
* Version: 11.1.0                                                       *
* Copyright (c) 2000-2025 Ericsson Telecom AB                           *
* All rights reserved. This program and the accompanying materials      *
* are made available under the terms of the Eclipse Public License v2.0 *
* which accompanies this distribution, and is available at              *
* https://www.eclipse.org/org/documents/epl-2.0/EPL-2.0.html            *
*************************************************************************

Using configuration file: BTS_Tests.cfg
MC@d4e8699cf43b: Unix server socket created successfully.
MC@d4e8699cf43b: Listening on TCP port 44859.
MC2> d4e8699cf43b is the default
spawn /home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/_cache/podman/titan-11.1.0-debian-trixie/bts/BTS_Tests d4e8699cf43b 44859
TTCN-3 Host Controller (parallel mode), version 11.1.0
MC@d4e8699cf43b: New HC connected from 10.0.2.100 [10.0.2.100]. d4e8699cf43b: Linux 6.1.0-13-amd64 on x86_64.
cmtc
MC@d4e8699cf43b: Downloading configuration file to all HCs.
construct junitlogger
Initializing `JUnitLogger' (v2.0): JUnitLogger writes JUnit-compatible XML
HC@d4e8699cf43b: Warning: Option `FileMask' was given more than once in section [LOGGING] of the configuration file.
HC@d4e8699cf43b: Warning: Option `FileMask' was given more than once in section [LOGGING] of the configuration file.
HC@d4e8699cf43b: Warning: Option `FileMask' was given more than once in section [LOGGING] of the configuration file.
HC@d4e8699cf43b: Warning: Option `FileMask' was given more than once in section [LOGGING] of the configuration file.
MC@d4e8699cf43b: Configuration file was processed on all HCs.
MC@d4e8699cf43b: Creating MTC on host 10.0.2.100.
MC@d4e8699cf43b: MTC is created.
MC2> smtc
Executing all items of [EXECUTE] section.
MC2> MTC@d4e8699cf43b: Starting external command `/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/ttcn3-tcpdump-start.sh BTS_Tests.TC_est_dchan'.
------ BTS_Tests.TC_est_dchan ------
Tue Nov 25 06:00:26 UTC 2025
/usr/bin/dumpcap -q -s 1520 -n -i any -w "/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/logs/generic/testsuite/BTS_Tests.TC_est_dchan.pcap" >/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/logs/generic/testsuite/BTS_Tests.TC_est_dchan.pcap.stdout 2>/tmp/cmderr &
Waiting for packet dumper to start... 0
[testenv][generic] Looking for a coredump file
[testenv][generic] trxcon unexpected exit during BTS_Tests.TC_est_dchan! rc=0
[testenv][generic] Waiting until test has stopped...
MTC@d4e8699cf43b: External command `/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/ttcn3-tcpdump-start.sh BTS_Tests.TC_est_dchan' was executed successfully (exit status: 0).
MTC@d4e8699cf43b: Test case TC_est_dchan started.
MTC@d4e8699cf43b: "TC_est_dchan() start"
20251125060027393 DLGLOBAL NOTICE TTCN3 f_logp(): TC_est_dchan() start (logging_vty.c:1172)
20251125060030026 DLINP ERROR CLICONN(asp-clnt-msc-0,){CONNECTING} connect failed (-111) (stream_cli.c:424)
20251125060030029 DLSCCP ERROR 0: SCCP(rctx=0) MTP-TRANSFER.req from SCCP for OPC=187=0.23.3,DPC=185=0.23.1,SLS=11: no route! (sccp_scrc.c:177)
20251125060030029 DLSCCP NOTICE 0: SCCP(rctx=0) SCRC Routing Failure (MTP failure) for CL message CL:CLDT (sccp_sclc.c:399)
20251125060030030 DMSC DEBUG N-NOTICE.ind(00 04 30 04 01 20 ) (osmo_bsc_sigtran.c:348)
20251125060030030 DMSC NOTICE (msc=0) (calling_addr=RI=2,PC=185,SSN=254) N-NOTICE.ind cause=5='MTP failure' importance=0 (osmo_bsc_sigtran.c:168)
20251125060030829 DABIS NOTICE A-bis connection establishment to BSC (127.0.0.11) in progress... (abis.c:170)
20251125060030829 DLINP NOTICE E1TS(0:1) enabling ipaccess BTS mode, OML connecting to 127.0.0.11:3002 (ipaccess.c:1078)
20251125060030831 DLINP NOTICE received ID_GET for unit ID 1234/0/0 (ipaccess.c:893)
20251125060030831 DL1C INFO phy0: PHY link state change shutdown -> connecting (phy_link.c:58)
20251125060030834 DTRX NOTICE phy0.0: Opening TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1283)
20251125060030835 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{CLOSED}: Received Event TRX_PROV_EV_OPEN (trx_if.c:1363)
20251125060030835 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWEROFF' (trx_if.c:268)
20251125060030835 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{CLOSED}: state_chg to OPEN_POWEROFF (trx_provision_fsm.c:363)
20251125060030835 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:115 (BTS@127.0.0.1:5700) Recv POWEROFF cmd
[INFO] ctrl_if_trx.py:117 (BTS@127.0.0.1:5700) Stopping transceiver...
20251125060030837 DTRX NOTICE phy0.1: Opening TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1283)
20251125060030837 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{CLOSED}: Received Event TRX_PROV_EV_OPEN (trx_if.c:1363)
20251125060030837 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{CLOSED}: state_chg to OPEN_POWEROFF (trx_provision_fsm.c:363)
20251125060030837 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:220 (TRX1@127.0.0.1:5700/1) Recv RFMUTE cmd
20251125060030838 DTRX NOTICE phy0.2: Opening TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1283)
20251125060030838 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{CLOSED}: Received Event TRX_PROV_EV_OPEN (trx_if.c:1363)
20251125060030838 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{CLOSED}: state_chg to OPEN_POWEROFF (trx_provision_fsm.c:363)
20251125060030838 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:220 (TRX2@127.0.0.1:5700/2) Recv RFMUTE cmd
20251125060030838 DTRX NOTICE phy0.3: Opening TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1283)
20251125060030838 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{CLOSED}: Received Event TRX_PROV_EV_OPEN (trx_if.c:1363)
20251125060030838 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{CLOSED}: state_chg to OPEN_POWEROFF (trx_provision_fsm.c:363)
20251125060030838 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:220 (TRX3@127.0.0.1:5700/3) Recv RFMUTE cmd
20251125060030839 DTRX INFO phy0.0: Response message: 'RSP POWEROFF 0' (trx_if.c:687)
20251125060030839 DTRX INFO phy0.1: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251125060030839 DTRX INFO phy0.2: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251125060030839 DTRX INFO phy0.3: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251125060030839 DTRX INFO phy0.0: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (BTS@127.0.0.1:5700) Recv RFMUTE cmd
20251125060030847 DOML ERROR OC=GPRS-CELL INST=(00,00,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251125060030847 DNM ERROR OC=GPRS-CELL(f1) INST=(00,00,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251125060030847 DOML NOTICE OC=GPRS-CELL(f1) INST=(00,00,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030848 DOML ERROR OC=RADIO-CARRIER INST=(00,00,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251125060030848 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,00,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251125060030849 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,00,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030849 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
20251125060030849 DTRX INFO phy0.0: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (BTS@127.0.0.1:5700) Recv RFMUTE cmd
20251125060030850 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,00,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
20251125060030850 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
20251125060030850 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
20251125060030850 DL1C NOTICE (bts=0,trx=0,ts=0) Configured multiframe with 'BCCH+CCCH+SDCCH/4+SACCH/4' (scheduler.c:1024)
20251125060030850 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating FCCH (scheduler.c:1070)
20251125060030850 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating SCH (scheduler.c:1070)
20251125060030850 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating BCCH (scheduler.c:1070)
20251125060030850 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating RACH (scheduler.c:1070)
20251125060030850 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating CCCH (scheduler.c:1070)
20251125060030850 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state NONE -> ACTIVE (lchan.c:291)
20251125060030850 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030850 DTRX INFO phy0.0: Requesting TRXD PDU version 2 (trx_if.c:296)
20251125060030850 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251125060030850 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack setformat-ack (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:182 (BTS@127.0.0.1:5700) Recv SETFORMAT cmd
[WARNING] ctrl_if_trx.py:196 (BTS@127.0.0.1:5700) Requested TRXD header version 2 is not supported, suggesting 1...
