Skipping 2,340 KB.. Full Log

20251101060222779 DL1C NOTICE (bts=0,trx=2,ts=5) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060222779 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222779 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222779 DOML NOTICE OC=CHANNEL(03) INST=(00,02,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222779 DL1C NOTICE (bts=0,trx=2,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060222779 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222779 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222779 DOML NOTICE OC=CHANNEL(03) INST=(00,02,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222780 DL1C NOTICE (bts=0,trx=2,ts=7) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060222780 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222780 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222780 DOML NOTICE OC=CHANNEL(03) INST=(00,02,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222780 DOML ERROR OC=RADIO-CARRIER INST=(00,03,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251101060222780 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,03,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251101060222780 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:245)
20251101060222780 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RXTUNE 1783200' (trx_if.c:268)
20251101060222780 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD TXTUNE 1878200' (trx_if.c:268)
20251101060222780 DTRX INFO phy0.3: Requesting TRXD PDU version 2 (trx_if.c:296)
20251101060222780 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251101060222780 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc rxtune-ack txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:124 (TRX3@127.0.0.1:5700/3) Recv RXTUNE cmd
20251101060222780 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,03,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222780 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
20251101060222781 DTRX INFO phy0.3: Response message: 'RSP RXTUNE 0 1783200' (trx_if.c:687)
20251101060222781 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251101060222781 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:131 (TRX3@127.0.0.1:5700/3) Recv TXTUNE cmd
20251101060222781 DTRX INFO phy0.3: Response message: 'RSP TXTUNE 0 1878200' (trx_if.c:687)
20251101060222781 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251101060222781 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251101060222781 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060222781 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,03,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
[DEBUG] ctrl_if_trx.py:182 (TRX3@127.0.0.1:5700/3) Recv SETFORMAT cmd
20251101060222781 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
[WARNING] ctrl_if_trx.py:196 (TRX3@127.0.0.1:5700/3) Requested TRXD header version 2 is not supported, suggesting 1...
20251101060222781 DTRX INFO phy0.3: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
20251101060222781 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060222781 DTRX INFO phy0.3: Requesting TRXD PDU version 1 (trx_if.c:296)
20251101060222781 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251101060222781 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:220 (TRX3@127.0.0.1:5700/3) Recv RFMUTE cmd
20251101060222781 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
20251101060222781 DL1C NOTICE (bts=0,trx=3,ts=0) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060222781 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222781 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060222781 DTRX INFO phy0.3: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
20251101060222781 DOML NOTICE OC=CHANNEL(03) INST=(00,03,00): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:215 (TRX3@127.0.0.1:5700/3) Recv NOMTXPOWER cmd
20251101060222782 DTRX INFO phy0.3: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060222782 DL1C NOTICE (bts=0,trx=3,ts=1) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
[DEBUG] ctrl_if_trx.py:182 (TRX3@127.0.0.1:5700/3) Recv SETFORMAT cmd
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
[INFO] ctrl_if_trx.py:201 (TRX3@127.0.0.1:5700/3) TRXD header version 1 -> 1
20251101060222782 DTRX INFO phy0.3: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060222782 DTRX INFO phy0.3: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222782 DOML NOTICE OC=CHANNEL(03) INST=(00,03,01): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222782 DL1C NOTICE (bts=0,trx=3,ts=2) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222782 DOML NOTICE OC=CHANNEL(03) INST=(00,03,02): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222782 DL1C NOTICE (bts=0,trx=3,ts=3) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222782 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222783 DOML NOTICE OC=CHANNEL(03) INST=(00,03,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222783 DL1C NOTICE (bts=0,trx=3,ts=4) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060222783 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222783 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222783 DOML NOTICE OC=CHANNEL(03) INST=(00,03,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222783 DL1C NOTICE (bts=0,trx=3,ts=5) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060222783 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222783 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222783 DOML NOTICE OC=CHANNEL(03) INST=(00,03,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222784 DL1C NOTICE (bts=0,trx=3,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060222784 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222784 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222784 DOML NOTICE OC=CHANNEL(03) INST=(00,03,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222784 DL1C NOTICE (bts=0,trx=3,ts=7) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060222784 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060222784 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060222784 DOML NOTICE OC=CHANNEL(03) INST=(00,03,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'GPRS' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'EGPRS' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'HOPPING' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'MULTI_TSC' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'OML_ALERTS' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'CBCH' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_V1' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_H_V1' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_EFR' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_AMR' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_H_AMR' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ETWS_PN' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'PAGING_COORDINATION' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'IPV6_NSVC' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ACCH_REP' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'CCN' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VAMOS' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ABIS_OSMO_PCU' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'BCCH_PWR_RED' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'DYN_TS_SDCCH8' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ACCH_TEMP_OVP' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'OSMUX' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VBS' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VGCS' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'TWTS001' is supported (abis_nm.c:599)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): ARI reported sw[0/2]: osmobts is 1.9.0 (abis_nm.c:652)
20251101060222785 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Reported variant: osmo-bts-trx (abis_nm.c:534)
20251101060222785 DOML NOTICE OC=GPRS-NSE(f0) INST=(00,ff,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222785 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251101060222785 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060222785 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222785 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251101060222785 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251101060222786 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,01,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222786 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251101060222786 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251101060222786 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,02,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222786 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251101060222786 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251101060222787 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060222787 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:223)
20251101060222787 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RXTUNE 1782000' (trx_if.c:268)
20251101060222787 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD TXTUNE 1877000' (trx_if.c:268)
20251101060222787 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060222787 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251101060222787 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251101060222787 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060222787 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
[DEBUG] ctrl_if_trx.py:124 (BTS@127.0.0.1:5700) Recv RXTUNE cmd
20251101060222787 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251101060222787 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
20251101060222787 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251101060222787 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251101060222787 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
20251101060222787 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251101060222787 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETTSC
20251101060222787 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
20251101060222787 DTRX INFO phy0.0: Response message: 'RSP RXTUNE 0 1782000' (trx_if.c:687)
20251101060222787 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251101060222787 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060222787 DTRX INFO phy0.1: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251101060222787 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251101060222787 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060222788 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 0 1' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 1 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETTSC
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETTSC
[DEBUG] ctrl_if_trx.py:131 (BTS@127.0.0.1:5700) Recv TXTUNE cmd
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 2 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 3 8' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 4 1' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 5 7' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.0: Response message: 'RSP TXTUNE 0 1877000' (trx_if.c:687)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251101060222788 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060222788 DTRX INFO phy0.2: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251101060222788 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060222788 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETRXGAIN
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 0 3' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 1 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 2 7' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 3 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 4 7' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 5 1' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETTSC
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETRXGAIN
20251101060222788 DTRX INFO phy0.3: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251101060222788 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack other-trx (trx_provision_fsm.c:511)
20251101060222788 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 0 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 1 3' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 2 3' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 3 7' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 4 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 5 1' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 7 7' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.0: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: nomtxpower-ack other-trx (trx_provision_fsm.c:511)
20251101060222788 DTRX INFO phy0.1: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
20251101060222788 DTRX INFO phy0.2: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETRXGAIN
20251101060222788 DTRX INFO phy0.3: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:215 (BTS@127.0.0.1:5700) Recv NOMTXPOWER cmd
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060222788 DTRX INFO phy0.0: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251101060222788 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: state_chg to OPEN_WAIT_POWERON_CNF (trx_provision_fsm.c:509)
20251101060222788 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWERON' (trx_if.c:268)
20251101060222788 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 0 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251101060222788 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 0 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:97 (BTS@127.0.0.1:5700) Recv POWERON CMD
[INFO] ctrl_if_trx.py:109 (BTS@127.0.0.1:5700) Starting transceiver...
