#22 [ 7/28] RUN APT-GET update && apt-get install -y openssh-server
#22 CACHED
#23 [ 4/28] RUN usermod -a -G osmo-gsm-tester jenkins
#23 CACHED
#24 [14/28] RUN sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen && dpkg-reconfigure --frontend=noninteractive locales && update-locale LANG=en_US.UTF-8
#24 CACHED
#25 [12/28] RUN MKDIR -p /osmo-gsm-tester-srsue /osmo-gsm-tester-srsenb /osmo-gsm-tester-srsepc /osmo-gsm-tester-trx /osmo-gsm-tester-grbroker /osmo-gsm-tester-open5gs
#25 CACHED
#26 [16/28] RUN APT-GET update && apt-get install -y --no-install-recommends cmake libfftw3-dev libmbedtls-dev libboost-program-options-dev libconfig++-dev libsctp-dev libpcsclite-dev libuhd-dev libczmq-dev libsoapysdr-dev soapysdr-module-lms7 && apt-get clean
#26 CACHED
#27 [19/28] RUN IF [ "$(arch)" = "x86_64" ]; then apt-get update && apt-get install -y --no-install-recommends python3-pip python3-setuptools python3-wheel ninja-build build-essential flex bison git libsctp-dev libgnutls28-dev libgcrypt-dev libssl-dev libidn11-dev libmongoc-dev libbson-dev libyaml-dev libnghttp2-dev libmicrohttpd-dev libcurl4-gnutls-dev libnghttp2-dev meson && apt-get clean; fi
#27 CACHED
#28 [ 5/28] RUN APT-GET update && apt-get install -y --no-install-recommends cpio dbus tcpdump sqlite3 python3 python3-setuptools python3-yaml python3-mako python3-gi python3-numpy python3-wheel python3-watchdog ofono patchelf rpm2cpio sudo libcap2-bin python3-pip udhcpc iperf3 locales
#28 CACHED
#29 [ 2/28] RUN useradd -ms /bin/bash jenkins
#29 CACHED
#30 [ 9/28] COPY SSH /root/.ssh
#30 CACHED
#31 [11/28] RUN chmod -R 0700 /home/jenkins/.ssh /root/.ssh
#31 CACHED
#32 [17/28] RUN APT-GET update && apt-get install -y --no-install-recommends gnuradio && apt-get clean
#32 CACHED
#33 [28/28] WORKDIR /DATA
#33 CACHED
#34 exporting to image
#34 exporting layers done
#34 writing image sha256:9cfee64671f6d6a8c94a1a7181514fda7572443599b7904e064f14c5e3a23ee1 0.0s done
#34 naming to docker.io/osmocom-build/osmo-gsm-tester:latest 0.0s done
#34 DONE 0.0s
rm -rf .common
make: Leaving directory '/home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bts/docker-playground/osmo-gsm-tester'
+ docker run --rm -v /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bts:/build -v /opt/poky-sdk:/opt/poky-sdk -v /opt/poky-oc2g:/opt/poky-oc2g --user build osmocom-build/osmo-gsm-tester sh -e -x -c
cd /build
./osmo-gsm-tester/contrib/jenkins-build-osmo-bts.sh
+ cd /build
+ ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts.sh
+ base=/build
+ name=osmo-bts
+ dirname ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts.sh
+ . ./osmo-gsm-tester/contrib/jenkins-build-common.sh
+ [ -z osmo-bts -o -z /build ]
+ git_url=https://gerrit.osmocom.org
+ prefix=/build/inst-osmo-bts
+ prefix_real=/build/inst-osmo-bts
+ SANITIZE_FLAGS=--enable-sanitize
+ export PKG_CONFIG_PATH=/build/inst-osmo-bts/lib/pkgconfig:
+ export LD_LIBRARY_PATH=/build/inst-osmo-bts/lib:
+ env
+ grep -v ^LESS
+ sort
HOME=/build
HOSTNAME=227aecab909d
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/build/inst-osmo-bts/lib:
OLDPWD=/data
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PKG_CONFIG_PATH=/build/inst-osmo-bts/lib/pkgconfig:
PWD=/build
+ rm -f /build/osmo-bts.build-2024-12-14_23_24_05.tgz
+ rm -f /build/osmo-bts.build-2024-12-14_23_24_05.md5
+ rm -rf /build/inst-osmo-bts
+ mkdir -p /build/inst-osmo-bts
+ git_url=https://gitea.osmocom.org/cellular-infrastructure
+ have_repo octphy-2g-headers
+ repo=octphy-2g-headers
+ branch=master
+ echo OSMO_GSM_TESTER_BUILD_octphy-2g-headers
+ sed s/-/_/g
+ branch_override_var=OSMO_GSM_TESTER_BUILD_octphy_2g_headers
+ eval echo $OSMO_GSM_TESTER_BUILD_octphy_2g_headers
+ echo
+ branch_override=
+ [ -n ]
+ cd /build
+ [ -d octphy-2g-headers ]
+ cd octphy-2g-headers
+ git fetch
+ git rev-parse origin/master
2416c53c7f5bd70325d7c05f1df79ccb8d018d2e
+ branch=origin/master
+ git checkout -B build_branch origin/master
Reset branch 'build_branch'
branch 'build_branch' set up to track 'origin/master'.
Your branch is up to date with 'origin/master'.
+ rm -rf README octdev_devices.h octdev_devices_swap.h octdev_macro.h octdev_opus_rev.h octdev_rc_base.h octdev_types.h octdev_types_swap.h octoptions.h octphy octpkt octvc1
+ git reset --hard origin/master
HEAD is now at 2416c53 Import headers from OCTSDR-OPENBSC-02.11.00-B1322.tgz
+ git rev-parse HEAD
2416c53c7f5bd70325d7c05f1df79ccb8d018d2e
+ git rev-parse HEAD
+ echo 2416c53c7f5bd70325d7c05f1df79ccb8d018d2e octphy-2g-headers
+ git submodule update --init
+ cd /build
+ build_repo libosmocore --enable-sanitize --disable-doxygen --disable-uring
+ dir=libosmocore
+ shift
+ build_repo_dir libosmocore ./ --enable-sanitize --disable-doxygen --disable-uring
+ dep=libosmocore
+ dir=./
+ branch=master
+ echo --enable-sanitize
+ grep ^-
+ [ -z --enable-sanitize ]
+ shift
+ shift
+ configure_opts=--enable-sanitize --disable-doxygen --disable-uring
+ set +x
====================== libosmocore
+ have_repo libosmocore master
+ repo=libosmocore
+ branch=master
+ echo OSMO_GSM_TESTER_BUILD_libosmocore
+ sed s/-/_/g
+ branch_override_var=OSMO_GSM_TESTER_BUILD_libosmocore
+ eval echo $OSMO_GSM_TESTER_BUILD_libosmocore
+ echo
+ branch_override=
+ [ -n ]
+ cd /build
+ [ -d libosmocore ]
+ cd libosmocore
+ git fetch
+ git rev-parse origin/master
fc032cd8a19f8cefd20258f32282567cda5e49bf
+ branch=origin/master
+ git checkout -B build_branch origin/master
Reset branch 'build_branch'
branch 'build_branch' set up to track 'origin/master'.
Your branch is up to date with 'origin/master'.
+ rm -rf COPYING Doxyfile.codec Doxyfile.codec.in Doxyfile.coding Doxyfile.coding.in Doxyfile.core.in Doxyfile.ctrl Doxyfile.ctrl.in Doxyfile.gb Doxyfile.gb.in Doxyfile.gsm Doxyfile.gsm.in Doxyfile.isdn Doxyfile.isdn.in Doxyfile.sim Doxyfile.sim.in Doxyfile.usb Doxyfile.usb.in Doxyfile.vty Doxyfile.vty.in Makefile Makefile.am Makefile.in README.md TODO-RELEASE aclocal.m4 autom4te.cache compile config.guess config.h config.h.in config.log config.status config.sub configure configure.ac contrib debian depcomp doc git-version-gen include install-sh libosmocodec.pc libosmocodec.pc.in libosmocoding.pc libosmocoding.pc.in libosmocore.pc libosmocore.pc.in libosmoctrl.pc libosmoctrl.pc.in libosmogb.pc libosmogb.pc.in libosmogsm.pc libosmogsm.pc.in libosmoisdn.pc libosmoisdn.pc.in libosmosim.pc libosmosim.pc.in libosmousb.pc libosmousb.pc.in libosmovty.pc libosmovty.pc.in libtool ltmain.sh m4 missing osmo-release.mk osmo-release.sh src stamp-h1 tapset tests utils
+ git reset --hard origin/master
HEAD is now at fc032cd8 osmo_io: Log current queue length upon enqueue failure
+ git rev-parse HEAD
fc032cd8a19f8cefd20258f32282567cda5e49bf
+ git rev-parse HEAD
+ echo fc032cd8a19f8cefd20258f32282567cda5e49bf libosmocore
+ git submodule update --init
+ cd /build
+ cd libosmocore/./
+ [ -f configure.ac ]
+ set +x
+ autoreconf -fi
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:70: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:70: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:70: the top level
configure.ac:84: warning: $as_echo is obsolete; use AS_ECHO(["message"]) instead
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from...
m4/ax_pthread.m4:88: AX_PTHREAD is expanded from...
configure.ac:84: the top level
configure.ac:174: warning: The macro `AC_CONFIG_HEADER' is obsolete.
configure.ac:174: You should run autoupdate.
./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from...
configure.ac:174: the top level
configure.ac:462: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:462: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:462: the top level
configure.ac:602: warning: AC_OUTPUT should be used without arguments.
configure.ac:602: You should run autoupdate.
configure.ac:23: installing './compile'
configure.ac:25: installing './config.guess'
configure.ac:25: installing './config.sub'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
Makefile.am:64: warning: DOXYGEN was already defined in condition TRUE, which includes condition !HAVE_DOXYGEN ...
configure.ac:116: ... 'DOXYGEN' previously defined here
src/codec/Makefile.am: installing './depcomp'
+ set +x
+ ./configure --prefix=/build/inst-osmo-bts --with-systemdsystemunitdir=no --enable-sanitize --disable-doxygen --disable-uring
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for execinfo.h... yes
checking for poll.h... yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/signalfd.h... yes
checking for sys/eventfd.h... yes
checking for sys/timerfd.h... yes
checking for syslog.h... yes
checking for ctype.h... yes
checking for netinet/tcp.h... yes
checking for netinet/in.h... yes
checking for gcc options needed to detect all undeclared functions... none needed
checking whether HAVE_SYS_SOCKET_H is declared... yes
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for library containing dlopen... none required
checking for library containing dlsym... none required
checking for backtrace in -lexecinfo... no
checking how to run the C preprocessor... gcc -E
checking whether gcc is Clang... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking whether more special flags are required for pthreads... no
checking for PTHREAD_PRIO_INHERIT... yes
checking for pthread_getname_np(pthread_t, char*, size_t)... yes
checking for library containing clock_gettime... none required
checking for doxygen... /usr/bin/doxygen
checking whether SYS_getrandom is declared... yes
checking if gcc supports -fvisibility=hidden... yes
checking for localtime_r... yes
checking whether struct tm has tm_gmtoff member... yes
checking for gettid... yes
checking whether to workaround TLS bug in old gcc on ARM platforms...
checking for talloc >= 2.1.0... yes
checking for libpcsclite... yes
checking for libusb-1.0... yes
checking for gnutls >= 2.12.0... yes
checking for libmnl... yes
checking for libsctp... yes
checking whether to enable VTY/CTRL tests... no
checking whether C compiler accepts -mavx2... yes
checking whether C compiler accepts -mssse3... yes
checking whether C compiler accepts -msse4.1... yes
checking whether to enable ARM NEON instructions support... no
checking whether to include systemtap tracing support... no
checking whether to build with code coverage support... no
checking whether gcc has __builtin_cpu_supports built-in... yes
checking for struct tcp_info.tcpi_notsent_bytes... yes
checking for struct tcp_info.tcpi_rwnd_limited... yes
checking for struct tcp_info.tcpi_sndbuf_limited... yes
checking for struct tcp_info.tcpi_reord_seen... yes
CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmocore.pc
config.status: creating libosmocodec.pc
config.status: creating libosmocoding.pc
config.status: creating libosmovty.pc
config.status: creating libosmogsm.pc
config.status: creating libosmoisdn.pc
config.status: creating libosmogb.pc
config.status: creating libosmoctrl.pc
config.status: creating libosmosim.pc
config.status: creating libosmousb.pc
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/codec/Makefile
config.status: creating include/osmocom/coding/Makefile
config.status: creating include/osmocom/core/Makefile
config.status: creating include/osmocom/crypt/Makefile
config.status: creating include/osmocom/ctrl/Makefile
config.status: creating include/osmocom/gprs/Makefile
config.status: creating include/osmocom/gprs/protocol/Makefile
config.status: creating include/osmocom/gsm/Makefile
config.status: creating include/osmocom/gsm/protocol/Makefile
config.status: creating include/osmocom/isdn/Makefile
config.status: creating include/osmocom/sim/Makefile
config.status: creating include/osmocom/usb/Makefile
config.status: creating include/osmocom/vty/Makefile
config.status: creating src/Makefile
config.status: creating src/core/Makefile
config.status: creating src/vty/Makefile
config.status: creating src/codec/Makefile
config.status: creating src/coding/Makefile
config.status: creating src/sim/Makefile
config.status: creating src/usb/Makefile
config.status: creating src/gsm/Makefile
config.status: creating src/isdn/Makefile
config.status: creating src/gb/Makefile
config.status: creating src/ctrl/Makefile
config.status: creating src/pseudotalloc/Makefile
config.status: creating tapset/Makefile
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating utils/Makefile
config.status: creating utils/osmo-stat-dummy/Makefile
config.status: creating Doxyfile.core
config.status: creating Doxyfile.gsm
config.status: creating Doxyfile.isdn
config.status: creating Doxyfile.vty
config.status: creating Doxyfile.codec
config.status: creating Doxyfile.coding
config.status: creating Doxyfile.gb
config.status: creating Doxyfile.ctrl
config.status: creating Doxyfile.sim
config.status: creating Doxyfile.usb
config.status: creating Makefile
config.status: creating contrib/libosmocore.spec
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
+ set +x
+ make -j8
make all-recursive
make[1]: Entering directory '/build/libosmocore'
Making all in include
make[2]: Entering directory '/build/libosmocore/include'
Making all in osmocom
make[3]: Entering directory '/build/libosmocore/include/osmocom'
Making all in core
make[4]: Entering directory '/build/libosmocore/include/osmocom/core'
GEN bit16gen.h
GEN bit64gen.h
GEN crc16gen.h
GEN bit32gen.h
GEN crc32gen.h
GEN crc8gen.h
GEN crc64gen.h
GEN socket_compat.h
GEN bit16gen.h
GEN crc16gen.h
GEN bit64gen.h
GEN crc32gen.h
GEN bit32gen.h
GEN socket_compat.h
GEN crc8gen.h
GEN crc64gen.h
make[4]: Leaving directory '/build/libosmocore/include/osmocom/core'
Making all in vty
make[4]: Entering directory '/build/libosmocore/include/osmocom/vty'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom/vty'
Making all in codec
make[4]: Entering directory '/build/libosmocore/include/osmocom/codec'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom/codec'
Making all in gsm
make[4]: Entering directory '/build/libosmocore/include/osmocom/gsm'
GEN gsm0503.h
Generating header file...