20251125060030851 DOML NOTICE OC=CHANNEL(03) INST=(00,00,00): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030851 DTRX INFO phy0.0: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
20251125060030851 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251125060030851 DTRX INFO phy0.0: Requesting TRXD PDU version 1 (trx_if.c:296)
20251125060030851 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251125060030851 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack setformat-ack (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:182 (BTS@127.0.0.1:5700) Recv SETFORMAT cmd
[INFO] ctrl_if_trx.py:201 (BTS@127.0.0.1:5700) TRXD header version 1 -> 1
20251125060030851 DTRX INFO phy0.0: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251125060030851 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251125060030851 DTRX INFO phy0.0: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251125060030851 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030851 DL1C NOTICE (bts=0,trx=0,ts=1) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251125060030851 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030851 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030851 DOML NOTICE OC=CHANNEL(03) INST=(00,00,01): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030852 DL1C NOTICE (bts=0,trx=0,ts=2) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251125060030852 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030852 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030852 DOML NOTICE OC=CHANNEL(03) INST=(00,00,02): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030853 DL1C NOTICE (bts=0,trx=0,ts=3) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251125060030853 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030853 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030853 DOML NOTICE OC=CHANNEL(03) INST=(00,00,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030853 DL1C NOTICE (bts=0,trx=0,ts=4) Configured multiframe with 'NONE' (scheduler.c:1024)
20251125060030853 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030853 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030854 DOML NOTICE OC=CHANNEL(03) INST=(00,00,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030854 DL1C NOTICE (bts=0,trx=0,ts=5) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251125060030854 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030854 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030854 DOML NOTICE OC=CHANNEL(03) INST=(00,00,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030854 DL1C NOTICE (bts=0,trx=0,ts=6) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251125060030854 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030854 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030854 DOML NOTICE OC=CHANNEL(03) INST=(00,00,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030855 DL1C NOTICE (bts=0,trx=0,ts=7) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030855 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030855 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030855 DOML NOTICE OC=CHANNEL(03) INST=(00,00,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030855 DOML ERROR OC=RADIO-CARRIER INST=(00,01,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251125060030855 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,01,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251125060030855 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:245)
20251125060030855 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RXTUNE 1782400' (trx_if.c:268)
20251125060030855 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD TXTUNE 1877400' (trx_if.c:268)
20251125060030855 DTRX INFO phy0.1: Requesting TRXD PDU version 2 (trx_if.c:296)
20251125060030855 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251125060030855 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc rxtune-ack txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030856 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,01,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030856 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
20251125060030856 DTRX INFO phy0.1: Response message: 'RSP RXTUNE 0 1782400' (trx_if.c:687)
20251125060030856 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251125060030856 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:124 (TRX1@127.0.0.1:5700/1) Recv RXTUNE cmd
20251125060030856 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,01,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
20251125060030856 DTRX INFO phy0.1: Response message: 'RSP TXTUNE 0 1877400' (trx_if.c:687)
20251125060030856 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251125060030856 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251125060030856 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030856 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,01,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
[DEBUG] ctrl_if_trx.py:131 (TRX1@127.0.0.1:5700/1) Recv TXTUNE cmd
[DEBUG] ctrl_if_trx.py:182 (TRX1@127.0.0.1:5700/1) Recv SETFORMAT cmd
[WARNING] ctrl_if_trx.py:196 (TRX1@127.0.0.1:5700/1) Requested TRXD header version 2 is not supported, suggesting 1...
20251125060030856 DTRX INFO phy0.1: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
20251125060030856 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251125060030856 DTRX INFO phy0.1: Requesting TRXD PDU version 1 (trx_if.c:296)
20251125060030856 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251125060030856 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030856 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,01,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
20251125060030856 DL1C NOTICE (bts=0,trx=1,ts=0) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251125060030856 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030856 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030857 DTRX INFO phy0.1: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (TRX1@127.0.0.1:5700/1) Recv RFMUTE cmd
20251125060030857 DOML NOTICE OC=CHANNEL(03) INST=(00,01,00): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030857 DTRX INFO phy0.1: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251125060030857 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251125060030857 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:215 (TRX1@127.0.0.1:5700/1) Recv NOMTXPOWER cmd
20251125060030857 DL1C NOTICE (bts=0,trx=1,ts=1) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251125060030857 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030857 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030857 DTRX INFO phy0.1: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251125060030857 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251125060030857 DTRX INFO phy0.1: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251125060030857 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:182 (TRX1@127.0.0.1:5700/1) Recv SETFORMAT cmd
[INFO] ctrl_if_trx.py:201 (TRX1@127.0.0.1:5700/1) TRXD header version 1 -> 1
20251125060030857 DOML NOTICE OC=CHANNEL(03) INST=(00,01,01): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030857 DL1C NOTICE (bts=0,trx=1,ts=2) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030857 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030857 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030857 DOML NOTICE OC=CHANNEL(03) INST=(00,01,02): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030858 DL1C NOTICE (bts=0,trx=1,ts=3) Configured multiframe with 'NONE' (scheduler.c:1024)
20251125060030858 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030858 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030858 DOML NOTICE OC=CHANNEL(03) INST=(00,01,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030858 DL1C NOTICE (bts=0,trx=1,ts=4) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251125060030858 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030858 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030858 DOML NOTICE OC=CHANNEL(03) INST=(00,01,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030858 DL1C NOTICE (bts=0,trx=1,ts=5) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251125060030858 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030858 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030858 DOML NOTICE OC=CHANNEL(03) INST=(00,01,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030859 DL1C NOTICE (bts=0,trx=1,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030859 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030859 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030859 DOML NOTICE OC=CHANNEL(03) INST=(00,01,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030859 DL1C NOTICE (bts=0,trx=1,ts=7) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030859 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030859 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030859 DOML NOTICE OC=CHANNEL(03) INST=(00,01,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030859 DOML ERROR OC=RADIO-CARRIER INST=(00,02,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251125060030859 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,02,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:245)
20251125060030860 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RXTUNE 1782800' (trx_if.c:268)
20251125060030860 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD TXTUNE 1877800' (trx_if.c:268)
20251125060030860 DTRX INFO phy0.2: Requesting TRXD PDU version 2 (trx_if.c:296)
20251125060030860 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc rxtune-ack txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030860 DTRX INFO phy0.2: Response message: 'RSP RXTUNE 0 1782800' (trx_if.c:687)
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:124 (TRX2@127.0.0.1:5700/2) Recv RXTUNE cmd
20251125060030860 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,02,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030860 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
20251125060030860 DTRX INFO phy0.2: Response message: 'RSP TXTUNE 0 1877800' (trx_if.c:687)
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251125060030860 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:131 (TRX2@127.0.0.1:5700/2) Recv TXTUNE cmd
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:182 (TRX2@127.0.0.1:5700/2) Recv SETFORMAT cmd
20251125060030860 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,02,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
[WARNING] ctrl_if_trx.py:196 (TRX2@127.0.0.1:5700/2) Requested TRXD header version 2 is not supported, suggesting 1...