[INFO] transceiver.py:236 Starting clock generator
20251101060222789 DTRX INFO phy0.0: Response message: 'RSP POWERON 0' (trx_if.c:687)
20251101060222789 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_WAIT_POWERON_CNF}: Received Event TRX_PROV_EV_POWERON_CNF (trx_provision_fsm.c:56)
20251101060222789 DL1C NOTICE GSM clock started, waiting for clock indications (scheduler_trx.c:487)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060222789 DL1C INFO phy0: PHY link state change connecting -> connected (phy_link.c:58)
20251101060222789 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_WAIT_POWERON_CNF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:549)
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 0 5' (trx_if.c:268)
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 1 1' (trx_if.c:268)
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 2 1' (trx_if.c:268)
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 3 1' (trx_if.c:268)
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 4 8' (trx_if.c:268)
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 5 3' (trx_if.c:268)
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 6 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251101060222789 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251101060222789 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 1 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETRXGAIN
20251101060222789 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 1 13' (trx_if.c:687)
20251101060222789 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 0 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060222790 DTRX INFO phy0.0: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060222790 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 2 13' (trx_if.c:687)
20251101060222790 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 2 7' (trx_if.c:687)
20251101060222790 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 0 5' (trx_if.c:687)
20251101060222790 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 1 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060222790 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 1 1' (trx_if.c:687)
20251101060222790 DOML NOTICE OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251101060222790 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 3 8' (trx_if.c:687)
20251101060222790 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 3 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060222790 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 2 1' (trx_if.c:687)
20251101060222790 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 2 3' (trx_if.c:687)
20251101060222790 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 4 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251101060222790 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 4 7' (trx_if.c:687)
20251101060222790 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 3 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251101060222791 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 4 8' (trx_if.c:687)
20251101060222791 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 5 7' (trx_if.c:687)
20251101060222791 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 5 1' (trx_if.c:687)
20251101060222791 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 3 7' (trx_if.c:687)
20251101060222791 DLINP ERROR CLICONN(ts-0-2-rsl-trx0,){CONNECTING} connect failed (-111) (stream_cli.c:423)
20251101060222791 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060222791 DABIS ERROR E1L(0) Signalling link down (abis.c:429)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060222791 DLINP ERROR SRVCONN(ts-0-1-oml,r=127.0.0.1:33897<->l=127.0.0.11:3002) lost connection with client (-104) (stream_srv.c:714)
20251101060222791 DLINP NOTICE E1TS(0:1) failed reading from socket: -104 (ipaccess.c:554)
20251101060222791 DLINP NOTICE E1L(0) Signalling link down (bts_ipaccess_nanobts.c:778)
20251101060222791 DLINP NOTICE (bts=0) Dropping OML link: link down (bts_ipaccess_nanobts.c:543)
20251101060222791 DLMI ERROR (bts=0,trx=0) Lost E1 OML link (osmo_bsc_main.c:487)
20251101060222791 DOML NOTICE BTS_SHUTDOWN(bts0)[0x55a3eef24090]{NONE}: Shutting down BTS, exit 0, reason: Abis close (bts_shutdown_fsm.c:268)
20251101060222792 DLMI ERROR (bts=0,trx=0) Lost E1 OSMO link (osmo_bsc_main.c:487)
20251101060222792 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251101060222792 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251101060222792 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251101060222792 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
20251101060222792 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251101060222792 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251101060222792 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251101060222792 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251101060222792 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251101060222792 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251101060222792 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWERON}: Received Event TRX_PROV_EV_CLOSE (l1_if.c:193)
20251101060222792 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWEROFF' (trx_if.c:268)
20251101060222792 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWERON}: state_chg to OPEN_WAIT_POWEROFF_CNF (trx_provision_fsm.c:613)
20251101060222792 DOML NOTICE BTS_SHUTDOWN(bts0)[0x55a3eef24090]{WAIT_TRX_CLOSED}: BTS is already being shutdown. (bts_shutdown_fsm.c:261)
20251101060222792 DABIS ERROR abis_link(abis_link)[0x55a3eef2a8c0]{WAIT_RECONNECT}: transition to state WAIT_RECONNECT not permitted! (abis.c:267)
20251101060222792 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 5 3' (trx_if.c:687)
20251101060222792 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
20251101060222792 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
20251101060222793 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 4 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251101060222793 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 6 7' (trx_if.c:687)
20251101060222793 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
20251101060222793 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060222793 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 5 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:220 (TRX1@127.0.0.1:5700/1) Recv RFMUTE cmd
20251101060222793 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
20251101060222793 DTRX INFO phy0.1: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251101060222793 DTRX INFO phy0.2: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (TRX2@127.0.0.1:5700/2) Recv RFMUTE cmd
[DEBUG] ctrl_if_trx.py:220 (BTS@127.0.0.1:5700) Recv RFMUTE cmd
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060222793 DTRX INFO phy0.0: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251101060222793 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:115 (BTS@127.0.0.1:5700) Recv POWEROFF cmd
[INFO] ctrl_if_trx.py:117 (BTS@127.0.0.1:5700) Stopping transceiver...
[INFO] transceiver.py:239 Stopping clock generator
20251101060222794 DTRX INFO phy0.0: Response message: 'RSP POWEROFF 0' (trx_if.c:687)
20251101060222794 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_WAIT_POWEROFF_CNF}: Received Event TRX_PROV_EV_POWEROFF_CNF (trx_provision_fsm.c:59)
20251101060222794 DL1C NOTICE GSM clock stopped (scheduler_trx.c:506)
20251101060222794 DTRX NOTICE phy0.0: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251101060222794 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state ACTIVE -> NONE (lchan.c:291)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060222794 DTRX NOTICE phy0.1: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251101060222794 DTRX NOTICE phy0.2: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251101060222794 DTRX NOTICE phy0.3: Closing TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1251)
20251101060222794 DL1C INFO phy0: PHY link state change connected -> shutdown (phy_link.c:58)
20251101060222794 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251101060222796 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251101060222796 DOML ERROR BTS_SHUTDOWN(bts0)[0x55a3eef24090]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
20251101060222796 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251101060222796 DOML ERROR BTS_SHUTDOWN(bts0)[0x55a3eef24090]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
20251101060222796 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_WAIT_POWEROFF_CNF}: state_chg to CLOSED (trx_provision_fsm.c:320)
20251101060222796 DOML ERROR BTS_SHUTDOWN(bts0)[0x55a3eef24090]{NONE}: Event BTS_SHUTDOWN_EV_TRX_CLOSED not permitted (bts_shutdown_fsm.c:282)
MTC@4499eccbfe40: "TC_rach_load_idle_thresh0() start"
20251101060224110 DLGLOBAL NOTICE TTCN3 f_logp(): TC_rach_load_idle_thresh0() start (logging_vty.c:1172)
20251101060224328 DLSS7 ERROR Unable to route HMRT message: the AS as-clnt-msc-0 is down (osmo_ss7_hmrt.c:238)
20251101060224328 DLINP ERROR CLICONN(asp-clnt-msc-0,){CONNECTING} connect failed (-111) (stream_cli.c:423)
20251101060227794 DABIS NOTICE A-bis connection establishment to BSC (127.0.0.11) in progress... (abis.c:170)
20251101060227794 DLINP NOTICE E1TS(0:1) enabling ipaccess BTS mode, OML connecting to 127.0.0.11:3002 (ipaccess.c:1020)
20251101060227795 DLINP NOTICE received ID_GET for unit ID 1234/0/0 (ipaccess.c:834)
20251101060227795 DL1C INFO phy0: PHY link state change shutdown -> connecting (phy_link.c:58)
20251101060227796 DTRX NOTICE phy0.0: Opening TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1283)
20251101060227796 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{CLOSED}: Received Event TRX_PROV_EV_OPEN (trx_if.c:1363)
20251101060227796 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWEROFF' (trx_if.c:268)
20251101060227796 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{CLOSED}: state_chg to OPEN_POWEROFF (trx_provision_fsm.c:363)
20251101060227796 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:115 (BTS@127.0.0.1:5700) Recv POWEROFF cmd
[INFO] ctrl_if_trx.py:117 (BTS@127.0.0.1:5700) Stopping transceiver...
