Failed
gprs:sysmo+mod-bts0-egprs.ping.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=2395): Process ended prematurely: osmo-stp_10.42.42.5(pid=2395) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2395)]
Standard Output
---------------------------------------------- trial-2363 gprs:sysmo+mod-bts0-egprs ping.py ---------------------------------------------- 18:44:49.104379 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:49.115442 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:44:49.248172 tst ping.py: using LAC 22975 18:44:49.373403 tst ping.py: using RAC 25 18:44:49.503598 tst ping.py: using CellId 22975 18:44:49.625993 tst ping.py: using BVCI 22976 18:44:49.650557 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:49.662091 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:49.673469 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:49.684652 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:49.696118 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:49.707597 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:49.719547 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:49.730793 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:44:50.021192 tst ping.py:19: start network... 18:44:50.153176 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:44:50.648859 run create_hlr_db(pid=2389): Launched 18:44:50.833296 bus /gobi_6: Setting Powered False 18:44:51.853302 run create_hlr_db(pid=2389): Terminated: ok {rc=0} 18:44:52.273993 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2391): Launched 18:44:52.590922 run osmo-hlr_10.42.42.2(pid=2392): Launched 18:44:52.703515 run osmo-stp_10.42.42.5: Starting osmo-stp 18:44:53.214089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2394): Launched 18:44:53.506134 run osmo-stp_10.42.42.5(pid=2395): Launched 18:44:53.612361 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:44:54.123475 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2397): Launched 18:44:54.227346 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:44:54.483292 run patchelf(pid=2398): Launched 18:44:54.654333 run osmo-stp_10.42.42.5(pid=2395): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2395)] 18:44:54.779205 run osmo-stp_10.42.42.5(pid=2395): stdout: | (launched: 2022-12-09_18:44:53.362618) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:44:54.904159 run osmo-stp_10.42.42.5(pid=2395): stderr: | �[0;m�[38;5;43m20221209184453533 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184453533 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184453533 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184453534 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184453534 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184453534 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184453534 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:44:55.024824 run osmo-stp_10.42.42.5(pid=2395): stdout: | (launched: 2022-12-09_18:44:53.362618) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:44:55.144858 run osmo-stp_10.42.42.5(pid=2395): stderr: | �[0;m�[38;5;43m20221209184453533 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184453533 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184453533 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184453534 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184453534 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184453534 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184453534 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:44:55.284408 run patchelf(pid=2398): Terminating (SIGINT) 18:44:55.448243 run patchelf(pid=2398): Terminated: ok {rc=0} 18:44:55.478106 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=2395): Process ended prematurely: osmo-stp_10.42.42.5(pid=2395) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2395)] [trial-2363↪gprs:sysmo+mod-bts0-egprs↪ping.py:22] 18:44:55.486588 tst ping.py:22: Test FAILED (6.4 sec) 18:44:55.545318 run osmo-hlr_10.42.42.2(pid=2392): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:sysmo+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2392)] 18:44:55.593323 run osmo-hlr_10.42.42.2(pid=2392): stdout: | (launched: 2022-12-09_18:44:52.434906) 18:44:55.641726 run osmo-hlr_10.42.42.2(pid=2392): stderr: | �[0;m�[1;31m20221209184452630 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209184452630 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209184452631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209184452631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209184452631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209184452631 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209184452643 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:sysmo+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209184452651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209184452651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209184452651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:44:55.682897 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2391): Terminating (SIGTERM) 18:44:55.721741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2394): Terminating (SIGTERM) 18:44:55.760562 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2397): Terminating (SIGTERM) 18:44:55.769600 --- ParallelTerminationStrategy: PID 2391 died... 18:44:55.821804 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2391): Terminated: ok {rc=0} 18:44:55.831249 --- ParallelTerminationStrategy: PID 2394 died... 18:44:55.883155 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2394): Terminated: ok {rc=0} 18:44:55.892523 --- ParallelTerminationStrategy: PID 2397 died... 18:44:55.944486 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2397): Terminated: ok {rc=0} 18:44:56.026220 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2395): Process ended prematurely: osmo-stp_10.42.42.5(pid=2395) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2395)]