20251125060030860 DTRX INFO phy0.2: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251125060030860 DTRX INFO phy0.2: Requesting TRXD PDU version 1 (trx_if.c:296)
20251125060030860 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030860 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,02,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
[DEBUG] ctrl_if_trx.py:220 (TRX2@127.0.0.1:5700/2) Recv RFMUTE cmd
20251125060030860 DTRX INFO phy0.2: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
20251125060030860 DTRX INFO phy0.2: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251125060030860 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
[DEBUG] ctrl_if_trx.py:215 (TRX2@127.0.0.1:5700/2) Recv NOMTXPOWER cmd
20251125060030861 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030861 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,02,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
20251125060030861 DL1C NOTICE (bts=0,trx=2,ts=0) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251125060030861 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030861 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:182 (TRX2@127.0.0.1:5700/2) Recv SETFORMAT cmd
[INFO] ctrl_if_trx.py:201 (TRX2@127.0.0.1:5700/2) TRXD header version 1 -> 1
20251125060030861 DTRX INFO phy0.2: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251125060030861 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251125060030861 DTRX INFO phy0.2: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251125060030861 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030861 DOML NOTICE OC=CHANNEL(03) INST=(00,02,00): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030861 DL1C NOTICE (bts=0,trx=2,ts=1) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030862 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030862 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030862 DOML NOTICE OC=CHANNEL(03) INST=(00,02,01): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030862 DL1C NOTICE (bts=0,trx=2,ts=2) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251125060030862 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030862 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030862 DOML NOTICE OC=CHANNEL(03) INST=(00,02,02): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030863 DL1C NOTICE (bts=0,trx=2,ts=3) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030863 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030863 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030863 DOML NOTICE OC=CHANNEL(03) INST=(00,02,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030864 DL1C NOTICE (bts=0,trx=2,ts=4) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251125060030864 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030864 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030864 DOML NOTICE OC=CHANNEL(03) INST=(00,02,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030865 DL1C NOTICE (bts=0,trx=2,ts=5) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251125060030865 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030865 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030865 DOML NOTICE OC=CHANNEL(03) INST=(00,02,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030865 DL1C NOTICE (bts=0,trx=2,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030865 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030865 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030866 DOML NOTICE OC=CHANNEL(03) INST=(00,02,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030866 DL1C NOTICE (bts=0,trx=2,ts=7) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030867 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030867 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030867 DOML NOTICE OC=CHANNEL(03) INST=(00,02,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030868 DOML ERROR OC=RADIO-CARRIER INST=(00,03,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251125060030868 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,03,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251125060030868 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:245)
20251125060030868 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RXTUNE 1783200' (trx_if.c:268)
20251125060030868 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD TXTUNE 1878200' (trx_if.c:268)
20251125060030868 DTRX INFO phy0.3: Requesting TRXD PDU version 2 (trx_if.c:296)
20251125060030869 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251125060030869 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc rxtune-ack txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030869 DTRX INFO phy0.3: Response message: 'RSP RXTUNE 0 1783200' (trx_if.c:687)
20251125060030869 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251125060030869 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:124 (TRX3@127.0.0.1:5700/3) Recv RXTUNE cmd
20251125060030869 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,03,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030869 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:131 (TRX3@127.0.0.1:5700/3) Recv TXTUNE cmd
20251125060030869 DTRX INFO phy0.3: Response message: 'RSP TXTUNE 0 1878200' (trx_if.c:687)
20251125060030869 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251125060030869 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251125060030869 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030869 DTRX INFO phy0.3: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:182 (TRX3@127.0.0.1:5700/3) Recv SETFORMAT cmd
20251125060030869 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
[WARNING] ctrl_if_trx.py:196 (TRX3@127.0.0.1:5700/3) Requested TRXD header version 2 is not supported, suggesting 1...