20251101060227797 DTRX NOTICE phy0.1: Opening TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1283)
20251101060227797 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{CLOSED}: Received Event TRX_PROV_EV_OPEN (trx_if.c:1363)
20251101060227797 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{CLOSED}: state_chg to OPEN_POWEROFF (trx_provision_fsm.c:363)
20251101060227797 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:220 (TRX1@127.0.0.1:5700/1) Recv RFMUTE cmd
20251101060227798 DTRX NOTICE phy0.2: Opening TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1283)
20251101060227798 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{CLOSED}: Received Event TRX_PROV_EV_OPEN (trx_if.c:1363)
20251101060227798 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{CLOSED}: state_chg to OPEN_POWEROFF (trx_provision_fsm.c:363)
20251101060227798 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:220 (TRX2@127.0.0.1:5700/2) Recv RFMUTE cmd
20251101060227799 DTRX NOTICE phy0.3: Opening TRXC/TRXD connections to 127.0.0.1 (trx_if.c:1283)
20251101060227799 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{CLOSED}: Received Event TRX_PROV_EV_OPEN (trx_if.c:1363)
20251101060227799 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{CLOSED}: state_chg to OPEN_POWEROFF (trx_provision_fsm.c:363)
20251101060227799 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RFMUTE 1' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:220 (TRX3@127.0.0.1:5700/3) Recv RFMUTE cmd
20251101060227801 DTRX INFO phy0.0: Response message: 'RSP POWEROFF 0' (trx_if.c:687)
20251101060227801 DTRX INFO phy0.1: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251101060227801 DTRX INFO phy0.2: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251101060227801 DTRX INFO phy0.3: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (BTS@127.0.0.1:5700) Recv RFMUTE cmd
20251101060227801 DTRX INFO phy0.0: Response message: 'RSP RFMUTE 0 1' (trx_if.c:687)
20251101060227807 DOML ERROR OC=GPRS-CELL INST=(00,00,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251101060227807 DNM ERROR OC=GPRS-CELL(f1) INST=(00,00,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251101060227807 DOML NOTICE OC=GPRS-CELL(f1) INST=(00,00,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227808 DOML ERROR OC=RADIO-CARRIER INST=(00,00,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251101060227808 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,00,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251101060227808 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,00,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227808 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:220 (BTS@127.0.0.1:5700) Recv RFMUTE cmd
20251101060227809 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,00,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
20251101060227809 DTRX INFO phy0.0: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
20251101060227809 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
20251101060227810 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
20251101060227810 DL1C NOTICE (bts=0,trx=0,ts=0) Configured multiframe with 'BCCH+CCCH+SDCCH/4+SACCH/4' (scheduler.c:1024)
20251101060227810 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating FCCH (scheduler.c:1070)
20251101060227810 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating SCH (scheduler.c:1070)
20251101060227810 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating BCCH (scheduler.c:1070)
20251101060227810 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating RACH (scheduler.c:1070)
20251101060227810 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating CCCH (scheduler.c:1070)
20251101060227810 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state NONE -> ACTIVE (lchan.c:291)
20251101060227810 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227810 DTRX INFO phy0.0: Requesting TRXD PDU version 2 (trx_if.c:296)
20251101060227810 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251101060227810 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack setformat-ack (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:182 (BTS@127.0.0.1:5700) Recv SETFORMAT cmd
[WARNING] ctrl_if_trx.py:196 (BTS@127.0.0.1:5700) Requested TRXD header version 2 is not supported, suggesting 1...
20251101060227811 DOML NOTICE OC=CHANNEL(03) INST=(00,00,00): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227811 DTRX INFO phy0.0: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
20251101060227811 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060227811 DTRX INFO phy0.0: Requesting TRXD PDU version 1 (trx_if.c:296)
20251101060227811 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251101060227811 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack setformat-ack (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:182 (BTS@127.0.0.1:5700) Recv SETFORMAT cmd
20251101060227811 DL1C NOTICE (bts=0,trx=0,ts=1) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060227812 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227812 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack setformat-ack (trx_provision_fsm.c:511)
[INFO] ctrl_if_trx.py:201 (BTS@127.0.0.1:5700) TRXD header version 1 -> 1
20251101060227812 DTRX INFO phy0.0: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251101060227812 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060227812 DTRX INFO phy0.0: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251101060227812 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227812 DOML NOTICE OC=CHANNEL(03) INST=(00,00,01): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227812 DL1C NOTICE (bts=0,trx=0,ts=2) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060227812 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227812 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227813 DOML NOTICE OC=CHANNEL(03) INST=(00,00,02): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227813 DL1C NOTICE (bts=0,trx=0,ts=3) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060227813 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227813 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227813 DOML NOTICE OC=CHANNEL(03) INST=(00,00,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227813 DL1C NOTICE (bts=0,trx=0,ts=4) Configured multiframe with 'NONE' (scheduler.c:1024)
20251101060227813 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227813 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227814 DOML NOTICE OC=CHANNEL(03) INST=(00,00,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227814 DL1C NOTICE (bts=0,trx=0,ts=5) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251101060227814 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227814 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227814 DOML NOTICE OC=CHANNEL(03) INST=(00,00,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227815 DL1C NOTICE (bts=0,trx=0,ts=6) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060227815 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227815 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227815 DOML NOTICE OC=CHANNEL(03) INST=(00,00,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227815 DL1C NOTICE (bts=0,trx=0,ts=7) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227815 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227815 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227815 DOML NOTICE OC=CHANNEL(03) INST=(00,00,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227815 DOML ERROR OC=RADIO-CARRIER INST=(00,01,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251101060227816 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,01,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251101060227816 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:245)
20251101060227816 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RXTUNE 1782400' (trx_if.c:268)
20251101060227816 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD TXTUNE 1877400' (trx_if.c:268)
20251101060227816 DTRX INFO phy0.1: Requesting TRXD PDU version 2 (trx_if.c:296)
20251101060227816 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251101060227816 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc rxtune-ack txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227816 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,01,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227816 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:124 (TRX1@127.0.0.1:5700/1) Recv RXTUNE cmd
20251101060227816 DTRX INFO phy0.1: Response message: 'RSP RXTUNE 0 1782400' (trx_if.c:687)
20251101060227816 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251101060227816 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227816 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,01,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
[DEBUG] ctrl_if_trx.py:131 (TRX1@127.0.0.1:5700/1) Recv TXTUNE cmd
20251101060227817 DTRX INFO phy0.1: Response message: 'RSP TXTUNE 0 1877400' (trx_if.c:687)
20251101060227817 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,01,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
20251101060227817 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251101060227817 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251101060227817 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227817 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,01,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
[DEBUG] ctrl_if_trx.py:182 (TRX1@127.0.0.1:5700/1) Recv SETFORMAT cmd
20251101060227817 DL1C NOTICE (bts=0,trx=1,ts=0) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060227817 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227817 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[WARNING] ctrl_if_trx.py:196 (TRX1@127.0.0.1:5700/1) Requested TRXD header version 2 is not supported, suggesting 1...
20251101060227817 DTRX INFO phy0.1: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
20251101060227817 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060227817 DTRX INFO phy0.1: Requesting TRXD PDU version 1 (trx_if.c:296)
20251101060227817 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251101060227817 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227818 DOML NOTICE OC=CHANNEL(03) INST=(00,01,00): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227818 DTRX INFO phy0.1: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:220 (TRX1@127.0.0.1:5700/1) Recv RFMUTE cmd
20251101060227818 DL1C NOTICE (bts=0,trx=1,ts=1) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060227818 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227818 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:215 (TRX1@127.0.0.1:5700/1) Recv NOMTXPOWER cmd
20251101060227818 DOML NOTICE OC=CHANNEL(03) INST=(00,01,01): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227818 DTRX INFO phy0.1: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251101060227818 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251101060227818 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227819 DL1C NOTICE (bts=0,trx=1,ts=2) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227819 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227819 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:182 (TRX1@127.0.0.1:5700/1) Recv SETFORMAT cmd
20251101060227819 DOML NOTICE OC=CHANNEL(03) INST=(00,01,02): ADM STATE Locked -> Unlocked (oml.c:1490)
[INFO] ctrl_if_trx.py:201 (TRX1@127.0.0.1:5700/1) TRXD header version 1 -> 1
20251101060227819 DL1C NOTICE (bts=0,trx=1,ts=3) Configured multiframe with 'NONE' (scheduler.c:1024)
20251101060227819 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227819 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227819 DTRX INFO phy0.1: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251101060227819 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060227819 DTRX INFO phy0.1: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251101060227819 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227819 DOML NOTICE OC=CHANNEL(03) INST=(00,01,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227820 DL1C NOTICE (bts=0,trx=1,ts=4) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060227820 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227820 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227820 DOML NOTICE OC=CHANNEL(03) INST=(00,01,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227820 DL1C NOTICE (bts=0,trx=1,ts=5) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060227820 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227820 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227820 DOML NOTICE OC=CHANNEL(03) INST=(00,01,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227821 DL1C NOTICE (bts=0,trx=1,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227821 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227821 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227821 DOML NOTICE OC=CHANNEL(03) INST=(00,01,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227821 DL1C NOTICE (bts=0,trx=1,ts=7) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227821 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227821 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227821 DOML NOTICE OC=CHANNEL(03) INST=(00,01,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227821 DOML ERROR OC=RADIO-CARRIER INST=(00,02,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251101060227822 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,02,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251101060227822 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:245)
20251101060227822 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RXTUNE 1782800' (trx_if.c:268)
20251101060227822 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD TXTUNE 1877800' (trx_if.c:268)
20251101060227822 DTRX INFO phy0.2: Requesting TRXD PDU version 2 (trx_if.c:296)
20251101060227822 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251101060227822 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc rxtune-ack txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227822 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,02,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227822 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:124 (TRX2@127.0.0.1:5700/2) Recv RXTUNE cmd
20251101060227822 DTRX INFO phy0.2: Response message: 'RSP RXTUNE 0 1782800' (trx_if.c:687)
20251101060227822 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251101060227822 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227822 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,02,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
[DEBUG] ctrl_if_trx.py:131 (TRX2@127.0.0.1:5700/2) Recv TXTUNE cmd
20251101060227823 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,02,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
20251101060227823 DTRX INFO phy0.2: Response message: 'RSP TXTUNE 0 1877800' (trx_if.c:687)
20251101060227823 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,02,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
20251101060227823 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251101060227823 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251101060227823 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227823 DL1C NOTICE (bts=0,trx=2,ts=0) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251101060227823 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227823 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227823 DOML NOTICE OC=CHANNEL(03) INST=(00,02,00): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:182 (TRX2@127.0.0.1:5700/2) Recv SETFORMAT cmd
[WARNING] ctrl_if_trx.py:196 (TRX2@127.0.0.1:5700/2) Requested TRXD header version 2 is not supported, suggesting 1...
