Skip to content

Console Output

Skipping 759 KB.. Full Log
07:00:27.784585 mtc Message with id 22 was extracted from the queue of BSCVTY.
07:00:27.784610 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 23
07:00:27.784621 mtc Message with id 23 was extracted from the queue of BSCVTY.
07:00:27.784630 mtc Stop timer T: 2 s
07:00:27.784646 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:00:27.784671 mtc Start timer T: 2 s
07:00:27.784830 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 24
07:00:27.784887 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 24
07:00:27.784910 mtc Message with id 24 was extracted from the queue of BSCVTY.
07:00:27.784922 mtc Stop timer T: 2 s
07:00:27.784932 mtc Start timer T: 1 s
07:00:28.785018 mtc Timeout T: 1 s
07:00:28.785169 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:28.785287 mtc Start timer T: 2 s
07:00:28.785658 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 25
07:00:28.785977 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 25
07:00:28.786050 mtc Message with id 25 was extracted from the queue of BSCVTY.
07:00:28.786137 mtc Stop timer T: 2 s
07:00:28.786203 mtc Sent on BSCVTY to system charstring : "network"
07:00:28.786428 mtc Start timer T: 2 s
07:00:28.786563 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 26
07:00:28.786854 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 26
07:00:28.786917 mtc Message with id 26 was extracted from the queue of BSCVTY.
07:00:28.786977 mtc Stop timer T: 2 s
07:00:28.787039 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:28.787135 mtc Start timer T: 2 s
07:00:28.787397 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 27
07:00:28.787628 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 27
07:00:28.787688 mtc Message with id 27 was extracted from the queue of BSCVTY.
07:00:28.787751 mtc Stop timer T: 2 s
07:00:28.787816 mtc Sent on BSCVTY to system charstring : "system-information 2bis mode computed"
07:00:28.787911 mtc Start timer T: 2 s
07:00:28.788159 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 28
07:00:28.788384 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 28
07:00:28.788445 mtc Message with id 28 was extracted from the queue of BSCVTY.
07:00:28.788506 mtc Stop timer T: 2 s
07:00:28.788562 mtc Sent on BSCVTY to system charstring : "end"
07:00:28.788661 mtc Start timer T: 2 s
07:00:28.788875 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 29
07:00:28.789010 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 29
07:00:28.789064 mtc Message with id 29 was extracted from the queue of BSCVTY.
07:00:28.789112 mtc Stop timer T: 2 s
07:00:28.789173 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:28.789264 mtc Start timer T: 2 s
07:00:28.789491 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 30
07:00:28.789678 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 30
07:00:28.789724 mtc Message with id 30 was extracted from the queue of BSCVTY.
07:00:28.789782 mtc Stop timer T: 2 s
07:00:28.789836 mtc Sent on BSCVTY to system charstring : "network"
07:00:28.789936 mtc Start timer T: 2 s
07:00:28.790130 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 31
07:00:28.790399 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 31
07:00:28.790467 mtc Message with id 31 was extracted from the queue of BSCVTY.
07:00:28.790534 mtc Stop timer T: 2 s
07:00:28.790603 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:28.790727 mtc Start timer T: 2 s
07:00:28.790891 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 32
07:00:28.790951 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 32
07:00:28.790969 mtc Message with id 32 was extracted from the queue of BSCVTY.
07:00:28.790980 mtc Stop timer T: 2 s
07:00:28.790991 mtc Sent on BSCVTY to system charstring : "system-information 2ter mode computed"
07:00:28.791076 mtc Start timer T: 2 s
07:00:28.791106 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 33
07:00:28.791153 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 33
07:00:28.791166 mtc Message with id 33 was extracted from the queue of BSCVTY.
07:00:28.791174 mtc Stop timer T: 2 s
07:00:28.791183 mtc Sent on BSCVTY to system charstring : "end"
07:00:28.791202 mtc Start timer T: 2 s
07:00:28.791248 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 34
07:00:28.791272 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 34
07:00:28.791283 mtc Message with id 34 was extracted from the queue of BSCVTY.
07:00:28.791294 mtc Stop timer T: 2 s
07:00:28.791310 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:28.791335 mtc Start timer T: 2 s
07:00:28.791389 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 35
07:00:28.791435 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 35
07:00:28.791449 mtc Message with id 35 was extracted from the queue of BSCVTY.
07:00:28.791464 mtc Stop timer T: 2 s
07:00:28.791478 mtc Sent on BSCVTY to system charstring : "network"
07:00:28.791500 mtc Start timer T: 2 s
07:00:28.791547 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 36
07:00:28.791638 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 36
07:00:28.791654 mtc Message with id 36 was extracted from the queue of BSCVTY.
07:00:28.791672 mtc Stop timer T: 2 s
07:00:28.791712 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:28.791737 mtc Start timer T: 2 s
07:00:28.791780 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 37
07:00:28.791838 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 37
07:00:28.791849 mtc Message with id 37 was extracted from the queue of BSCVTY.
07:00:28.791858 mtc Stop timer T: 2 s
07:00:28.791878 mtc Sent on BSCVTY to system charstring : "gprs mode none"
07:00:28.791895 mtc Start timer T: 2 s
07:00:28.791952 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 38
07:00:28.792028 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 38
07:00:28.792047 mtc Message with id 38 was extracted from the queue of BSCVTY.
07:00:28.792063 mtc Stop timer T: 2 s
07:00:28.792079 mtc Sent on BSCVTY to system charstring : "end"
07:00:28.792105 mtc Start timer T: 2 s
07:00:28.792146 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 39
07:00:28.792177 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 39
07:00:28.792190 mtc Message with id 39 was extracted from the queue of BSCVTY.
07:00:28.792202 mtc Stop timer T: 2 s
07:00:28.792217 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:28.792238 mtc Start timer T: 2 s
07:00:28.792293 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 40
07:00:28.792346 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 40
07:00:28.792360 mtc Message with id 40 was extracted from the queue of BSCVTY.
07:00:28.792373 mtc Stop timer T: 2 s
07:00:28.792389 mtc Sent on BSCVTY to system charstring : "network"
07:00:28.792414 mtc Start timer T: 2 s
07:00:28.792459 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 41
07:00:28.792515 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 41
07:00:28.792530 mtc Message with id 41 was extracted from the queue of BSCVTY.
07:00:28.792544 mtc Stop timer T: 2 s
07:00:28.792562 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:28.792623 mtc Start timer T: 2 s
07:00:28.792661 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 42
07:00:28.792718 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 42
07:00:28.792736 mtc Message with id 42 was extracted from the queue of BSCVTY.
07:00:28.792753 mtc Stop timer T: 2 s
07:00:28.792773 mtc Sent on BSCVTY to system charstring : "si2quater neighbor-list del uarfcn 23 42"
07:00:28.792797 mtc Start timer T: 2 s
07:00:28.792868 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 43
07:00:28.792931 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 43
07:00:28.792942 mtc Message with id 43 was extracted from the queue of BSCVTY.
07:00:28.792951 mtc Stop timer T: 2 s
07:00:28.792961 mtc Sent on BSCVTY to system charstring : "end"
07:00:28.792977 mtc Start timer T: 2 s
07:00:28.793017 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 44
07:00:28.793052 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 44
07:00:28.793071 mtc Message with id 44 was extracted from the queue of BSCVTY.