20251125060030869 DTRX INFO phy0.3: Requesting TRXD PDU version 1 (trx_if.c:296)
20251125060030869 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251125060030869 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:220 (TRX3@127.0.0.1:5700/3) Recv RFMUTE cmd
20251125060030870 DTRX INFO phy0.3: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:215 (TRX3@127.0.0.1:5700/3) Recv NOMTXPOWER cmd
20251125060030870 DTRX INFO phy0.3: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251125060030870 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251125060030870 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251125060030870 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,03,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
[DEBUG] ctrl_if_trx.py:182 (TRX3@127.0.0.1:5700/3) Recv SETFORMAT cmd
[INFO] ctrl_if_trx.py:201 (TRX3@127.0.0.1:5700/3) TRXD header version 1 -> 1
20251125060030870 DTRX INFO phy0.3: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251125060030870 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251125060030870 DTRX INFO phy0.3: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251125060030870 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030870 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
20251125060030871 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
20251125060030871 DL1C NOTICE (bts=0,trx=3,ts=0) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030871 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030871 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030871 DOML NOTICE OC=CHANNEL(03) INST=(00,03,00): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030872 DL1C NOTICE (bts=0,trx=3,ts=1) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251125060030872 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030872 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030872 DOML NOTICE OC=CHANNEL(03) INST=(00,03,01): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030872 DL1C NOTICE (bts=0,trx=3,ts=2) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251125060030872 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030872 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030873 DOML NOTICE OC=CHANNEL(03) INST=(00,03,02): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030873 DL1C NOTICE (bts=0,trx=3,ts=3) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251125060030873 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030873 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030873 DOML NOTICE OC=CHANNEL(03) INST=(00,03,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030873 DL1C NOTICE (bts=0,trx=3,ts=4) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030873 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030873 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030874 DOML NOTICE OC=CHANNEL(03) INST=(00,03,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030874 DL1C NOTICE (bts=0,trx=3,ts=5) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251125060030874 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030874 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030874 DOML NOTICE OC=CHANNEL(03) INST=(00,03,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030875 DL1C NOTICE (bts=0,trx=3,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251125060030875 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030875 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030875 DOML NOTICE OC=CHANNEL(03) INST=(00,03,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030876 DL1C NOTICE (bts=0,trx=3,ts=7) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251125060030876 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251125060030876 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251125060030876 DOML NOTICE OC=CHANNEL(03) INST=(00,03,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'GPRS' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'EGPRS' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'HOPPING' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'MULTI_TSC' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'OML_ALERTS' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'CBCH' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_V1' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_H_V1' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_EFR' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_AMR' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_H_AMR' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ETWS_PN' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'PAGING_COORDINATION' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'IPV6_NSVC' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ACCH_REP' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'CCN' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VAMOS' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ABIS_OSMO_PCU' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'BCCH_PWR_RED' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'DYN_TS_SDCCH8' is supported (abis_nm.c:599)
20251125060030877 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ACCH_TEMP_OVP' is supported (abis_nm.c:599)
20251125060030878 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'OSMUX' is supported (abis_nm.c:599)
20251125060030878 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VBS' is supported (abis_nm.c:599)
20251125060030878 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VGCS' is supported (abis_nm.c:599)
20251125060030878 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'TWTS001' is supported (abis_nm.c:599)
20251125060030878 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'TWTS002' is supported (abis_nm.c:599)
20251125060030878 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): ARI reported sw[0/2]: osmobts is 1.9.0.8-7db7.202511242029~asan (abis_nm.c:652)
20251125060030878 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Reported variant: osmo-bts-trx (abis_nm.c:534)
20251125060030878 DOML NOTICE OC=GPRS-NSE(f0) INST=(00,ff,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030879 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251125060030879 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030879 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030879 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251125060030879 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251125060030880 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,01,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030880 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251125060030880 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251125060030880 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,02,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030881 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251125060030881 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251125060030881 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251125060030881 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:223)
20251125060030881 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RXTUNE 1782000' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD TXTUNE 1877000' (trx_if.c:268)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251125060030882 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030882 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251125060030882 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
20251125060030882 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251125060030882 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:124 (BTS@127.0.0.1:5700) Recv RXTUNE cmd
20251125060030882 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
20251125060030882 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251125060030882 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETTSC
20251125060030882 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
20251125060030882 DTRX INFO phy0.0: Response message: 'RSP RXTUNE 0 1782000' (trx_if.c:687)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETTSC
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETTSC
[DEBUG] ctrl_if_trx.py:131 (BTS@127.0.0.1:5700) Recv TXTUNE cmd
20251125060030882 DTRX INFO phy0.1: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251125060030882 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030882 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 0 1' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 1 7' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 2 13' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 3 8' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 4 1' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 5 7' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251125060030882 DTRX INFO phy0.0: Response message: 'RSP TXTUNE 0 1877000' (trx_if.c:687)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251125060030882 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030882 DTRX INFO phy0.2: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251125060030882 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251125060030882 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251125060030883 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251125060030883 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 0 3' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 1 13' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 2 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETRXGAIN
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 3 13' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 4 7' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 5 1' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETTSC
20251125060030883 DTRX INFO phy0.3: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251125060030883 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251125060030883 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251125060030883 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack other-trx (trx_provision_fsm.c:511)
20251125060030883 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 0 13' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETRXGAIN
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 1 3' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 2 3' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 3 7' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 4 13' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 5 1' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 7 7' (trx_if.c:268)
20251125060030883 DTRX INFO phy0.0: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251125060030883 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251125060030883 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Delay poweron, wait for: nomtxpower-ack other-trx (trx_provision_fsm.c:511)
20251125060030883 DTRX INFO phy0.1: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
20251125060030883 DTRX INFO phy0.2: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETRXGAIN
20251125060030884 DTRX INFO phy0.3: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:215 (BTS@127.0.0.1:5700) Recv NOMTXPOWER cmd
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060030884 DTRX INFO phy0.0: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060030884 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251125060030884 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWEROFF}: state_chg to OPEN_WAIT_POWERON_CNF (trx_provision_fsm.c:509)
20251125060030884 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWERON' (trx_if.c:268)
20251125060030884 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 0 1' (trx_if.c:687)
20251125060030884 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 0 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:97 (BTS@127.0.0.1:5700) Recv POWERON CMD
[INFO] ctrl_if_trx.py:109 (BTS@127.0.0.1:5700) Starting transceiver...
[INFO] transceiver.py:273 Starting clock generator
20251125060030884 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 0 13' (trx_if.c:687)
20251125060030885 DTRX INFO phy0.0: Response message: 'RSP POWERON 0' (trx_if.c:687)
20251125060030885 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_WAIT_POWERON_CNF}: Received Event TRX_PROV_EV_POWERON_CNF (trx_provision_fsm.c:56)
20251125060030885 DL1C NOTICE GSM clock started, waiting for clock indications (scheduler_trx.c:491)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060030885 DL1C INFO phy0: PHY link state change connecting -> connected (phy_link.c:58)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060030885 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_WAIT_POWERON_CNF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:549)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 0 5' (trx_if.c:268)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 1 1' (trx_if.c:268)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 2 1' (trx_if.c:268)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 3 1' (trx_if.c:268)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 4 8' (trx_if.c:268)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 5 3' (trx_if.c:268)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 6 7' (trx_if.c:268)
20251125060030885 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETRXGAIN
20251125060030885 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 1 7' (trx_if.c:687)
20251125060030885 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 1 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060030885 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 1 3' (trx_if.c:687)
20251125060030885 DTRX INFO phy0.0: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060030885 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 2 13' (trx_if.c:687)
20251125060030886 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 2 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060030886 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 2 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060030886 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 0 5' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060030886 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 3 8' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060030886 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 3 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060030886 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 3 7' (trx_if.c:687)
20251125060030886 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 1 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060030886 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 4 1' (trx_if.c:687)
20251125060030886 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 4 7' (trx_if.c:687)
20251125060030886 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 4 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060030886 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 2 1' (trx_if.c:687)
20251125060030886 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 5 7' (trx_if.c:687)
20251125060030886 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 5 1' (trx_if.c:687)
20251125060030886 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 5 1' (trx_if.c:687)
20251125060030886 DOML NOTICE OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060030886 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 3 1' (trx_if.c:687)
20251125060030887 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
20251125060030887 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
20251125060030887 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060030887 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 4 8' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251125060030887 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251125060030887 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251125060030887 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 7 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060030888 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 5 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060030888 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 6 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251125060030888 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
[DEBUG] clck_gen.py:128 IND CLOCK 0
20251125060030889 DTRX INFO phy0.0: Clock indication: fn=0 (trx_if.c:138)
20251125060030889 DL1C INFO TRX Clock Ind: elapsed_us=66578630195614, elapsed_fn=  0, error_us=+66578630195614 (scheduler_trx.c:566)
20251125060030889 DL1C INFO GSM clock jitter: -66578630195614us (elapsed_fn=0) (scheduler_trx.c:585)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: Established a new IPA connection (conn_id=2)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Tx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_UNITID (8) } } } }
TC_est_dchan-RSL(4)@d4e8699cf43b: A new IPA/RSL connection has been established (conn_id=2), waiting for IDENTITY RESPONSE...
