Skip to content

Failed

gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)

Failing for the past 3 builds (Since #2063 )
Took 5 min 55 sec.

Stacktrace

iperf3-cli_10.42.42.10(pid=31637): Wait timeout {condition=<bound method Process.terminated of iperf3-cli_10.42.42.10(pid=31637)>, timeout=180, timestep=1} [trial-2065↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪iperf3-srv_10.42.42.10↪iperf3-cli_10.42.42.10↪iperf3-cli_10.42.42.10(pid=31637)]

Standard Output

----------------------------------------------
trial-2065 gprs:sysmo cs_paging_gprs_active.py
----------------------------------------------
12:12:04.055717 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.066624 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
12:12:04.197045 tst         cs_paging_gprs_active.py: using LAC 3952
12:12:04.324048 tst         cs_paging_gprs_active.py: using RAC 127
12:12:04.450591 tst         cs_paging_gprs_active.py: using CellId 3952
12:12:04.576826 tst         cs_paging_gprs_active.py: using BVCI 3953
12:12:04.601772 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.612831 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.623821 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.634683 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.645607 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.656530 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.667535 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.678343 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
12:12:04.689525 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
12:12:04.806763 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
12:12:05.083046 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
12:12:05.210837 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:12:05.525664 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31521): Launched
12:12:05.791131 run iperf3-srv_10.42.42.10(pid=31522): Launched
12:12:05.975852 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
12:12:06.102609 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
12:12:06.417941 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31523): Launched
12:12:06.678844 run iperf3-srv_10.42.42.10(pid=31524): Launched
12:12:06.863469 tst      cs_paging_gprs_active.py:38: start network...
12:12:06.989508 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
12:12:07.471808 run         create_hlr_db(pid=31525): Launched
12:12:07.647157 bus                        /sierra_2: Setting Powered False
12:12:08.668922 run         create_hlr_db(pid=31525): Terminated: ok {rc=0}
12:12:09.102404 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31527): Launched
12:12:09.429805 run   osmo-hlr_10.42.42.2(pid=31528): Launched
12:12:09.548445 run              osmo-stp_10.42.42.5: Starting osmo-stp
12:12:10.113122 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31529): Launched
12:12:10.438355 run   osmo-stp_10.42.42.5(pid=31530): Launched
12:12:10.555443 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
12:12:12.143787 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31531): Launched
12:12:12.260042 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
12:12:12.549292 run              patchelf(pid=31532): Launched
12:12:13.742380 run              patchelf(pid=31532): Terminated: ok {rc=0}
12:12:13.862122 run             osmo-ggsn_10.42.42.6: Applying CAP_NET_ADMIN capability to osmo-ggsn
12:12:14.157772 run osmo-gsm-tester_setcap_net_admin.sh(pid=31534): Launched
12:12:15.352047 run osmo-gsm-tester_setcap_net_admin.sh(pid=31534): Terminated: ok {rc=0}
12:12:15.681887 run  osmo-ggsn_10.42.42.6(pid=31537): Launched
12:12:15.962271 run             osmo-sgsn_10.42.42.7: Starting osmo-sgsn
12:12:20.735626 run pcap-recorder_any(filters='host 10.42.42.7')(pid=31556): Launched
12:12:21.040705 run  osmo-sgsn_10.42.42.7(pid=31557): Launched
12:12:21.152546 run              osmo-msc_10.42.42.8: Starting osmo-msc
12:12:21.741871 run pcap-recorder_any(filters='host 10.42.42.8 and port not 22')(pid=31558): Launched
12:12:22.071233 run   osmo-msc_10.42.42.8(pid=31559): Launched
12:12:25.245602 run              osmo-mgw_10.42.42.3: Starting osmo-mgw
12:12:25.812550 run pcap-recorder_any(filters='host 10.42.42.3 and port not 22')(pid=31560): Launched