07:00:28.793081 mtc Stop timer T: 2 s
07:00:28.793092 mtc Sent on BSCVTY to system charstring : "write terminal"
07:00:28.793116 mtc Start timer T: 2 s
07:00:28.793419 mtc Message enqueued on BSCVTY from system charstring : "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n  logging filter all 1\n  logging color 1\n  logging print category 0\n  logging timestamp 0\n  logging print file 1\n  logging level all everything\n  logging level rll notice\n  logging level cc notice\n  logging level mm debug\n  logging level rr notice\n  logging level rsl notice\n  logging level nm info\n  logging level mncc notice\n  logging level pag notice\n  logging level meas notice\n  logging level sccp notice\n  logging level msc notice\n  logging level mgcp notice\n  logging level ho notice\n  logging level db notice\n  logging level ref notice\n  logging level gprs debug\n  logging level ns info\n  logging level bssgp debug\n  logging level llc debug\n  logging level sndcp debug\n  logging level nat notice\n  logging level ctrl notice\n  logging level smpp debug\n  logging level filter debug\n  logging level ranap debug\n  logging level sua debug\n  logging level pcu debug\n  logging level lglobal notice\n  logging level llapd notice\n  logging level linp notice\n  logging level lmux notice\n  logging level lmi notice\n  logging level lmib notice\n  logging level lsms notice\n  logging level lctrl notice\n  logging level lgtp notice\n  logging level lstats notice\n  logging level lgsup notice\n  logging level loap notice\n  logging level lss7 notice\n  logging level lsccp notice\n  logging level lsua notice\n  logging level lm3ua notice\n  logging level lmgcp notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n  type sysmobts\n  band DCS1800\n  cell_identity 20960\n  location_area_code 13135\n  dtx uplink force\n  base_station_id_code 63\n  ms max power 40\n  cell reselection hysteresis 2\n  rxlev access min 45\n  periodic location update 6\n  radio-link-timeout 4\n  channel allocator ascending\n  rach tx integer 7\n  rach max transmission 4\n  channel-descrption attach 0\n  channel-descrption bs-pa-mfrms 3\n  channel-descrption bs-ag-blks-res 2\n  early-classmark-sending allowed\n  early-classmark-sending-3g allowed\n  ip.access unit_id 1234 0\n  oml ip.access stream_id 255 line 0\n  neighbor-list mode automatic\n  codec-support fr hr efr amr\n  amr tch-f modes 7\n  amr tch-f start-mode auto\n  gprs mode none\n  no force-combined-si\n  trx 0\n   rf_locked 0\n   arfcn 871\n   nominal power 23\n   max_power_red 20\n   rsl e1 tei 0\n   timeslot 0\n    phys_chan_config CCCH+SDCCH4\n    hopping enabled 0\n   timeslot 1\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 2\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 3\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 4\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 5\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 6\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 7\n    phys_chan_config PDCH\n    hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" id 45
07:00:28.793463 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 46
07:00:28.794829 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n  logging filter all 1\n  logging color 1\n  logging print category 0\n  logging timestamp 0\n  logging print file 1\n  logging level all everything\n  logging level rll notice\n  logging level cc notice\n  logging level mm debug\n  logging level rr notice\n  logging level rsl notice\n  logging level nm info\n  logging level mncc notice\n  logging level pag notice\n  logging level meas notice\n  logging level sccp notice\n  logging level msc notice\n  logging level mgcp notice\n  logging level ho notice\n  logging level db notice\n  logging level ref notice\n  logging level gprs debug\n  logging level ns info\n  logging level bssgp debug\n  logging level llc debug\n  logging level sndcp debug\n  logging level nat notice\n  logging level ctrl notice\n  logging level smpp debug\n  logging level filter debug\n  logging level ranap debug\n  logging level sua debug\n  logging level pcu debug\n  logging level lglobal notice\n  logging level llapd notice\n  logging level linp notice\n  logging level lmux notice\n  logging level lmi notice\n  logging level lmib notice\n  logging level lsms notice\n  logging level lctrl notice\n  logging level lgtp notice\n  logging level lstats notice\n  logging level lgsup notice\n  logging level loap notice\n  logging level lss7 notice\n  logging level lsccp notice\n  logging level lsua notice\n  logging level lm3ua notice\n  logging level lmgcp notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n  type sysmobts\n  band DCS1800\n  cell_identity 20960\n  location_area_code 13135\n  dtx uplink force\n  base_station_id_code 63\n  ms max power 40\n  cell reselection hysteresis 2\n  rxlev access min 45\n  periodic location update 6\n  radio-link-timeout 4\n  channel allocator ascending\n  rach tx integer 7\n  rach max transmission 4\n  channel-descrption attach 0\n  channel-descrption bs-pa-mfrms 3\n  channel-descrption bs-ag-blks-res 2\n  early-classmark-sending allowed\n  early-classmark-sending-3g allowed\n  ip.access unit_id 1234 0\n  oml ip.access stream_id 255 line 0\n  neighbor-list mode automatic\n  codec-support fr hr efr amr\n  amr tch-f modes 7\n  amr tch-f start-mode auto\n  gprs mode none\n  no force-combined-si\n  trx 0\n   rf_locked 0\n   arfcn 871\n   nominal power 23\n   max_power_red 20\n   rsl e1 tei 0\n   timeslot 0\n    phys_chan_config CCCH+SDCCH4\n    hopping enabled 0\n   timeslot 1\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 2\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 3\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 4\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 5\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 6\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 7\n    phys_chan_config PDCH\n    hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" id 45
07:00:28.794872 mtc Message with id 45 was extracted from the queue of BSCVTY.
07:00:28.794891 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 46
07:00:28.794900 mtc Message with id 46 was extracted from the queue of BSCVTY.
07:00:28.794906 mtc Stop timer T: 2 s
07:00:28.794919 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:00:28.794939 mtc Start timer T: 2 s
07:00:28.795084 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 47
07:00:28.795140 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 47
07:00:28.795159 mtc Message with id 47 was extracted from the queue of BSCVTY.
07:00:28.795174 mtc Stop timer T: 2 s
07:00:28.795189 mtc Start timer T: 1 s
07:00:29.795404 mtc Timeout T: 1 s
07:00:29.795563 mtc setverdict(pass): none -> pass
07:00:29.795613 mtc Terminating component type Test.dummy_CT.
07:00:29.795654 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:00:29.795743 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:00:29.795793 mtc Port GSMTAP was stopped.
07:00:29.795829 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:00:29.795962 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:00:29.796035 mtc Port BSCVTY was stopped.
07:00:29.796093 mtc Component type Test.dummy_CT was shut down inside testcase TC_si_sched_2quater.
07:00:29.796187 mtc Waiting for PTCs to finish.
07:00:29.796347 mtc Setting final verdict of the test case.
07:00:29.796418 mtc Local verdict of MTC: pass
07:00:29.796479 mtc No PTCs were created.
07:00:29.796537 mtc Test case TC_si_sched_2quater finished. Verdict: pass
07:00:29.796748 mtc Executing test case TC_si_sched_13 in module Test.
07:00:29.796879 mtc Test case TC_si_sched_13 started.
07:00:29.796946 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_si_sched_13.
07:00:29.797072 mtc Port GSMTAP was started.
07:00:29.797147 mtc Port BSCVTY was started.
07:00:29.797179 mtc Component type Test.dummy_CT was initialized.
07:00:29.797214 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:00:29.797451 mtc Port GSMTAP was mapped to system:GSMTAP.
07:00:29.797631 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:00:29.797731 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:00:29.797892 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:00:29.798464 mtc Port BSCVTY was mapped to system:BSCVTY.