20251125060030892 DLINP NOTICE received ID_GET for unit ID 1234/0/0 (ipaccess.c:893)
20251125060030892 DRSL INFO (bts=0,trx=0) RSL link up (bts_trx.c:234)
20251125060030892 DL1C INFO (bts=0,trx=0) power_ramp_start(cur=0, tgt=30000) (tx_power.c:250)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: Established a new IPA connection (conn_id=3)
20251125060030893 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Tx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_UNITID (8) } } } }
20251125060030893 DRSL DEBUG (bts=0,trx=0) ACC RAMP: nm_obj=RADIO-CARRIER running=1 (acc.c:443)
20251125060030893 DRSL DEBUG (bts=0,trx=0) ACC RAMP: ignoring state change because TRX is not usable (acc.c:453)
20251125060030893 DRSL DEBUG (bts=0,trx=0) ACC RAMP: nm_obj=BASEBAND-TRANSCEIVER running=1 (acc.c:443)
TC_est_dchan-RSL(4)@d4e8699cf43b: A new IPA/RSL connection has been established (conn_id=3), waiting for IDENTITY RESPONSE...
20251125060030893 DLINP NOTICE received ID_GET for unit ID 1234/0/1 (ipaccess.c:893)
20251125060030894 DRSL INFO (bts=0,trx=1) RSL link up (bts_trx.c:234)
20251125060030894 DL1C INFO (bts=0,trx=1) power_ramp_start(cur=0, tgt=30000) (tx_power.c:250)
20251125060030894 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: Established a new IPA connection (conn_id=4)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Tx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_UNITID (8) } } } }
TC_est_dchan-RSL(4)@d4e8699cf43b: A new IPA/RSL connection has been established (conn_id=4), waiting for IDENTITY RESPONSE...
20251125060030895 DLINP NOTICE received ID_GET for unit ID 1234/0/2 (ipaccess.c:893)
20251125060030895 DRSL INFO (bts=0,trx=2) RSL link up (bts_trx.c:234)
20251125060030895 DL1C INFO (bts=0,trx=2) power_ramp_start(cur=0, tgt=30000) (tx_power.c:250)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Rx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O } } } }
20251125060030896 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: IPA ID RESP: { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O } }
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_est_dchan-RSL(4)@d4e8699cf43b: Got IDENTITY RESPONSE (conn_id=2): { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O } }
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_est_dchan-RSL(4)@d4e8699cf43b: Warning: dec_IpaUnitId(): Data remained at the end of the stream after successful decoding: '00'O
TC_est_dchan-RSL(4)@d4e8699cf43b: Mapped TRX#0 to TCP/IP conn_id=2
MTC@d4e8699cf43b: 1/4 transceiver(s) connected
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: Established a new IPA connection (conn_id=5)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Tx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_UNITID (8) } } } }
20251125060030900 DLINP NOTICE received ID_GET for unit ID 1234/0/3 (ipaccess.c:893)
20251125060030900 DRSL INFO (bts=0,trx=3) RSL link up (bts_trx.c:234)
20251125060030900 DL1C INFO (bts=0,trx=3) power_ramp_start(cur=0, tgt=30000) (tx_power.c:250)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Rx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3100'O } } } }
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: IPA ID RESP: { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3100'O } }
20251125060030900 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_est_dchan-RSL(4)@d4e8699cf43b: A new IPA/RSL connection has been established (conn_id=5), waiting for IDENTITY RESPONSE...
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_est_dchan-RSL(4)@d4e8699cf43b: Got IDENTITY RESPONSE (conn_id=3): { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3100'O } }
TC_est_dchan-RSL(4)@d4e8699cf43b: Warning: dec_IpaUnitId(): Data remained at the end of the stream after successful decoding: '00'O
TC_est_dchan-RSL(4)@d4e8699cf43b: Mapped TRX#1 to TCP/IP conn_id=3
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Rx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3200'O } } } }
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: IPA ID RESP: { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3200'O } }
MTC@d4e8699cf43b: 1/4 RF Resource Indication(s) received
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
MTC@d4e8699cf43b: 2/4 transceiver(s) connected
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_est_dchan-RSL(4)@d4e8699cf43b: Got IDENTITY RESPONSE (conn_id=4): { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3200'O } }
MTC@d4e8699cf43b: 2/4 RF Resource Indication(s) received
TC_est_dchan-RSL(4)@d4e8699cf43b: Warning: dec_IpaUnitId(): Data remained at the end of the stream after successful decoding: '00'O
TC_est_dchan-RSL(4)@d4e8699cf43b: Mapped TRX#2 to TCP/IP conn_id=4
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Rx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3300'O } } } }
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: IPA ID RESP: { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3300'O } }
MTC@d4e8699cf43b: 3/4 transceiver(s) connected
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_est_dchan-RSL(4)@d4e8699cf43b: Got IDENTITY RESPONSE (conn_id=5): { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3300'O } }
MTC@d4e8699cf43b: 3/4 RF Resource Indication(s) received
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_est_dchan-RSL(4)@d4e8699cf43b: Warning: dec_IpaUnitId(): Data remained at the end of the stream after successful decoding: '00'O
TC_est_dchan-RSL(4)@d4e8699cf43b: Mapped TRX#3 to TCP/IP conn_id=5
MTC@d4e8699cf43b: 4/4 transceiver(s) connected
MTC@d4e8699cf43b: 4/4 RF Resource Indication(s) received
[DEBUG] clck_gen.py:128 IND CLOCK 102
20251125060031360 DTRX INFO phy0.0: Clock indication: fn=102 (trx_if.c:138)
20251125060031360 DL1C INFO TRX Clock Ind: elapsed_us= 470934, elapsed_fn=102, error_us= +204 (scheduler_trx.c:566)
20251125060031360 DL1C NOTICE GSM clock skew: old fn=0, new fn=102 (scheduler_trx.c:580)
20251125060031365 DL1P NOTICE PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251125060031365 DL1P NOTICE PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251125060031365 DL1P NOTICE GSMTAP: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251125060031393 DL1P NOTICE PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251125060031393 DL1P NOTICE PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251125060031393 DL1P NOTICE GSMTAP: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251125060031411 DL1P NOTICE PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251125060031411 DL1P NOTICE PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251125060031411 DL1P NOTICE GSMTAP: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
MTC@d4e8699cf43b: Setting RSL_SYSTEM_INFO_3 (3): { header := { l2_plen := { l2_plen := 18, zero_one := '01'B }, skip_indicator := 0, rr_protocol_discriminator := 6, message_type := SYSTEM_INFORMATION_TYPE_3 (27) }, payload := { si3 := { cell_id := 23, lai := { mcc_mnc := '262F42'H, lac := 42 }, ctrl_chan_desc := { msc_r99 := true, att := true, bs_ag_blks_res := 1, ccch_conf := CCHAN_DESC_1CCCH_COMBINED (1), si22ind := false, cbq3 := CBQ3_IU_MODE_NOT_SUPPORTED (0), spare := '00'B, bs_pa_mfrms := 0, t3212 := 1 }, cell_options := { dn_ind := false, pwrc := false, dtx := MS_MAY_USE_UL_DTX (0), radio_link_tout_div4 := 7 }, cell_sel_par := { cell_resel_hyst_2dB := 2, ms_txpwr_max_cch := 7, acs := '0'B, neci := true, rxlev_access_min := 0 }, rach_control := { max_retrans := RACH_MAX_RETRANS_7 (3), tx_integer := '1001'B, cell_barr_access := false, re_not_allowed := true, acc := '0000010000000000'B }, rest_octets := { sel_params := { presence := '0'B, params := omit }, pwr_offset := { presence := '0'B, offset := omit }, si_2ter_ind := '0'B, early_cm_ind := '0'B, sched_where := { presence := '0'B, where := omit }, gprs_ind := { presence := '1'B, ind := { ra_colour := 0, si13_pos := '0'B } }, umts_early_cm_ind := '0'B, si2_quater_ind := { presence := '0'B, ind := omit }, iu_mode_ind := omit, si21_ind := { presence := '0'B, pos := omit } } } } }
