Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3993): Process ended prematurely: osmo-stp_10.42.42.5(pid=3993) [trial-2367↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3993)]
Standard Output
---------------------------------------------- trial-2367 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:46:51.751141 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:51.761914 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:46:51.895521 tst cs_paging_gprs_active.py: using LAC 24816 00:46:52.024388 tst cs_paging_gprs_active.py: using RAC 81 00:46:52.153857 tst cs_paging_gprs_active.py: using CellId 24816 00:46:52.284718 tst cs_paging_gprs_active.py: using BVCI 24817 00:46:52.310513 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:52.322003 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:52.333319 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:52.344436 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:52.355385 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:52.366397 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:52.378064 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:52.389086 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:46:52.400410 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:46:52.523350 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:46:52.807928 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:46:52.937827 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:46:53.263983 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3983): Launched 00:46:53.534690 run iperf3-srv_10.42.42.10(pid=3984): Launched 00:46:53.723624 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:46:53.853054 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:46:54.177528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3985): Launched 00:46:54.446156 run iperf3-srv_10.42.42.10(pid=3986): Launched 00:46:54.635489 tst cs_paging_gprs_active.py:38: start network... 00:46:54.764835 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:46:55.258346 run create_hlr_db(pid=3987): Launched 00:46:55.436612 bus /gobi_6: Setting Powered False 00:46:56.458898 run create_hlr_db(pid=3987): Terminated: ok {rc=0} 00:46:56.902465 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3989): Launched 00:46:57.237270 run osmo-hlr_10.42.42.2(pid=3990): Launched 00:46:57.359857 run osmo-stp_10.42.42.5: Starting osmo-stp 00:46:57.941602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3992): Launched 00:46:58.277341 run osmo-stp_10.42.42.5(pid=3993): Launched 00:46:58.398218 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:46:58.980546 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3995): Launched 00:46:59.100192 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:46:59.392738 run patchelf(pid=3996): Launched 00:46:59.586527 run osmo-stp_10.42.42.5(pid=3993): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3993)] 00:46:59.728306 run osmo-stp_10.42.42.5(pid=3993): stdout: | (launched: 2022-12-10_00:46:58.111026) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:46:59.869771 run osmo-stp_10.42.42.5(pid=3993): stderr: | �[0;m�[38;5;43m20221210004658304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004658304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004658305 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004658305 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004658305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004658306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004658306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:47:00.006496 run osmo-stp_10.42.42.5(pid=3993): stdout: | (launched: 2022-12-10_00:46:58.111026) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:47:00.142222 run osmo-stp_10.42.42.5(pid=3993): stderr: | �[0;m�[38;5;43m20221210004658304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004658304 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004658305 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004658305 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004658305 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004658306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004658306 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:47:00.299418 run patchelf(pid=3996): Terminating (SIGINT) 00:47:00.484251 run patchelf(pid=3996): Terminated: ok {rc=0} 00:47:00.518207 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3993): Process ended prematurely: osmo-stp_10.42.42.5(pid=3993) [trial-2367↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3993)] [trial-2367↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:47:00.528064 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:47:00.591813 run osmo-hlr_10.42.42.2(pid=3990): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3990)] 00:47:00.644012 run osmo-hlr_10.42.42.2(pid=3990): stdout: | (launched: 2022-12-10_00:46:57.071745) 00:47:00.696893 run osmo-hlr_10.42.42.2(pid=3990): stderr: | �[0;m�[1;31m20221210004657275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210004657275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210004657275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210004657275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210004657275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210004657275 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210004657289 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210004657298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210004657299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210004657299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:47:00.742019 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3983): Terminating (SIGTERM) 00:47:00.784354 run iperf3-srv_10.42.42.10(pid=3984): Terminating (SIGTERM) 00:47:00.834104 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3985): Terminating (SIGTERM) 00:47:00.911375 run iperf3-srv_10.42.42.10(pid=3986): Terminating (SIGTERM) 00:47:00.957105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3989): Terminating (SIGTERM) 00:47:01.000826 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3992): Terminating (SIGTERM) 00:47:01.064835 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3995): Terminating (SIGTERM) 00:47:01.075821 --- ParallelTerminationStrategy: PID 3983 died... 00:47:01.133947 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3983): Terminated: ok {rc=0} 00:47:01.144645 --- ParallelTerminationStrategy: PID 3984 died... 00:47:01.205093 run iperf3-srv_10.42.42.10(pid=3984): Terminated {rc=256} 00:47:01.215775 --- ParallelTerminationStrategy: PID 3985 died... 00:47:01.272449 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3985): Terminated: ok {rc=0} 00:47:01.282762 --- ParallelTerminationStrategy: PID 3986 died... 00:47:01.339689 run iperf3-srv_10.42.42.10(pid=3986): Terminated {rc=256} 00:47:01.351271 --- ParallelTerminationStrategy: PID 3989 died... 00:47:01.408289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3989): Terminated: ok {rc=0} 00:47:01.418734 --- ParallelTerminationStrategy: PID 3992 died... 00:47:01.475676 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3992): Terminated: ok {rc=0} 00:47:01.486217 --- ParallelTerminationStrategy: PID 3995 died... 00:47:01.543971 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3995): Terminated: ok {rc=0} 00:47:01.634443 bus /gobi_0: Setting Powered False 00:47:02.737382 bus /gobi_0: Setting Powered False 00:47:03.844634 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3993): Process ended prematurely: osmo-stp_10.42.42.5(pid=3993) [trial-2367↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3993)]