20251101060227823 DL1C NOTICE (bts=0,trx=2,ts=1) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227823 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227823 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227823 DTRX INFO phy0.2: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060227824 DTRX INFO phy0.2: Requesting TRXD PDU version 1 (trx_if.c:296)
20251101060227824 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227824 DOML NOTICE OC=CHANNEL(03) INST=(00,02,01): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:220 (TRX2@127.0.0.1:5700/2) Recv RFMUTE cmd
20251101060227824 DTRX INFO phy0.2: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
20251101060227824 DL1C NOTICE (bts=0,trx=2,ts=2) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:215 (TRX2@127.0.0.1:5700/2) Recv NOMTXPOWER cmd
20251101060227824 DTRX INFO phy0.2: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227824 DOML NOTICE OC=CHANNEL(03) INST=(00,02,02): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:182 (TRX2@127.0.0.1:5700/2) Recv SETFORMAT cmd
[INFO] ctrl_if_trx.py:201 (TRX2@127.0.0.1:5700/2) TRXD header version 1 -> 1
20251101060227824 DTRX INFO phy0.2: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060227824 DTRX INFO phy0.2: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227824 DL1C NOTICE (bts=0,trx=2,ts=3) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227824 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227824 DOML NOTICE OC=CHANNEL(03) INST=(00,02,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227825 DL1C NOTICE (bts=0,trx=2,ts=4) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060227825 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227825 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227825 DOML NOTICE OC=CHANNEL(03) INST=(00,02,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227825 DL1C NOTICE (bts=0,trx=2,ts=5) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060227825 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227825 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227825 DOML NOTICE OC=CHANNEL(03) INST=(00,02,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227825 DL1C NOTICE (bts=0,trx=2,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227825 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227825 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227826 DOML NOTICE OC=CHANNEL(03) INST=(00,02,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227826 DL1C NOTICE (bts=0,trx=2,ts=7) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227826 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227826 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227826 DOML NOTICE OC=CHANNEL(03) INST=(00,02,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227826 DOML ERROR OC=RADIO-CARRIER INST=(00,03,ff): O&M Get Attributes [0], SW Configuration is unsupported (oml.c:631)
20251101060227826 DNM ERROR OC=RADIO-CARRIER(02) INST=(00,03,ff): Attribute SW Configuration is unreported (abis_nm.c:557)
20251101060227827 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:245)
20251101060227827 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RXTUNE 1783200' (trx_if.c:268)
20251101060227827 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD TXTUNE 1878200' (trx_if.c:268)
20251101060227827 DTRX INFO phy0.3: Requesting TRXD PDU version 2 (trx_if.c:296)
20251101060227827 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETFORMAT 2' (trx_if.c:268)
20251101060227827 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc rxtune-ack txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:124 (TRX3@127.0.0.1:5700/3) Recv RXTUNE cmd
20251101060227827 DOML NOTICE OC=RADIO-CARRIER(02) INST=(00,03,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227827 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD RFMUTE 0' (trx_if.c:268)
20251101060227827 DTRX INFO phy0.3: Response message: 'RSP RXTUNE 0 1783200' (trx_if.c:687)
20251101060227827 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251101060227827 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc txtune-ack nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227827 DOML ERROR OC=BASEBAND-TRANSCEIVER INST=(00,03,ff): O&M Get Attributes [0], Manufacturer Dependent State is unsupported (oml.c:631)
[DEBUG] ctrl_if_trx.py:131 (TRX3@127.0.0.1:5700/3) Recv TXTUNE cmd
20251101060227827 DNM ERROR OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): Attribute Manufacturer Dependent State is unreported (abis_nm.c:557)
20251101060227827 DTRX INFO phy0.3: Response message: 'RSP TXTUNE 0 1878200' (trx_if.c:687)
20251101060227827 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251101060227827 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251101060227827 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227827 DNM NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): ARI reported sw[0/1]: TRX_PHY_VERSION is Unknown (abis_nm.c:652)
20251101060227827 DTRX INFO phy0.3: Response message: 'RSP SETFORMAT 1 2' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:182 (TRX3@127.0.0.1:5700/3) Recv SETFORMAT cmd
[WARNING] ctrl_if_trx.py:196 (TRX3@127.0.0.1:5700/3) Requested TRXD header version 2 is not supported, suggesting 1...