Generate 'xcch' declaration
Generate 'tch_f24' declaration
Generate 'tch_h24' declaration
Generate 'tch_f48' declaration
Generate 'tch_f96' declaration
Generate 'tch_f144' declaration
Generate 'rach' declaration
Generate 'rach_ext' declaration
Generate 'sch' declaration
Generate 'cs2' declaration
Generate 'cs3' declaration
Generate 'cs2_np' declaration
Generate 'cs3_np' declaration
Generate 'tch_afs_12_2' declaration
Generate 'tch_afs_10_2' declaration
Generate 'tch_afs_7_95' declaration
Generate 'tch_afs_7_4' declaration
Generate 'tch_afs_6_7' declaration
Generate 'tch_afs_5_9' declaration
Generate 'tch_afs_5_15' declaration
Generate 'tch_afs_4_75' declaration
Generate 'tch_fr' declaration
Generate 'tch_hr' declaration
Generate 'tch_ahs_7_95' declaration
Generate 'tch_ahs_7_4' declaration
Generate 'tch_ahs_6_7' declaration
Generate 'tch_ahs_5_9' declaration
Generate 'tch_ahs_5_15' declaration
Generate 'tch_ahs_4_75' declaration
Generate 'tch_axs_sid_update' declaration
Generate 'mcs1_dl_hdr' declaration
Generate 'mcs1_ul_hdr' declaration
Generate 'mcs1' declaration
Generate 'mcs2' declaration
Generate 'mcs3' declaration
Generate 'mcs4' declaration
Generate 'mcs5_dl_hdr' declaration
Generate 'mcs5_ul_hdr' declaration
Generate 'mcs5' declaration
Generate 'mcs6' declaration
Generate 'mcs7_dl_hdr' declaration
Generate 'mcs7_ul_hdr' declaration
Generate 'mcs7' declaration
Generate 'mcs8' declaration
Generate 'mcs9' declaration
Generation complete.
make all-recursive
make[5]: Entering directory '/build/libosmocore/include/osmocom/gsm'
Making all in protocol
make[6]: Entering directory '/build/libosmocore/include/osmocom/gsm/protocol'
make[6]: Nothing to be done for 'all'.
make[6]: Leaving directory '/build/libosmocore/include/osmocom/gsm/protocol'
make[6]: Entering directory '/build/libosmocore/include/osmocom/gsm'
make[6]: Nothing to be done for 'all-am'.
make[6]: Leaving directory '/build/libosmocore/include/osmocom/gsm'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/gsm'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/gsm'
Making all in isdn
make[4]: Entering directory '/build/libosmocore/include/osmocom/isdn'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom/isdn'
Making all in crypt
make[4]: Entering directory '/build/libosmocore/include/osmocom/crypt'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom/crypt'
Making all in coding
make[4]: Entering directory '/build/libosmocore/include/osmocom/coding'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom/coding'
Making all in gprs
make[4]: Entering directory '/build/libosmocore/include/osmocom/gprs'
Making all in protocol
make[5]: Entering directory '/build/libosmocore/include/osmocom/gprs/protocol'
make[5]: Nothing to be done for 'all'.
make[5]: Leaving directory '/build/libosmocore/include/osmocom/gprs/protocol'
make[5]: Entering directory '/build/libosmocore/include/osmocom/gprs'
make[5]: Nothing to be done for 'all-am'.
make[5]: Leaving directory '/build/libosmocore/include/osmocom/gprs'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/gprs'
Making all in ctrl
make[4]: Entering directory '/build/libosmocore/include/osmocom/ctrl'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom/ctrl'
Making all in sim
make[4]: Entering directory '/build/libosmocore/include/osmocom/sim'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom/sim'
Making all in usb
make[4]: Entering directory '/build/libosmocore/include/osmocom/usb'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom/usb'
make[4]: Entering directory '/build/libosmocore/include/osmocom'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/libosmocore/include/osmocom'
make[3]: Leaving directory '/build/libosmocore/include/osmocom'
make[3]: Entering directory '/build/libosmocore/include'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/libosmocore/include'
make[2]: Leaving directory '/build/libosmocore/include'
Making all in src
make[2]: Entering directory '/build/libosmocore/src'
Making all in core
make[3]: Entering directory '/build/libosmocore/src/core'
GEN crc8gen.c
GEN crc64gen.c
GEN crc32gen.c
GEN crc16gen.c
make all-am
make[4]: Entering directory '/build/libosmocore/src/core'
CC application.lo
CC backtrace.lo
CC bits.lo
CC base64.lo
CC bitvec.lo
CC context.lo
CC bitcomp.lo
CC conv.lo
CC conv_acc.lo
CC conv_acc_generic.lo
CC counter.lo
CC crc16.lo
CC crc8gen.lo
CC crc16gen.lo
CC crc32gen.lo
CC crc64gen.lo
CC exec.lo
CC gsmtap_util.lo
CC fsm.lo
CC isdnhdlc.lo
CC it_q.lo
CC logging.lo
CC logging_syslog.lo
CC logging_gsmtap.lo
CC loggingrb.lo
CC macaddr.lo
CC msgb.lo
CC netdev.lo
CC netns.lo
CC osmo_io.lo
CC osmo_io_poll.lo
CC panic.lo
CC prbs.lo
CC prim.lo
CC rate_ctr.lo
CC rbtree.lo
CC select.lo
CC sercomm.lo
CC signal.lo
CC sockaddr_str.lo
CC socket.lo
CC soft_uart.lo
CC stat_item.lo
CC stats.lo
CC stats_statsd.lo
CC stats_tcp.lo
CC strrb.lo
CC tdef.lo
CC thread.lo
CC time_cc.lo
CC timer.lo
CC timer_gettimeofday.lo
CC timer_clockgettime.lo
CC tun.lo
CC use_count.lo
CC utils.lo
CC write_queue.lo
CC conv_acc_sse.lo
CC conv_acc_sse_avx.lo
CC plugin.lo
CC msgfile.lo
CC serial.lo
CC mnl.lo
CCLD libosmocore.la
make[4]: Leaving directory '/build/libosmocore/src/core'
make[3]: Leaving directory '/build/libosmocore/src/core'
Making all in vty
make[3]: Entering directory '/build/libosmocore/src/vty'
CC buffer.lo
CC command.lo
CC vector.lo
CC vty.lo
CC utils.lo
CC telnet_interface.lo
CC logging_vty.lo
CC stats_vty.lo
CC talloc_ctx_vty.lo
CC fsm_vty.lo
CC cpu_sched_vty.lo
CC tdef_vty.lo
CCLD libosmovty.la
make[3]: Leaving directory '/build/libosmocore/src/vty'
Making all in isdn
make[3]: Entering directory '/build/libosmocore/src/isdn'
CC i460_mux.lo
CC v110.lo
CC lapd_core.lo
CC v110_ta.lo
CCLD libisdnint.la
CCLD libosmoisdn.la
make[3]: Leaving directory '/build/libosmocore/src/isdn'
Making all in codec
make[3]: Entering directory '/build/libosmocore/src/codec'
CC gsm610.lo
CC gsm620.lo
CC gsm660.lo
CC gsm690.lo
CC ecu.lo
CC hr_sid_class.lo
CC ecu_fr.lo
CC ecu_fr_old.lo
CCLD libosmocodec.la
make[3]: Leaving directory '/build/libosmocore/src/codec'
Making all in gsm
make[3]: Entering directory '/build/libosmocore/src/gsm'
GEN gsm0503_conv.c
Generating convolutional codes...
Generate 'xcch' definition
Generate 'tch_f24' definition
Generate 'tch_h24' definition
Generate 'tch_f48' definition
Generate 'tch_f96' definition
Generate 'tch_f144' definition
Generate 'rach' definition
Generate 'rach_ext' definition
Generate 'sch' definition
Generate 'cs2' definition
Generate 'cs3' definition
Generate 'cs2_np' definition
Generate 'cs3_np' definition
Generate 'tch_afs_12_2' definition
Generate 'tch_afs_10_2' definition
Generate 'tch_afs_7_95' definition
Generate 'tch_afs_7_4' definition
Generate 'tch_afs_6_7' definition
Generate 'tch_afs_5_9' definition
Generate 'tch_afs_5_15' definition
Generate 'tch_afs_4_75' definition
Generate 'tch_fr' definition
Generate 'tch_hr' definition
Generate 'tch_ahs_7_95' definition
Generate 'tch_ahs_7_4' definition
Generate 'tch_ahs_6_7' definition
Generate 'tch_ahs_5_9' definition
Generate 'tch_ahs_5_15' definition
Generate 'tch_ahs_4_75' definition
Generate 'tch_axs_sid_update' definition
Generate 'mcs1_dl_hdr' definition
Generate 'mcs1_ul_hdr' definition
Generate 'mcs1' definition
Generate 'mcs2' definition
Generate 'mcs3' definition
Generate 'mcs4' definition
Generate 'mcs5_dl_hdr' definition
Generate 'mcs5_ul_hdr' definition
Generate 'mcs5' definition
Generate 'mcs6' definition
Generate 'mcs7_dl_hdr' definition
Generate 'mcs7_ul_hdr' definition
Generate 'mcs7' definition
Generate 'mcs8' definition
Generate 'mcs9' definition
Generation complete.