12:12:26.138258 run   osmo-mgw_10.42.42.3(pid=31561): Launched
12:12:26.258525 run              osmo-mgw_10.42.42.4: Starting osmo-mgw
12:12:26.816778 run pcap-recorder_any(filters='host 10.42.42.4 and port not 22')(pid=31562): Launched
12:12:27.146090 run   osmo-mgw_10.42.42.4(pid=31563): Launched
12:12:27.278520 run              osmo-bsc_10.42.42.9: Starting osmo-bsc
12:12:27.963747 run pcap-recorder_any(filters='host 10.42.42.9 and port not 22')(pid=31564): Launched
12:12:28.292190 run   osmo-bsc_10.42.42.9(pid=31565): Launched
12:12:34.574420 run                   osmo-bts-sysmo: Starting sysmoBTS to connect to osmo-bsc_10.42.42.9
12:12:35.156384 run         rm-remote-dir(pid=31566): Launched
12:12:37.358586 run         rm-remote-dir(pid=31566): Terminated: ok {rc=0}
12:12:37.709705 run         mk-remote-dir(pid=31567): Launched
12:12:38.909051 run         mk-remote-dir(pid=31567): Terminated: ok {rc=0}
12:12:39.205674 run    scp-inst-to-remote(pid=31568): Launched
12:12:51.423534 run    scp-inst-to-remote(pid=31568): Terminated: ok {rc=0}
12:12:51.768662 run         mk-remote-dir(pid=31570): Launched
12:12:52.964901 run         mk-remote-dir(pid=31570): Terminated: ok {rc=0}
12:12:53.261080 run     scp-cfg-to-remote(pid=31571): Launched
12:12:54.459583 run     scp-cfg-to-remote(pid=31571): Terminated: ok {rc=0}
12:12:54.801353 run   reload-dsp-firmware(pid=31573): Launched
12:12:56.986545 run   reload-dsp-firmware(pid=31573): Terminated: ok {rc=0}
12:12:57.294842 run        osmo-bts-sysmo(pid=31574): Launched
12:13:01.591760 tst      cs_paging_gprs_active.py:38: Waiting for bts to be ready...
12:13:03.547375 run         rm-remote-dir(pid=31575): Launched
12:13:05.729377 run         rm-remote-dir(pid=31575): Terminated: ok {rc=0}
12:13:06.043940 run         mk-remote-dir(pid=31576): Launched
12:13:08.225352 run         mk-remote-dir(pid=31576): Terminated: ok {rc=0}
12:13:08.496438 run       scp-inst-to-bts(pid=31577): Launched
12:13:21.692304 run       scp-inst-to-bts(pid=31577): Terminated: ok {rc=0}
12:13:22.005456 run     mk-remote-run-dir(pid=31579): Launched
12:13:24.188612 run     mk-remote-run-dir(pid=31579): Terminated: ok {rc=0}
12:13:24.457813 run   scp-cfg-to-sysmobts(pid=31580): Launched
12:13:26.639525 run   scp-cfg-to-sysmobts(pid=31580): Terminated: ok {rc=0}
12:13:26.954562 run              osmo-pcu(pid=31582): Launched
12:13:27.082457 tst         cs_paging_gprs_active.py: using MSISDN 3960
12:13:27.254859 bus                          /gobi_6: Setting Powered True
12:13:30.749219 run              osmo-hlr_10.42.42.2: Add subscriber {algo=1, algo_str='comp128v1', imsi='901700000010978', msisdn='3960', subscriber_id=1}
12:13:31.038524 bus                          /gobi_6: Setting Online False
12:13:32.234200 bus                          /gobi_6: Setting Powered False
12:13:39.232271 bus                          /gobi_6: Setting Powered True
12:13:40.603847 bus                          /gobi_6: Setting Online True
12:13:43.017906 tst                          /gobi_6: Connect to ('901', '70')
12:13:43.293670 tst                          /gobi_6: Manufacturer: 'Quectel', Model: 'EC20', Revision: 'EC20EQAR02A13E2G  1  [Jul  5 2017 10:49:17]', Serial: '868323024273648'
12:13:43.424319 tst         cs_paging_gprs_active.py: using MSISDN 3961
12:13:43.644150 bus                          /gobi_0: Setting Powered True
12:13:47.131662 run              osmo-hlr_10.42.42.2: Add subscriber {algo=1, algo_str='comp128v1', imsi='901700000023847', msisdn='3961', subscriber_id=2}
12:13:47.417303 bus                          /gobi_0: Setting Online False
12:13:48.603833 bus                          /gobi_0: Setting Powered False
12:13:55.363758 bus                          /gobi_0: Setting Powered True
12:13:56.755421 bus                          /gobi_0: Setting Online True
12:13:58.277421 tst                          /gobi_6: Already registered with network ('901', '70')
12:13:59.208141 tst                          /gobi_0: Connect to ('901', '70')
12:13:59.488711 tst                          /gobi_0: Manufacturer: 'Quectel', Model: 'EC20', Revision: 'EC20EQAR02A05E2G  1  [Mar 14 2016 19:33:01]', Serial: '868323024271873'
12:13:59.687334 tst      cs_paging_gprs_active.py:38: waiting for modems to attach...