07:00:29.798632 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:00:29.798745 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:00:29.798840 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:00:29.798898 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:00:29.798965 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:00:29.799013 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:00:29.799074 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:00:29.799224 mtc Sent on BSCVTY to system charstring : "enable"
07:00:29.799346 mtc Start timer T: 2 s
07:00:29.799539 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:00:29.799666 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:00:29.799729 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:00:29.799778 mtc Stop timer T: 2 s
07:00:29.799838 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:29.799929 mtc Start timer T: 2 s
07:00:29.800295 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:00:29.800608 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:00:29.800675 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:00:29.800742 mtc Stop timer T: 2 s
07:00:29.800832 mtc Sent on BSCVTY to system charstring : "network"
07:00:29.800951 mtc Start timer T: 2 s
07:00:29.801164 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:00:29.801436 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:00:29.801506 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:00:29.801579 mtc Stop timer T: 2 s
07:00:29.801647 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:29.801753 mtc Start timer T: 2 s
07:00:29.801921 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:00:29.802013 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:00:29.802036 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:00:29.802059 mtc Stop timer T: 2 s
07:00:29.802083 mtc Sent on BSCVTY to system charstring : "system-information 2bis mode computed"
07:00:29.802117 mtc Start timer T: 2 s
07:00:29.802241 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:00:29.802311 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:00:29.802328 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:00:29.802344 mtc Stop timer T: 2 s
07:00:29.802360 mtc Sent on BSCVTY to system charstring : "end"
07:00:29.802385 mtc Start timer T: 2 s
07:00:29.802452 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:00:29.802490 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:00:29.802504 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:00:29.802517 mtc Stop timer T: 2 s
07:00:29.802538 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:29.802570 mtc Start timer T: 2 s
07:00:29.802650 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 7
07:00:29.802735 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 7
07:00:29.802751 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:00:29.802767 mtc Stop timer T: 2 s
07:00:29.802783 mtc Sent on BSCVTY to system charstring : "network"
07:00:29.802858 mtc Start timer T: 2 s
07:00:29.802902 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 8
07:00:29.802981 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 8
07:00:29.803002 mtc Message with id 8 was extracted from the queue of BSCVTY.
07:00:29.803025 mtc Stop timer T: 2 s
07:00:29.803046 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:29.803079 mtc Start timer T: 2 s
07:00:29.803149 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 9
07:00:29.803236 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 9
07:00:29.803258 mtc Message with id 9 was extracted from the queue of BSCVTY.
07:00:29.803281 mtc Stop timer T: 2 s
07:00:29.803305 mtc Sent on BSCVTY to system charstring : "system-information 2ter mode computed"
07:00:29.803337 mtc Start timer T: 2 s
07:00:29.803430 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 10
07:00:29.803514 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 10
07:00:29.803536 mtc Message with id 10 was extracted from the queue of BSCVTY.
07:00:29.803559 mtc Stop timer T: 2 s
07:00:29.803580 mtc Sent on BSCVTY to system charstring : "end"
07:00:29.803613 mtc Start timer T: 2 s
07:00:29.803678 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 11
07:00:29.803727 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 11
07:00:29.803748 mtc Message with id 11 was extracted from the queue of BSCVTY.
07:00:29.803765 mtc Stop timer T: 2 s
07:00:29.803788 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:29.803820 mtc Start timer T: 2 s
07:00:29.803911 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 12
07:00:29.804018 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 12
07:00:29.804045 mtc Message with id 12 was extracted from the queue of BSCVTY.
07:00:29.804073 mtc Stop timer T: 2 s
07:00:29.804097 mtc Sent on BSCVTY to system charstring : "network"
07:00:29.804135 mtc Start timer T: 2 s
07:00:29.804210 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 13
07:00:29.804310 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 13
07:00:29.804335 mtc Message with id 13 was extracted from the queue of BSCVTY.
07:00:29.804361 mtc Stop timer T: 2 s
07:00:29.804386 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:29.804469 mtc Start timer T: 2 s
07:00:29.804521 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 14
07:00:29.804615 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 14
07:00:29.804641 mtc Message with id 14 was extracted from the queue of BSCVTY.
07:00:29.804667 mtc Stop timer T: 2 s
07:00:29.804692 mtc Sent on BSCVTY to system charstring : "gprs mode gprs"
07:00:29.804731 mtc Start timer T: 2 s
07:00:29.804860 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 15
07:00:29.804981 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 15
07:00:29.805011 mtc Message with id 15 was extracted from the queue of BSCVTY.
07:00:29.805042 mtc Stop timer T: 2 s
07:00:29.805068 mtc Sent on BSCVTY to system charstring : "end"
07:00:29.805109 mtc Start timer T: 2 s
07:00:29.805191 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 16
07:00:29.805239 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 16
07:00:29.805263 mtc Message with id 16 was extracted from the queue of BSCVTY.
07:00:29.805284 mtc Stop timer T: 2 s
07:00:29.805307 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:29.805344 mtc Start timer T: 2 s
07:00:29.805447 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 17
07:00:29.805564 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 17
07:00:29.805593 mtc Message with id 17 was extracted from the queue of BSCVTY.
07:00:29.805620 mtc Stop timer T: 2 s
07:00:29.805649 mtc Sent on BSCVTY to system charstring : "network"
07:00:29.805738 mtc Start timer T: 2 s
07:00:29.805793 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 18
07:00:29.805893 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 18
07:00:29.805920 mtc Message with id 18 was extracted from the queue of BSCVTY.
07:00:29.805947 mtc Stop timer T: 2 s
07:00:29.805973 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:29.806063 mtc Start timer T: 2 s
07:00:29.806118 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 19
07:00:29.806217 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 19
07:00:29.806244 mtc Message with id 19 was extracted from the queue of BSCVTY.
07:00:29.806272 mtc Stop timer T: 2 s
07:00:29.806305 mtc Sent on BSCVTY to system charstring : "si2quater neighbor-list del uarfcn 23 42"
07:00:29.806343 mtc Start timer T: 2 s
07:00:29.806480 mtc Message enqueued on BSCVTY from system charstring : "Unable to delete uarfcn: pair not found" id 20
07:00:29.806527 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 21
07:00:29.806798 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "Unable to delete uarfcn: pair not found" id 20
07:00:29.806852 mtc Message with id 20 was extracted from the queue of BSCVTY.
07:00:29.806969 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 21
07:00:29.806990 mtc Message with id 21 was extracted from the queue of BSCVTY.
07:00:29.807010 mtc Stop timer T: 2 s
07:00:29.807028 mtc Sent on BSCVTY to system charstring : "end"
07:00:29.807065 mtc Start timer T: 2 s
07:00:29.807136 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 22
07:00:29.807204 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 22
07:00:29.807232 mtc Message with id 22 was extracted from the queue of BSCVTY.