make all-am
make[4]: Entering directory '/build/libosmocore/src/gsm'
CC rxlev_stat.lo
CC a5.lo
CC comp128v23.lo
CC tlv_parser.lo
CC comp128.lo
CC rsl.lo
CC gsm_utils.lo
CC gsm48.lo
gsm_utils.c:106:9: note: '#pragma message: glibc 2.36 random detected'
106 | #pragma message ("glibc " OSMO_STRINGIFY_VAL(__GLIBC__) "." OSMO_STRINGIFY_VAL(__GLIBC_MINOR__) " random detected")
| ^~~~~~~
CC gsm48_arfcn_range_encode.lo
CC gsm48_ie.lo
CC gsm0808.lo
CC sysinfo.lo
CC gprs_cipher_core.lo
CC gprs_rlc.lo
CC gsm0480.lo
CC abis_nm.lo
CC gsm0502.lo
CC gsm0411_utils.lo
CC gsm0411_smc.lo
CC gsm0411_smr.lo
CC gsm0414.lo
CC lapdm.lo
CC kasumi.lo
CC gsm29205.lo
CC gsm_04_08_gprs.lo
CC auth_core.lo
CC auth_comp128v1.lo
CC auth_comp128v23.lo
CC auth_xor.lo
CC auth_xor_2g.lo
CC auth_milenage.lo
CC gea.lo
CC milenage/aes-internal.lo
CC milenage/aes-internal-enc.lo
CC milenage/milenage.lo
CC gan.lo
CC ipa.lo
CC gsm0341.lo
CC apn.lo
CC auth_tuak.lo
CC gprs_gea.lo
CC gsm0503_conv.lo
CC oap.lo
CC gsm0808_utils.lo
CC gsm23003.lo
CC mncc.lo
CC gsm23236.lo
CC bts_features.lo
CC oap_client.lo
CC gsm29118.lo
CC gsm48_rest_octets.lo
CC cbsp.lo
CC gsm48049.lo
CC gad.lo
CC bsslap.lo
CC bssmap_le.lo
CC kdf.lo
CC iuup.lo
CC gsm44021.lo
CC gsm44068.lo
CC rlp.lo
CC gsup.lo
CC gsup_sms.lo
CC milenage/aes-encblock.lo
CC tuak/KeccakP-1600-3gpp.lo
CC tuak/tuak.lo
CCLD libgsmint.la
CCLD libosmogsm.la
make[4]: Leaving directory '/build/libosmocore/src/gsm'
make[3]: Leaving directory '/build/libosmocore/src/gsm'
Making all in coding
make[3]: Entering directory '/build/libosmocore/src/coding'
CC gsm0503_interleaving.lo
CC gsm0503_mapping.lo
CC gsm0503_parity.lo
CC gsm0503_tables.lo
CC gsm0503_coding.lo
CC gsm0503_amr_dtx.lo
CCLD libosmocoding.la
make[3]: Leaving directory '/build/libosmocore/src/coding'
Making all in gb
make[3]: Entering directory '/build/libosmocore/src/gb'
CC gprs_ns.lo
CC gprs_ns_frgre.lo
CC gprs_ns_vty.lo
CC gprs_bssgp.lo
CC gprs_ns_sns.lo
CC gprs_bssgp_vty.lo
CC gprs_bssgp_util.lo
CC gprs_bssgp_rim.lo
CC gprs_bssgp_bss.lo
CC gprs_ns2.lo
CC gprs_ns2_udp.lo
CC gprs_ns2_frgre.lo
CC gprs_ns2_fr.lo
CC gprs_ns2_vc_fsm.lo
CC gprs_ns2_sns.lo
CC gprs_ns2_message.lo
CC gprs_ns2_vty.lo
CC gprs_bssgp2.lo
CC bssgp_bvc_fsm.lo
CC common_vty.lo
CC frame_relay.lo
CCLD libosmogb-test.la
CCLD libosmogb.la
make[3]: Leaving directory '/build/libosmocore/src/gb'
Making all in ctrl
make[3]: Entering directory '/build/libosmocore/src/ctrl'
CC control_cmd.lo
CC fsm_ctrl_commands.lo
CC control_if.lo
CC control_vty.lo
CCLD libosmoctrl.la
make[3]: Leaving directory '/build/libosmocore/src/ctrl'
Making all in pseudotalloc
make[3]: Entering directory '/build/libosmocore/src/pseudotalloc'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/libosmocore/src/pseudotalloc'
Making all in sim
make[3]: Entering directory '/build/libosmocore/src/sim'
CC core.lo
CC reader.lo
CC card_fs_sim.lo
CC class_tables.lo
CC card_fs_usim.lo
CC card_fs_uicc.lo
CC card_fs_hpsim.lo
CC card_fs_isim.lo
CC card_fs_tetra.lo
CC reader_pcsc.lo
CCLD libosmosim.la
make[3]: Leaving directory '/build/libosmocore/src/sim'
Making all in usb
make[3]: Entering directory '/build/libosmocore/src/usb'
CC osmo_libusb.lo
CCLD libosmousb.la
make[3]: Leaving directory '/build/libosmocore/src/usb'
make[3]: Entering directory '/build/libosmocore/src'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/libosmocore/src'
make[2]: Leaving directory '/build/libosmocore/src'
Making all in utils
make[2]: Entering directory '/build/libosmocore/utils'
make[3]: Entering directory '/build/libosmocore/utils'
CC osmo-arfcn.o
CC osmo-aka-verify.o
CC osmo-config-merge.o
CC osmo-auc-gen.o
CC osmo_sim_test-osmo-sim-test.o
CC gsmtap-logsend.o
CC osmo-ns-dummy.o
CC osmo-ns-dummy-vty.o
CCLD osmo-arfcn
CCLD osmo-gsmtap-logsend
CCLD osmo-aka-verify
CCLD osmo-config-merge
CCLD osmo-auc-gen
CCLD osmo-ns-dummy
CCLD osmo-sim-test
make[3]: Leaving directory '/build/libosmocore/utils'
make[2]: Leaving directory '/build/libosmocore/utils'
Making all in tapset
make[2]: Entering directory '/build/libosmocore/tapset'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/libosmocore/tapset'
Making all in tests
make[2]: Entering directory '/build/libosmocore/tests'
GEN conv/gsm0503_test_vectors.c
Generating test vectors...
Generate 'xcch' test vector
Generate 'tch_f24' test vector
Generate 'tch_h24' test vector
Generate 'tch_f48' test vector
Generate 'tch_f96' test vector
Generate 'tch_f144' test vector
Generate 'rach' test vector
Generate 'rach_ext' test vector
Generate 'sch' test vector
Generate 'cs2' test vector
Generate 'cs3' test vector
Generate 'cs2_np' test vector
Generate 'cs3_np' test vector
Generate 'tch_afs_12_2' test vector
Generate 'tch_afs_10_2' test vector
Generate 'tch_afs_7_95' test vector
Generate 'tch_afs_7_4' test vector
Generate 'tch_afs_6_7' test vector
Generate 'tch_afs_5_9' test vector
Generate 'tch_afs_5_15' test vector
Generate 'tch_afs_4_75' test vector
Generate 'tch_fr' test vector
Generate 'tch_hr' test vector
Generate 'tch_ahs_7_95' test vector
Generate 'tch_ahs_7_4' test vector
Generate 'tch_ahs_6_7' test vector
Generate 'tch_ahs_5_9' test vector
Generate 'tch_ahs_5_15' test vector
Generate 'tch_ahs_4_75' test vector
Generate 'tch_axs_sid_update' test vector
Generate 'mcs1_dl_hdr' test vector
Generate 'mcs1_ul_hdr' test vector
Generate 'mcs1' test vector
Generate 'mcs2' test vector
Generate 'mcs3' test vector
Generate 'mcs4' test vector
Generate 'mcs5_dl_hdr' test vector
Generate 'mcs5_ul_hdr' test vector
Generate 'mcs5' test vector
Generate 'mcs6' test vector
Generate 'mcs7_dl_hdr' test vector
Generate 'mcs7_ul_hdr' test vector
Generate 'mcs7' test vector
Generate 'mcs8' test vector
Generate 'mcs9' test vector
Generation complete.
make all-am
make[3]: Entering directory '/build/libosmocore/tests'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/libosmocore/tests'
make[2]: Leaving directory '/build/libosmocore/tests'
make[2]: Entering directory '/build/libosmocore'
make[2]: Leaving directory '/build/libosmocore'
make[1]: Leaving directory '/build/libosmocore'
+ set +x
+ make install
make install-recursive
make[1]: Entering directory '/build/libosmocore'
Making install in include
make[2]: Entering directory '/build/libosmocore/include'
Making install in osmocom
make[3]: Entering directory '/build/libosmocore/include/osmocom'
Making install in core
make[4]: Entering directory '/build/libosmocore/include/osmocom/core'
make[5]: Entering directory '/build/libosmocore/include/osmocom/core'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/core'
/usr/bin/install -c -m 644 application.h backtrace.h base64.h bit16gen.h bit32gen.h bit64gen.h bits.h bitvec.h bitcomp.h byteswap.h conv.h counter.h crc16.h crc16gen.h crc32gen.h crc64gen.h crc8gen.h crcgen.h endian.h defs.h exec.h fsm.h gsmtap.h gsmtap_util.h hash.h hashtable.h isdnhdlc.h it_q.h jhash.h linuxlist.h linuxrbtree.h log2.h logging.h loggingrb.h stats.h macaddr.h msgb.h netdev.h netns.h osmo_io.h '/build/inst-osmo-bts/include/osmocom/core'
/usr/bin/install -c -m 644 panic.h prbs.h prim.h process.h rate_ctr.h stat_item.h stats_tcp.h select.h sercomm.h signal.h socket.h statistics.h strrb.h talloc.h tdef.h thread.h timer.h timer_compat.h tun.h utils.h write_queue.h sockaddr_str.h soft_uart.h time_cc.h use_count.h socket_compat.h plugin.h msgfile.h serial.h mnl.h '/build/inst-osmo-bts/include/osmocom/core'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/core'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/core'
Making install in vty
make[4]: Entering directory '/build/libosmocore/include/osmocom/vty'
make[5]: Entering directory '/build/libosmocore/include/osmocom/vty'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/vty'
/usr/bin/install -c -m 644 buffer.h command.h logging.h stats.h misc.h telnet_interface.h vector.h vty.h ports.h cpu_sched_vty.h tdef_vty.h '/build/inst-osmo-bts/include/osmocom/vty'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/vty'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/vty'
Making install in codec
make[4]: Entering directory '/build/libosmocore/include/osmocom/codec'
make[5]: Entering directory '/build/libosmocore/include/osmocom/codec'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/codec'
/usr/bin/install -c -m 644 ecu.h codec.h gsm610_bits.h '/build/inst-osmo-bts/include/osmocom/codec'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/codec'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/codec'
Making install in gsm
make[4]: Entering directory '/build/libosmocore/include/osmocom/gsm'
make install-recursive
make[5]: Entering directory '/build/libosmocore/include/osmocom/gsm'
Making install in protocol
make[6]: Entering directory '/build/libosmocore/include/osmocom/gsm/protocol'
make[7]: Entering directory '/build/libosmocore/include/osmocom/gsm/protocol'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/gsm/protocol'
/usr/bin/install -c -m 644 gsm_23_032.h gsm_03_40.h gsm_03_41.h gsm_04_08.h gsm_04_08_gprs.h gsm_04_11.h gsm_04_12.h gsm_04_14.h gsm_04_80.h gsm_08_08.h gsm_08_58.h gsm_09_02.h gsm_12_21.h gsm_23_003.h gsm_23_041.h gsm_25_415.h gsm_29_118.h gsm_44_004.h gsm_44_060.h gsm_44_068.h gsm_44_318.h gsm_48_049.h gsm_48_071.h gsm_49_031.h ipaccess.h smpp34_osmocom.h '/build/inst-osmo-bts/include/osmocom/gsm/protocol'
make[7]: Leaving directory '/build/libosmocore/include/osmocom/gsm/protocol'
make[6]: Leaving directory '/build/libosmocore/include/osmocom/gsm/protocol'
make[6]: Entering directory '/build/libosmocore/include/osmocom/gsm'
make[7]: Entering directory '/build/libosmocore/include/osmocom/gsm'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/gsm'
/usr/bin/install -c -m 644 a5.h abis_nm.h apn.h bts_features.h cbsp.h comp128.h comp128v23.h bitvec_gsm.h gan.h gsm0341.h gsm0411_smc.h gsm0411_smr.h gsm0411_utils.h gsm0480.h gsm0502.h gsm0503.h bsslap.h bssmap_le.h gad.h gsm0808.h gsm0808_lcs.h gsm29205.h gsm0808_utils.h gsm23003.h gsm23236.h gsm29118.h gsm44021.h gsm48.h gsm48_arfcn_range_encode.h gsm48_ie.h gsm48_rest_octets.h gsm_utils.h gsup.h gsup_sms.h i460_mux.h ipa.h iuup.h lapd_core.h lapdm.h meas_rep.h '/build/inst-osmo-bts/include/osmocom/gsm'
/usr/bin/install -c -m 644 mncc.h prim.h l1sap.h oap.h oap_client.h rlp.h rsl.h rtp_extensions.h rxlev_stat.h sysinfo.h tlv.h '/build/inst-osmo-bts/include/osmocom/gsm'
make[7]: Leaving directory '/build/libosmocore/include/osmocom/gsm'
make[6]: Leaving directory '/build/libosmocore/include/osmocom/gsm'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/gsm'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/gsm'
Making install in isdn
make[4]: Entering directory '/build/libosmocore/include/osmocom/isdn'
make[5]: Entering directory '/build/libosmocore/include/osmocom/isdn'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/isdn'
/usr/bin/install -c -m 644 i460_mux.h lapd_core.h v110.h v110_ta.h '/build/inst-osmo-bts/include/osmocom/isdn'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/isdn'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/isdn'
Making install in crypt
make[4]: Entering directory '/build/libosmocore/include/osmocom/crypt'
make[5]: Entering directory '/build/libosmocore/include/osmocom/crypt'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/crypt'
/usr/bin/install -c -m 644 auth.h gprs_cipher.h kdf.h utran_cipher.h '/build/inst-osmo-bts/include/osmocom/crypt'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/crypt'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/crypt'
Making install in coding
make[4]: Entering directory '/build/libosmocore/include/osmocom/coding'
make[5]: Entering directory '/build/libosmocore/include/osmocom/coding'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/coding'
/usr/bin/install -c -m 644 gsm0503_tables.h gsm0503_parity.h gsm0503_mapping.h gsm0503_interleaving.h gsm0503_coding.h gsm0503_amr_dtx.h '/build/inst-osmo-bts/include/osmocom/coding'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/coding'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/coding'
Making install in gprs
make[4]: Entering directory '/build/libosmocore/include/osmocom/gprs'
Making install in protocol
make[5]: Entering directory '/build/libosmocore/include/osmocom/gprs/protocol'
make[6]: Entering directory '/build/libosmocore/include/osmocom/gprs/protocol'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/gprs/protocol'
/usr/bin/install -c -m 644 gsm_04_60.h gsm_08_16.h gsm_08_18.h gsm_24_301.h '/build/inst-osmo-bts/include/osmocom/gprs/protocol'
make[6]: Leaving directory '/build/libosmocore/include/osmocom/gprs/protocol'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/gprs/protocol'
make[5]: Entering directory '/build/libosmocore/include/osmocom/gprs'
make[6]: Entering directory '/build/libosmocore/include/osmocom/gprs'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/gprs'
/usr/bin/install -c -m 644 frame_relay.h bssgp_bvc_fsm.h gprs_bssgp.h gprs_bssgp2.h gprs_bssgp_bss.h gprs_bssgp_rim.h gprs_msgb.h gprs_ns.h gprs_ns_frgre.h gprs_ns2.h gprs_rlc.h '/build/inst-osmo-bts/include/osmocom/gprs'
make[6]: Leaving directory '/build/libosmocore/include/osmocom/gprs'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/gprs'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/gprs'
Making install in ctrl
make[4]: Entering directory '/build/libosmocore/include/osmocom/ctrl'
make[5]: Entering directory '/build/libosmocore/include/osmocom/ctrl'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/ctrl'
/usr/bin/install -c -m 644 control_cmd.h control_if.h ports.h control_vty.h '/build/inst-osmo-bts/include/osmocom/ctrl'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/ctrl'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/ctrl'
Making install in sim
make[4]: Entering directory '/build/libosmocore/include/osmocom/sim'
make[5]: Entering directory '/build/libosmocore/include/osmocom/sim'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/sim'
/usr/bin/install -c -m 644 class_tables.h sim.h '/build/inst-osmo-bts/include/osmocom/sim'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/sim'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/sim'
Making install in usb
make[4]: Entering directory '/build/libosmocore/include/osmocom/usb'
make[5]: Entering directory '/build/libosmocore/include/osmocom/usb'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/usb'
/usr/bin/install -c -m 644 libusb.h '/build/inst-osmo-bts/include/osmocom/usb'
make[5]: Leaving directory '/build/libosmocore/include/osmocom/usb'
make[4]: Leaving directory '/build/libosmocore/include/osmocom/usb'
make[4]: Entering directory '/build/libosmocore/include/osmocom'
make[5]: Entering directory '/build/libosmocore/include/osmocom'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libosmocore/include/osmocom'
make[4]: Leaving directory '/build/libosmocore/include/osmocom'