12:14:13.849239 tst                          /gobi_0: Already registered with network ('901', '70')
12:14:19.337698 tst      cs_paging_gprs_active.py:38: waiting for modems to attach to data services...
12:14:22.394088 tst                          /gobi_6: context activated {apn='inet46', path='/gobi_6/context2', properties={AccessPointName='inet46', Active=True, AuthenticationMethod='chap', IPv6.Settings={}, Name='Internet', Password='', Protocol='ip', Settings={Address='176.16.46.1', DomainNameServers=['192.168.100.1', '8.8.8.8'], Gateway='176.16.46.2', Interface='r433306bbc2604b', Method='static', Netmask='255.255.255.252'}, Type='internet', Username='ogt'}, user='ogt'}
12:14:22.593327 tst      cs_paging_gprs_active.py:38: Setting up data plan for "'/gobi_6/context2'"
12:14:22.953728 run            move_netns(pid=31585): Launched
12:14:24.136771 run            move_netns(pid=31585): Terminated: ok {rc=0}
12:14:24.465729 run                  ifup(pid=31588): Launched
12:14:25.646873 run                  ifup(pid=31588): Terminated: ok {rc=0}
12:14:25.981480 run                  dhcp(pid=31591): Launched
12:14:27.164220 run                  dhcp(pid=31591): Terminated: ok {rc=0}
12:14:31.511633 tst                          /gobi_0: context activated {apn='inet46', path='/gobi_0/context3', properties={AccessPointName='inet46', Active=True, AuthenticationMethod='chap', IPv6.Settings={}, Name='Internet', Password='', Protocol='ip', Settings={Address='176.16.46.2', DomainNameServers=['192.168.100.1', '8.8.8.8'], Gateway='176.16.46.1', Interface='r82dcf628584c1c', Method='static', Netmask='255.255.255.252'}, Type='internet', Username='ogt'}, user='ogt'}
12:14:31.696242 tst      cs_paging_gprs_active.py:38: Setting up data plan for "'/gobi_0/context3'"
12:14:32.047944 run            move_netns(pid=31609): Launched
12:14:33.229411 run            move_netns(pid=31609): Terminated: ok {rc=0}
12:14:33.556565 run                  ifup(pid=31612): Launched
12:14:34.749253 run                  ifup(pid=31612): Terminated: ok {rc=0}
12:14:35.095198 run                  dhcp(pid=31615): Launched
12:14:36.288883 run                  dhcp(pid=31615): Terminated: ok {rc=0}
12:14:36.497374 tst      cs_paging_gprs_active.py:38: Running iperf3 client to 10.42.42.10:5003 through "'/gobi_6/context2'"
12:14:36.636637 run           iperf3-cli_10.42.42.10: Preparing iperf3-client connecting to 10.42.42.10:5003 (proto=tcp,time=60s)
12:14:37.039612 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631): Launched
12:14:37.290874 tst      cs_paging_gprs_active.py:38: Running iperf3 client to 10.42.42.10:5004 through "'/gobi_0/context3'"
12:14:37.428007 run           iperf3-cli_10.42.42.10: Preparing iperf3-client connecting to 10.42.42.10:5004 (proto=tcp,time=60s)
12:14:37.827021 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634): Launched
12:14:38.159817 run iperf3-cli_10.42.42.10(pid=31637): Launched
12:14:38.451820 run iperf3-cli_10.42.42.10(pid=31640): Launched
12:14:38.674541 tst      cs_paging_gprs_active.py:13: waiting a few secs to make sure iperf3 test is running
12:14:40.929611 tst      cs_paging_gprs_active.py:16: iperf3 running, let's place a call