20251101060227828 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060227828 DTRX INFO phy0.3: Requesting TRXD PDU version 1 (trx_if.c:296)
20251101060227828 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETFORMAT 1' (trx_if.c:268)
20251101060227828 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:220 (TRX3@127.0.0.1:5700/3) Recv RFMUTE cmd
20251101060227828 DL1C NOTICE (bts=0,trx=3,ts=0) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227828 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227828 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc nomtxpower-ack setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227828 DTRX INFO phy0.3: Response message: 'RSP RFMUTE 0 0' (trx_if.c:687)
20251101060227828 DOML NOTICE OC=CHANNEL(03) INST=(00,03,00): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:215 (TRX3@127.0.0.1:5700/3) Recv NOMTXPOWER cmd
20251101060227828 DTRX INFO phy0.3: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251101060227828 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251101060227828 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227828 DL1C NOTICE (bts=0,trx=3,ts=1) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
[DEBUG] ctrl_if_trx.py:182 (TRX3@127.0.0.1:5700/3) Recv SETFORMAT cmd
20251101060227828 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
[INFO] ctrl_if_trx.py:201 (TRX3@127.0.0.1:5700/3) TRXD header version 1 -> 1
20251101060227828 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc setformat-ack other-trx (trx_provision_fsm.c:511)
20251101060227829 DTRX INFO phy0.3: Response message: 'RSP SETFORMAT 1 1' (trx_if.c:687)
20251101060227829 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETFORMAT_CNF (trx_provision_fsm.c:93)
20251101060227829 DTRX INFO phy0.3: Using TRXD PDU version 1 (trx_provision_fsm.c:472)
20251101060227829 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227829 DOML NOTICE OC=CHANNEL(03) INST=(00,03,01): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227829 DL1C NOTICE (bts=0,trx=3,ts=2) Configured multiframe with 'TCH/H+SACCH' (scheduler.c:1024)
20251101060227829 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227829 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227829 DOML NOTICE OC=CHANNEL(03) INST=(00,03,02): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227830 DL1C NOTICE (bts=0,trx=3,ts=3) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060227830 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227830 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227830 DOML NOTICE OC=CHANNEL(03) INST=(00,03,03): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227830 DL1C NOTICE (bts=0,trx=3,ts=4) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227830 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227830 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227830 DOML NOTICE OC=CHANNEL(03) INST=(00,03,04): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227831 DL1C NOTICE (bts=0,trx=3,ts=5) Configured multiframe with 'TCH/F+SACCH' (scheduler.c:1024)
20251101060227831 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227831 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227831 DOML NOTICE OC=CHANNEL(03) INST=(00,03,05): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227831 DL1C NOTICE (bts=0,trx=3,ts=6) Configured multiframe with 'PDCH' (scheduler.c:1024)
20251101060227831 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227831 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227831 DOML NOTICE OC=CHANNEL(03) INST=(00,03,06): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227831 DL1C NOTICE (bts=0,trx=3,ts=7) Configured multiframe with 'SDCCH/8+SACCH/8' (scheduler.c:1024)
20251101060227832 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_TS (l1_if.c:312)
20251101060227832 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: enable tsc other-trx (trx_provision_fsm.c:511)
20251101060227832 DOML NOTICE OC=CHANNEL(03) INST=(00,03,07): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'GPRS' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'EGPRS' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'HOPPING' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'MULTI_TSC' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'OML_ALERTS' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'CBCH' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_V1' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_H_V1' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_EFR' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_F_AMR' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'SPEECH_H_AMR' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ETWS_PN' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'PAGING_COORDINATION' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'IPV6_NSVC' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ACCH_REP' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'CCN' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VAMOS' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ABIS_OSMO_PCU' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'BCCH_PWR_RED' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'DYN_TS_SDCCH8' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'ACCH_TEMP_OVP' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'OSMUX' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VBS' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'VGCS' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Get Attributes Response: feature 'TWTS001' is supported (abis_nm.c:599)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): ARI reported sw[0/2]: osmobts is 1.9.0 (abis_nm.c:652)
20251101060227832 DNM NOTICE OC=BTS(01) INST=(00,ff,ff): Reported variant: osmo-bts-trx (abis_nm.c:534)
20251101060227832 DOML NOTICE OC=GPRS-NSE(f0) INST=(00,ff,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227833 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251101060227833 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc arfcn rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227833 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227833 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251101060227833 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251101060227833 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,01,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227833 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251101060227834 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251101060227834 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,02,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227834 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ENABLE (l1_if.c:170)
20251101060227834 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: tsc other-trx (trx_provision_fsm.c:511)
20251101060227834 DOML NOTICE OC=BASEBAND-TRANSCEIVER(04) INST=(00,03,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
20251101060227834 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_ARFCN (l1_if.c:223)
20251101060227834 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD RXTUNE 1782000' (trx_if.c:268)
20251101060227834 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD TXTUNE 1877000' (trx_if.c:268)
20251101060227834 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227834 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251101060227834 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251101060227834 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack rxtune-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227834 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251101060227834 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
20251101060227834 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
20251101060227834 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:124 (BTS@127.0.0.1:5700) Recv RXTUNE cmd
20251101060227835 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
20251101060227835 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_CFG_BSIC (l1_if.c:229)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETTSC 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETTSC
20251101060227835 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack other-trx (trx_provision_fsm.c:511)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETTSC
20251101060227835 DTRX INFO phy0.0: Response message: 'RSP RXTUNE 0 1782000' (trx_if.c:687)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_RXTUNE_CNF (trx_provision_fsm.c:66)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227835 DTRX INFO phy0.1: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251101060227835 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack txtune-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227835 DL1C INFO TRX_PROV(phy0-1)[0x55a3eef3a3b0]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 0 1' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 1 7' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 2 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 3 8' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 4 1' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 5 7' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.0: Response message: 'RSP TXTUNE 0 1877000' (trx_if.c:687)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_TXTUNE_CNF (trx_provision_fsm.c:71)
20251101060227835 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD NOMTXPOWER' (trx_if.c:268)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227835 DTRX INFO phy0.2: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251101060227835 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack (trx_provision_fsm.c:511)
20251101060227835 DL1C INFO TRX_PROV(phy0-2)[0x55a3eef3b780]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 0 3' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 1 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 2 7' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 3 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 4 7' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 5 1' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETTSC
[DEBUG] ctrl_if_trx.py:131 (BTS@127.0.0.1:5700) Recv TXTUNE cmd
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETRXGAIN
20251101060227835 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251101060227835 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_OTHER_TRX_READY (trx_provision_fsm.c:285)
20251101060227835 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: tsc-ack nomtxpower-ack other-trx (trx_provision_fsm.c:511)
20251101060227835 DL1C INFO TRX_PROV(phy0-3)[0x55a3eef3cb40]{OPEN_POWEROFF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:507)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETTSC
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 0 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 1 3' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 2 3' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 3 7' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 4 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 5 1' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 6 13' (trx_if.c:268)
20251101060227835 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETSLOT 7 7' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETRXGAIN
20251101060227835 DTRX INFO phy0.0: Response message: 'RSP SETTSC 0 7' (trx_if.c:687)
20251101060227836 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_SETTSC_CNF (trx_provision_fsm.c:76)
20251101060227836 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Delay poweron, wait for: nomtxpower-ack other-trx (trx_provision_fsm.c:511)
20251101060227836 DTRX INFO phy0.1: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
20251101060227836 DTRX INFO phy0.2: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
20251101060227836 DTRX INFO phy0.3: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETRXGAIN
[DEBUG] ctrl_if_trx.py:215 (BTS@127.0.0.1:5700) Recv NOMTXPOWER cmd
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060227836 DTRX INFO phy0.0: Response message: 'RSP NOMTXPOWER 0 50' (trx_if.c:687)
20251101060227836 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: Received Event TRX_PROV_EV_NOMTXPOWER_CNF (trx_provision_fsm.c:88)
20251101060227836 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_POWEROFF}: state_chg to OPEN_WAIT_POWERON_CNF (trx_provision_fsm.c:509)
20251101060227836 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD POWERON' (trx_if.c:268)
20251101060227836 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 0 1' (trx_if.c:687)
20251101060227836 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 0 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:97 (BTS@127.0.0.1:5700) Recv POWERON CMD
[INFO] ctrl_if_trx.py:109 (BTS@127.0.0.1:5700) Starting transceiver...
[INFO] transceiver.py:236 Starting clock generator
20251101060227836 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 0 13' (trx_if.c:687)
20251101060227836 DTRX INFO phy0.0: Response message: 'RSP POWERON 0' (trx_if.c:687)
20251101060227836 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_WAIT_POWERON_CNF}: Received Event TRX_PROV_EV_POWERON_CNF (trx_provision_fsm.c:56)
20251101060227837 DL1C NOTICE GSM clock started, waiting for clock indications (scheduler_trx.c:487)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251101060227837 DL1C INFO phy0: PHY link state change connecting -> connected (phy_link.c:58)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060227837 DL1C INFO TRX_PROV(phy0-0)[0x55a3eef38d60]{OPEN_WAIT_POWERON_CNF}: state_chg to OPEN_POWERON (trx_provision_fsm.c:549)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETRXGAIN 10' (trx_if.c:268)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 0 5' (trx_if.c:268)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 1 1' (trx_if.c:268)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 2 1' (trx_if.c:268)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 3 1' (trx_if.c:268)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 4 8' (trx_if.c:268)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 5 3' (trx_if.c:268)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 6 7' (trx_if.c:268)
20251101060227837 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETSLOT 7 13' (trx_if.c:268)
20251101060227837 DOML NOTICE OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked (oml.c:1490)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETRXGAIN
20251101060227837 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 1 7' (trx_if.c:687)
20251101060227837 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 1 13' (trx_if.c:687)
20251101060227837 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 1 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060227837 DTRX INFO phy0.0: Response message: 'RSP SETRXGAIN 0 10' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251101060227837 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 2 13' (trx_if.c:687)
20251101060227837 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 2 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060227837 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 2 3' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251101060227837 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 0 5' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060227837 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 3 8' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060227838 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 3 13' (trx_if.c:687)
20251101060227838 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 1 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060227838 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 4 1' (trx_if.c:687)
20251101060227838 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 3 7' (trx_if.c:687)
20251101060227838 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 2 1' (trx_if.c:687)
20251101060227838 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 4 7' (trx_if.c:687)
20251101060227838 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 5 7' (trx_if.c:687)
20251101060227838 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 4 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
20251101060227839 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 3 1' (trx_if.c:687)
20251101060227839 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
20251101060227839 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 5 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251101060227839 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 5 1' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX1@127.0.0.1:5700/1) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251101060227839 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 4 8' (trx_if.c:687)
20251101060227839 DTRX INFO phy0.1: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
20251101060227839 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (TRX2@127.0.0.1:5700/2) Ignore CMD SETSLOT
20251101060227839 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 6 13' (trx_if.c:687)
20251101060227839 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 5 3' (trx_if.c:687)
20251101060227839 DTRX INFO phy0.2: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
20251101060227839 DTRX INFO phy0.3: Response message: 'RSP SETSLOT 0 7 7' (trx_if.c:687)
20251101060227839 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 6 7' (trx_if.c:687)
[DEBUG] ctrl_if_trx.py:229 (TRX3@127.0.0.1:5700/3) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD SETSLOT
20251101060227839 DTRX INFO phy0.0: Response message: 'RSP SETSLOT 0 7 13' (trx_if.c:687)
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: Established a new IPA connection (conn_id=2)
20251101060227841 DTRX INFO phy0.0: Clock indication: fn=0 (trx_if.c:138)
20251101060227841 DL1C INFO TRX Clock Ind: elapsed_us=64505147147231, elapsed_fn=  0, error_us=+64505147147231 (scheduler_trx.c:562)
20251101060227841 DL1C INFO GSM clock jitter: -64505147147231us (elapsed_fn=0) (scheduler_trx.c:581)
[DEBUG] clck_gen.py:102 IND CLOCK 0
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Tx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_UNITID (8) } } } }
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: A new IPA/RSL connection has been established (conn_id=2), waiting for IDENTITY RESPONSE...