make[3]: Leaving directory '/build/libosmocore/include/osmocom'
make[3]: Entering directory '/build/libosmocore/include'
make[4]: Entering directory '/build/libosmocore/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/include'
make[3]: Leaving directory '/build/libosmocore/include'
make[2]: Leaving directory '/build/libosmocore/include'
Making install in src
make[2]: Entering directory '/build/libosmocore/src'
Making install in core
make[3]: Entering directory '/build/libosmocore/src/core'
make install-am
make[4]: Entering directory '/build/libosmocore/src/core'
make[5]: Entering directory '/build/libosmocore/src/core'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocore.la '/build/inst-osmo-bts/lib'
libtool: install: /usr/bin/install -c .libs/libosmocore.so.22.0.0 /build/inst-osmo-bts/lib/libosmocore.so.22.0.0
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmocore.so.22.0.0 libosmocore.so.22 || { rm -f libosmocore.so.22 && ln -s libosmocore.so.22.0.0 libosmocore.so.22; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmocore.so.22.0.0 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.22.0.0 libosmocore.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocore.lai /build/inst-osmo-bts/lib/libosmocore.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libosmocore/src/core'
make[4]: Leaving directory '/build/libosmocore/src/core'
make[3]: Leaving directory '/build/libosmocore/src/core'
Making install in vty
make[3]: Entering directory '/build/libosmocore/src/vty'
make[4]: Entering directory '/build/libosmocore/src/vty'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmovty.la'
libtool: install: (cd /build/libosmocore/src/vty; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -pthread -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -version-info 13:1:0 -no-undefined -o libosmovty.la -rpath /build/inst-osmo-bts/lib buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo cpu_sched_vty.lo tdef_vty.lo ../../src/core/libosmocore.la -ltalloc )
libtool: install: /usr/bin/install -c .libs/libosmovty.so.13.0.1T /build/inst-osmo-bts/lib/libosmovty.so.13.0.1
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmovty.so.13.0.1 libosmovty.so.13 || { rm -f libosmovty.so.13 && ln -s libosmovty.so.13.0.1 libosmovty.so.13; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmovty.so.13.0.1 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.13.0.1 libosmovty.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmovty.lai /build/inst-osmo-bts/lib/libosmovty.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src/vty'
make[3]: Leaving directory '/build/libosmocore/src/vty'
Making install in isdn
make[3]: Entering directory '/build/libosmocore/src/isdn'
make[4]: Entering directory '/build/libosmocore/src/isdn'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmoisdn.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmoisdn.la'
libtool: install: (cd /build/libosmocore/src/isdn; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmoisdn.map -version-info 2:0:2 -no-undefined -o libosmoisdn.la -rpath /build/inst-osmo-bts/lib libisdnint.la -ltalloc )
libtool: install: /usr/bin/install -c .libs/libosmoisdn.so.0.2.0T /build/inst-osmo-bts/lib/libosmoisdn.so.0.2.0
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmoisdn.so.0.2.0 libosmoisdn.so.0 || { rm -f libosmoisdn.so.0 && ln -s libosmoisdn.so.0.2.0 libosmoisdn.so.0; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmoisdn.so.0.2.0 libosmoisdn.so || { rm -f libosmoisdn.so && ln -s libosmoisdn.so.0.2.0 libosmoisdn.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoisdn.lai /build/inst-osmo-bts/lib/libosmoisdn.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src/isdn'
make[3]: Leaving directory '/build/libosmocore/src/isdn'
Making install in codec
make[3]: Entering directory '/build/libosmocore/src/codec'
make[4]: Entering directory '/build/libosmocore/src/codec'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmocodec.la'
libtool: install: (cd /build/libosmocore/src/codec; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -version-info 4:1:0 -no-undefined -o libosmocodec.la -rpath /build/inst-osmo-bts/lib gsm610.lo gsm620.lo gsm660.lo gsm690.lo hr_sid_class.lo ecu.lo ecu_fr.lo ecu_fr_old.lo ../../src/core/libosmocore.la )
libtool: install: /usr/bin/install -c .libs/libosmocodec.so.4.0.1T /build/inst-osmo-bts/lib/libosmocodec.so.4.0.1
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmocodec.so.4.0.1 libosmocodec.so.4 || { rm -f libosmocodec.so.4 && ln -s libosmocodec.so.4.0.1 libosmocodec.so.4; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmocodec.so.4.0.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.4.0.1 libosmocodec.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocodec.lai /build/inst-osmo-bts/lib/libosmocodec.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src/codec'
make[3]: Leaving directory '/build/libosmocore/src/codec'
Making install in gsm
make[3]: Entering directory '/build/libosmocore/src/gsm'
make install-am
make[4]: Entering directory '/build/libosmocore/src/gsm'
make[5]: Entering directory '/build/libosmocore/src/gsm'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogsm.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmogsm.la'
libtool: install: (cd /build/libosmocore/src/gsm; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -I/usr/include/p11-kit-1 -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogsm.map -version-info 21:0:1 -no-undefined -o libosmogsm.la -rpath /build/inst-osmo-bts/lib libgsmint.la -ltalloc -lgnutls )
libtool: install: /usr/bin/install -c .libs/libosmogsm.so.20.1.0T /build/inst-osmo-bts/lib/libosmogsm.so.20.1.0
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmogsm.so.20.1.0 libosmogsm.so.20 || { rm -f libosmogsm.so.20 && ln -s libosmogsm.so.20.1.0 libosmogsm.so.20; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmogsm.so.20.1.0 libosmogsm.so || { rm -f libosmogsm.so && ln -s libosmogsm.so.20.1.0 libosmogsm.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmogsm.lai /build/inst-osmo-bts/lib/libosmogsm.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libosmocore/src/gsm'
make[4]: Leaving directory '/build/libosmocore/src/gsm'
make[3]: Leaving directory '/build/libosmocore/src/gsm'
Making install in coding
make[3]: Entering directory '/build/libosmocore/src/coding'
make[4]: Entering directory '/build/libosmocore/src/coding'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocoding.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmocoding.la'
libtool: install: (cd /build/libosmocore/src/coding; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmocoding.map -version-info 3:1:3 -no-undefined -o libosmocoding.la -rpath /build/inst-osmo-bts/lib gsm0503_interleaving.lo gsm0503_mapping.lo gsm0503_tables.lo gsm0503_parity.lo gsm0503_coding.lo gsm0503_amr_dtx.lo ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/codec/libosmocodec.la )
libtool: install: /usr/bin/install -c .libs/libosmocoding.so.0.3.1T /build/inst-osmo-bts/lib/libosmocoding.so.0.3.1
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmocoding.so.0.3.1 libosmocoding.so.0 || { rm -f libosmocoding.so.0 && ln -s libosmocoding.so.0.3.1 libosmocoding.so.0; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmocoding.so.0.3.1 libosmocoding.so || { rm -f libosmocoding.so && ln -s libosmocoding.so.0.3.1 libosmocoding.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocoding.lai /build/inst-osmo-bts/lib/libosmocoding.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src/coding'
make[3]: Leaving directory '/build/libosmocore/src/coding'
Making install in gb
make[3]: Entering directory '/build/libosmocore/src/gb'
make[4]: Entering directory '/build/libosmocore/src/gb'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogb.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmogb.la'
libtool: install: (cd /build/libosmocore/src/gb; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -fno-strict-aliasing -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogb.map -version-info 16:1:2 -no-undefined -o libosmogb.la -rpath /build/inst-osmo-bts/lib gprs_ns.lo gprs_ns_frgre.lo gprs_ns_vty.lo gprs_ns_sns.lo gprs_bssgp.lo gprs_bssgp_util.lo gprs_bssgp_vty.lo gprs_bssgp_rim.lo gprs_bssgp_bss.lo gprs_ns2.lo gprs_ns2_udp.lo gprs_ns2_frgre.lo gprs_ns2_fr.lo gprs_ns2_vc_fsm.lo gprs_ns2_sns.lo gprs_ns2_message.lo gprs_ns2_vty.lo gprs_bssgp2.lo bssgp_bvc_fsm.lo common_vty.lo frame_relay.lo -ltalloc ../../src/core/libosmocore.la ../../src/vty/libosmovty.la ../../src/gsm/libosmogsm.la )
libtool: install: /usr/bin/install -c .libs/libosmogb.so.14.2.1T /build/inst-osmo-bts/lib/libosmogb.so.14.2.1
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmogb.so.14.2.1 libosmogb.so.14 || { rm -f libosmogb.so.14 && ln -s libosmogb.so.14.2.1 libosmogb.so.14; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmogb.so.14.2.1 libosmogb.so || { rm -f libosmogb.so && ln -s libosmogb.so.14.2.1 libosmogb.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmogb.lai /build/inst-osmo-bts/lib/libosmogb.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src/gb'
make[3]: Leaving directory '/build/libosmocore/src/gb'
Making install in ctrl
make[3]: Entering directory '/build/libosmocore/src/ctrl'
make[4]: Entering directory '/build/libosmocore/src/ctrl'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmoctrl.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmoctrl.la'
libtool: install: (cd /build/libosmocore/src/ctrl; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmoctrl.map -version-info 9:0:9 -no-undefined -o libosmoctrl.la -rpath /build/inst-osmo-bts/lib control_cmd.lo control_if.lo fsm_ctrl_commands.lo control_vty.lo -ltalloc ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/vty/libosmovty.la )
libtool: install: /usr/bin/install -c .libs/libosmoctrl.so.0.9.0T /build/inst-osmo-bts/lib/libosmoctrl.so.0.9.0
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmoctrl.so.0.9.0 libosmoctrl.so.0 || { rm -f libosmoctrl.so.0 && ln -s libosmoctrl.so.0.9.0 libosmoctrl.so.0; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmoctrl.so.0.9.0 libosmoctrl.so || { rm -f libosmoctrl.so && ln -s libosmoctrl.so.0.9.0 libosmoctrl.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoctrl.lai /build/inst-osmo-bts/lib/libosmoctrl.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src/ctrl'
make[3]: Leaving directory '/build/libosmocore/src/ctrl'
Making install in pseudotalloc
make[3]: Entering directory '/build/libosmocore/src/pseudotalloc'
make[4]: Entering directory '/build/libosmocore/src/pseudotalloc'
make[4]: Leaving directory '/build/libosmocore/src/pseudotalloc'
make[3]: Leaving directory '/build/libosmocore/src/pseudotalloc'
Making install in sim
make[3]: Entering directory '/build/libosmocore/src/sim'
make[4]: Entering directory '/build/libosmocore/src/sim'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmosim.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmosim.la'
libtool: install: (cd /build/libosmocore/src/sim; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/PCSC -pthread -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -version-info 3:3:1 -no-undefined -o libosmosim.la -rpath /build/inst-osmo-bts/lib core.lo reader.lo class_tables.lo card_fs_sim.lo card_fs_usim.lo card_fs_uicc.lo card_fs_isim.lo card_fs_hpsim.lo card_fs_tetra.lo reader_pcsc.lo ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la -ltalloc -lpcsclite )
libtool: install: /usr/bin/install -c .libs/libosmosim.so.2.1.3T /build/inst-osmo-bts/lib/libosmosim.so.2.1.3
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmosim.so.2.1.3 libosmosim.so.2 || { rm -f libosmosim.so.2 && ln -s libosmosim.so.2.1.3 libosmosim.so.2; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmosim.so.2.1.3 libosmosim.so || { rm -f libosmosim.so && ln -s libosmosim.so.2.1.3 libosmosim.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmosim.lai /build/inst-osmo-bts/lib/libosmosim.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src/sim'
make[3]: Leaving directory '/build/libosmocore/src/sim'
Making install in usb
make[3]: Entering directory '/build/libosmocore/src/usb'
make[4]: Entering directory '/build/libosmocore/src/usb'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmousb.la '/build/inst-osmo-bts/lib'
libtool: warning: relinking 'libosmousb.la'
libtool: install: (cd /build/libosmocore/src/usb; /bin/bash "/build/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/libusb-1.0 -std=gnu11 -fsanitize=address -fsanitize=undefined -DBUILDING_LIBOSMOCORE -Wall -version-info 0:1:0 -no-undefined -o libosmousb.la -rpath /build/inst-osmo-bts/lib osmo_libusb.lo ../../src/core/libosmocore.la -ltalloc -lusb-1.0 )
libtool: install: /usr/bin/install -c .libs/libosmousb.so.0.0.1T /build/inst-osmo-bts/lib/libosmousb.so.0.0.1
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so.0 || { rm -f libosmousb.so.0 && ln -s libosmousb.so.0.0.1 libosmousb.so.0; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so || { rm -f libosmousb.so && ln -s libosmousb.so.0.0.1 libosmousb.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmousb.lai /build/inst-osmo-bts/lib/libosmousb.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src/usb'
make[3]: Leaving directory '/build/libosmocore/src/usb'
make[3]: Entering directory '/build/libosmocore/src'
make[4]: Entering directory '/build/libosmocore/src'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/src'
make[3]: Leaving directory '/build/libosmocore/src'
make[2]: Leaving directory '/build/libosmocore/src'
Making install in utils
make[2]: Entering directory '/build/libosmocore/utils'
make[3]: Entering directory '/build/libosmocore/utils'
make[4]: Entering directory '/build/libosmocore/utils'
/usr/bin/mkdir -p '/build/inst-osmo-bts/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-arfcn osmo-auc-gen osmo-config-merge osmo-aka-verify osmo-gsmtap-logsend '/build/inst-osmo-bts/bin'
libtool: install: /usr/bin/install -c .libs/osmo-arfcn /build/inst-osmo-bts/bin/osmo-arfcn
libtool: install: /usr/bin/install -c .libs/osmo-auc-gen /build/inst-osmo-bts/bin/osmo-auc-gen
libtool: install: /usr/bin/install -c .libs/osmo-config-merge /build/inst-osmo-bts/bin/osmo-config-merge
libtool: install: /usr/bin/install -c .libs/osmo-aka-verify /build/inst-osmo-bts/bin/osmo-aka-verify
libtool: install: /usr/bin/install -c .libs/osmo-gsmtap-logsend /build/inst-osmo-bts/bin/osmo-gsmtap-logsend
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/utils'
make[3]: Leaving directory '/build/libosmocore/utils'
make[2]: Leaving directory '/build/libosmocore/utils'
Making install in tapset
make[2]: Entering directory '/build/libosmocore/tapset'
make[3]: Entering directory '/build/libosmocore/tapset'
make[3]: Nothing to be done for 'install-exec-am'.
