Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 237 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15296): Process ended prematurely: osmo-stp_10.42.42.5(pid=15296) [trial-2375↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15296)]

Standard Output

----------------------------------------------
trial-2375 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
13:47:09.189580 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.201642 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
13:47:09.361302 tst                        iperf3.py: using LAC 28816
13:47:09.479814 tst                        iperf3.py: using RAC 1
13:47:09.599115 tst                        iperf3.py: using CellId 28816
13:47:09.714780 tst                        iperf3.py: using BVCI 28817
13:47:09.737808 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.748435 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.759304 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.769919 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.780272 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.790815 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.801545 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.811948 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
13:47:09.822691 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
13:47:10.094440 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
13:47:10.218354 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:47:10.525714 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15288): Launched
13:47:10.781652 run iperf3-srv_10.42.42.10(pid=15289): Launched
13:47:10.962600 tst                      iperf3.py:8: start network...
13:47:11.086324 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:47:11.561603 run         create_hlr_db(pid=15290): Launched
13:47:11.731477 bus                          /gobi_6: Setting Powered False
13:47:12.754060 run         create_hlr_db(pid=15290): Terminated: ok {rc=0}
13:47:13.175293 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15292): Launched
13:47:13.494151 run   osmo-hlr_10.42.42.2(pid=15293): Launched
13:47:13.613245 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:47:14.165619 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15295): Launched
13:47:14.484608 run   osmo-stp_10.42.42.5(pid=15296): Launched
13:47:14.603192 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:47:15.158808 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15298): Launched
13:47:15.272698 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:47:15.549652 run              patchelf(pid=15299): Launched
13:47:15.735807 run   osmo-stp_10.42.42.5(pid=15296): ERR: Terminated: ERROR {rc=1}  [trial-2375↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15296)]
13:47:15.886374 run   osmo-stp_10.42.42.5(pid=15296): stdout: 
| (launched: 2022-12-10_13:47:14.327672)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:47:16.018457 run   osmo-stp_10.42.42.5(pid=15296): stderr: 
| �[0;m�[38;5;43m20221210134714521 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210134714521 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210134714521 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210134714522 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210134714522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210134714522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210134714522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:47:16.146221 run   osmo-stp_10.42.42.5(pid=15296): stdout: 
| (launched: 2022-12-10_13:47:14.327672)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:47:16.272815 run   osmo-stp_10.42.42.5(pid=15296): stderr: 
| �[0;m�[38;5;43m20221210134714521 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210134714521 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210134714521 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210134714522 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210134714522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210134714522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210134714522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:47:16.421279 run              patchelf(pid=15299): Terminating (SIGINT)
13:47:16.594193 run              patchelf(pid=15299): Terminated: ok {rc=0}
13:47:16.626616 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15296): Process ended prematurely: osmo-stp_10.42.42.5(pid=15296) [trial-2375↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15296)]  [trial-2375↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
13:47:16.636134 tst                      iperf3.py:8: Test FAILED (7.5 sec)
13:47:16.697369 run   osmo-hlr_10.42.42.2(pid=15293): ERR: Terminated: ERROR {rc=237}  [trial-2375↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15293)]
13:47:16.748517 run   osmo-hlr_10.42.42.2(pid=15293): stdout: 
| (launched: 2022-12-10_13:47:13.337286) 
13:47:16.798925 run   osmo-hlr_10.42.42.2(pid=15293): stderr: 
| �[0;m�[1;31m20221210134713535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210134713535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210134713535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210134713535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210134713535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210134713535 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210134713547 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210134713556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210134713556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210134713556 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:47:16.842211 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15288): Terminating (SIGTERM)
13:47:16.883250 run iperf3-srv_10.42.42.10(pid=15289): Terminating (SIGTERM)
13:47:16.924688 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15292): Terminating (SIGTERM)
13:47:16.966241 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15295): Terminating (SIGTERM)
13:47:17.010054 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15298): Terminating (SIGTERM)
13:47:17.020291 ---      ParallelTerminationStrategy: PID 15288 died...
13:47:17.076131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15288): Terminated: ok {rc=0}
13:47:17.086190 ---      ParallelTerminationStrategy: PID 15289 died...
13:47:17.140927 run iperf3-srv_10.42.42.10(pid=15289): Terminated {rc=256}
13:47:17.150889 ---      ParallelTerminationStrategy: PID 15292 died...
13:47:17.203947 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15292): Terminated: ok {rc=0}
13:47:17.214116 ---      ParallelTerminationStrategy: PID 15295 died...
13:47:17.266481 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15295): Terminated: ok {rc=0}
13:47:17.275918 ---      ParallelTerminationStrategy: PID 15298 died...
13:47:17.328197 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15298): Terminated: ok {rc=0}
13:47:17.416264 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15296): Process ended prematurely: osmo-stp_10.42.42.5(pid=15296) [trial-2375↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15296)]