20251101060227844 DLINP NOTICE received ID_GET for unit ID 1234/0/0 (ipaccess.c:834)
20251101060227844 DRSL INFO (bts=0,trx=0) RSL link up (bts_trx.c:234)
20251101060227844 DL1C INFO (bts=0,trx=0) power_ramp_start(cur=-10000, tgt=30000) (tx_power.c:250)
20251101060227845 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: Established a new IPA connection (conn_id=3)
20251101060227845 DRSL DEBUG (bts=0,trx=0) ACC RAMP: nm_obj=RADIO-CARRIER running=1 (acc.c:443)
20251101060227845 DRSL DEBUG (bts=0,trx=0) ACC RAMP: ignoring state change because TRX is not usable (acc.c:453)
20251101060227845 DRSL DEBUG (bts=0,trx=0) ACC RAMP: nm_obj=BASEBAND-TRANSCEIVER running=1 (acc.c:443)
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Tx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_UNITID (8) } } } }
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: A new IPA/RSL connection has been established (conn_id=3), waiting for IDENTITY RESPONSE...
20251101060227846 DLINP NOTICE received ID_GET for unit ID 1234/0/1 (ipaccess.c:834)
20251101060227846 DRSL INFO (bts=0,trx=1) RSL link up (bts_trx.c:234)
20251101060227846 DL1C INFO (bts=0,trx=1) power_ramp_start(cur=-10000, tgt=30000) (tx_power.c:250)
20251101060227847 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: Established a new IPA connection (conn_id=4)
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Tx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_UNITID (8) } } } }
20251101060227848 DLINP NOTICE received ID_GET for unit ID 1234/0/2 (ipaccess.c:834)
20251101060227848 DRSL INFO (bts=0,trx=2) RSL link up (bts_trx.c:234)
20251101060227848 DL1C INFO (bts=0,trx=2) power_ramp_start(cur=-10000, tgt=30000) (tx_power.c:250)
20251101060227849 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: A new IPA/RSL connection has been established (conn_id=4), waiting for IDENTITY RESPONSE...
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Rx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O } } } }
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: IPA ID RESP: { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O } }
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Got IDENTITY RESPONSE (conn_id=2): { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O } }
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Warning: dec_IpaUnitId(): Data remained at the end of the stream after successful decoding: '00'O
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Mapped TRX#0 to TCP/IP conn_id=2
MTC@4499eccbfe40: 1/4 transceiver(s) connected
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: Established a new IPA connection (conn_id=5)
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Tx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_UNITID (8) } } } }
20251101060227856 DLINP NOTICE received ID_GET for unit ID 1234/0/3 (ipaccess.c:834)
20251101060227856 DRSL INFO (bts=0,trx=3) RSL link up (bts_trx.c:234)
20251101060227856 DL1C INFO (bts=0,trx=3) power_ramp_start(cur=-10000, tgt=30000) (tx_power.c:250)
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Rx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3100'O } } } }
20251101060227856 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: IPA ID RESP: { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3100'O } }
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: A new IPA/RSL connection has been established (conn_id=5), waiting for IDENTITY RESPONSE...
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Got IDENTITY RESPONSE (conn_id=3): { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3100'O } }
MTC@4499eccbfe40: 1/4 RF Resource Indication(s) received
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Rx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3200'O } } } }
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Warning: dec_IpaUnitId(): Data remained at the end of the stream after successful decoding: '00'O
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Mapped TRX#1 to TCP/IP conn_id=3
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: IPA ID RESP: { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3200'O } }
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
MTC@4499eccbfe40: 2/4 transceiver(s) connected
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Got IDENTITY RESPONSE (conn_id=4): { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3200'O } }
MTC@4499eccbfe40: 2/4 RF Resource Indication(s) received
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Rx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3300'O } } } }
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: IPA ID RESP: { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3300'O } }
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Warning: dec_IpaUnitId(): Data remained at the end of the stream after successful decoding: '00'O
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Mapped TRX#2 to TCP/IP conn_id=4
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
MTC@4499eccbfe40: 3/4 transceiver(s) connected
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Got IDENTITY RESPONSE (conn_id=5): { { len := 10, tag := IPAC_IDTAG_UNITNAME (1), data := '6F736D6F2D62747300'O }, { len := 10, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3300'O } }
TC_rach_load_idle_thresh0-RSL-IPA(248)@4499eccbfe40: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit }
MTC@4499eccbfe40: 3/4 RF Resource Indication(s) received
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Warning: dec_IpaUnitId(): Data remained at the end of the stream after successful decoding: '00'O
TC_rach_load_idle_thresh0-RSL(249)@4499eccbfe40: Mapped TRX#3 to TCP/IP conn_id=5
MTC@4499eccbfe40: 4/4 transceiver(s) connected
MTC@4499eccbfe40: 4/4 RF Resource Indication(s) received
[DEBUG] clck_gen.py:102 IND CLOCK 102
20251101060228324 DTRX INFO phy0.0: Clock indication: fn=102 (trx_if.c:138)
20251101060228324 DL1C INFO TRX Clock Ind: elapsed_us= 482604, elapsed_fn=102, error_us=+11874 (scheduler_trx.c:562)
20251101060228324 DL1C NOTICE GSM clock skew: old fn=0, new fn=102 (scheduler_trx.c:576)
20251101060228324 DL1P ERROR 000102/00/24/00/50 Invalid condition detected: Frame difference is 102-130=2715620 > 1! (l1sap.c:626)
20251101060228331 DL1P NOTICE PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251101060228331 DL1P NOTICE PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251101060228331 DL1P NOTICE GSMTAP: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251101060228356 DL1P NOTICE PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251101060228356 DL1P NOTICE PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251101060228356 DL1P NOTICE GSMTAP: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251101060228375 DL1P NOTICE PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251101060228375 DL1P NOTICE PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
20251101060228375 DL1P NOTICE GSMTAP: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 (sysinfo.c:162)