make install-data-hook
make[4]: Entering directory '/build/libosmocore/tapset'
make[4]: Nothing to be done for 'install-data-hook'.
make[4]: Leaving directory '/build/libosmocore/tapset'
make[3]: Leaving directory '/build/libosmocore/tapset'
make[2]: Leaving directory '/build/libosmocore/tapset'
Making install in tests
make[2]: Entering directory '/build/libosmocore/tests'
make install-am
make[3]: Entering directory '/build/libosmocore/tests'
make[4]: Entering directory '/build/libosmocore/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmocore/tests'
make[3]: Leaving directory '/build/libosmocore/tests'
make[2]: Leaving directory '/build/libosmocore/tests'
make[2]: Entering directory '/build/libosmocore'
make[3]: Entering directory '/build/libosmocore'
/usr/bin/mkdir -p '/build/inst-osmo-bts/bin'
/usr/bin/install -c osmo-release.sh '/build/inst-osmo-bts/bin'
/usr/bin/mkdir -p '/build/inst-osmo-bts/share/aclocal'
/usr/bin/install -c -m 644 m4/osmo_ac_code_coverage.m4 m4/osmo_ax_code_coverage.m4 '/build/inst-osmo-bts/share/aclocal'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc libosmousb.pc libosmoisdn.pc '/build/inst-osmo-bts/lib/pkgconfig'
/usr/bin/mkdir -p '/build/inst-osmo-bts/include'
/usr/bin/install -c -m 644 osmo-release.mk '/build/inst-osmo-bts/include'
make install-data-hook
make[4]: Entering directory '/build/libosmocore'
make[4]: Nothing to be done for 'install-data-hook'.
make[4]: Leaving directory '/build/libosmocore'
make[3]: Leaving directory '/build/libosmocore'
make[2]: Leaving directory '/build/libosmocore'
make[1]: Leaving directory '/build/libosmocore'
+ build_repo libosmo-netif --enable-sanitize --disable-doxygen
+ dir=libosmo-netif
+ shift
+ build_repo_dir libosmo-netif ./ --enable-sanitize --disable-doxygen
+ dep=libosmo-netif
+ dir=./
+ branch=master
+ echo --enable-sanitize
+ grep ^-
+ [ -z --enable-sanitize ]
+ shift
+ shift
+ configure_opts=--enable-sanitize --disable-doxygen
+ set +x
+ have_repo libosmo-netif master
+ repo=libosmo-netif
+ branch=master
====================== libosmo-netif
+ echo OSMO_GSM_TESTER_BUILD_libosmo-netif
+ sed s/-/_/g
+ branch_override_var=OSMO_GSM_TESTER_BUILD_libosmo_netif
+ eval echo $OSMO_GSM_TESTER_BUILD_libosmo_netif
+ echo
+ branch_override=
+ [ -n ]
+ cd /build
+ [ -d libosmo-netif ]
+ cd libosmo-netif
+ git fetch
+ git rev-parse origin/master
e84ee0506b23cf6713663c030f7d51835c479253
+ branch=origin/master
+ git checkout -B build_branch origin/master
Reset branch 'build_branch'
branch 'build_branch' set up to track 'origin/master'.
Your branch is up to date with 'origin/master'.
+ rm -rf COPYING Doxyfile Doxyfile.in Makefile Makefile.am Makefile.in README.md TODO-RELEASE aclocal.m4 autom4te.cache compile config.guess config.h config.h.in config.log config.status config.sub configure configure.ac contrib debian depcomp examples git-version-gen include install-sh libosmo-netif.pc libosmo-netif.pc.in libtool ltmain.sh m4 missing src stamp-h1 tests utils
+ git reset --hard origin/master
HEAD is now at e84ee05 ipa: Add osmo_ipa_ka_fsm_inst APIs
+ git rev-parse HEAD
e84ee0506b23cf6713663c030f7d51835c479253
+ git rev-parse HEAD
+ echo e84ee0506b23cf6713663c030f7d51835c479253 libosmo-netif
+ git submodule update --init
+ cd /build
+ cd libosmo-netif/./
+ [ -f configure.ac ]
+ set +x
+ autoreconf -fi
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:25: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
configure.ac:25: You should run autoupdate.
m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from...
configure.ac:25: the top level
configure.ac:75: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:75: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:75: the top level
configure.ac:90: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:90: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:90: the top level
configure.ac:128: warning: AC_OUTPUT should be used without arguments.
configure.ac:128: You should run autoupdate.
configure.ac:22: installing './compile'
configure.ac:24: installing './config.guess'
configure.ac:24: installing './config.sub'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
examples/Makefile.am: installing './depcomp'
+ set +x
+ ./configure --prefix=/build/inst-osmo-bts --with-systemdsystemunitdir=no --enable-sanitize --disable-doxygen
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for execinfo.h... yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for syslog.h... yes
checking for ctype.h... yes
checking if gcc supports -fvisibility=hidden... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmocodec >= 1.10.0... yes
checking for netinet/sctp.h... yes
checking for osmo_sock_init2_multiaddr in -losmocore... yes
checking for library containing sctp_send... -lsctp
checking for pcap.h... yes
checking for doxygen... /usr/bin/doxygen
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmo-netif.pc
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/netif/Makefile
config.status: creating src/Makefile
config.status: creating examples/Makefile
config.status: creating utils/Makefile
config.status: creating tests/Makefile
config.status: creating Doxyfile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
+ set +x
+ make -j8
make all-recursive
make[1]: Entering directory '/build/libosmo-netif'
Making all in include
make[2]: Entering directory '/build/libosmo-netif/include'
Making all in osmocom
make[3]: Entering directory '/build/libosmo-netif/include/osmocom'
Making all in netif
make[4]: Entering directory '/build/libosmo-netif/include/osmocom/netif'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/build/libosmo-netif/include/osmocom/netif'
make[4]: Entering directory '/build/libosmo-netif/include/osmocom'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/build/libosmo-netif/include/osmocom'
make[3]: Leaving directory '/build/libosmo-netif/include/osmocom'
make[3]: Entering directory '/build/libosmo-netif/include'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/libosmo-netif/include'
make[2]: Leaving directory '/build/libosmo-netif/include'
Making all in src
make[2]: Entering directory '/build/libosmo-netif/src'
CC ipa.lo
CC amr.lo
CC datagram.lo
CC osmux.lo
CC ipa_keepalive.lo
CC jibuf.lo
CC ipa_unit.lo
CC osmux_input.lo
CC osmux_output.lo
CC prim.lo
CC rs232.lo
CC rtp.lo
CC stream_cli.lo
CC stream_srv.lo
CC stream.lo
CC sctp.lo
CCLD libosmonetif.la
make[2]: Leaving directory '/build/libosmo-netif/src'
Making all in examples
make[2]: Entering directory '/build/libosmo-netif/examples'
CC ipa-stream-client.o
CC ipa-stream-server.o
CC stream-server.o
CC stream-client.o
CC rs232-read.o
CC rs232-write.o
CC rtp-udp-test-client.o
CC rtp-udp-test-server.o
CC udp-test-client.o
CC udp-test-server.o
CC osmux-test-input.o
CC osmux-test-output.o
CCLD stream-client
CCLD ipa-stream-server
CCLD stream-server
CCLD rs232-read
CCLD rs232-write
CCLD rtp-udp-test-client
CCLD rtp-udp-test-server
CCLD udp-test-client
CCLD udp-test-server
CCLD osmux-test-input
CCLD osmux-test-output
CCLD ipa-stream-client
make[2]: Leaving directory '/build/libosmo-netif/examples'
Making all in utils
make[2]: Entering directory '/build/libosmo-netif/utils'
CC osmo-amr-inspect.o
CCLD osmo-amr-inspect
make[2]: Leaving directory '/build/libosmo-netif/utils'
Making all in tests
make[2]: Entering directory '/build/libosmo-netif/tests'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/libosmo-netif/tests'
make[2]: Entering directory '/build/libosmo-netif'
make[2]: Leaving directory '/build/libosmo-netif'
make[1]: Leaving directory '/build/libosmo-netif'
+ set +x
+ make install
make install-recursive
make[1]: Entering directory '/build/libosmo-netif'
Making install in include
make[2]: Entering directory '/build/libosmo-netif/include'
Making install in osmocom
make[3]: Entering directory '/build/libosmo-netif/include/osmocom'
Making install in netif
make[4]: Entering directory '/build/libosmo-netif/include/osmocom/netif'
make[5]: Entering directory '/build/libosmo-netif/include/osmocom/netif'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/netif'
/usr/bin/install -c -m 644 amr.h datagram.h jibuf.h osmux.h ipa.h ipa_unit.h prim.h rs232.h rtp.h stream.h sctp.h '/build/inst-osmo-bts/include/osmocom/netif'
make[5]: Leaving directory '/build/libosmo-netif/include/osmocom/netif'
make[4]: Leaving directory '/build/libosmo-netif/include/osmocom/netif'
make[4]: Entering directory '/build/libosmo-netif/include/osmocom'
make[5]: Entering directory '/build/libosmo-netif/include/osmocom'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/libosmo-netif/include/osmocom'
make[4]: Leaving directory '/build/libosmo-netif/include/osmocom'
make[3]: Leaving directory '/build/libosmo-netif/include/osmocom'
make[3]: Entering directory '/build/libosmo-netif/include'
make[4]: Entering directory '/build/libosmo-netif/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmo-netif/include'
make[3]: Leaving directory '/build/libosmo-netif/include'
make[2]: Leaving directory '/build/libosmo-netif/include'
Making install in src
make[2]: Entering directory '/build/libosmo-netif/src'
make[3]: Entering directory '/build/libosmo-netif/src'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmonetif.la '/build/inst-osmo-bts/lib'
libtool: install: /usr/bin/install -c .libs/libosmonetif.so.11.2.1 /build/inst-osmo-bts/lib/libosmonetif.so.11.2.1
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmonetif.so.11.2.1 libosmonetif.so.11 || { rm -f libosmonetif.so.11 && ln -s libosmonetif.so.11.2.1 libosmonetif.so.11; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmonetif.so.11.2.1 libosmonetif.so || { rm -f libosmonetif.so && ln -s libosmonetif.so.11.2.1 libosmonetif.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmonetif.lai /build/inst-osmo-bts/lib/libosmonetif.la
libtool: install: /usr/bin/install -c .libs/libosmonetif.a /build/inst-osmo-bts/lib/libosmonetif.a
libtool: install: chmod 644 /build/inst-osmo-bts/lib/libosmonetif.a
libtool: install: ranlib /build/inst-osmo-bts/lib/libosmonetif.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/libosmo-netif/src'
make[2]: Leaving directory '/build/libosmo-netif/src'
Making install in examples
make[2]: Entering directory '/build/libosmo-netif/examples'
make[3]: Entering directory '/build/libosmo-netif/examples'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/libosmo-netif/examples'
make[2]: Leaving directory '/build/libosmo-netif/examples'
Making install in utils
make[2]: Entering directory '/build/libosmo-netif/utils'
make[3]: Entering directory '/build/libosmo-netif/utils'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/libosmo-netif/utils'
make[2]: Leaving directory '/build/libosmo-netif/utils'
Making install in tests
make[2]: Entering directory '/build/libosmo-netif/tests'
make[3]: Entering directory '/build/libosmo-netif/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/libosmo-netif/tests'
make[2]: Leaving directory '/build/libosmo-netif/tests'
make[2]: Entering directory '/build/libosmo-netif'
make[3]: Entering directory '/build/libosmo-netif'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmo-netif.pc '/build/inst-osmo-bts/lib/pkgconfig'
make install-data-hook
make[4]: Entering directory '/build/libosmo-netif'
make[4]: Nothing to be done for 'install-data-hook'.