07:00:29.807252 mtc Stop timer T: 2 s
07:00:29.807275 mtc Sent on BSCVTY to system charstring : "write terminal"
07:00:29.807315 mtc Start timer T: 2 s
07:00:29.808024 mtc Message enqueued on BSCVTY from system charstring : "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n  logging filter all 1\n  logging color 1\n  logging print category 0\n  logging timestamp 0\n  logging print file 1\n  logging level all everything\n  logging level rll notice\n  logging level cc notice\n  logging level mm debug\n  logging level rr notice\n  logging level rsl notice\n  logging level nm info\n  logging level mncc notice\n  logging level pag notice\n  logging level meas notice\n  logging level sccp notice\n  logging level msc notice\n  logging level mgcp notice\n  logging level ho notice\n  logging level db notice\n  logging level ref notice\n  logging level gprs debug\n  logging level ns info\n  logging level bssgp debug\n  logging level llc debug\n  logging level sndcp debug\n  logging level nat notice\n  logging level ctrl notice\n  logging level smpp debug\n  logging level filter debug\n  logging level ranap debug\n  logging level sua debug\n  logging level pcu debug\n  logging level lglobal notice\n  logging level llapd notice\n  logging level linp notice\n  logging level lmux notice\n  logging level lmi notice\n  logging level lmib notice\n  logging level lsms notice\n  logging level lctrl notice\n  logging level lgtp notice\n  logging level lstats notice\n  logging level lgsup notice\n  logging level loap notice\n  logging level lss7 notice\n  logging level lsccp notice\n  logging level lsua notice\n  logging level lm3ua notice\n  logging level lmgcp notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n  type sysmobts\n  band DCS1800\n  cell_identity 20960\n  location_area_code 13135\n  dtx uplink force\n  base_station_id_code 63\n  ms max power 40\n  cell reselection hysteresis 2\n  rxlev access min 45\n  periodic location update 6\n  radio-link-timeout 4\n  channel allocator ascending\n  rach tx integer 7\n  rach max transmission 4\n  channel-descrption attach 0\n  channel-descrption bs-pa-mfrms 3\n  channel-descrption bs-ag-blks-res 2\n  early-classmark-sending allowed\n  early-classmark-sending-3g allowed\n  ip.access unit_id 1234 0\n  oml ip.access stream_id 255 line 0\n  neighbor-list mode automatic\n  codec-support fr hr efr amr\n  amr tch-f modes 7\n  amr tch-f start-mode auto\n  gprs mode gprs\n  gprs 11bit_rach_support_for_egprs 0\n  gprs routing area 0\n  gprs network-control-order nc0\n  gprs cell bvci 196\n  gprs cell timer blocking-timer 3\n  gprs cell timer blocking-retries 3\n  gprs cell timer unblocking-retries 3\n  gprs cell timer reset-timer 3\n  gprs cell timer reset-retries 3\n  gprs cell timer suspend-timer 10\n  gprs cell timer suspend-retries 3\n  gprs cell timer resume-timer 10\n  gprs cell timer resume-retries 3\n  gprs cell timer capability-update-timer 10\n  gprs cell timer capability-update-retries 3\n  gprs nsei 96\n  gprs ns timer tns-block 3\n  gprs ns timer tns-block-retries 3\n  gprs ns timer tns-reset 3\n  gprs ns timer tns-reset-retries 3\n  gprs ns timer tns-test 30\n  gprs ns timer tns-alive 3\n  gprs ns timer tns-alive-retries 10\n  gprs nsvc 0 nsvci 0\n  gprs nsvc 0 local udp port 21000\n  gprs nsvc 0 remote udp port 23000\n  gprs nsvc 0 remote ip 172.18.0.21\n  gprs nsvc 1 nsvci 0\n  gprs nsvc 1 local udp port 0\n  gprs nsvc 1 remote udp port 0\n  gprs nsvc 1 remote ip 0.0.0.0\n  no force-combined-si\n  trx 0\n   rf_locked 0\n   arfcn 871\n   nominal power 23\n   max_power_red 20\n   rsl e1 tei 0\n   timeslot 0\n    phys_chan_config CCCH+SDCCH4\n    hopping enabled 0\n   timeslot 1\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 2\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 3\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 4\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 5\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 6\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 7\n    phys_chan_config PDCH\n    hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" id 23
07:00:29.808121 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 24
07:00:29.811590 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n  logging filter all 1\n  logging color 1\n  logging print category 0\n  logging timestamp 0\n  logging print file 1\n  logging level all everything\n  logging level rll notice\n  logging level cc notice\n  logging level mm debug\n  logging level rr notice\n  logging level rsl notice\n  logging level nm info\n  logging level mncc notice\n  logging level pag notice\n  logging level meas notice\n  logging level sccp notice\n  logging level msc notice\n  logging level mgcp notice\n  logging level ho notice\n  logging level db notice\n  logging level ref notice\n  logging level gprs debug\n  logging level ns info\n  logging level bssgp debug\n  logging level llc debug\n  logging level sndcp debug\n  logging level nat notice\n  logging level ctrl notice\n  logging level smpp debug\n  logging level filter debug\n  logging level ranap debug\n  logging level sua debug\n  logging level pcu debug\n  logging level lglobal notice\n  logging level llapd notice\n  logging level linp notice\n  logging level lmux notice\n  logging level lmi notice\n  logging level lmib notice\n  logging level lsms notice\n  logging level lctrl notice\n  logging level lgtp notice\n  logging level lstats notice\n  logging level lgsup notice\n  logging level loap notice\n  logging level lss7 notice\n  logging level lsccp notice\n  logging level lsua notice\n  logging level lm3ua notice\n  logging level lmgcp notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n  type sysmobts\n  band DCS1800\n  cell_identity 20960\n  location_area_code 13135\n  dtx uplink force\n  base_station_id_code 63\n  ms max power 40\n  cell reselection hysteresis 2\n  rxlev access min 45\n  periodic location update 6\n  radio-link-timeout 4\n  channel allocator ascending\n  rach tx integer 7\n  rach max transmission 4\n  channel-descrption attach 0\n  channel-descrption bs-pa-mfrms 3\n  channel-descrption bs-ag-blks-res 2\n  early-classmark-sending allowed\n  early-classmark-sending-3g allowed\n  ip.access unit_id 1234 0\n  oml ip.access stream_id 255 line 0\n  neighbor-list mode automatic\n  codec-support fr hr efr amr\n  amr tch-f modes 7\n  amr tch-f start-mode auto\n  gprs mode gprs\n  gprs 11bit_rach_support_for_egprs 0\n  gprs routing area 0\n  gprs network-control-order nc0\n  gprs cell bvci 196\n  gprs cell timer blocking-timer 3\n  gprs cell timer blocking-retries 3\n  gprs cell timer unblocking-retries 3\n  gprs cell timer reset-timer 3\n  gprs cell timer reset-retries 3\n  gprs cell timer suspend-timer 10\n  gprs cell timer suspend-retries 3\n  gprs cell timer resume-timer 10\n  gprs cell timer resume-retries 3\n  gprs cell timer capability-update-timer 10\n  gprs cell timer capability-update-retries 3\n  gprs nsei 96\n  gprs ns timer tns-block 3\n  gprs ns timer tns-block-retries 3\n  gprs ns timer tns-reset 3\n  gprs ns timer tns-reset-retries 3\n  gprs ns timer tns-test 30\n  gprs ns timer tns-alive 3\n  gprs ns timer tns-alive-retries 10\n  gprs nsvc 0 nsvci 0\n  gprs nsvc 0 local udp port 21000\n  gprs nsvc 0 remote udp port 23000\n  gprs nsvc 0 remote ip 172.18.0.21\n  gprs nsvc 1 nsvci 0\n  gprs nsvc 1 local udp port 0\n  gprs nsvc 1 remote udp port 0\n  gprs nsvc 1 remote ip 0.0.0.0\n  no force-combined-si\n  trx 0\n   rf_locked 0\n   arfcn 871\n   nominal power 23\n   max_power_red 20\n   rsl e1 tei 0\n   timeslot 0\n    phys_chan_config CCCH+SDCCH4\n    hopping enabled 0\n   timeslot 1\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 2\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 3\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 4\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 5\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 6\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 7\n    phys_chan_config PDCH\n    hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" id 23
07:00:29.811676 mtc Message with id 23 was extracted from the queue of BSCVTY.