12:14:44.699774 tst      cs_paging_gprs_active.py:22: dial success
12:14:47.451783 tst      cs_paging_gprs_active.py:28: answer success, call established and ongoing
12:14:54.040903 tst      cs_paging_gprs_active.py:35: hangup success
12:17:54.550962 run iperf3-cli_10.42.42.10(pid=31637): Terminating (SIGINT)
12:17:54.954824 run iperf3-cli_10.42.42.10(pid=31637)-killSignals.SIGINT(pid=31661): Launched
12:17:56.171105 run iperf3-cli_10.42.42.10(pid=31637)-killSignals.SIGINT(pid=31661): Terminated: ok {rc=0}
12:17:56.357732 run iperf3-cli_10.42.42.10(pid=31637): Terminated {rc=130}
12:17:56.488182 run iperf3-cli_10.42.42.10(pid=31640): Terminating (SIGINT)
12:17:56.862324 run iperf3-cli_10.42.42.10(pid=31640)-killSignals.SIGINT(pid=31664): Launched
12:17:58.077354 run iperf3-cli_10.42.42.10(pid=31640)-killSignals.SIGINT(pid=31664): Terminated: ok {rc=0}
12:17:58.260780 run iperf3-cli_10.42.42.10(pid=31640): Terminated {rc=1}
12:17:58.292087 tst      cs_paging_gprs_active.py:38: ERR: Error: iperf3-cli_10.42.42.10(pid=31637): Wait timeout {condition=&lt;bound method Process.terminated of iperf3-cli_10.42.42.10(pid=31637)&gt;, timeout=180, timestep=1} [trial-2065↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪iperf3-srv_10.42.42.10↪iperf3-cli_10.42.42.10↪iperf3-cli_10.42.42.10(pid=31637)]  [trial-2065↪gprs:sysmo↪cs_paging_gprs_active.py:38]
12:17:58.300133 tst      cs_paging_gprs_active.py:38: Test FAILED (354.3 sec)
12:17:58.336673 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31521): Terminating (SIGTERM)
12:17:58.379381 run iperf3-srv_10.42.42.10(pid=31522): Terminating (SIGTERM)
12:17:58.422840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31523): Terminating (SIGTERM)
12:17:58.464560 run iperf3-srv_10.42.42.10(pid=31524): Terminating (SIGTERM)
12:17:58.506684 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31527): Terminating (SIGTERM)
12:17:58.548640 run   osmo-hlr_10.42.42.2(pid=31528): Terminating (SIGTERM)
12:17:58.592358 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31529): Terminating (SIGTERM)
12:17:58.635533 run   osmo-stp_10.42.42.5(pid=31530): Terminating (SIGTERM)
12:17:58.699629 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31531): Terminating (SIGTERM)
12:17:58.743266 run  osmo-ggsn_10.42.42.6(pid=31537): Terminating (SIGTERM)
12:17:58.840833 run pcap-recorder_any(filters='host 10.42.42.7')(pid=31556): Terminating (SIGTERM)
12:17:58.884576 run  osmo-sgsn_10.42.42.7(pid=31557): Terminating (SIGTERM)
12:17:58.928851 run pcap-recorder_any(filters='host 10.42.42.8 and port not 22')(pid=31558): Terminating (SIGTERM)
12:17:58.978664 run   osmo-msc_10.42.42.8(pid=31559): Terminating (SIGTERM)
12:17:59.022832 run pcap-recorder_any(filters='host 10.42.42.3 and port not 22')(pid=31560): Terminating (SIGTERM)
12:17:59.065838 run   osmo-mgw_10.42.42.3(pid=31561): Terminating (SIGTERM)
12:17:59.109585 run pcap-recorder_any(filters='host 10.42.42.4 and port not 22')(pid=31562): Terminating (SIGTERM)
12:17:59.152453 run   osmo-mgw_10.42.42.4(pid=31563): Terminating (SIGTERM)
12:17:59.195930 run pcap-recorder_any(filters='host 10.42.42.9 and port not 22')(pid=31564): Terminating (SIGTERM)
