Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 225 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8073): Process ended prematurely: osmo-stp_10.42.42.5(pid=8073) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8073)]

Standard Output

----------------------------------------------
trial-2363 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
19:42:56.792726 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:56.804211 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
19:42:56.962649 tst                        iperf3.py: using LAC 23284
19:42:57.090240 tst                        iperf3.py: using RAC 79
19:42:57.217385 tst                        iperf3.py: using CellId 23284
19:42:57.341568 tst                        iperf3.py: using BVCI 23285
19:42:57.365155 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:57.376261 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:57.387259 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:57.398748 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:57.410131 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:57.421864 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:57.433363 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:57.444661 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
19:42:57.456093 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
19:42:57.738327 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
19:42:57.866813 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:42:58.185058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8065): Launched
19:42:58.450190 run iperf3-srv_10.42.42.10(pid=8066): Launched
19:42:58.638294 tst                      iperf3.py:8: start network...
19:42:58.766341 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:42:59.258244 run          create_hlr_db(pid=8067): Launched
19:42:59.434479 bus                          /gobi_6: Setting Powered False
19:43:00.457151 run          create_hlr_db(pid=8067): Terminated: ok {rc=0}
19:43:00.901191 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8069): Launched
19:43:01.300188 run    osmo-hlr_10.42.42.2(pid=8070): Launched
19:43:01.458963 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:43:02.218743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8072): Launched
19:43:02.550502 run    osmo-stp_10.42.42.5(pid=8073): Launched
19:43:02.670974 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:43:03.243768 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8075): Launched
19:43:03.361396 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:43:03.647458 run               patchelf(pid=8076): Launched
19:43:03.838958 run    osmo-stp_10.42.42.5(pid=8073): ERR: Terminated: ERROR {rc=1}  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8073)]
19:43:03.979268 run    osmo-stp_10.42.42.5(pid=8073): stdout: 
| (launched: 2022-12-09_19:43:02.388448)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:43:04.119687 run    osmo-stp_10.42.42.5(pid=8073): stderr: 
| �[0;m�[38;5;43m20221209194302582 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209194302583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209194302583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209194302583 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209194302584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209194302584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209194302584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:43:04.255274 run    osmo-stp_10.42.42.5(pid=8073): stdout: 
| (launched: 2022-12-09_19:43:02.388448)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:43:04.389734 run    osmo-stp_10.42.42.5(pid=8073): stderr: 
| �[0;m�[38;5;43m20221209194302582 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209194302583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209194302583 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209194302583 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209194302584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209194302584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209194302584 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:43:04.546544 run               patchelf(pid=8076): Terminating (SIGINT)
19:43:04.730463 run               patchelf(pid=8076): Terminated: ok {rc=0}
19:43:04.764120 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8073): Process ended prematurely: osmo-stp_10.42.42.5(pid=8073) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8073)]  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
19:43:04.774226 tst                      iperf3.py:8: Test FAILED (8.0 sec)
19:43:04.837895 run    osmo-hlr_10.42.42.2(pid=8070): ERR: Terminated: ERROR {rc=237}  [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8070)]
19:43:04.889408 run    osmo-hlr_10.42.42.2(pid=8070): stdout: 
| (launched: 2022-12-09_19:43:01.075292) 
19:43:04.941513 run    osmo-hlr_10.42.42.2(pid=8070): stderr: 
| �[0;m�[1;31m20221209194301424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209194301424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209194301424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209194301424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209194301424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209194301424 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209194301455 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209194301470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209194301470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209194301470 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:43:04.985694 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8065): Terminating (SIGTERM)
19:43:05.028008 run iperf3-srv_10.42.42.10(pid=8066): Terminating (SIGTERM)
19:43:05.069860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8069): Terminating (SIGTERM)
19:43:05.111675 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8072): Terminating (SIGTERM)
19:43:05.153440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8075): Terminating (SIGTERM)
19:43:05.163426 ---      ParallelTerminationStrategy: PID 8065 died...
19:43:05.219362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8065): Terminated: ok {rc=0}
19:43:05.229551 ---      ParallelTerminationStrategy: PID 8066 died...
19:43:05.285033 run iperf3-srv_10.42.42.10(pid=8066): Terminated {rc=256}
19:43:05.295433 ---      ParallelTerminationStrategy: PID 8069 died...
19:43:05.351148 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8069): Terminated: ok {rc=0}
19:43:05.361567 ---      ParallelTerminationStrategy: PID 8072 died...
19:43:05.416668 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8072): Terminated: ok {rc=0}
19:43:05.426886 ---      ParallelTerminationStrategy: PID 8075 died...
19:43:05.482132 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8075): Terminated: ok {rc=0}
19:43:05.569492 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8073): Process ended prematurely: osmo-stp_10.42.42.5(pid=8073) [trial-2363↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8073)]