Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 237 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=12020): Process ended prematurely: osmo-stp_10.42.42.5(pid=12020) [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12020)]

Standard Output

----------------------------------------------
trial-2375 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
13:08:34.120378 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.133730 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
13:08:34.298934 tst                        iperf3.py: using LAC 28608
13:08:34.435236 tst                        iperf3.py: using RAC 48
13:08:34.566742 tst                        iperf3.py: using CellId 28608
13:08:34.698412 tst                        iperf3.py: using BVCI 28609
13:08:34.724302 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.737235 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.749824 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.762221 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.774842 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.787956 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.801262 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.813996 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
13:08:34.827180 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
13:08:35.129851 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
13:08:35.269929 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:08:35.629528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12011): Launched
13:08:35.935695 run iperf3-srv_10.42.42.10(pid=12012): Launched
13:08:36.141884 tst                      iperf3.py:8: start network...
13:08:36.281132 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:08:36.852846 run         create_hlr_db(pid=12013): Launched
13:08:37.045475 bus                          /gobi_6: Setting Powered False
13:08:38.068104 run         create_hlr_db(pid=12013): Terminated: ok {rc=0}
13:08:38.527316 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12015): Launched
13:08:38.851618 run   osmo-hlr_10.42.42.2(pid=12016): Launched
13:08:38.969130 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:08:39.496213 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12019): Launched
13:08:39.795732 run   osmo-stp_10.42.42.5(pid=12020): Launched
13:08:39.905612 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:08:40.429488 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12022): Launched
13:08:40.536549 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:08:40.797704 run              patchelf(pid=12023): Launched
13:08:40.973123 run   osmo-stp_10.42.42.5(pid=12020): ERR: Terminated: ERROR {rc=1}  [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12020)]
13:08:41.101495 run   osmo-stp_10.42.42.5(pid=12020): stdout: 
| (launched: 2022-12-10_13:08:39.648317)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:08:41.230215 run   osmo-stp_10.42.42.5(pid=12020): stderr: 
| �[0;m�[38;5;43m20221210130839817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210130839817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210130839818 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210130839818 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210130839820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210130839820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210130839820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:08:41.354376 run   osmo-stp_10.42.42.5(pid=12020): stdout: 
| (launched: 2022-12-10_13:08:39.648317)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:08:41.477869 run   osmo-stp_10.42.42.5(pid=12020): stderr: 
| �[0;m�[38;5;43m20221210130839817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210130839817 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210130839818 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210130839818 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210130839820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210130839820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210130839820 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:08:41.621286 run              patchelf(pid=12023): Terminating (SIGINT)
13:08:41.790132 run              patchelf(pid=12023): Terminated: ok {rc=0}
13:08:41.821211 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=12020): Process ended prematurely: osmo-stp_10.42.42.5(pid=12020) [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12020)]  [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
13:08:41.830334 tst                      iperf3.py:8: Test FAILED (7.7 sec)
13:08:41.890075 run   osmo-hlr_10.42.42.2(pid=12016): ERR: Terminated: ERROR {rc=237}  [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12016)]
13:08:41.938981 run   osmo-hlr_10.42.42.2(pid=12016): stdout: 
| (launched: 2022-12-10_13:08:38.697245) 
13:08:41.988276 run   osmo-hlr_10.42.42.2(pid=12016): stderr: 
| �[0;m�[1;31m20221210130838879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210130838879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210130838879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210130838879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210130838879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210130838879 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210130838891 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2375/run.2022-12-10_12-42-03/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210130838900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210130838900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210130838900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:08:42.029952 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12011): Terminating (SIGTERM)
13:08:42.069331 run iperf3-srv_10.42.42.10(pid=12012): Terminating (SIGTERM)
13:08:42.109014 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12015): Terminating (SIGTERM)
13:08:42.148567 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12019): Terminating (SIGTERM)
13:08:42.188152 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12022): Terminating (SIGTERM)
13:08:42.197531 ---      ParallelTerminationStrategy: PID 12011 died...
13:08:42.250425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12011): Terminated: ok {rc=0}
13:08:42.260048 ---      ParallelTerminationStrategy: PID 12012 died...
13:08:42.312129 run iperf3-srv_10.42.42.10(pid=12012): Terminated {rc=256}
13:08:42.321859 ---      ParallelTerminationStrategy: PID 12015 died...
13:08:42.374397 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12015): Terminated: ok {rc=0}
13:08:42.383866 ---      ParallelTerminationStrategy: PID 12019 died...
13:08:42.436002 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12019): Terminated: ok {rc=0}
13:08:42.445757 ---      ParallelTerminationStrategy: PID 12022 died...
13:08:42.498853 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12022): Terminated: ok {rc=0}
13:08:42.585390 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12020): Process ended prematurely: osmo-stp_10.42.42.5(pid=12020) [trial-2375↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12020)]