make[4]: Leaving directory '/build/libosmo-netif'
make[3]: Leaving directory '/build/libosmo-netif'
make[2]: Leaving directory '/build/libosmo-netif'
make[1]: Leaving directory '/build/libosmo-netif'
+ build_repo libosmo-abis --enable-sanitize --disable-dahdi
+ dir=libosmo-abis
+ shift
+ build_repo_dir libosmo-abis ./ --enable-sanitize --disable-dahdi
+ dep=libosmo-abis
+ dir=./
+ branch=master
+ echo --enable-sanitize
+ grep ^-
+ [ -z --enable-sanitize ]
+ shift
+ shift
+ configure_opts=--enable-sanitize --disable-dahdi
+ set +x
+ have_repo libosmo-abis master
+ repo=libosmo-abis
+ branch=master
====================== libosmo-abis
+ echo OSMO_GSM_TESTER_BUILD_libosmo-abis
+ sed s/-/_/g
+ branch_override_var=OSMO_GSM_TESTER_BUILD_libosmo_abis
+ eval echo $OSMO_GSM_TESTER_BUILD_libosmo_abis
+ echo
+ branch_override=
+ [ -n ]
+ cd /build
+ [ -d libosmo-abis ]
+ cd libosmo-abis
+ git fetch
+ git rev-parse origin/master
3093ecced50d24b5c16e0314723c9c09569874dc
+ branch=origin/master
+ git checkout -B build_branch origin/master
Reset branch 'build_branch'
branch 'build_branch' set up to track 'origin/master'.
Your branch is up to date with 'origin/master'.
+ rm -rf AUTHORS COPYING Makefile Makefile.am Makefile.in README.md TODO-RELEASE aclocal.m4 autom4te.cache compile config.guess config.h config.h.in config.log config.status config.sub configure configure.ac contrib debian depcomp doc git-version-gen include install-sh libosmoabis.pc libosmoabis.pc.in libosmotrau.pc libosmotrau.pc.in libtool ltmain.sh m4 missing src stamp-h1 tests
+ git reset --hard origin/master
HEAD is now at 3093ecc ipaccess: Log ip_addr+port of srv_link failing to start
+ git rev-parse HEAD
3093ecced50d24b5c16e0314723c9c09569874dc
+ git rev-parse HEAD
+ echo 3093ecced50d24b5c16e0314723c9c09569874dc libosmo-abis
+ git submodule update --init
+ cd /build
+ cd libosmo-abis/./
+ [ -f configure.ac ]
+ set +x
+ autoreconf -fi
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:67: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:67: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:67: the top level
configure.ac:91: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:91: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:91: the top level
configure.ac:200: warning: AC_OUTPUT should be used without arguments.
configure.ac:200: You should run autoupdate.
configure.ac:22: installing './compile'
configure.ac:24: installing './config.guess'
configure.ac:24: installing './config.sub'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
doc/examples/Makefile.am: installing './depcomp'
+ set +x
+ ./configure --prefix=/build/inst-osmo-bts --with-systemdsystemunitdir=no --enable-sanitize --disable-dahdi
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking if gcc supports -fvisibility=hidden... yes
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmocodec >= 1.10.0... yes
checking for libosmo-netif >= 1.5.0... yes
checking for ortp >= 0.22.0... yes
configure: WARNING: DAHDI input driver will not be built
CFLAGS=" -std=gnu11 -Wall -fsanitize=address -fsanitize=undefined -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -Wall -fsanitize=address -fsanitize=undefined -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmoabis.pc
config.status: creating libosmotrau.pc
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
+ set +x
+ make -j8
make all-recursive
make[1]: Entering directory '/build/libosmo-abis'
Making all in include
make[2]: Entering directory '/build/libosmo-abis/include'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/libosmo-abis/include'
Making all in src
make[2]: Entering directory '/build/libosmo-abis/src'
CC init.lo
CC subchan_demux.lo
CC e1_input_vty.lo
CC e1_input.lo
CC trau_frame.lo
CC input/e1d.lo
CC input/ipa.lo
CC input/ipa_keepalive.lo
CC input/ipaccess.lo
CC input/lapd.lo
CC input/lapd_pcap.lo
CC input/misdn.lo
CC input/rs232.lo
CC input/unixsocket.lo
CC trau/libosmotrau_la-csd_ra2.lo
CC trau/libosmotrau_la-raa_prime_decode.lo
CC trau/libosmotrau_la-raa_prime_encode.lo
CC trau/libosmotrau_la-trau_frame.lo
CC trau/libosmotrau_la-trau_pcu_ericsson.lo
CC trau/libosmotrau_la-trau_sync.lo
CC trau/libosmotrau_la-trau_rtp_conv.lo
CC trau/libosmotrau_la-osmo_ortp.lo
trau/osmo_ortp.c:235:9: note: '#pragma message: Using internal ortp API: rtp_session_rtcp_rec'
235 | #pragma message ("Using internal ortp API: rtp_session_rtcp_rec")
| ^~~~~~~
CCLD libosmoabis.la
CCLD libosmotrau.la
make[2]: Leaving directory '/build/libosmo-abis/src'
Making all in tests
make[2]: Entering directory '/build/libosmo-abis/tests'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/libosmo-abis/tests'
Making all in doc
make[2]: Entering directory '/build/libosmo-abis/doc'
Making all in examples
make[3]: Entering directory '/build/libosmo-abis/doc/examples'
CC lapd-over-datagram/lapd-over-datagram-network.o
CC lapd-over-datagram/lapd-over-datagram-user.o
lapd-over-datagram/lapd-over-datagram-network.c: In function ‘main’:
lapd-over-datagram/lapd-over-datagram-network.c:154:9: warning: ‘lapd_instance_alloc’ is deprecated: Use lapd_instance_alloc2() instead [-Wdeprecated-declarations]
154 | lapd = lapd_instance_alloc(1, lapd_tx_cb, conn, lapd_rx_cb, conn,
| ^~~~
In file included from lapd-over-datagram/lapd-over-datagram-network.c:13:
../../include/osmocom/abis/lapd.h:63:23: note: declared here
63 | struct lapd_instance *lapd_instance_alloc(int network_side,
| ^~~~~~~~~~~~~~~~~~~
lapd-over-datagram/lapd-over-datagram-user.c: In function ‘main’:
lapd-over-datagram/lapd-over-datagram-user.c:204:9: warning: ‘lapd_instance_alloc’ is deprecated: Use lapd_instance_alloc2() instead [-Wdeprecated-declarations]
204 | lapd = lapd_instance_alloc(0, lapd_tx_cb, NULL, lapd_rx_cb, &num_msgs,
| ^~~~
In file included from lapd-over-datagram/lapd-over-datagram-user.c:16:
../../include/osmocom/abis/lapd.h:63:23: note: declared here
63 | struct lapd_instance *lapd_instance_alloc(int network_side,
| ^~~~~~~~~~~~~~~~~~~
CCLD lapd-over-datagram-network
CCLD lapd-over-datagram-user
make[3]: Leaving directory '/build/libosmo-abis/doc/examples'
make[3]: Entering directory '/build/libosmo-abis/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/libosmo-abis/doc'
make[2]: Leaving directory '/build/libosmo-abis/doc'
make[2]: Entering directory '/build/libosmo-abis'
make[2]: Leaving directory '/build/libosmo-abis'
make[1]: Leaving directory '/build/libosmo-abis'
+ set +x
+ make install
make install-recursive
make[1]: Entering directory '/build/libosmo-abis'
Making install in include
make[2]: Entering directory '/build/libosmo-abis/include'
make[3]: Entering directory '/build/libosmo-abis/include'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/include'
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/abis'
/usr/bin/install -c -m 644 osmocom/abis/ipa.h osmocom/abis/trau_frame.h osmocom/abis/ipaccess.h osmocom/abis/abis.h osmocom/abis/subchan_demux.h osmocom/abis/e1_input.h osmocom/abis/lapd.h osmocom/abis/lapd_pcap.h osmocom/abis/unixsocket_proto.h '/build/inst-osmo-bts/include/osmocom/abis'
/usr/bin/mkdir -p '/build/inst-osmo-bts/include/osmocom/trau'
/usr/bin/install -c -m 644 osmocom/trau/csd_ra2.h osmocom/trau/csd_raa_prime.h osmocom/trau/trau_frame.h osmocom/trau/trau_sync.h osmocom/trau/trau_pcu_ericsson.h osmocom/trau/trau_rtp.h osmocom/trau/osmo_ortp.h '/build/inst-osmo-bts/include/osmocom/trau'
make[3]: Leaving directory '/build/libosmo-abis/include'
make[2]: Leaving directory '/build/libosmo-abis/include'
Making install in src
make[2]: Entering directory '/build/libosmo-abis/src'
make[3]: Entering directory '/build/libosmo-abis/src'
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmoabis.la libosmotrau.la '/build/inst-osmo-bts/lib'
libtool: install: /usr/bin/install -c .libs/libosmoabis.so.13.1.0 /build/inst-osmo-bts/lib/libosmoabis.so.13.1.0
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmoabis.so.13.1.0 libosmoabis.so.13 || { rm -f libosmoabis.so.13 && ln -s libosmoabis.so.13.1.0 libosmoabis.so.13; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmoabis.so.13.1.0 libosmoabis.so || { rm -f libosmoabis.so && ln -s libosmoabis.so.13.1.0 libosmoabis.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoabis.lai /build/inst-osmo-bts/lib/libosmoabis.la
libtool: install: /usr/bin/install -c .libs/libosmotrau.so.10.0.0 /build/inst-osmo-bts/lib/libosmotrau.so.10.0.0
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmotrau.so.10.0.0 libosmotrau.so.10 || { rm -f libosmotrau.so.10 && ln -s libosmotrau.so.10.0.0 libosmotrau.so.10; }; })
libtool: install: (cd /build/inst-osmo-bts/lib && { ln -s -f libosmotrau.so.10.0.0 libosmotrau.so || { rm -f libosmotrau.so && ln -s libosmotrau.so.10.0.0 libosmotrau.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmotrau.lai /build/inst-osmo-bts/lib/libosmotrau.la
libtool: install: /usr/bin/install -c .libs/libosmoabis.a /build/inst-osmo-bts/lib/libosmoabis.a
libtool: install: chmod 644 /build/inst-osmo-bts/lib/libosmoabis.a
libtool: install: ranlib /build/inst-osmo-bts/lib/libosmoabis.a
libtool: install: /usr/bin/install -c .libs/libosmotrau.a /build/inst-osmo-bts/lib/libosmotrau.a
libtool: install: chmod 644 /build/inst-osmo-bts/lib/libosmotrau.a
libtool: install: ranlib /build/inst-osmo-bts/lib/libosmotrau.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/inst-osmo-bts/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/inst-osmo-bts/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/libosmo-abis/src'
make[2]: Leaving directory '/build/libosmo-abis/src'
Making install in tests
make[2]: Entering directory '/build/libosmo-abis/tests'
make[3]: Entering directory '/build/libosmo-abis/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/libosmo-abis/tests'
make[2]: Leaving directory '/build/libosmo-abis/tests'
Making install in doc
make[2]: Entering directory '/build/libosmo-abis/doc'
Making install in examples
make[3]: Entering directory '/build/libosmo-abis/doc/examples'
make[4]: Entering directory '/build/libosmo-abis/doc/examples'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmo-abis/doc/examples'
make[3]: Leaving directory '/build/libosmo-abis/doc/examples'
make[3]: Entering directory '/build/libosmo-abis/doc'
make[4]: Entering directory '/build/libosmo-abis/doc'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/libosmo-abis/doc'
make[3]: Leaving directory '/build/libosmo-abis/doc'
make[2]: Leaving directory '/build/libosmo-abis/doc'
make[2]: Entering directory '/build/libosmo-abis'
make[3]: Entering directory '/build/libosmo-abis'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmoabis.pc libosmotrau.pc '/build/inst-osmo-bts/lib/pkgconfig'
make[3]: Leaving directory '/build/libosmo-abis'
make[2]: Leaving directory '/build/libosmo-abis'
make[1]: Leaving directory '/build/libosmo-abis'
+ build_repo osmo-bts --enable-sanitize --enable-trx --with-openbsc=/build/openbsc/openbsc/include --enable-octphy --with-octsdr-2g=/build/octphy-2g-headers
+ dir=osmo-bts
+ shift
+ build_repo_dir osmo-bts ./ --enable-sanitize --enable-trx --with-openbsc=/build/openbsc/openbsc/include --enable-octphy --with-octsdr-2g=/build/octphy-2g-headers
+ dep=osmo-bts
+ dir=./
+ branch=master
+ echo --enable-sanitize
+ grep ^-
+ [ -z --enable-sanitize ]
+ shift
+ shift
+ configure_opts=--enable-sanitize --enable-trx --with-openbsc=/build/openbsc/openbsc/include --enable-octphy --with-octsdr-2g=/build/octphy-2g-headers
+ set +x
+ have_repo osmo-bts master
+ repo=osmo-bts
+ branch=master
====================== osmo-bts
+ echo OSMO_GSM_TESTER_BUILD_osmo-bts
+ sed s/-/_/g
+ branch_override_var=OSMO_GSM_TESTER_BUILD_osmo_bts
+ eval echo $OSMO_GSM_TESTER_BUILD_osmo_bts
+ echo
+ branch_override=
+ [ -n ]
+ cd /build
+ [ -d osmo-bts ]
+ cd osmo-bts
+ git fetch
+ git rev-parse origin/master
b032208a4a4e14ed789467a3c51fcaebd0e09c1e
+ branch=origin/master
+ git checkout -B build_branch origin/master
Reset branch 'build_branch'
branch 'build_branch' set up to track 'origin/master'.