MTC@4499eccbfe40: Setting RSL_SYSTEM_INFO_3 (3): { header := { l2_plen := { l2_plen := 18, zero_one := '01'B }, skip_indicator := 0, rr_protocol_discriminator := 6, message_type := SYSTEM_INFORMATION_TYPE_3 (27) }, payload := { si3 := { cell_id := 23, lai := { mcc_mnc := '262F42'H, lac := 42 }, ctrl_chan_desc := { msc_r99 := true, att := true, bs_ag_blks_res := 1, ccch_conf := CCHAN_DESC_1CCCH_COMBINED (1), si22ind := false, cbq3 := CBQ3_IU_MODE_NOT_SUPPORTED (0), spare := '00'B, bs_pa_mfrms := 0, t3212 := 1 }, cell_options := { dn_ind := false, pwrc := false, dtx := MS_MAY_USE_UL_DTX (0), radio_link_tout_div4 := 7 }, cell_sel_par := { cell_resel_hyst_2dB := 2, ms_txpwr_max_cch := 7, acs := '0'B, neci := true, rxlev_access_min := 0 }, rach_control := { max_retrans := RACH_MAX_RETRANS_7 (3), tx_integer := '1001'B, cell_barr_access := false, re_not_allowed := true, acc := '0000010000000000'B }, rest_octets := { sel_params := { presence := '0'B, params := omit }, pwr_offset := { presence := '0'B, offset := omit }, si_2ter_ind := '0'B, early_cm_ind := '0'B, sched_where := { presence := '0'B, where := omit }, gprs_ind := { presence := '1'B, ind := { ra_colour := 0, si13_pos := '0'B } }, umts_early_cm_ind := '0'B, si2_quater_ind := { presence := '0'B, ind := omit }, iu_mode_ind := omit, si21_ind := { presence := '0'B, pos := omit } } } } }
MTC@4499eccbfe40: Setting RSL_SYSTEM_INFO_3 (3): '49061B001762F224002AC90001074740E504002C2B2B2B'O
MTC@4499eccbfe40: Setting RSL_SYSTEM_INFO_2 (2): { header := { l2_plen := { l2_plen := 22, zero_one := '01'B }, skip_indicator := 0, rr_protocol_discriminator := 6, message_type := SYSTEM_INFORMATION_TYPE_2 (26) }, payload := { si2 := { bcch_freq_list := '00000000000000000000000000000000'O, ncc_permitted := '11111111'B, rach_control := { max_retrans := RACH_MAX_RETRANS_7 (3), tx_integer := '1001'B, cell_barr_access := false, re_not_allowed := true, acc := '0000010000000000'B } } } }
MTC@4499eccbfe40: Setting RSL_SYSTEM_INFO_2 (2): '59061A00000000000000000000000000000000FFE50400'O
MTC@4499eccbfe40: Setting RSL_SYSTEM_INFO_4 (4): { header := { l2_plen := { l2_plen := 12, zero_one := '01'B }, skip_indicator := 0, rr_protocol_discriminator := 6, message_type := SYSTEM_INFORMATION_TYPE_4 (28) }, payload := { si4 := { lai := { mcc_mnc := '262F42'H, lac := 42 }, cell_sel_par := { cell_resel_hyst_2dB := 2, ms_txpwr_max_cch := 7, acs := '0'B, neci := true, rxlev_access_min := 0 }, rach_control := { max_retrans := RACH_MAX_RETRANS_7 (3), tx_integer := '1001'B, cell_barr_access := false, re_not_allowed := true, acc := '0000010000000000'B }, cbch_chan_desc := omit, cbch_mobile_alloc := omit, rest_octets := { sel_params := { presence := '0'B, params := omit }, pwr_offset := { presence := '0'B, offset := omit }, gprs_ind := { presence := '1'B, ind := { ra_colour := 0, si13_pos := '0'B } }, s_presence := '0'B, s := omit } } } }
MTC@4499eccbfe40: Setting RSL_SYSTEM_INFO_4 (4): '31061C62F224002A4740E50400012B2B2B2B2B2B2B2B2B'O
[DEBUG] fake_trx.py:272 (BTS@127.0.0.1:5700) Recv FAKE_TOA cmd
MTC@4499eccbfe40: Warning: dec_TrxcMessage(): Data remained at the end of the stream after successful decoding: '00'O
[DEBUG] fake_trx.py:291 (BTS@127.0.0.1:5700) Recv FAKE_RSSI cmd
20251101060228398 DRSL INFO (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO (rsl.c:3964)
20251101060228399 DRSL INFO  Rx RSL BCCH INFO (SI3, 23 bytes) (rsl.c:614)
20251101060228399 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state ACTIVE -> NONE (lchan.c:291)
20251101060228399 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Deactivating BCCH (scheduler.c:1070)
20251101060228399 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD NOHANDOVER 0 4' (trx_if.c:268)
20251101060228399 DL1C INFO (bts=0,trx=0,ts=0,ss=4) Activating BCCH (scheduler.c:1070)
20251101060228399 DL1C INFO (bts=0,trx=0,ts=0,ss=4) state NONE -> ACTIVE (lchan.c:291)
20251101060228399 DPCU NOTICE PCU socket not connected, dropping message (pcu_sock.c:1040)
20251101060228399 DPCU NOTICE Failed to send SI3 to PCU: rc=-5 (pcu_sock.c:830)
20251101060228399 DPAG INFO Paging SI update (paging.c:837)
[DEBUG] ctrl_if_trx.py:229 (BTS@127.0.0.1:5700) Ignore CMD NOHANDOVER
20251101060228399 DTRX INFO phy0.0: Response message: 'RSP NOHANDOVER 0 0 4' (trx_if.c:687)
20251101060228400 DRSL INFO (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO (rsl.c:3964)
20251101060228400 DRSL INFO  Rx RSL BCCH INFO (SI2, 23 bytes) (rsl.c:614)
20251101060228400 DPCU NOTICE PCU socket not connected, dropping message (pcu_sock.c:1040)
20251101060228400 DPCU NOTICE Failed to send SI2 to PCU: rc=-5 (pcu_sock.c:830)
20251101060228400 DPAG INFO Paging SI update (paging.c:837)
20251101060228401 DRSL INFO (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO (rsl.c:3964)
20251101060228401 DRSL INFO  Rx RSL BCCH INFO (SI4, 23 bytes) (rsl.c:614)
20251101060228401 DPAG INFO Paging SI update (paging.c:837)
MTC@4499eccbfe40: Warning: dec_TrxcMessage(): Data remained at the end of the stream after successful decoding: '00'O
[DEBUG] fake_trx.py:316 (BTS@127.0.0.1:5700) Recv FAKE_CI cmd
MTC@4499eccbfe40: Warning: dec_TrxcMessage(): Data remained at the end of the stream after successful decoding: '00'O
20251101060228797 DTRX INFO phy0.0: Clock indication: fn=204 (trx_if.c:138)
20251101060228797 DL1C INFO TRX Clock Ind: elapsed_us= 473178, elapsed_fn=102, error_us=+2448 (scheduler_trx.c:562)
20251101060228797 DL1C INFO GSM clock jitter: -2354us (elapsed_fn=0) (scheduler_trx.c:581)
[DEBUG] clck_gen.py:102 IND CLOCK 204
20251101060228845 DL1C INFO (bts=0,trx=0) ramping TRX board output power to 0 mdBm. (tx_power.c:181)
20251101060228845 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETPOWER 50' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (BTS@127.0.0.1:5700) Recv SETPOWER cmd
20251101060228846 DTRX INFO phy0.0: Response message: 'RSP SETPOWER 0 50' (trx_if.c:687)
20251101060228847 DL1C INFO (bts=0,trx=1) ramping TRX board output power to 0 mdBm. (tx_power.c:181)
20251101060228847 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETPOWER 50' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX1@127.0.0.1:5700/1) Recv SETPOWER cmd
20251101060228848 DTRX INFO phy0.1: Response message: 'RSP SETPOWER 0 50' (trx_if.c:687)
20251101060228849 DL1C INFO (bts=0,trx=2) ramping TRX board output power to 0 mdBm. (tx_power.c:181)
20251101060228849 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETPOWER 50' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX2@127.0.0.1:5700/2) Recv SETPOWER cmd
20251101060228849 DTRX INFO phy0.2: Response message: 'RSP SETPOWER 0 50' (trx_if.c:687)
20251101060228857 DL1C INFO (bts=0,trx=3) ramping TRX board output power to 0 mdBm. (tx_power.c:181)
20251101060228857 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETPOWER 50' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX3@127.0.0.1:5700/3) Recv SETPOWER cmd
20251101060228857 DTRX INFO phy0.3: Response message: 'RSP SETPOWER 0 50' (trx_if.c:687)
[DEBUG] clck_gen.py:102 IND CLOCK 306
20251101060229272 DTRX INFO phy0.0: Clock indication: fn=306 (trx_if.c:138)
20251101060229272 DL1C INFO TRX Clock Ind: elapsed_us= 474758, elapsed_fn=102, error_us=+4028 (scheduler_trx.c:562)
