Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=8444): Process ended prematurely: osmo-stp_10.42.42.5(pid=8444) [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8444)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 01:23:29.594538 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:29.607568 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:23:29.763012 tst cs_paging_gprs_active.py: using LAC 25010 01:23:29.890721 tst cs_paging_gprs_active.py: using RAC 20 01:23:30.017251 tst cs_paging_gprs_active.py: using CellId 25010 01:23:30.144326 tst cs_paging_gprs_active.py: using BVCI 25011 01:23:30.170692 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:30.183586 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:30.196381 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:30.209599 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:30.222139 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:30.234724 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:30.249045 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:30.261930 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:23:30.274638 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:23:30.397689 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:23:30.704938 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:23:30.859417 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:23:31.246229 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8434): Launched 01:23:31.543324 run iperf3-srv_10.42.42.10(pid=8435): Launched 01:23:31.748573 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:23:31.887117 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:23:32.237831 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8436): Launched 01:23:32.565662 run iperf3-srv_10.42.42.10(pid=8437): Launched 01:23:32.785786 tst cs_paging_gprs_active.py:38: start network... 01:23:32.943399 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:23:33.522678 run create_hlr_db(pid=8438): Launched 01:23:33.717082 bus /gobi_6: Setting Powered False 01:23:34.739465 run create_hlr_db(pid=8438): Terminated: ok {rc=0} 01:23:35.191753 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8440): Launched 01:23:35.624063 run osmo-hlr_10.42.42.2(pid=8441): Launched 01:23:35.879617 run osmo-stp_10.42.42.5: Starting osmo-stp 01:23:36.468214 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8443): Launched 01:23:36.906587 run osmo-stp_10.42.42.5(pid=8444): Launched 01:23:37.124253 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:23:37.718149 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8446): Launched 01:23:37.837157 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:23:38.142023 run patchelf(pid=8447): Launched 01:23:38.336593 run osmo-stp_10.42.42.5(pid=8444): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8444)] 01:23:38.479669 run osmo-stp_10.42.42.5(pid=8444): stdout: | (launched: 2022-12-10_01:23:36.638809) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:38.623124 run osmo-stp_10.42.42.5(pid=8444): stderr: | �[0;m�[38;5;43m20221210012336935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210012336935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210012336936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210012336936 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210012336937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210012336937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210012336937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:38.762509 run osmo-stp_10.42.42.5(pid=8444): stdout: | (launched: 2022-12-10_01:23:36.638809) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:23:38.899188 run osmo-stp_10.42.42.5(pid=8444): stderr: | �[0;m�[38;5;43m20221210012336935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210012336935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210012336936 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210012336936 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210012336937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210012336937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210012336937 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:23:39.058681 run patchelf(pid=8447): Terminating (SIGINT) 01:23:39.243848 run patchelf(pid=8447): Terminated: ok {rc=0} 01:23:39.279551 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8444): Process ended prematurely: osmo-stp_10.42.42.5(pid=8444) [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8444)] [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 01:23:39.290766 tst cs_paging_gprs_active.py:38: Test FAILED (9.7 sec) 01:23:39.356073 run osmo-hlr_10.42.42.2(pid=8441): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8441)] 01:23:39.408870 run osmo-hlr_10.42.42.2(pid=8441): stdout: | (launched: 2022-12-10_01:23:35.361546) 01:23:39.464208 run osmo-hlr_10.42.42.2(pid=8441): stderr: | �[0;m�[1;31m20221210012335680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210012335680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210012335680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210012335680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210012335680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210012335680 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210012335695 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210012335703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210012335703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210012335703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:23:39.509772 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8434): Terminating (SIGTERM) 01:23:39.555126 run iperf3-srv_10.42.42.10(pid=8435): Terminating (SIGTERM) 01:23:39.601795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8436): Terminating (SIGTERM) 01:23:39.647082 run iperf3-srv_10.42.42.10(pid=8437): Terminating (SIGTERM) 01:23:39.694142 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8440): Terminating (SIGTERM) 01:23:39.738813 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8443): Terminating (SIGTERM) 01:23:39.783951 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8446): Terminating (SIGTERM) 01:23:39.794694 --- ParallelTerminationStrategy: PID 8434 died... 01:23:39.854336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8434): Terminated: ok {rc=0} 01:23:39.865336 --- ParallelTerminationStrategy: PID 8435 died... 01:23:39.922043 run iperf3-srv_10.42.42.10(pid=8435): Terminated {rc=256} 01:23:39.933461 --- ParallelTerminationStrategy: PID 8436 died... 01:23:39.991963 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8436): Terminated: ok {rc=0} 01:23:40.002770 --- ParallelTerminationStrategy: PID 8437 died... 01:23:40.060933 run iperf3-srv_10.42.42.10(pid=8437): Terminated {rc=256} 01:23:40.071752 --- ParallelTerminationStrategy: PID 8440 died... 01:23:40.128982 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8440): Terminated: ok {rc=0} 01:23:40.139784 --- ParallelTerminationStrategy: PID 8443 died... 01:23:40.198165 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8443): Terminated: ok {rc=0} 01:23:40.209499 --- ParallelTerminationStrategy: PID 8446 died... 01:23:40.267515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8446): Terminated: ok {rc=0} 01:23:40.357830 bus /gobi_0: Setting Powered False 01:23:41.459745 bus /gobi_0: Setting Powered False 01:23:42.565967 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8444): Process ended prematurely: osmo-stp_10.42.42.5(pid=8444) [trial-2367↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8444)]