Your branch is up to date with 'origin/master'.
+ rm -rf COPYING Makefile Makefile.am Makefile.in README.md TODO-RELEASE aclocal.m4 autom4te.cache btsconfig.h btsconfig.h.in compile config.guess config.log config.status config.sub configure configure.ac contrib debian depcomp doc git-version-gen include install-sh libtool ltmain.sh missing src stamp-h1 tests
+ git reset --hard origin/master
HEAD is now at b032208a pcu_sock: do not receive a TXT ind. with PCU_VERSION for a specific BTS
+ git rev-parse HEAD
b032208a4a4e14ed789467a3c51fcaebd0e09c1e
+ git rev-parse HEAD
+ echo b032208a4a4e14ed789467a3c51fcaebd0e09c1e osmo-bts
+ git submodule update --init
+ cd /build
+ cd osmo-bts/./
+ [ -f configure.ac ]
+ set +x
+ autoreconf -fi
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
configure.ac:40: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:40: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:40: the top level
configure.ac:84: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:84: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:84: the top level
configure.ac:92: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:92: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:92: the top level
configure.ac:124: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:124: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:124: the top level
configure.ac:132: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:132: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:132: the top level
configure.ac:272: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:272: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:272: the top level
configure.ac:292: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:292: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:292: the top level
configure.ac:354: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:354: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:354: the top level
configure.ac:422: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:422: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:10177: AM_CONFIG_HEADER is expanded from...
configure.ac:422: the top level
configure.ac:424: warning: AC_OUTPUT should be used without arguments.
configure.ac:424: You should run autoupdate.
configure.ac:23: installing './compile'
configure.ac:25: installing './config.guess'
configure.ac:25: installing './config.sub'
configure.ac:9: installing './install-sh'
configure.ac:9: installing './missing'
contrib/ber/Makefile.am: installing './depcomp'
src/common/Makefile.am:87: warning: variable 'libbts_la_LDADD' is defined but no program or
src/common/Makefile.am:87: library has 'libbts_la' as canonical name (possible typo)
src/osmo-bts-sysmo/Makefile.am:44: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:44: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least one source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However, this
automake: behavior may change in a future Automake major version, with object
automake: files being placed in the same subdirectory as the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:73: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:73: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:73: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:73: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:92: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:92: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:92: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:92: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:26: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:26: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:26: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:26: but option 'subdir-objects' is disabled
tests/handover/Makefile.am:24: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/handover/Makefile.am:24: but option 'subdir-objects' is disabled
tests/meas/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/meas/Makefile.am:25: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:24: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:24: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:26: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:26: but option 'subdir-objects' is disabled
tests/power/Makefile.am:28: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:28: but option 'subdir-objects' is disabled
tests/power/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:25: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:31: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:31: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:23: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:23: but option 'subdir-objects' is disabled
+ set +x
+ ./configure --prefix=/build/inst-osmo-bts --with-systemdsystemunitdir=no --enable-sanitize --enable-trx --with-openbsc=/build/openbsc/openbsc/include --enable-octphy --with-octsdr-2g=/build/octphy-2g-headers
configure: WARNING: unrecognized options: --with-openbsc
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for libosmocore >= 1.10.0... yes
checking for libosmovty >= 1.10.0... yes
checking for libosmogsm >= 1.10.0... yes
checking for libosmoctrl >= 1.10.0... yes
checking for libosmocodec >= 1.10.0... yes
checking for libosmocoding >= 1.10.0... yes
checking for libosmoabis >= 1.6.0... yes
checking for libosmotrau >= 1.6.0... yes
checking for libosmo-netif >= 1.5.0... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... yes
checking whether to enable support for Octasic OCTPHY-2G... yes
checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes
checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes
checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes
checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes
checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes
checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes
checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
checking whether to enable VTY/CTRL tests... no
checking whether to include systemtap tracing support... no
CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-lc15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/ta_control/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating tests/amr/Makefile
config.status: creating tests/csd/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/ber/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --with-openbsc
+ set +x
+ make -j8
make all-recursive
make[1]: Entering directory '/build/osmo-bts'
Making all in include
make[2]: Entering directory '/build/osmo-bts/include'
Making all in osmo-bts
make[3]: Entering directory '/build/osmo-bts/include/osmo-bts'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts/include'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-bts/include'
make[2]: Leaving directory '/build/osmo-bts/include'
Making all in src
make[2]: Entering directory '/build/osmo-bts/src'
Making all in common
make[3]: Entering directory '/build/osmo-bts/src/common'
make all-am
make[4]: Entering directory '/build/osmo-bts/src/common'
CC gsm_data.o
CC sysinfo.o
CC logging.o
CC abis.o
CC abis_osmo.o
CC oml.o
CC osmux.o
CC bts.o
CC bts_sm.o
CC bts_trx.o
CC rsl.o
CC rtp_input_preen.o
CC vty.o
CC paging.o
CC measurement.o
CC amr.o
CC asci.o
CC lchan.o
CC load_indication.o
CC pcu_sock.o
CC handover.o
CC msg_utils.o
CC tx_power.o
CC bts_ctrl_commands.o
CC bts_ctrl_lookup.o
CC bts_shutdown_fsm.o
CC csd_rlp.o
CC csd_v110.o
CC l1sap.o
CC cbch.o
CC power_control.o
CC main.o
CC phy_link.o
CC dtx_dl_amr_fsm.o
CC scheduler_mframe.o
CC ta_control.o
CC nm_common_fsm.o
CC nm_bts_sm_fsm.o
CC nm_bts_fsm.o
CC nm_bb_transc_fsm.o
CC nm_channel_fsm.o
CC nm_gprs_cell_fsm.o
CC nm_gprs_nse_fsm.o
CC nm_gprs_nsvc_fsm.o
CC nm_radio_carrier_fsm.o
CC notification.o
CC scheduler.o
AR libbts.a
ar: `u' modifier ignored since `D' is the default (see `U')
AR libl1sched.a
ar: `u' modifier ignored since `D' is the default (see `U')
make[4]: Leaving directory '/build/osmo-bts/src/common'
make[3]: Leaving directory '/build/osmo-bts/src/common'
Making all in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts/src/osmo-bts-virtual'
CC main.o
CC bts_model.o
CC scheduler_virtbts.o
CC virtualbts_vty.o
CC l1_if.o
CC virtual_um.o
CC osmo_mcast_sock.o
CCLD osmo-bts-virtual
make[3]: Leaving directory '/build/osmo-bts/src/osmo-bts-virtual'
Making all in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts/src/osmo-bts-omldummy'
CC main.o
CC bts_model.o
CCLD osmo-bts-omldummy
make[3]: Leaving directory '/build/osmo-bts/src/osmo-bts-omldummy'
Making all in osmo-bts-trx
make[3]: Entering directory '/build/osmo-bts/src/osmo-bts-trx'
make all-am
make[4]: Entering directory '/build/osmo-bts/src/osmo-bts-trx'
CC main.o
CC trx_if.o
CC sched_lchan_fcch_sch.o
CC l1_if.o
CC scheduler_trx.o
CC sched_lchan_rach.o
CC sched_lchan_xcch.o
CC sched_lchan_pdtch.o
CC sched_lchan_tchf.o
CC sched_lchan_tchh.o
CC trx_provision_fsm.o
CC trx_vty.o
CC amr_loop.o
CCLD osmo-bts-trx
make[4]: Leaving directory '/build/osmo-bts/src/osmo-bts-trx'
make[3]: Leaving directory '/build/osmo-bts/src/osmo-bts-trx'
Making all in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts/src/osmo-bts-octphy'
CC main.o
CC l1_if.o
CC l1_oml.o
CC l1_utils.o
CC octphy_vty.o
CC l1_tch.o
CC octphy_hw_api.o
CC octpkt.o
l1_oml.c: In function ‘bts_model_change_power’:
l1_oml.c:1793:9: note: ‘#pragma message: Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016)’
1793 | #pragma message ("Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016)")
| ^~~~~~~
l1_if.c: In function ‘mph_info_req’:
l1_if.c:660:9: note: ‘#pragma message: Mode Modify is currently not supported for Octasic PHY (OS#3015)’
660 | #pragma message ("Mode Modify is currently not supported for Octasic PHY (OS#3015)")
| ^~~~~~~
CCLD osmo-bts-octphy
make[3]: Leaving directory '/build/osmo-bts/src/osmo-bts-octphy'
make[3]: Entering directory '/build/osmo-bts/src'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-bts/src'
make[2]: Leaving directory '/build/osmo-bts/src'
Making all in tests
make[2]: Entering directory '/build/osmo-bts/tests'
Making all in paging
make[3]: Entering directory '/build/osmo-bts/tests/paging'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/paging'
Making all in cipher
make[3]: Entering directory '/build/osmo-bts/tests/cipher'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/cipher'
Making all in agch
make[3]: Entering directory '/build/osmo-bts/tests/agch'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/agch'
Making all in misc
make[3]: Entering directory '/build/osmo-bts/tests/misc'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/misc'
Making all in handover
make[3]: Entering directory '/build/osmo-bts/tests/handover'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/handover'
Making all in tx_power
make[3]: Entering directory '/build/osmo-bts/tests/tx_power'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/tx_power'
Making all in power
make[3]: Entering directory '/build/osmo-bts/tests/power'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/power'
Making all in meas
make[3]: Entering directory '/build/osmo-bts/tests/meas'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/meas'
Making all in ta_control
make[3]: Entering directory '/build/osmo-bts/tests/ta_control'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/ta_control'
Making all in amr
make[3]: Entering directory '/build/osmo-bts/tests/amr'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/amr'
Making all in csd
make[3]: Entering directory '/build/osmo-bts/tests/csd'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/tests/csd'
make[3]: Entering directory '/build/osmo-bts/tests'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-bts/tests'
make[2]: Leaving directory '/build/osmo-bts/tests'
Making all in doc
make[2]: Entering directory '/build/osmo-bts/doc'
Making all in examples
make[3]: Entering directory '/build/osmo-bts/doc/examples'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/doc/examples'
Making all in manuals
make[3]: Entering directory '/build/osmo-bts/doc/manuals'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/doc/manuals'
make[3]: Entering directory '/build/osmo-bts/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-bts/doc'
make[2]: Leaving directory '/build/osmo-bts/doc'
Making all in contrib
make[2]: Entering directory '/build/osmo-bts/contrib'
Making all in systemd
make[3]: Entering directory '/build/osmo-bts/contrib/systemd'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/osmo-bts/contrib/systemd'
Making all in ber
make[3]: Entering directory '/build/osmo-bts/contrib/ber'
CC rtp_ber.o
CC rtp_gen_map.o
CCLD rtp_gen_map
CCLD rtp_ber
make[3]: Leaving directory '/build/osmo-bts/contrib/ber'
make[3]: Entering directory '/build/osmo-bts/contrib'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/osmo-bts/contrib'
make[2]: Leaving directory '/build/osmo-bts/contrib'
make[2]: Entering directory '/build/osmo-bts'
make[2]: Leaving directory '/build/osmo-bts'
make[1]: Leaving directory '/build/osmo-bts'