07:00:29.811710 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 24
07:00:29.811724 mtc Message with id 24 was extracted from the queue of BSCVTY.
07:00:29.811742 mtc Stop timer T: 2 s
07:00:29.811770 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:00:29.811814 mtc Start timer T: 2 s
07:00:29.812071 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 25
07:00:29.812132 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 25
07:00:29.812159 mtc Message with id 25 was extracted from the queue of BSCVTY.
07:00:29.812181 mtc Stop timer T: 2 s
07:00:29.812199 mtc Start timer T: 1 s
07:00:30.812309 mtc Timeout T: 1 s
07:00:30.812466 mtc Port GSMTAP was cleared.
07:00:30.812513 mtc Start timer T: 8 s
07:00:38.814712 mtc Timeout T: 8 s
07:00:38.814773 mtc "TC_si_sched_13": TC=0 has #of SI=0
07:00:38.814791 mtc "TC_si_sched_13": TC=1 has #of SI=0
07:00:38.814801 mtc "TC_si_sched_13": TC=2 has #of SI=0
07:00:38.814822 mtc "TC_si_sched_13": TC=3 has #of SI=0
07:00:38.814829 mtc "TC_si_sched_13": TC=4 has #of SI=0
07:00:38.814836 mtc "TC_si_sched_13": TC=5 has #of SI=0
07:00:38.814843 mtc "TC_si_sched_13": TC=6 has #of SI=0
07:00:38.814853 mtc "TC_si_sched_13": TC=7 has #of SI=0
07:00:38.814866 mtc setverdict(fail): none -> fail reason: "No SI messages for TC=0!", new component reason: "No SI messages for TC=0!"
07:00:38.814879 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:38.814887 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:38.814895 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:38.814909 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:38.814916 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:38.814923 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:38.814929 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:38.814937 mtc Fail: No SYSTEM_INFORMATION_TYPE_1 (25) in TC=0!
07:00:38.814960 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:38.814968 mtc Fail: No SYSTEM_INFORMATION_TYPE_2 (26) in TC=1!
07:00:38.814976 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:38.814985 mtc Fail: No SYSTEM_INFORMATION_TYPE_3 (27) in TC=2!
07:00:38.814995 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:38.815005 mtc Fail: No SYSTEM_INFORMATION_TYPE_3 (27) in TC=6!
07:00:38.815018 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:38.815036 mtc Fail: No SYSTEM_INFORMATION_TYPE_4 (28) in TC=3!
07:00:38.815053 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:38.815061 mtc Fail: No SYSTEM_INFORMATION_TYPE_4 (28) in TC=7!
07:00:38.815072 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:38.815085 mtc Error: Insufficient SI in array
07:00:38.815094 mtc Test.ttcn:162: Dynamic test case error: testcase.stop
07:00:38.815111 mtc setverdict(error): fail -> error
07:00:38.815123 mtc Performing error recovery.
07:00:38.815163 mtc Terminating component type Test.dummy_CT.
07:00:38.815181 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:00:38.815219 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:00:38.815236 mtc Port GSMTAP was stopped.
07:00:38.815247 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:00:38.815291 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:00:38.815305 mtc Port BSCVTY was stopped.
07:00:38.815311 mtc Component type Test.dummy_CT was shut down inside testcase TC_si_sched_13.
07:00:38.815321 mtc Waiting for PTCs to finish.
07:00:38.815396 mtc Setting final verdict of the test case.
07:00:38.815413 mtc Local verdict of MTC: error
07:00:38.815428 mtc No PTCs were created.
07:00:38.815439 mtc Test case TC_si_sched_13 finished. Verdict: error
07:00:38.815488 mtc Executing test case TC_si_sched_13_2bis_2ter_2quater in module Test.
07:00:38.815515 mtc Test case TC_si_sched_13_2bis_2ter_2quater started.
07:00:38.815528 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_si_sched_13_2bis_2ter_2quater.
07:00:38.815554 mtc Port GSMTAP was started.
07:00:38.815569 mtc Port BSCVTY was started.
07:00:38.815575 mtc Component type Test.dummy_CT was initialized.
07:00:38.815583 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:00:38.815630 mtc Port GSMTAP was mapped to system:GSMTAP.
07:00:38.815678 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:00:38.815704 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:00:38.815748 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:00:38.815901 mtc Port BSCVTY was mapped to system:BSCVTY.
07:00:38.815937 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:00:38.815956 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:00:38.815981 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:00:38.815996 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:00:38.816017 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:00:38.816030 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:00:38.816051 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:00:38.816097 mtc Sent on BSCVTY to system charstring : "enable"
07:00:38.816128 mtc Start timer T: 2 s
07:00:38.816190 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:00:38.816239 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:00:38.816252 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:00:38.816260 mtc Stop timer T: 2 s
07:00:38.816271 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:38.816290 mtc Start timer T: 2 s
07:00:38.816384 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:00:38.816450 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:00:38.816467 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:00:38.816484 mtc Stop timer T: 2 s
07:00:38.816500 mtc Sent on BSCVTY to system charstring : "network"
07:00:38.816526 mtc Start timer T: 2 s
07:00:38.816582 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:00:38.816646 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:00:38.816662 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:00:38.816678 mtc Stop timer T: 2 s
07:00:38.816695 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:38.816719 mtc Start timer T: 2 s
07:00:38.816778 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:00:38.816854 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:00:38.816871 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:00:38.816889 mtc Stop timer T: 2 s
07:00:38.816906 mtc Sent on BSCVTY to system charstring : "system-information 2bis mode static"
07:00:38.816931 mtc Start timer T: 2 s
07:00:38.817030 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:00:38.817096 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:00:38.817113 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:00:38.817129 mtc Stop timer T: 2 s
07:00:38.817147 mtc Sent on BSCVTY to system charstring : "system-information 2bis static 550602BFE809B3FF00000000000000000000007900002B"
07:00:38.817167 mtc Start timer T: 2 s
07:00:38.817258 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 6
07:00:38.817321 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 6
07:00:38.817339 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:00:38.817356 mtc Stop timer T: 2 s
07:00:38.817373 mtc Sent on BSCVTY to system charstring : "end"
07:00:38.817400 mtc Start timer T: 2 s
07:00:38.817450 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:00:38.817488 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:00:38.817502 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:00:38.817515 mtc Stop timer T: 2 s
07:00:38.817531 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:38.817556 mtc Start timer T: 2 s
07:00:38.817626 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 8
07:00:38.817692 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 8
07:00:38.817704 mtc Message with id 8 was extracted from the queue of BSCVTY.
07:00:38.817714 mtc Stop timer T: 2 s
07:00:38.817724 mtc Sent on BSCVTY to system charstring : "network"
07:00:38.817742 mtc Start timer T: 2 s
07:00:38.817810 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 9
07:00:38.817900 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 9
07:00:38.817922 mtc Message with id 9 was extracted from the queue of BSCVTY.
07:00:38.817941 mtc Stop timer T: 2 s
07:00:38.817958 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:38.817981 mtc Start timer T: 2 s
07:00:38.818046 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 10
07:00:38.818114 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 10
07:00:38.818137 mtc Message with id 10 was extracted from the queue of BSCVTY.
07:00:38.818156 mtc Stop timer T: 2 s
07:00:38.818176 mtc Sent on BSCVTY to system charstring : "system-information 2ter mode static"
07:00:38.818204 mtc Start timer T: 2 s
07:00:38.818278 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 11
07:00:38.818343 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 11
07:00:38.818361 mtc Message with id 11 was extracted from the queue of BSCVTY.
