Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 220 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=25412): Process ended prematurely: osmo-stp_10.42.42.5(pid=25412) [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25412)]

Standard Output

----------------------------------------------
trial-2358 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
10:16:56.676465 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:56.688814 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
10:16:56.845258 tst                        iperf3.py: using LAC 20771
10:16:56.967091 tst                        iperf3.py: using RAC 116
10:16:57.085770 tst                        iperf3.py: using CellId 20771
10:16:57.204239 tst                        iperf3.py: using BVCI 20772
10:16:57.228032 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:57.239381 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:57.250626 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:57.261771 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:57.272755 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:57.283716 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:57.294901 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:57.305842 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
10:16:57.317282 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
10:16:57.596802 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
10:16:57.725231 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:16:58.044421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25401): Launched
10:16:58.309762 run iperf3-srv_10.42.42.10(pid=25402): Launched
10:16:58.495764 tst                      iperf3.py:8: start network...
10:16:58.622935 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:16:59.115942 run         create_hlr_db(pid=25403): Launched
10:16:59.292873 bus                          /gobi_6: Setting Powered False
10:17:00.313623 run         create_hlr_db(pid=25403): Terminated: ok {rc=0}
10:17:00.751740 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25405): Launched
10:17:01.200266 run   osmo-hlr_10.42.42.2(pid=25406): Launched
10:17:01.485361 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:17:02.074918 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25411): Launched
10:17:02.399306 run   osmo-stp_10.42.42.5(pid=25412): Launched
10:17:02.519742 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:17:03.102576 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25414): Launched
10:17:03.220325 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:17:03.508233 run              patchelf(pid=25415): Launched
10:17:03.700810 run   osmo-stp_10.42.42.5(pid=25412): ERR: Terminated: ERROR {rc=1}  [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25412)]
10:17:03.841476 run   osmo-stp_10.42.42.5(pid=25412): stdout: 
| (launched: 2022-12-09_10:17:02.236708)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:17:03.982215 run   osmo-stp_10.42.42.5(pid=25412): stderr: 
| �[0;m�[38;5;43m20221209101702423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209101702423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209101702423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209101702424 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209101702424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209101702424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209101702424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:17:04.118645 run   osmo-stp_10.42.42.5(pid=25412): stdout: 
| (launched: 2022-12-09_10:17:02.236708)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:17:04.254402 run   osmo-stp_10.42.42.5(pid=25412): stderr: 
| �[0;m�[38;5;43m20221209101702423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209101702423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209101702423 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209101702424 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209101702424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209101702424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209101702424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:17:04.411516 run              patchelf(pid=25415): Terminating (SIGINT)
10:17:04.596377 run              patchelf(pid=25415): Terminated: ok {rc=0}
10:17:04.630451 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=25412): Process ended prematurely: osmo-stp_10.42.42.5(pid=25412) [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25412)]  [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
10:17:04.640602 tst                      iperf3.py:8: Test FAILED (8.0 sec)
10:17:04.704887 run   osmo-hlr_10.42.42.2(pid=25406): ERR: Terminated: ERROR {rc=237}  [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25406)]
10:17:04.757011 run   osmo-hlr_10.42.42.2(pid=25406): stdout: 
| (launched: 2022-12-09_10:17:00.938806) 
10:17:04.809856 run   osmo-hlr_10.42.42.2(pid=25406): stderr: 
| �[0;m�[1;31m20221209101701278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209101701278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209101701278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209101701278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209101701278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209101701278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209101701295 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209101701311 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209101701312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209101701312 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:17:04.854817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25401): Terminating (SIGTERM)
10:17:04.896755 run iperf3-srv_10.42.42.10(pid=25402): Terminating (SIGTERM)
10:17:04.939477 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25405): Terminating (SIGTERM)
10:17:04.982106 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25411): Terminating (SIGTERM)
10:17:05.024712 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25414): Terminating (SIGTERM)
10:17:05.034563 ---      ParallelTerminationStrategy: PID 25401 died...
10:17:05.091311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25401): Terminated: ok {rc=0}
10:17:05.101827 ---      ParallelTerminationStrategy: PID 25402 died...
10:17:05.158048 run iperf3-srv_10.42.42.10(pid=25402): Terminated {rc=256}
10:17:05.168117 ---      ParallelTerminationStrategy: PID 25405 died...
10:17:05.224385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25405): Terminated: ok {rc=0}
10:17:05.234484 ---      ParallelTerminationStrategy: PID 25411 died...
10:17:05.291145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25411): Terminated: ok {rc=0}
10:17:05.301393 ---      ParallelTerminationStrategy: PID 25414 died...
10:17:05.357792 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25414): Terminated: ok {rc=0}
10:17:05.445866 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25412): Process ended prematurely: osmo-stp_10.42.42.5(pid=25412) [trial-2358↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25412)]