MTC@d4e8699cf43b: Setting RSL_SYSTEM_INFO_3 (3): '49061B001762F224002AC90001074740E504002C2B2B2B'O
MTC@d4e8699cf43b: Setting RSL_SYSTEM_INFO_2 (2): { header := { l2_plen := { l2_plen := 22, zero_one := '01'B }, skip_indicator := 0, rr_protocol_discriminator := 6, message_type := SYSTEM_INFORMATION_TYPE_2 (26) }, payload := { si2 := { bcch_freq_list := '00000000000000000000000000000000'O, ncc_permitted := '11111111'B, rach_control := { max_retrans := RACH_MAX_RETRANS_7 (3), tx_integer := '1001'B, cell_barr_access := false, re_not_allowed := true, acc := '0000010000000000'B } } } }
MTC@d4e8699cf43b: Setting RSL_SYSTEM_INFO_2 (2): '59061A00000000000000000000000000000000FFE50400'O
MTC@d4e8699cf43b: Setting RSL_SYSTEM_INFO_4 (4): { header := { l2_plen := { l2_plen := 12, zero_one := '01'B }, skip_indicator := 0, rr_protocol_discriminator := 6, message_type := SYSTEM_INFORMATION_TYPE_4 (28) }, payload := { si4 := { lai := { mcc_mnc := '262F42'H, lac := 42 }, cell_sel_par := { cell_resel_hyst_2dB := 2, ms_txpwr_max_cch := 7, acs := '0'B, neci := true, rxlev_access_min := 0 }, rach_control := { max_retrans := RACH_MAX_RETRANS_7 (3), tx_integer := '1001'B, cell_barr_access := false, re_not_allowed := true, acc := '0000010000000000'B }, cbch_chan_desc := omit, cbch_mobile_alloc := omit, rest_octets := { sel_params := { presence := '0'B, params := omit }, pwr_offset := { presence := '0'B, offset := omit }, gprs_ind := { presence := '1'B, ind := { ra_colour := 0, si13_pos := '0'B } }, s_presence := '0'B, s := omit } } } }
MTC@d4e8699cf43b: Setting RSL_SYSTEM_INFO_4 (4): '31061C62F224002A4740E50400012B2B2B2B2B2B2B2B2B'O
20251125060031438 DRSL INFO (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO (rsl.c:3964)
20251125060031438 DRSL INFO  Rx RSL BCCH INFO (SI3, 23 bytes) (rsl.c:614)
20251125060031438 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state ACTIVE -> NONE (lchan.c:291)
20251125060031439 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Deactivating BCCH (scheduler.c:1070)
20251125060031439 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD NOHANDOVER 0 4' (trx_if.c:268)
20251125060031439 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating BCCH (scheduler.c:1070)
20251125060031439 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state NONE -> ACTIVE (lchan.c:291)
20251125060031439 DPCU NOTICE Disabling GPRS Indicator in SI (No PCU connected) (sysinfo.c:206)
[DEBUG] fake_trx.py:273 (BTS@127.0.0.1:5700) Recv FAKE_TOA cmd
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD NOHANDOVER
20251125060031439 DPCU NOTICE PCU socket not connected, dropping message (pcu_sock.c:1040)
20251125060031439 DPCU NOTICE Failed to send SI3 to PCU: rc=-5 (pcu_sock.c:830)
20251125060031439 DPAG INFO Paging SI update (paging.c:837)
20251125060031439 DRSL INFO Updated AGCH max queue length to 12 (bts.c:512)
20251125060031439 DTRX INFO phy0.0: Response message: 'RSP NOHANDOVER 0 0 4' (trx_if.c:687)
20251125060031440 DRSL INFO (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO (rsl.c:3964)
20251125060031440 DRSL INFO  Rx RSL BCCH INFO (SI2, 23 bytes) (rsl.c:614)
20251125060031440 DPCU NOTICE PCU socket not connected, dropping message (pcu_sock.c:1040)
20251125060031440 DPCU NOTICE Failed to send SI2 to PCU: rc=-5 (pcu_sock.c:830)
20251125060031440 DPAG INFO Paging SI update (paging.c:837)
20251125060031440 DRSL INFO (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO (rsl.c:3964)
20251125060031440 DRSL INFO  Rx RSL BCCH INFO (SI4, 23 bytes) (rsl.c:614)
20251125060031440 DPAG INFO Paging SI update (paging.c:837)
MTC@d4e8699cf43b: Warning: dec_TrxcMessage(): Data remained at the end of the stream after successful decoding: '00'O
[DEBUG] fake_trx.py:292 (BTS@127.0.0.1:5700) Recv FAKE_RSSI cmd
MTC@d4e8699cf43b: Warning: dec_TrxcMessage(): Data remained at the end of the stream after successful decoding: '00'O
[DEBUG] fake_trx.py:317 (BTS@127.0.0.1:5700) Recv FAKE_CI cmd
MTC@d4e8699cf43b: Warning: dec_TrxcMessage(): Data remained at the end of the stream after successful decoding: '00'O
TC_est_dchan(6)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(6)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(6)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(7)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(7)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(7)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(8)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(8)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(8)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(9)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(9)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(9)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(10)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(10)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(10)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(11)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(11)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(11)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(12)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(12)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(12)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(13)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(13)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(13)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(14)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(14)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(14)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(15)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(15)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(15)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(16)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(16)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(16)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(17)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(17)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(17)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(18)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(18)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(18)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(19)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(19)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(19)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(20)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(20)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(20)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(21)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(21)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(21)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(22)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(22)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(22)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(23)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(23)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(23)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(24)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(24)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(24)@d4e8699cf43b: Final verdict of PTC: error
TC_est_dchan(25)@d4e8699cf43b: Dynamic test case error: Stand-alone receive statement failed in file L1CTL_PortType.ttcn, line 283.