07:00:38.818379 mtc Stop timer T: 2 s
07:00:38.818403 mtc Sent on BSCVTY to system charstring : "system-information 2ter static 010603BF66B0AA0A00000002000000000000002B2B2B2B"
07:00:38.818429 mtc Start timer T: 2 s
07:00:38.818499 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 12
07:00:38.818552 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 12
07:00:38.818565 mtc Message with id 12 was extracted from the queue of BSCVTY.
07:00:38.818580 mtc Stop timer T: 2 s
07:00:38.818597 mtc Sent on BSCVTY to system charstring : "end"
07:00:38.818624 mtc Start timer T: 2 s
07:00:38.818686 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 13
07:00:38.818724 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 13
07:00:38.818740 mtc Message with id 13 was extracted from the queue of BSCVTY.
07:00:38.818754 mtc Stop timer T: 2 s
07:00:38.818771 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:38.818798 mtc Start timer T: 2 s
07:00:38.818859 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 14
07:00:38.818914 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 14
07:00:38.818931 mtc Message with id 14 was extracted from the queue of BSCVTY.
07:00:38.818949 mtc Stop timer T: 2 s
07:00:38.818965 mtc Sent on BSCVTY to system charstring : "network"
07:00:38.818992 mtc Start timer T: 2 s
07:00:38.819044 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 15
07:00:38.819109 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 15
07:00:38.819126 mtc Message with id 15 was extracted from the queue of BSCVTY.
07:00:38.819143 mtc Stop timer T: 2 s
07:00:38.819160 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:38.819187 mtc Start timer T: 2 s
07:00:38.819246 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 16
07:00:38.819308 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 16
07:00:38.819320 mtc Message with id 16 was extracted from the queue of BSCVTY.
07:00:38.819331 mtc Stop timer T: 2 s
07:00:38.819342 mtc Sent on BSCVTY to system charstring : "gprs mode gprs"
07:00:38.819361 mtc Start timer T: 2 s
07:00:38.819440 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 17
07:00:38.819532 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 17
07:00:38.819552 mtc Message with id 17 was extracted from the queue of BSCVTY.
07:00:38.819571 mtc Stop timer T: 2 s
07:00:38.819588 mtc Sent on BSCVTY to system charstring : "end"
07:00:38.819618 mtc Start timer T: 2 s
07:00:38.819673 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 18
07:00:38.819709 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 18
07:00:38.819720 mtc Message with id 18 was extracted from the queue of BSCVTY.
07:00:38.819728 mtc Stop timer T: 2 s
07:00:38.819744 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:38.819764 mtc Start timer T: 2 s
07:00:38.819850 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 19
07:00:38.819929 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 19
07:00:38.819943 mtc Message with id 19 was extracted from the queue of BSCVTY.
07:00:38.819954 mtc Stop timer T: 2 s
07:00:38.819970 mtc Sent on BSCVTY to system charstring : "network"
07:00:38.819990 mtc Start timer T: 2 s
07:00:38.820087 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 20
07:00:38.820155 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 20
07:00:38.820169 mtc Message with id 20 was extracted from the queue of BSCVTY.
07:00:38.820181 mtc Stop timer T: 2 s
07:00:38.820194 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:38.820217 mtc Start timer T: 2 s
07:00:38.820281 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 21
07:00:38.820362 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 21
07:00:38.820383 mtc Message with id 21 was extracted from the queue of BSCVTY.
07:00:38.820403 mtc Stop timer T: 2 s
07:00:38.820421 mtc Sent on BSCVTY to system charstring : "si2quater neighbor-list add uarfcn 23 42 0"
07:00:38.820442 mtc Start timer T: 2 s
07:00:38.820543 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 22
07:00:38.820704 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 22
07:00:38.820723 mtc Message with id 22 was extracted from the queue of BSCVTY.
07:00:38.820738 mtc Stop timer T: 2 s
07:00:38.820751 mtc Sent on BSCVTY to system charstring : "end"
07:00:38.820772 mtc Start timer T: 2 s
07:00:38.820823 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 23
07:00:38.820857 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 23
07:00:38.820868 mtc Message with id 23 was extracted from the queue of BSCVTY.
07:00:38.820876 mtc Stop timer T: 2 s
07:00:38.820885 mtc Sent on BSCVTY to system charstring : "write terminal"
07:00:38.820903 mtc Start timer T: 2 s
07:00:38.821390 mtc Message enqueued on BSCVTY from system charstring : "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n  logging filter all 1\n  logging color 1\n  logging print category 0\n  logging timestamp 0\n  logging print file 1\n  logging level all everything\n  logging level rll notice\n  logging level cc notice\n  logging level mm debug\n  logging level rr notice\n  logging level rsl notice\n  logging level nm info\n  logging level mncc notice\n  logging level pag notice\n  logging level meas notice\n  logging level sccp notice\n  logging level msc notice\n  logging level mgcp notice\n  logging level ho notice\n  logging level db notice\n  logging level ref notice\n  logging level gprs debug\n  logging level ns info\n  logging level bssgp debug\n  logging level llc debug\n  logging level sndcp debug\n  logging level nat notice\n  logging level ctrl notice\n  logging level smpp debug\n  logging level filter debug\n  logging level ranap debug\n  logging level sua debug\n  logging level pcu debug\n  logging level lglobal notice\n  logging level llapd notice\n  logging level linp notice\n  logging level lmux notice\n  logging level lmi notice\n  logging level lmib notice\n  logging level lsms notice\n  logging level lctrl notice\n  logging level lgtp notice\n  logging level lstats notice\n  logging level lgsup notice\n  logging level loap notice\n  logging level lss7 notice\n  logging level lsccp notice\n  logging level lsua notice\n  logging level lm3ua notice\n  logging level lmgcp notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n  type sysmobts\n  band DCS1800\n  cell_identity 20960\n  location_area_code 13135\n  dtx uplink force\n  base_station_id_code 63\n  ms max power 40\n  cell reselection hysteresis 2\n  rxlev access min 45\n  periodic location update 6\n  radio-link-timeout 4\n  channel allocator ascending\n  rach tx integer 7\n  rach max transmission 4\n  channel-descrption attach 0\n  channel-descrption bs-pa-mfrms 3\n  channel-descrption bs-ag-blks-res 2\n  system-information 2bis mode static\n  system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n  system-information 2ter mode static\n  system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n  early-classmark-sending allowed\n  early-classmark-sending-3g allowed\n  ip.access unit_id 1234 0\n  oml ip.access stream_id 255 line 0\n  neighbor-list mode automatic\n  si2quater neighbor-list add uarfcn 23 42 0\n  codec-support fr hr efr amr\n  amr tch-f modes 7\n  amr tch-f start-mode auto\n  gprs mode gprs\n  gprs 11bit_rach_support_for_egprs 0\n  gprs routing area 0\n  gprs network-control-order nc0\n  gprs cell bvci 196\n  gprs cell timer blocking-timer 3\n  gprs cell timer blocking-retries 3\n  gprs cell timer unblocking-retries 3\n  gprs cell timer