12:17:59.238783 run   osmo-bsc_10.42.42.9(pid=31565): Terminating (SIGTERM)
12:17:59.282578 run        osmo-bts-sysmo(pid=31574): Terminating (SIGTERM)
12:17:59.327027 run              osmo-pcu(pid=31582): Terminating (SIGTERM)
12:17:59.371869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631): Terminating (SIGTERM)
12:17:59.525110 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631)-killSignals.SIGTERM(pid=31678): Launched
12:18:00.622584 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631)-killSignals.SIGTERM(pid=31678): Terminated: ok {rc=0}
12:18:00.670647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634): Terminating (SIGTERM)
12:18:00.827925 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634)-killSignals.SIGTERM(pid=31685): Launched
12:18:01.923250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634)-killSignals.SIGTERM(pid=31685): Terminated: ok {rc=0}
12:18:01.937927 ---      ParallelTerminationStrategy: PID 31521 died...
12:18:01.995060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31521): Terminated: ok {rc=0}
12:18:02.005387 ---      ParallelTerminationStrategy: PID 31522 died...
12:18:02.062178 run iperf3-srv_10.42.42.10(pid=31522): Terminated {rc=256}
12:18:02.072601 ---      ParallelTerminationStrategy: PID 31523 died...
12:18:02.129598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31523): Terminated: ok {rc=0}
12:18:02.139974 ---      ParallelTerminationStrategy: PID 31524 died...
12:18:02.196475 run iperf3-srv_10.42.42.10(pid=31524): Terminated {rc=256}
12:18:02.206638 ---      ParallelTerminationStrategy: PID 31527 died...
12:18:02.263187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31527): Terminated: ok {rc=0}
12:18:02.273417 ---      ParallelTerminationStrategy: PID 31528 died...
12:18:02.329734 run   osmo-hlr_10.42.42.2(pid=31528): Terminated: ok {rc=0}
12:18:02.339974 ---      ParallelTerminationStrategy: PID 31529 died...
12:18:02.396859 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31529): Terminated: ok {rc=0}
12:18:02.407248 ---      ParallelTerminationStrategy: PID 31530 died...
12:18:02.463847 run   osmo-stp_10.42.42.5(pid=31530): Terminated: ok {rc=0}
12:18:02.474151 ---      ParallelTerminationStrategy: PID 31531 died...
12:18:02.531113 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31531): Terminated: ok {rc=0}
12:18:02.541236 ---      ParallelTerminationStrategy: PID 31537 died...
12:18:02.597801 run  osmo-ggsn_10.42.42.6(pid=31537): Terminated: ok {rc=0}
12:18:02.608126 ---      ParallelTerminationStrategy: PID 31556 died...
12:18:02.664349 run pcap-recorder_any(filters='host 10.42.42.7')(pid=31556): Terminated: ok {rc=0}
12:18:02.674467 ---      ParallelTerminationStrategy: PID 31557 died...
12:18:02.730914 run  osmo-sgsn_10.42.42.7(pid=31557): Terminated: ok {rc=0}
12:18:02.741492 ---      ParallelTerminationStrategy: PID 31558 died...
12:18:02.797888 run pcap-recorder_any(filters='host 10.42.42.8 and port not 22')(pid=31558): Terminated: ok {rc=0}
12:18:02.808394 ---      ParallelTerminationStrategy: PID 31559 died...
12:18:02.865176 run   osmo-msc_10.42.42.8(pid=31559): Terminated: ok {rc=0}
12:18:02.875632 ---      ParallelTerminationStrategy: PID 31560 died...