+ set +x
+ make install
make install-recursive
make[1]: Entering directory '/build/osmo-bts'
Making install in include
make[2]: Entering directory '/build/osmo-bts/include'
Making install in osmo-bts
make[3]: Entering directory '/build/osmo-bts/include/osmo-bts'
make[4]: Entering directory '/build/osmo-bts/include/osmo-bts'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/include/osmo-bts'
make[3]: Leaving directory '/build/osmo-bts/include/osmo-bts'
make[3]: Entering directory '/build/osmo-bts/include'
make[4]: Entering directory '/build/osmo-bts/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/include'
make[3]: Leaving directory '/build/osmo-bts/include'
make[2]: Leaving directory '/build/osmo-bts/include'
Making install in src
make[2]: Entering directory '/build/osmo-bts/src'
Making install in common
make[3]: Entering directory '/build/osmo-bts/src/common'
make install-am
make[4]: Entering directory '/build/osmo-bts/src/common'
make[5]: Entering directory '/build/osmo-bts/src/common'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts/src/common'
make[4]: Leaving directory '/build/osmo-bts/src/common'
make[3]: Leaving directory '/build/osmo-bts/src/common'
Making install in osmo-bts-virtual
make[3]: Entering directory '/build/osmo-bts/src/osmo-bts-virtual'
make[4]: Entering directory '/build/osmo-bts/src/osmo-bts-virtual'
/usr/bin/mkdir -p '/build/inst-osmo-bts/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-virtual '/build/inst-osmo-bts/bin'
libtool: install: /usr/bin/install -c osmo-bts-virtual /build/inst-osmo-bts/bin/osmo-bts-virtual
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/src/osmo-bts-virtual'
make[3]: Leaving directory '/build/osmo-bts/src/osmo-bts-virtual'
Making install in osmo-bts-omldummy
make[3]: Entering directory '/build/osmo-bts/src/osmo-bts-omldummy'
make[4]: Entering directory '/build/osmo-bts/src/osmo-bts-omldummy'
/usr/bin/mkdir -p '/build/inst-osmo-bts/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-omldummy '/build/inst-osmo-bts/bin'
libtool: install: /usr/bin/install -c osmo-bts-omldummy /build/inst-osmo-bts/bin/osmo-bts-omldummy
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/src/osmo-bts-omldummy'
make[3]: Leaving directory '/build/osmo-bts/src/osmo-bts-omldummy'
Making install in osmo-bts-trx
make[3]: Entering directory '/build/osmo-bts/src/osmo-bts-trx'
make install-am
make[4]: Entering directory '/build/osmo-bts/src/osmo-bts-trx'
make[5]: Entering directory '/build/osmo-bts/src/osmo-bts-trx'
/usr/bin/mkdir -p '/build/inst-osmo-bts/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-trx '/build/inst-osmo-bts/bin'
libtool: install: /usr/bin/install -c osmo-bts-trx /build/inst-osmo-bts/bin/osmo-bts-trx
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/osmo-bts/src/osmo-bts-trx'
make[4]: Leaving directory '/build/osmo-bts/src/osmo-bts-trx'
make[3]: Leaving directory '/build/osmo-bts/src/osmo-bts-trx'
Making install in osmo-bts-octphy
make[3]: Entering directory '/build/osmo-bts/src/osmo-bts-octphy'
make[4]: Entering directory '/build/osmo-bts/src/osmo-bts-octphy'
/usr/bin/mkdir -p '/build/inst-osmo-bts/bin'
/bin/bash ../../libtool --mode=install /usr/bin/install -c osmo-bts-octphy '/build/inst-osmo-bts/bin'
libtool: install: /usr/bin/install -c osmo-bts-octphy /build/inst-osmo-bts/bin/osmo-bts-octphy
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/src/osmo-bts-octphy'
make[3]: Leaving directory '/build/osmo-bts/src/osmo-bts-octphy'
make[3]: Entering directory '/build/osmo-bts/src'
make[4]: Entering directory '/build/osmo-bts/src'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/src'
make[3]: Leaving directory '/build/osmo-bts/src'
make[2]: Leaving directory '/build/osmo-bts/src'
Making install in tests
make[2]: Entering directory '/build/osmo-bts/tests'
Making install in paging
make[3]: Entering directory '/build/osmo-bts/tests/paging'
make[4]: Entering directory '/build/osmo-bts/tests/paging'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/paging'
make[3]: Leaving directory '/build/osmo-bts/tests/paging'
Making install in cipher
make[3]: Entering directory '/build/osmo-bts/tests/cipher'
make[4]: Entering directory '/build/osmo-bts/tests/cipher'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/cipher'
make[3]: Leaving directory '/build/osmo-bts/tests/cipher'
Making install in agch
make[3]: Entering directory '/build/osmo-bts/tests/agch'
make[4]: Entering directory '/build/osmo-bts/tests/agch'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/agch'
make[3]: Leaving directory '/build/osmo-bts/tests/agch'
Making install in misc
make[3]: Entering directory '/build/osmo-bts/tests/misc'
make[4]: Entering directory '/build/osmo-bts/tests/misc'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/misc'
make[3]: Leaving directory '/build/osmo-bts/tests/misc'
Making install in handover
make[3]: Entering directory '/build/osmo-bts/tests/handover'
make[4]: Entering directory '/build/osmo-bts/tests/handover'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/handover'
make[3]: Leaving directory '/build/osmo-bts/tests/handover'
Making install in tx_power
make[3]: Entering directory '/build/osmo-bts/tests/tx_power'
make[4]: Entering directory '/build/osmo-bts/tests/tx_power'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/tx_power'
make[3]: Leaving directory '/build/osmo-bts/tests/tx_power'
Making install in power
make[3]: Entering directory '/build/osmo-bts/tests/power'
make[4]: Entering directory '/build/osmo-bts/tests/power'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/power'
make[3]: Leaving directory '/build/osmo-bts/tests/power'
Making install in meas
make[3]: Entering directory '/build/osmo-bts/tests/meas'
make[4]: Entering directory '/build/osmo-bts/tests/meas'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/meas'
make[3]: Leaving directory '/build/osmo-bts/tests/meas'
Making install in ta_control
make[3]: Entering directory '/build/osmo-bts/tests/ta_control'
make[4]: Entering directory '/build/osmo-bts/tests/ta_control'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/ta_control'
make[3]: Leaving directory '/build/osmo-bts/tests/ta_control'
Making install in amr
make[3]: Entering directory '/build/osmo-bts/tests/amr'
make[4]: Entering directory '/build/osmo-bts/tests/amr'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/amr'
make[3]: Leaving directory '/build/osmo-bts/tests/amr'
Making install in csd
make[3]: Entering directory '/build/osmo-bts/tests/csd'
make[4]: Entering directory '/build/osmo-bts/tests/csd'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests/csd'
make[3]: Leaving directory '/build/osmo-bts/tests/csd'
make[3]: Entering directory '/build/osmo-bts/tests'
make[4]: Entering directory '/build/osmo-bts/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/tests'
make[3]: Leaving directory '/build/osmo-bts/tests'
make[2]: Leaving directory '/build/osmo-bts/tests'
Making install in doc
make[2]: Entering directory '/build/osmo-bts/doc'
Making install in examples
make[3]: Entering directory '/build/osmo-bts/doc/examples'
make[4]: Entering directory '/build/osmo-bts/doc/examples'
make[4]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/inst-osmo-bts/share/doc/osmo-bts/examples/osmo-bts-octphy'
/usr/bin/install -c -m 644 octphy/osmo-bts-trx2dsp1.cfg octphy/osmo-bts-octphy.cfg '/build/inst-osmo-bts/share/doc/osmo-bts/examples/osmo-bts-octphy'
/usr/bin/mkdir -p '/build/inst-osmo-bts/share/doc/osmo-bts/examples/osmo-bts-trx'
/usr/bin/install -c -m 644 trx/osmo-bts-trx.cfg trx/osmo-bts-trx-calypso.cfg '/build/inst-osmo-bts/share/doc/osmo-bts/examples/osmo-bts-trx'
/usr/bin/mkdir -p '/build/inst-osmo-bts/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/install -c -m 644 virtual/osmo-bts-virtual.cfg '/build/inst-osmo-bts/share/doc/osmo-bts/examples/osmo-bts-virtual'
/usr/bin/mkdir -p '/build/inst-osmo-bts/etc/osmocom'
/usr/bin/install -c -m 644 virtual/osmo-bts-virtual.cfg trx/osmo-bts-trx.cfg octphy/osmo-bts-octphy.cfg '/build/inst-osmo-bts/etc/osmocom'
make[4]: Leaving directory '/build/osmo-bts/doc/examples'
make[3]: Leaving directory '/build/osmo-bts/doc/examples'
Making install in manuals
make[3]: Entering directory '/build/osmo-bts/doc/manuals'
make[4]: Entering directory '/build/osmo-bts/doc/manuals'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/doc/manuals'
make[3]: Leaving directory '/build/osmo-bts/doc/manuals'
make[3]: Entering directory '/build/osmo-bts/doc'
make[4]: Entering directory '/build/osmo-bts/doc'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/doc'
make[3]: Leaving directory '/build/osmo-bts/doc'
make[2]: Leaving directory '/build/osmo-bts/doc'
Making install in contrib
make[2]: Entering directory '/build/osmo-bts/contrib'
Making install in systemd
make[3]: Entering directory '/build/osmo-bts/contrib/systemd'
make[4]: Entering directory '/build/osmo-bts/contrib/systemd'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Leaving directory '/build/osmo-bts/contrib/systemd'
make[3]: Leaving directory '/build/osmo-bts/contrib/systemd'
Making install in ber
make[3]: Entering directory '/build/osmo-bts/contrib/ber'
make[4]: Entering directory '/build/osmo-bts/contrib/ber'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/contrib/ber'
make[3]: Leaving directory '/build/osmo-bts/contrib/ber'
make[3]: Entering directory '/build/osmo-bts/contrib'
make[4]: Entering directory '/build/osmo-bts/contrib'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/osmo-bts/contrib'
make[3]: Leaving directory '/build/osmo-bts/contrib'
make[2]: Leaving directory '/build/osmo-bts/contrib'
make[2]: Entering directory '/build/osmo-bts'
make[3]: Entering directory '/build/osmo-bts'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/osmo-bts'
make[2]: Leaving directory '/build/osmo-bts'
make[1]: Leaving directory '/build/osmo-bts'
+ create_bin_tgz osmo-bts-trx osmo-bts-octphy osmo-bts-virtual
+ wanted_binaries_bin=osmo-bts-trx osmo-bts-octphy osmo-bts-virtual
+ wanted_binaries_sbin=
+ [ -z osmo-bts-trx osmo-bts-octphy osmo-bts-virtual ]
+ prune_files bin osmo-bts-trx osmo-bts-octphy osmo-bts-virtual
+ bindir=bin
+ wanted_binaries=osmo-bts-trx osmo-bts-octphy osmo-bts-virtual
+ [ ! -d /build/inst-osmo-bts/bin ]
+ cd /build/inst-osmo-bts/bin
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-aka-verify
+ [ -z ]
+ rm osmo-aka-verify
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-arfcn
+ [ -z ]
+ rm osmo-arfcn
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-auc-gen
+ [ -z ]
+ rm osmo-auc-gen
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-bts-octphy
+ [ -z _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _ ]
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-bts-omldummy
+ [ -z ]
+ rm osmo-bts-omldummy
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-bts-trx
+ [ -z _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _ ]
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-bts-virtual
+ [ -z _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _ ]
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-config-merge
+ [ -z ]
+ rm osmo-config-merge
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-gsmtap-logsend
+ [ -z ]
+ rm osmo-gsmtap-logsend
+ echo _ osmo-bts-trx osmo-bts-octphy osmo-bts-virtual _
+ grep osmo-release.sh
+ [ -z ]
+ rm osmo-release.sh
+ [ ! -f osmo-bts-trx ]
+ [ ! -f osmo-bts-octphy ]
+ [ ! -f osmo-bts-virtual ]
+ prune_files sbin
+ bindir=sbin
+ wanted_binaries=
+ [ ! -d /build/inst-osmo-bts/sbin ]
+ return
+ rm -f /build/inst-osmo-bts/lib/libosmoabis.a /build/inst-osmo-bts/lib/libosmonetif.a /build/inst-osmo-bts/lib/libosmotrau.a
+ rm -f /build/inst-osmo-bts/lib/libosmoabis.la /build/inst-osmo-bts/lib/libosmocodec.la /build/inst-osmo-bts/lib/libosmocoding.la /build/inst-osmo-bts/lib/libosmocore.la /build/inst-osmo-bts/lib/libosmoctrl.la /build/inst-osmo-bts/lib/libosmogb.la /build/inst-osmo-bts/lib/libosmogsm.la /build/inst-osmo-bts/lib/libosmoisdn.la /build/inst-osmo-bts/lib/libosmonetif.la /build/inst-osmo-bts/lib/libosmosim.la /build/inst-osmo-bts/lib/libosmotrau.la /build/inst-osmo-bts/lib/libosmousb.la /build/inst-osmo-bts/lib/libosmovty.la
+ cd /build/inst-osmo-bts
+ add_rpath
+ rpath_args=--set-rpath
+ rpath_dir=$ORIGIN/../lib/
+ [ -n ]
+ [ -n ]
+ [ -d bin/ ]
+ find bin -depth -type f -exec patchelf --set-rpath $ORIGIN/../lib/ {} ;
+ [ -d sbin/ ]
+ [ -d lib/ ]
+ find lib -depth -type f -name lib*.so.* -exec patchelf --set-rpath $ORIGIN/ {} ;
+ date +%Y-%m-%d_%H_%M_%S
+ this=osmo-bts.build-2024-12-15_00_53_04
+ tar=osmo-bts.build-2024-12-15_00_53_04.tgz
+ tar czf /build/osmo-bts.build-2024-12-15_00_53_04.tgz bin etc include lib osmo-bts_git_hashes.txt share
+ cd /build
+ md5sum osmo-bts.build-2024-12-15_00_53_04.tgz
Archiving artifacts
osmo-gsm-tester_run is disabled. Triggering skipped
osmo-gsm-tester_run-prod is disabled. Triggering skipped
osmo-gsm-tester_run-prod_handover is disabled. Triggering skipped
osmo-gsm-tester_run-rnd is disabled. Triggering skipped
Finished: SUCCESS
![[Jenkins]](/jenkins/static/b68c8964/images/svgs/logo.svg){kind=logo}