TC_est_dchan(25)@d4e8699cf43b: setverdict(error): none -> error
TC_est_dchan(25)@d4e8699cf43b: Final verdict of PTC: error
MTC@d4e8699cf43b: Stopping testcase execution from "BTS_Tests.ttcn":9057
20251125060031582 DLINP NOTICE CLICONN(ts-0-2-rsl-trx0,r=127.0.0.2:3003<->l=127.0.0.1:44849){CONNECTED} connection closed with srv (stream_cli.c:548)
TC_est_dchan-RSL(4)@d4e8699cf43b: Final verdict of PTC: none
20251125060031582 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
20251125060031582 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
20251125060031582 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
20251125060031582 DLINP NOTICE SRVCONN(ts-0-1-oml,r=127.0.0.1:38821<->l=127.0.0.11:3002) connection closed with client (stream_srv.c:770)
20251125060031582 DLINP NOTICE E1TS(0:1) failed reading from socket: 0 (ipaccess.c:554)
20251125060031582 DLINP NOTICE E1L(0) Signalling link down (bts_ipaccess_nanobts.c:778)
20251125060031582 DLINP NOTICE (bts=0) Dropping OML link: link down (bts_ipaccess_nanobts.c:543)
20251125060031582 DLMI ERROR (bts=0,trx=0) Lost E1 OML link (osmo_bsc_main.c:487)
20251125060031583 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
20251125060031583 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
TC_est_dchan-RSL-IPA(3)@d4e8699cf43b: Final verdict of PTC: none
IPA-CTRL-CLI-IPA(5)@d4e8699cf43b: Final verdict of PTC: none
20251125060031583 DOML NOTICE BTS_SHUTDOWN(bts0)[0x512000004720]{NONE}: Shutting down BTS, exit 0, reason: Abis close (bts_shutdown_fsm.c:268)
20251125060031584 DL1C INFO (bts=0,trx=0) power_ramp_start(cur=0, tgt=-10000, bypass) (tx_power.c:250)
20251125060031584 DL1C INFO (bts=0,trx=0) ramping TRX board output power to -10000 mdBm. (tx_power.c:181)
20251125060031584 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETPOWER 60' (trx_if.c:268)
20251125060031584 DL1C INFO (bts=0,trx=1) power_ramp_start(cur=0, tgt=-10000, bypass) (tx_power.c:250)
20251125060031584 DL1C INFO (bts=0,trx=1) ramping TRX board output power to -10000 mdBm. (tx_power.c:181)
20251125060031584 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETPOWER 60' (trx_if.c:268)
MTC@d4e8699cf43b: Setting final verdict of the test case.
MTC@d4e8699cf43b: Local verdict of MTC: none
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan-RSL-IPA(3): none (none -> none)
20251125060031584 DL1C INFO (bts=0,trx=2) power_ramp_start(cur=0, tgt=-10000, bypass) (tx_power.c:250)
20251125060031584 DL1C INFO (bts=0,trx=2) ramping TRX board output power to -10000 mdBm. (tx_power.c:181)
20251125060031584 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETPOWER 60' (trx_if.c:268)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan-RSL(4): none (none -> none)
20251125060031584 DL1C INFO (bts=0,trx=3) power_ramp_start(cur=0, tgt=-10000, bypass) (tx_power.c:250)
20251125060031584 DL1C INFO (bts=0,trx=3) ramping TRX board output power to -10000 mdBm. (tx_power.c:181)
20251125060031584 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETPOWER 60' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (BTS@127.0.0.1:5700) Recv SETPOWER cmd
MTC@d4e8699cf43b: Local verdict of PTC IPA-CTRL-CLI-IPA(5): none (none -> none)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(6): error (none -> error)
20251125060031584 DOML NOTICE BTS_SHUTDOWN(bts0)[0x512000004720]{WAIT_RAMP_DOWN_COMPL}: BTS is already being shutdown. (bts_shutdown_fsm.c:261)
20251125060031584 DABIS ERROR abis_link(abis_link)[0x512000008da0]{WAIT_RECONNECT}: transition to state WAIT_RECONNECT not permitted! (abis.c:267)
[DEBUG] ctrl_if_trx.py:207 (TRX1@127.0.0.1:5700/1) Recv SETPOWER cmd
20251125060031584 DOML NOTICE BTS_SHUTDOWN(bts0)[0x512000004720]{WAIT_RAMP_DOWN_COMPL}: BTS is already being shutdown. (bts_shutdown_fsm.c:261)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(7): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(8): error (error -> error)
20251125060031584 DABIS ERROR abis_link(abis_link)[0x512000008da0]{WAIT_RECONNECT}: transition to state WAIT_RECONNECT not permitted! (abis.c:267)
[DEBUG] ctrl_if_trx.py:207 (TRX2@127.0.0.1:5700/2) Recv SETPOWER cmd
20251125060031584 DOML NOTICE BTS_SHUTDOWN(bts0)[0x512000004720]{WAIT_RAMP_DOWN_COMPL}: BTS is already being shutdown. (bts_shutdown_fsm.c:261)
20251125060031584 DABIS ERROR abis_link(abis_link)[0x512000008da0]{WAIT_RECONNECT}: transition to state WAIT_RECONNECT not permitted! (abis.c:267)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(9): error (error -> error)
[DEBUG] ctrl_if_trx.py:207 (TRX3@127.0.0.1:5700/3) Recv SETPOWER cmd
20251125060031584 DOML NOTICE BTS_SHUTDOWN(bts0)[0x512000004720]{WAIT_RAMP_DOWN_COMPL}: BTS is already being shutdown. (bts_shutdown_fsm.c:261)
20251125060031584 DABIS ERROR abis_link(abis_link)[0x512000008da0]{WAIT_RECONNECT}: transition to state WAIT_RECONNECT not permitted! (abis.c:267)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(10): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(11): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(12): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(13): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(14): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(15): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(16): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(17): error (error -> error)
20251125060031584 DTRX INFO phy0.0: Response message: 'RSP SETPOWER 0 60' (trx_if.c:687)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(18): error (error -> error)
20251125060031585 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(19): error (error -> error)
20251125060031585 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251125060031585 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251125060031585 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251125060031585 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251125060031585 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(20): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(21): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(22): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(23): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(24): error (error -> error)
MTC@d4e8699cf43b: Local verdict of PTC TC_est_dchan(25): error (error -> error)
MTC@d4e8699cf43b: Test case TC_est_dchan finished. Verdict: error
MTC@d4e8699cf43b: Starting external command `/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/ttcn3-tcpdump-stop.sh BTS_Tests.TC_est_dchan error'.