reset-timer 3\n  gprs cell timer reset-retries 3\n  gprs cell timer suspend-timer 10\n  gprs cell timer suspend-retries 3\n  gprs cell timer resume-timer 10\n  gprs cell timer resume-retries 3\n  gprs cell timer capability-update-timer 10\n  gprs cell timer capability-update-retries 3\n  gprs nsei 96\n  gprs ns timer tns-block 3\n  gprs ns timer tns-block-retries 3\n  gprs ns timer tns-reset 3\n  gprs ns timer tns-reset-retries 3\n  gprs ns timer tns-test 30\n  gprs ns timer tns-alive 3\n  gprs ns timer tns-alive-retries 10\n  gprs nsvc 0 nsvci 0\n  gprs nsvc 0 local udp port 21000\n  gprs nsvc 0 remote udp port 23000\n  gprs nsvc 0 remote ip 172.18.0.21\n  gprs nsvc 1 nsvci 0\n  gprs nsvc 1 local udp port 0\n  gprs nsvc 1 remote udp port 0\n  gprs nsvc 1 remote ip 0.0.0.0\n  no force-combined-si\n  trx 0\n   rf_locked 0\n   arfcn 871\n   nominal power 23\n   max_power_red 20\n   rsl e1 tei 0\n   timeslot 0\n    phys_chan_config CCCH+SDCCH4\n    hopping enabled 0\n   timeslot 1\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 2\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 3\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 4\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 5\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 6\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 7\n    phys_chan_config PDCH\n    hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" id 24
07:00:38.821453 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 25
07:00:38.823832 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "\nCurrent configuration:\n!\npassword foo\n!\nlog stderr\n  logging filter all 1\n  logging color 1\n  logging print category 0\n  logging timestamp 0\n  logging print file 1\n  logging level all everything\n  logging level rll notice\n  logging level cc notice\n  logging level mm debug\n  logging level rr notice\n  logging level rsl notice\n  logging level nm info\n  logging level mncc notice\n  logging level pag notice\n  logging level meas notice\n  logging level sccp notice\n  logging level msc notice\n  logging level mgcp notice\n  logging level ho notice\n  logging level db notice\n  logging level ref notice\n  logging level gprs debug\n  logging level ns info\n  logging level bssgp debug\n  logging level llc debug\n  logging level sndcp debug\n  logging level nat notice\n  logging level ctrl notice\n  logging level smpp debug\n  logging level filter debug\n  logging level ranap debug\n  logging level sua debug\n  logging level pcu debug\n  logging level lglobal notice\n  logging level llapd notice\n  logging level linp notice\n  logging level lmux notice\n  logging level lmi notice\n  logging level lmib notice\n  logging level lsms notice\n  logging level lctrl notice\n  logging level lgtp notice\n  logging level lstats notice\n  logging level lgsup notice\n  logging level loap notice\n  logging level lss7 notice\n  logging level lsccp notice\n  logging level lsua notice\n  logging level lm3ua notice\n  logging level lmgcp notice\n!\nstats interval 5\n!\nline vty\n no login\n bind 0.0.0.0\n!\ne1_input\n e1_line 0 driver ipa\n e1_line 0 port 0\n no e1_line 0 keepalive\nnetwork\n network country code 262\n mobile network code 42\n short name Osmocom\n long name Osmocom\n auth policy closed\n authorized-regexp .*\n location updating reject cause 13\n encryption a5 0\n neci 0\n paging any use tch 0\n rrlp mode none\n mm info 1\n handover 0\n handover window rxlev averaging 10\n handover window rxqual averaging 1\n handover window rxlev neighbor averaging 10\n handover power budget interval 6\n handover power budget hysteresis 3\n handover maximum distance 9999\n timer t3103 4\n timer t3105 4\n timer t3107 4\n timer t3109 4\n timer t3111 4\n timer t3115 4\n timer t3117 4\n timer t3119 4\n timer t3122 4\n timer t3141 4\n dyn_ts_allow_tch_f 0\n subscriber-keep-in-ram 0\n bts 0\n  type sysmobts\n  band DCS1800\n  cell_identity 20960\n  location_area_code 13135\n  dtx uplink force\n  base_station_id_code 63\n  ms max power 40\n  cell reselection hysteresis 2\n  rxlev access min 45\n  periodic location update 6\n  radio-link-timeout 4\n  channel allocator ascending\n  rach tx integer 7\n  rach max transmission 4\n  channel-descrption attach 0\n  channel-descrption bs-pa-mfrms 3\n  channel-descrption bs-ag-blks-res 2\n  system-information 2bis mode static\n  system-information 2bis static 550602bfe809b3ff00000000000000000000007900002b\n  system-information 2ter mode static\n  system-information 2ter static 010603bf66b0aa0a00000002000000000000002b2b2b2b\n  early-classmark-sending allowed\n  early-classmark-sending-3g allowed\n  ip.access unit_id 1234 0\n  oml ip.access stream_id 255 line 0\n  neighbor-list mode automatic\n  si2quater neighbor-list add uarfcn 23 42 0\n  codec-support fr hr efr amr\n  amr tch-f modes 7\n  amr tch-f start-mode auto\n  gprs mode gprs\n  gprs 11bit_rach_support_for_egprs 0\n  gprs routing area 0\n  gprs network-control-order nc0\n  gprs cell bvci 196\n  gprs cell timer blocking-timer 3\n  gprs cell timer blocking-retries 3\n  gprs cell timer unblocking-retries 3\n  gprs cell timer reset-timer 3\n  gprs cell timer reset-retries 3\n  gprs cell timer suspend-timer 10\n  gprs cell timer suspend-retries 3\n  gprs cell timer resume-timer 10\n  gprs cell timer resume-retries 3\n  gprs cell timer capability-update-timer 10\n  gprs cell timer capability-update-retries 3\n  gprs nsei 96\n  gprs ns timer tns-block 3\n  gprs ns timer tns-block-retries 3\n  gprs ns timer tns-reset 3\n  gprs ns timer tns-reset-retries 3\n  gprs ns timer tns-test 30\n  gprs ns timer tns-alive 3\n  gprs ns timer tns-alive-retries 10\n  gprs nsvc 0 nsvci 0\n  gprs nsvc 0 local udp port 21000\n  gprs nsvc 0 remote udp port 23000\n  gprs nsvc 0 remote ip 172.18.0.21\n  gprs nsvc 1 nsvci 0\n  gprs nsvc 1 local udp port 0\n  gprs nsvc 1 remote udp port 0\n  gprs nsvc 1 remote ip 0.0.0.0\n  no force-combined-si\n  trx 0\n   rf_locked 0\n   arfcn 871\n   nominal power 23\n   max_power_red 20\n   rsl e1 tei 0\n   timeslot 0\n    phys_chan_config CCCH+SDCCH4\n    hopping enabled 0\n   timeslot 1\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 2\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 3\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 4\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 5\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 6\n    phys_chan_config TCH/H\n    hopping enabled 0\n   timeslot 7\n    phys_chan_config PDCH\n    hopping enabled 0\nmncc-int\n default-codec tch-f efr\n default-codec tch-h hr\nnitb\n subscriber-create-on-demand\n assign-tmsi\nsmpp\n local-tcp-port 2775\n policy closed\n no smpp-first\nend" id 24
07:00:38.823902 mtc Message with id 24 was extracted from the queue of BSCVTY.
07:00:38.823930 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 25
07:00:38.823947 mtc Message with id 25 was extracted from the queue of BSCVTY.
07:00:38.823960 mtc Stop timer T: 2 s
07:00:38.823984 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:00:38.824017 mtc Start timer T: 2 s
07:00:38.824213 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 26
07:00:38.824252 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 26
07:00:38.824268 mtc Message with id 26 was extracted from the queue of BSCVTY.
07:00:38.824282 mtc Stop timer T: 2 s
07:00:38.824294 mtc Start timer T: 1 s
07:00:39.824348 mtc Timeout T: 1 s
07:00:39.824413 mtc Port GSMTAP was cleared.
