#2763 (Jan 13, 2022, 4:32:00 AM)

1. osmo-sgsn: Fix template cfg to work with NS2 implementation (details)
2. Fix bts.ready_for_pcu() implementation for sysmo and oc2g (details)
3. contrib: Add build script for open5gs (details)
4. enb,epc,ms: refactor KPI API (details)
5. enb.py: increase zmq trx timeout to 4000ms (details)
6. {enb,ms}-label.conf: raneme and add modifier to select eNB/MS based on (details)
7. srsenb_drb.conf.tmpl: set PDCP discard timer to 150ms for QCI9 (details)
8. amarisoft_drb.cfg.tmpl: add additional QCI10 with infinit PDCP discard (details)
9. srsenb_drb.conf.tmpl: add QCI10 with infinit PDCP discard timer (details)
10. ms_srs: add config scheme to select NAS log level (details)
11. srsue.conf.tmpl: Adjust ue.config template for new pcap path (details)
12. srsenb_sib.conf.tmpl: reduce the default size of the PUCCH (details)
13. jenkins-build-amarisoft: copy ltesim_server binary into epc trial tgz (details)
14. osmo-gsm-tester_androidue_conn_chk.sh: improve error handling (details)
15. ms_android: set num_carriers to 1 by default (details)
16. epc-label@.conf: add scenario to select runnode based on label (details)
17. run_node: add label to RunNode class (details)
18. mod-enb-ncells@.conf: add scenario file to select number of cells (details)
19. ms_srs: turn tx/rx_gain into INT and make them optional (details)
20. AndroidUE: Fix connection timeout (details)
21. iperf3_bidir: add extra test for bi-directional iperf test (details)
22. ms_srs: add force_ul_amplitude config (details)
23. enb.py: increase ZMQ trx timeout to 8s (details)
24. srslte_common: fix condition to check if KPI have already extracted (details)
25. sysmo/defaults.conf: Fix attribute name (details)
26. sysmocom/default.conf: Add missing default value for force_ul_amplitude (details)
27. contrib: open5gs: Install more binaries to have an EPC (details)
28. Initial Open5GS support (details)
29. open5gs: Avoid use of non-standard ports (details)
30. amarisoft_mme: use/expose count paramter from MS config for MME (details)
31. epc_amarisoft: launch ltesim server when starting (details)
32. ms_srs: add resource scheme to configure fixed DL and UL freq (details)
33. enb_srs: add support for eNB traces (details)
34. ms_amarisoft: extend AmariUE to support custom frequency bands (details)
35. ping.py: add stricter pass/fail check (details)
36. schema: add 5G as UE feature (details)
37. jenkins-build-amarisoft: adjusting lib name to srsran and update (details)
38. amarisoft_ltemme.cfg.tmpl: add gbr to the template (details)
39. rfemu_srsenb_stdin: catch exception in rfemu and log error (details)
40. srsenb_drb.conf.tmpl: decrease pollPDU for QCI9 (details)
41. enb: add rx_ant param (details)
42. 4g: add overlay template path for all suites (details)
43. ping: add a short delay after UE is attached before starting ping (details)
44. ms_srs: extend prach_sent counter with NR version (details)
45. srsue.conf.tmpl: update args for 21.04 changes to include NSA (details)
46. enb_amarisoft: add "sdr" as rf_dev_type and rx_ant parameter (details)
47. ms_srs: add short_sn as config option for srsUE (details)
48. amarisoft_rf_driver.cfg.tmpl: only set trx offset for B210 (details)
49. srsue.conf.tmpl: set srate param with the X310 (details)
50. srsenb.conf.tmpl: use LTE sample rates when Lime is found in rf args (details)
51. amarisoft_enb: add NR support (details)
52. ms_srs: add 5G NSA support (details)
53. amarisoft_ltemme.cfg.tmpl: enable ENDC support in config template (details)
54. amarisoftue: solve conflict of sample rate param in rf_driver (details)
55. srsue.conf.tmpl: tidy up config file (details)
56. epc_open5gs: remove _epc from name (details)
57. open5gs: fix stopping of open5gs components after test finishes (details)
58. androidue: fix execute permissions for conn_chk and diag parser scripts (details)
59. open5gs: fix name (details)
60. open5gs: lower default log level to info (details)
61. srsenb: enable S1AP pcaps as well when PCAPs are configured (details)
62. open5gs_mme: set short network name (details)
63. sysmocom/defaults.conf: Fix recently changed node name (details)
64. open5gs: Pre-configure tun device for UPF (details)
65. open5gs: Fix GTP-U addr binding (details)
66. iperf: adds the option to define the packet length for udp. (details)
67. 4g-iperf3-ul: modified the test to parameterize the number of ue in the (details)
68. 4g-iperf3-dl: modified the test to parameterize the number of ue in the (details)
69. 4g-iperf3-bidir: modified the test to parameterize the number of ue in (details)
70. srs-ms: allows to run given scripts before the execution of the UE. (details)
71. srs-enb: runs the given list of scripts before and after launching the (details)
72. srs-enb: adds fapi to the rf supported devices. (details)
73. srs-enb: sets the remote directory to the given one. (details)
74. srs-enb: adds support to the malloc interceptor. (details)
75. jenkins-build-common: adds support to the new variables for patchelf. (details)
76. util: fix the functions "create_netns" and "setcap_netsys_admin". (details)
77. ttcn3: Use osmocom registry to pull ttcn3-bts-test (details)
78. contrib: Convert trial osmo-iuh->osmo-hnbgw (details)

1. osmo-gsm-tester_build-osmo-bts-oc2g  ? → (detail)
2. osmo-gsm-tester_build-osmo-mgw  ? → (detail)
3. osmo-gsm-tester_build-osmo-pcu-oc2g  ? → (detail)
4. osmo-gsm-tester_build-osmo-trx  ? → (detail)
5. osmo-gsm-tester_build-osmocom-bb  ? → (detail)
6. osmo-gsm-tester_build-osmo-sgsn  ? → (detail)
7. osmo-gsm-tester_build-osmo-stp  ? → (detail)
8. osmo-gsm-tester_build-osmo-bts  ? → (detail)
9. osmo-gsm-tester_build-osmo-nitb  ? → (detail)
10. osmo-gsm-tester_build-osmo-bts-sysmo  ? → (detail)
11. osmo-gsm-tester_build-osmo-pcu  ? → (detail)
12. osmo-gsm-tester_build-osmo-hlr  ? → (detail)
13. osmo-gsm-tester_build-osmo-pcu-sysmo  ? → (detail)
14. osmo-gsm-tester_build-osmo-bsc  ? → (detail)
15. osmo-gsm-tester_build-osmo-ggsn  ? → (detail)
16. osmo-gsm-tester_build-osmo-msc  ? → (detail)

Started by timer

• refs/remotes/origin/master