20251125060031585 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251125060031585 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251125060031586 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251125060031586 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251125060031586 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251125060031586 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWEROFF' (trx_if.c:268)
20251125060031586 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251125060031586 DLMI ERROR (bts=0,trx=0) Lost E1 OSMO link (osmo_bsc_main.c:487)
20251125060031586 DRSL DEBUG (bts=0,trx=0) ACC RAMP: nm_obj=BASEBAND-TRANSCEIVER running=0 (acc.c:443)
20251125060031586 DRSL DEBUG (bts=0,trx=0) ACC RAMP: nm_obj=RADIO-CARRIER running=0 (acc.c:443)
20251125060031586 DTRX INFO phy0.1: Response message: 'RSP SETPOWER 0 60' (trx_if.c:687)
20251125060031586 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{WAIT_TRX_CLOSED}: Event BTS_SHUTDOWN_EV_TRX_RAMP_COMPL not permitted (bts_shutdown_fsm.c:82)
20251125060031586 DTRX INFO phy0.2: Response message: 'RSP SETPOWER 0 60' (trx_if.c:687)
20251125060031586 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{WAIT_TRX_CLOSED}: Event BTS_SHUTDOWN_EV_TRX_RAMP_COMPL not permitted (bts_shutdown_fsm.c:82)
20251125060031586 DTRX INFO phy0.3: Response message: 'RSP SETPOWER 0 60' (trx_if.c:687)
20251125060031586 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{WAIT_TRX_CLOSED}: Event BTS_SHUTDOWN_EV_TRX_RAMP_COMPL not permitted (bts_shutdown_fsm.c:82)
[DEBUG] ctrl_if_trx.py:220 (BTS@127.0.0.1:5700) Recv RFMUTE cmd
20251125060031586 DTRX INFO phy0.0: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (TRX1@127.0.0.1:5700/1) Recv RFMUTE cmd
[DEBUG] ctrl_if_trx.py:220 (TRX2@127.0.0.1:5700/2) Recv RFMUTE cmd
20251125060031586 DTRX INFO phy0.1: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251125060031586 DTRX INFO phy0.2: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (TRX3@127.0.0.1:5700/3) Recv RFMUTE cmd
20251125060031586 DTRX INFO phy0.3: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:115 (BTS@127.0.0.1:5700) Recv POWEROFF cmd
[INFO] ctrl_if_trx.py:117 (BTS@127.0.0.1:5700) Stopping transceiver...
[INFO] transceiver.py:276 Stopping clock generator
20251125060031587 DTRX INFO phy0.0: Response message: 'RSP POWEROFF 0' (trx_if.c:687)
20251125060031587 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_WAIT_POWEROFF_CNF}: Received Event TRX_PROV_EV_POWEROFF_CNF (trx_provision_fsm.c:59)
20251125060031587 DL1C NOTICE GSM clock stopped (scheduler_trx.c:510)
20251125060031587 DTRX NOTICE phy0.0: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251125060031587 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state ACTIVE -> NONE (lchan.c:291)
20251125060031587 DTRX NOTICE phy0.1: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251125060031587 DTRX NOTICE phy0.2: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251125060031587 DTRX NOTICE phy0.3: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251125060031587 DL1C INFO phy0: PHY link state change connected -> shutdown (phy_link.c:58)
20251125060031587 DL1C INFO TRX_PROV(phy0-0)[0x512000005aa0]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
Tue Nov 25 06:00:31 UTC 2025
------ BTS_Tests.TC_est_dchan error ------

Saving talloc report from 127.0.0.1:4241 to BTS_Tests.TC_est_dchan.talloc
20251125060031589 DL1C INFO TRX_PROV(phy0-1)[0x512000005c20]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251125060031589 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
20251125060031589 DL1C INFO TRX_PROV(phy0-2)[0x512000005da0]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251125060031589 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
20251125060031589 DL1C INFO TRX_PROV(phy0-3)[0x512000005f20]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251125060031589 DOML ERROR BTS_SHUTDOWN(bts0)[0x512000004720]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
Waiting for packet dumper to finish... 0 (prev_count=-1, count=2278208)
Waiting for packet dumper to finish... 1 (prev_count=2278208, count=2278748)
MTC@d4e8699cf43b: External command `/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/ttcn3-tcpdump-stop.sh BTS_Tests.TC_est_dchan error' was executed successfully (exit status: 0).
MTC@d4e8699cf43b: Starting external command `/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/ttcn3-tcpdump-start.sh BTS_Tests.TC_chan_act_stress'.
------ BTS_Tests.TC_chan_act_stress ------
Tue Nov 25 06:00:34 UTC 2025
/usr/bin/dumpcap -q -s 1520 -n -i any -w "/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/logs/generic/testsuite/BTS_Tests.TC_chan_act_stress.pcap" >/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-asan/logs/generic/testsuite/BTS_Tests.TC_chan_act_stress.pcap.stdout 2>/tmp/cmderr &
Waiting for packet dumper to start... 0
[testenv][generic] Stopping podman container
[testenv][generic] + ['podman', 'kill', 'testenv-bts-all-osmocom-nightly-asan-20251125-0600-5c07c898-0']
20251125060035027 DLINP ERROR CLICONN(asp-clnt-msc-0,){CONNECTING} connect failed (-111) (stream_cli.c:424)
20251125060035031 DLSCCP ERROR 0: SCCP(rctx=0) MTP-TRANSFER.req from SCCP for OPC=187=0.23.3,DPC=185=0.23.1,SLS=11: no route! (sccp_scrc.c:177)
20251125060035031 DLSCCP NOTICE 0: SCCP(rctx=0) SCRC Routing Failure (MTP failure) for CL message CL:CLDT (sccp_sclc.c:399)
20251125060035032 DMSC DEBUG N-NOTICE.ind(00 04 30 04 01 20 ) (osmo_bsc_sigtran.c:348)
20251125060035032 DMSC NOTICE (msc=0) (calling_addr=RI=2,PC=185,SSN=254) N-NOTICE.ind cause=5='MTP failure' importance=0 (osmo_bsc_sigtran.c:168)
testenv-bts-all-osmocom-nightly-asan-20251125-0600-5c07c898-0
[testenv][generic] Stopping testsuite (2866053)
[testenv] feed_watchdog_loop: podman container has stopped
[testenv][generic] Logs saved to: https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bts-test-asan/41/artifact/logs/ 
+ RC=1
+ [ 1 = 0 ]
+ uptime
+ grep --color=always -o load.*
load average: 4.97, 1.43, 0.66
+ exit 1
Build step 'Execute shell' marked build as failure
Recording test results
[Checks API] No suitable checks publisher found.
Sending e-mails to: osmith@sysmocom.de
Archiving artifacts
Finished: FAILURE