Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 228 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=30451): Process ended prematurely: osmo-stp_10.42.42.5(pid=30451) [trial-2366↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30451)]

Standard Output

----------------------------------------------
trial-2366 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
23:37:58.136103 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.148419 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
23:37:58.298028 tst                        iperf3.py: using LAC 24459
23:37:58.423583 tst                        iperf3.py: using RAC 234
23:37:58.548552 tst                        iperf3.py: using CellId 24459
23:37:58.674081 tst                        iperf3.py: using BVCI 24460
23:37:58.698591 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.710395 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.722067 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.733854 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.745662 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.757430 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.770064 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.781492 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:37:58.793366 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:37:59.071564 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
23:37:59.196703 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:37:59.505364 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30432): Launched
23:37:59.760886 run iperf3-srv_10.42.42.10(pid=30433): Launched
23:37:59.942984 tst                      iperf3.py:8: start network...
23:38:00.067527 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:38:00.546549 run         create_hlr_db(pid=30434): Launched
23:38:00.717515 bus                          /gobi_6: Setting Powered False
23:38:01.742170 run         create_hlr_db(pid=30434): Terminated: ok {rc=0}
23:38:02.209410 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30437): Launched
23:38:02.663731 run   osmo-hlr_10.42.42.2(pid=30447): Launched
23:38:02.843562 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:38:03.416835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30450): Launched
23:38:03.843202 run   osmo-stp_10.42.42.5(pid=30451): Launched
23:38:04.068227 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:38:04.651546 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30453): Launched
23:38:04.770003 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:38:05.071542 run              patchelf(pid=30454): Launched
23:38:05.263792 run   osmo-stp_10.42.42.5(pid=30451): ERR: Terminated: ERROR {rc=1}  [trial-2366↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30451)]
23:38:05.405851 run   osmo-stp_10.42.42.5(pid=30451): stdout: 
| (launched: 2022-12-09_23:38:03.582150)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:38:05.549298 run   osmo-stp_10.42.42.5(pid=30451): stderr: 
| �[0;m�[38;5;43m20221209233803878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209233803878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209233803879 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209233803879 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209233803881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209233803881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209233803881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:38:05.685896 run   osmo-stp_10.42.42.5(pid=30451): stdout: 
| (launched: 2022-12-09_23:38:03.582150)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:38:05.820768 run   osmo-stp_10.42.42.5(pid=30451): stderr: 
| �[0;m�[38;5;43m20221209233803878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209233803878 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209233803879 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209233803879 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209233803881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209233803881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209233803881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:38:05.977059 run              patchelf(pid=30454): Terminating (SIGINT)
23:38:06.161646 run              patchelf(pid=30454): Terminated: ok {rc=0}
23:38:06.195728 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=30451): Process ended prematurely: osmo-stp_10.42.42.5(pid=30451) [trial-2366↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30451)]  [trial-2366↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
23:38:06.206753 tst                      iperf3.py:8: Test FAILED (8.1 sec)
23:38:06.275169 run   osmo-hlr_10.42.42.2(pid=30447): ERR: Terminated: ERROR {rc=237}  [trial-2366↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30447)]
23:38:06.329614 run   osmo-hlr_10.42.42.2(pid=30447): stdout: 
| (launched: 2022-12-09_23:38:02.375275) 
23:38:06.386389 run   osmo-hlr_10.42.42.2(pid=30447): stderr: 
| �[0;m�[1;31m20221209233802569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209233802570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209233802570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209233802570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209233802570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209233802570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209233802591 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209233802599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209233802599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209233802599 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:38:06.433593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30432): Terminating (SIGTERM)
23:38:06.480431 run iperf3-srv_10.42.42.10(pid=30433): Terminating (SIGTERM)
23:38:06.527127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30437): Terminating (SIGTERM)
23:38:06.573293 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30450): Terminating (SIGTERM)
23:38:06.617223 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30453): Terminating (SIGTERM)
23:38:06.630424 ---      ParallelTerminationStrategy: PID 30432 died...
23:38:06.691722 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30432): Terminated: ok {rc=0}
23:38:06.702774 ---      ParallelTerminationStrategy: PID 30433 died...
23:38:06.762695 run iperf3-srv_10.42.42.10(pid=30433): Terminated {rc=256}
23:38:06.773748 ---      ParallelTerminationStrategy: PID 30437 died...
23:38:06.833298 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30437): Terminated: ok {rc=0}
23:38:06.844366 ---      ParallelTerminationStrategy: PID 30450 died...
23:38:06.903246 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30450): Terminated: ok {rc=0}
23:38:06.914274 ---      ParallelTerminationStrategy: PID 30453 died...
23:38:06.974111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30453): Terminated: ok {rc=0}
23:38:07.064431 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30451): Process ended prematurely: osmo-stp_10.42.42.5(pid=30451) [trial-2366↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30451)]