12:18:02.932441 run pcap-recorder_any(filters='host 10.42.42.3 and port not 22')(pid=31560): Terminated: ok {rc=0}
12:18:02.942871 ---      ParallelTerminationStrategy: PID 31561 died...
12:18:02.999566 run   osmo-mgw_10.42.42.3(pid=31561): Terminated {rc=15}
12:18:03.009927 ---      ParallelTerminationStrategy: PID 31562 died...
12:18:03.066958 run pcap-recorder_any(filters='host 10.42.42.4 and port not 22')(pid=31562): Terminated: ok {rc=0}
12:18:03.077169 ---      ParallelTerminationStrategy: PID 31563 died...
12:18:03.133743 run   osmo-mgw_10.42.42.4(pid=31563): Terminated {rc=15}
12:18:03.144127 ---      ParallelTerminationStrategy: PID 31564 died...
12:18:03.200732 run pcap-recorder_any(filters='host 10.42.42.9 and port not 22')(pid=31564): Terminated: ok {rc=0}
12:18:03.211178 ---      ParallelTerminationStrategy: PID 31565 died...
12:18:03.267527 run   osmo-bsc_10.42.42.9(pid=31565): Terminated: ok {rc=0}
12:18:03.278093 ---      ParallelTerminationStrategy: PID 31574 died...
12:18:03.335313 run        osmo-bts-sysmo(pid=31574): Terminated: ok {rc=0}
12:18:03.345603 ---      ParallelTerminationStrategy: PID 31582 died...
12:18:03.402669 run              osmo-pcu(pid=31582): Terminated: ok {rc=0}
12:18:09.270365 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631): Terminating (SIGINT)
12:18:09.423145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631)-killSignals.SIGINT(pid=31688): Launched
12:18:10.519224 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631)-killSignals.SIGINT(pid=31688): Terminated: ok {rc=0}
12:18:10.567199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634): Terminating (SIGINT)
12:18:10.723322 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634)-killSignals.SIGINT(pid=31691): Launched
12:18:11.816761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634)-killSignals.SIGINT(pid=31691): Terminated: ok {rc=0}
12:18:17.689111 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631): Terminating (SIGKILL)
12:18:17.844001 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631)-killSignals.SIGUSR1(pid=31696): Launched
12:18:18.937990 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31631)-killSignals.SIGUSR1(pid=31696): Terminated: ok {rc=0}
12:18:18.985289 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634): Terminating (SIGKILL)
12:18:19.135397 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634)-killSignals.SIGUSR1(pid=31699): Launched
12:18:20.228310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31634)-killSignals.SIGUSR1(pid=31699): Terminated: ok {rc=0}
12:18:20.482192 bus                          /gobi_0: Setting Online False
12:18:21.621599 bus                          /gobi_0: Setting Powered False
12:18:37.976054 bus                          /gobi_0: Setting Powered False
12:18:39.082329 bus                          /gobi_0: Setting Powered False
12:18:40.239223 bus                          /gobi_6: Setting Online False
12:18:41.367497 bus                          /gobi_6: Setting Powered False
12:18:49.981512 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_gerrit/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_gerrit/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_gerrit/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module>
    setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall)
  File "/home/jenkins/workspace/osmo-gsm-tester_gerrit/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 100, in setup_run_iperf3_test_parallel
    run_iperf3_cli_parallel(clients, ms_li, ready_cb)
  File "/home/jenkins/workspace/osmo-gsm-tester_gerrit/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 27, in run_iperf3_cli_parallel
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_gerrit/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 20, in run_iperf3_cli_parallel
    proc.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_gerrit/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_gerrit/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 109, in wait
    raise log.Error('Wait timeout', condition=condition, timeout=timeout, timestep=timestep)
osmo_gsm_tester.core.log.Error: iperf3-cli_10.42.42.10(pid=31637): Wait timeout {condition=<bound method Process.terminated of iperf3-cli_10.42.42.10(pid=31637)>, timeout=180, timestep=1} [trial-2065↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪iperf3-srv_10.42.42.10↪iperf3-cli_10.42.42.10↪iperf3-cli_10.42.42.10(pid=31637)]