20251101060229272 DL1C INFO GSM clock jitter: -6336us (elapsed_fn=-1) (scheduler_trx.c:581)
20251101060229272 DL1C NOTICE We were 1 FN faster than TRX, compensating (scheduler_trx.c:591)
20251101060229329 DLSS7 ERROR Unable to route HMRT message: the AS as-clnt-msc-0 is down (osmo_ss7_hmrt.c:238)
20251101060229329 DLINP ERROR CLICONN(asp-clnt-msc-0,){CONNECTING} connect failed (-111) (stream_cli.c:423)
20251101060229750 DTRX INFO phy0.0: Clock indication: fn=408 (trx_if.c:138)
20251101060229750 DL1C INFO TRX Clock Ind: elapsed_us= 478824, elapsed_fn=102, error_us=+8094 (scheduler_trx.c:562)
20251101060229750 DL1C INFO GSM clock jitter: -8001us (elapsed_fn=-1) (scheduler_trx.c:581)
20251101060229750 DL1C NOTICE We were 1 FN faster than TRX, compensating (scheduler_trx.c:591)
[DEBUG] clck_gen.py:102 IND CLOCK 408
20251101060229846 DL1C INFO (bts=0,trx=0) ramping TRX board output power to 8000 mdBm. (tx_power.c:181)
20251101060229846 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETPOWER 42' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (BTS@127.0.0.1:5700) Recv SETPOWER cmd
20251101060229846 DTRX INFO phy0.0: Response message: 'RSP SETPOWER 0 42' (trx_if.c:687)
20251101060229848 DL1C INFO (bts=0,trx=1) ramping TRX board output power to 8000 mdBm. (tx_power.c:181)
20251101060229848 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETPOWER 42' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX1@127.0.0.1:5700/1) Recv SETPOWER cmd
20251101060229848 DTRX INFO phy0.1: Response message: 'RSP SETPOWER 0 42' (trx_if.c:687)
20251101060229850 DL1C INFO (bts=0,trx=2) ramping TRX board output power to 8000 mdBm. (tx_power.c:181)
20251101060229850 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETPOWER 42' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX2@127.0.0.1:5700/2) Recv SETPOWER cmd
20251101060229851 DTRX INFO phy0.2: Response message: 'RSP SETPOWER 0 42' (trx_if.c:687)
MTC@4499eccbfe40: setverdict(pass): none -> pass
20251101060229858 DL1C INFO (bts=0,trx=3) ramping TRX board output power to 8000 mdBm. (tx_power.c:181)
20251101060229858 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETPOWER 42' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX3@127.0.0.1:5700/3) Recv SETPOWER cmd
20251101060229858 DTRX INFO phy0.3: Response message: 'RSP SETPOWER 0 42' (trx_if.c:687)
[DEBUG] clck_gen.py:102 IND CLOCK 510
20251101060230232 DTRX INFO phy0.0: Clock indication: fn=510 (trx_if.c:138)
20251101060230233 DL1C INFO TRX Clock Ind: elapsed_us= 482134, elapsed_fn=102, error_us=+11404 (scheduler_trx.c:562)
20251101060230233 DL1C INFO GSM clock jitter: -11162us (elapsed_fn=-2) (scheduler_trx.c:581)
20251101060230233 DL1C NOTICE We were 2 FN faster than TRX, compensating (scheduler_trx.c:591)
20251101060230706 DTRX INFO phy0.0: Clock indication: fn=612 (trx_if.c:138)
20251101060230706 DL1C INFO TRX Clock Ind: elapsed_us= 473176, elapsed_fn=102, error_us=+2446 (scheduler_trx.c:562)
20251101060230706 DL1C INFO GSM clock jitter: -2216us (elapsed_fn=0) (scheduler_trx.c:581)
[DEBUG] clck_gen.py:102 IND CLOCK 612
20251101060230759 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
20251101060230759 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
20251101060230760 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
20251101060230760 DRSL INFO Tx RSL RF RESource INDication (rsl.c:517)
20251101060230846 DL1C INFO (bts=0,trx=0) ramping TRX board output power to 16000 mdBm. (tx_power.c:181)
20251101060230846 DTRX INFO phy0.0: Enqueuing TRX control command 'CMD SETPOWER 34' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (BTS@127.0.0.1:5700) Recv SETPOWER cmd
20251101060230847 DTRX INFO phy0.0: Response message: 'RSP SETPOWER 0 34' (trx_if.c:687)
20251101060230849 DL1C INFO (bts=0,trx=1) ramping TRX board output power to 16000 mdBm. (tx_power.c:181)
20251101060230849 DTRX INFO phy0.1: Enqueuing TRX control command 'CMD SETPOWER 34' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX1@127.0.0.1:5700/1) Recv SETPOWER cmd
20251101060230849 DTRX INFO phy0.1: Response message: 'RSP SETPOWER 0 34' (trx_if.c:687)
MTC@4499eccbfe40: setverdict(pass): pass -> pass, component reason not changed
20251101060230851 DL1C INFO (bts=0,trx=2) ramping TRX board output power to 16000 mdBm. (tx_power.c:181)
20251101060230851 DTRX INFO phy0.2: Enqueuing TRX control command 'CMD SETPOWER 34' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX2@127.0.0.1:5700/2) Recv SETPOWER cmd
20251101060230852 DTRX INFO phy0.2: Response message: 'RSP SETPOWER 0 34' (trx_if.c:687)
20251101060230859 DL1C INFO (bts=0,trx=3) ramping TRX board output power to 16000 mdBm. (tx_power.c:181)
20251101060230859 DTRX INFO phy0.3: Enqueuing TRX control command 'CMD SETPOWER 34' (trx_if.c:268)
[DEBUG] ctrl_if_trx.py:207 (TRX3@127.0.0.1:5700/3) Recv SETPOWER cmd
20251101060230859 DTRX INFO phy0.3: Response message: 'RSP SETPOWER 0 34' (trx_if.c:687)
[DEBUG] clck_gen.py:102 IND CLOCK 714
20251101060231177 DTRX INFO phy0.0: Clock indication: fn=714 (trx_if.c:138)
20251101060231178 DL1C INFO TRX Clock Ind: elapsed_us= 471849, elapsed_fn=102, error_us=+1119 (scheduler_trx.c:562)
20251101060231178 DL1C INFO GSM clock jitter: -3387us (elapsed_fn=0) (scheduler_trx.c:581)
[testenv][generic] Stopping podman container
[testenv][generic] + ['podman', 'kill', 'testenv-bts-all-osmocom-latest-20251101-0600-0dcc33e2-0']
testenv-bts-all-osmocom-latest-20251101-0600-0dcc33e2-0
Traceback (most recent call last):
  File "/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-latest/./testenv.py", line 133, in <module>
    main()
  File "/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-latest/./testenv.py", line 122, in main
    run()
  File "/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-latest/./testenv.py", line 79, in run
    testenv.testsuite.run(cfg)
  File "/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-latest/_testenv/testenv/testsuite.py", line 188, in run
    testenv.daemons.check_if_crashed()
  File "/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-latest/_testenv/testenv/daemons.py", line 125, in check_if_crashed
    testenv.testsuite.wait_until_test_stopped()
  File "/home/osmocom-build/jenkins/workspace/osmith-ttcn3-bts-test-latest/_testenv/testenv/testsuite.py", line 217, in wait_until_test_stopped
    raise testenv.NoTraceError("Timeout in wait_until_test_stopped()")
          ^^^^^^^^^^^^^^^^^^^^
AttributeError: module 'testenv' has no attribute 'NoTraceError'
[testenv][generic] Stopping testsuite (174479)
Error: container has already been removed
[testenv] feed_watchdog_loop: podman container has stopped
[testenv][generic] Logs saved to: https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bts-test-latest/17/artifact/logs/ 
+ RC=1
+ [ 1 = 0 ]
+ grep --color=always -o load.*
+ uptime
load average: 0.61, 0.63, 0.38
+ exit 1
Build step 'Execute shell' marked build as failure
Recording test results
[Checks API] No suitable checks publisher found.
Sending e-mails to: osmith@sysmocom.de
Archiving artifacts
Finished: FAILURE