07:00:39.824427 mtc Start timer T: 8 s
07:00:47.830706 mtc Timeout T: 8 s
07:00:47.830760 mtc "TC_si_sched_13_2bis_2ter_2quater": TC=0 has #of SI=0
07:00:47.830779 mtc "TC_si_sched_13_2bis_2ter_2quater": TC=1 has #of SI=0
07:00:47.830803 mtc "TC_si_sched_13_2bis_2ter_2quater": TC=2 has #of SI=0
07:00:47.830811 mtc "TC_si_sched_13_2bis_2ter_2quater": TC=3 has #of SI=0
07:00:47.830818 mtc "TC_si_sched_13_2bis_2ter_2quater": TC=4 has #of SI=0
07:00:47.830825 mtc "TC_si_sched_13_2bis_2ter_2quater": TC=5 has #of SI=0
07:00:47.830832 mtc "TC_si_sched_13_2bis_2ter_2quater": TC=6 has #of SI=0
07:00:47.830856 mtc "TC_si_sched_13_2bis_2ter_2quater": TC=7 has #of SI=0
07:00:47.830871 mtc setverdict(fail): none -> fail reason: "No SI messages for TC=0!", new component reason: "No SI messages for TC=0!"
07:00:47.830902 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:47.830943 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:47.830954 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:47.830966 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:47.830977 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:47.831005 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:47.831029 mtc setverdict(fail): fail -> fail reason: "No SI messages for TC=0!", component reason not changed
07:00:47.831057 mtc Fail: No SYSTEM_INFORMATION_TYPE_1 (25) in TC=0!
07:00:47.831098 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:47.831111 mtc Fail: No SYSTEM_INFORMATION_TYPE_2 (26) in TC=1!
07:00:47.831123 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:47.831134 mtc Fail: No SYSTEM_INFORMATION_TYPE_3 (27) in TC=2!
07:00:47.831147 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:47.831158 mtc Fail: No SYSTEM_INFORMATION_TYPE_3 (27) in TC=6!
07:00:47.831170 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:47.831194 mtc Fail: No SYSTEM_INFORMATION_TYPE_4 (28) in TC=3!
07:00:47.831205 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:47.831230 mtc Fail: No SYSTEM_INFORMATION_TYPE_4 (28) in TC=7!
07:00:47.831242 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:47.831265 mtc Fail: No SYSTEM_INFORMATION_TYPE_2bis (2) in TC=5!
07:00:47.831278 mtc setverdict(fail): fail -> fail, component reason not changed
07:00:47.831289 mtc Error: Insufficient SI in array
07:00:47.831300 mtc Test.ttcn:162: Dynamic test case error: testcase.stop
07:00:47.831316 mtc setverdict(error): fail -> error
07:00:47.831326 mtc Performing error recovery.
07:00:47.831362 mtc Terminating component type Test.dummy_CT.
07:00:47.831375 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:00:47.831407 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:00:47.831421 mtc Port GSMTAP was stopped.
07:00:47.831433 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:00:47.831477 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:00:47.831492 mtc Port BSCVTY was stopped.
07:00:47.831503 mtc Component type Test.dummy_CT was shut down inside testcase TC_si_sched_13_2bis_2ter_2quater.
07:00:47.831516 mtc Waiting for PTCs to finish.
07:00:47.831544 mtc Setting final verdict of the test case.
07:00:47.831555 mtc Local verdict of MTC: error
07:00:47.831567 mtc No PTCs were created.
07:00:47.831578 mtc Test case TC_si_sched_13_2bis_2ter_2quater finished. Verdict: error
07:00:47.831608 mtc Executing test case TC_neci in module Test.
07:00:47.831629 mtc Test case TC_neci started.
07:00:47.831640 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_neci.
07:00:47.831667 mtc Port GSMTAP was started.
07:00:47.831680 mtc Port BSCVTY was started.
07:00:47.831691 mtc Component type Test.dummy_CT was initialized.
07:00:47.831709 mtc Random number generator was initialized with seed 57.831707: srand48(-1885996326).
07:00:47.831723 mtc Function rnd() returned 0.355210.
07:00:47.831774 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:00:47.831804 mtc Port GSMTAP was mapped to system:GSMTAP.
07:00:47.831833 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:00:47.831852 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:00:47.831886 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:00:47.832024 mtc Port BSCVTY was mapped to system:BSCVTY.
07:00:47.832059 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:00:47.832079 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:00:47.832101 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:00:47.832115 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:00:47.832133 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:00:47.832145 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:00:47.832162 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:00:47.832204 mtc Sent on BSCVTY to system charstring : "enable"
07:00:47.832236 mtc Start timer T: 2 s
07:00:47.832298 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:00:47.832337 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:00:47.832351 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:00:47.832363 mtc Stop timer T: 2 s
07:00:47.832380 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:47.832401 mtc Start timer T: 2 s
07:00:47.832488 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:00:47.832539 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:00:47.832554 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:00:47.832570 mtc Stop timer T: 2 s
07:00:47.832583 mtc Sent on BSCVTY to system charstring : "network"
07:00:47.832605 mtc Start timer T: 2 s
07:00:47.832657 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:00:47.832713 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:00:47.832727 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:00:47.832741 mtc Stop timer T: 2 s
07:00:47.832756 mtc Sent on BSCVTY to system charstring : "neci 0"
07:00:47.832777 mtc Start timer T: 2 s
07:00:47.832829 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 4
07:00:47.832882 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 4
07:00:47.832896 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:00:47.832910 mtc Stop timer T: 2 s
07:00:47.832923 mtc Sent on BSCVTY to system charstring : "end"
07:00:47.832944 mtc Start timer T: 2 s
07:00:47.832983 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 5
07:00:47.833027 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 5
07:00:47.833043 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:00:47.833055 mtc Stop timer T: 2 s
07:00:47.833072 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:00:47.833098 mtc Start timer T: 2 s
07:00:47.833222 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:00:47.833259 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:00:47.833275 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:00:47.833287 mtc Stop timer T: 2 s
07:00:47.833299 mtc Start timer T: 1 s
07:00:48.833324 mtc Timeout T: 1 s
07:00:48.833389 mtc Port GSMTAP was cleared.
07:00:48.833404 mtc Start timer T: 10 s
07:00:58.839219 mtc Timeout T: 10 s
07:00:58.839276 mtc Error waiting for SI on GSMTAP
07:00:58.839286 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:00:58.839300 mtc setverdict(error): none -> error
07:00:58.839312 mtc Performing error recovery.
07:00:58.839370 mtc Terminating component type Test.dummy_CT.
07:00:58.839389 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:00:58.839419 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:00:58.839431 mtc Port GSMTAP was stopped.
07:00:58.839440 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:00:58.839491 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:00:58.839508 mtc Port BSCVTY was stopped.
07:00:58.839520 mtc Component type Test.dummy_CT was shut down inside testcase TC_neci.
07:00:58.839538 mtc Waiting for PTCs to finish.
07:00:58.839580 mtc Setting final verdict of the test case.
07:00:58.839606 mtc Local verdict of MTC: error
07:00:58.839623 mtc No PTCs were created.
07:00:58.839644 mtc Test case TC_neci finished. Verdict: error
07:00:58.839681 mtc Executing test case TC_cell_resel_hyst in module Test.
07:00:58.839703 mtc Test case TC_cell_resel_hyst started.
07:00:58.839724 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_cell_resel_hyst.
07:00:58.839756 mtc Port GSMTAP was started.
07:00:58.839775 mtc Port BSCVTY was started.
07:00:58.839794 mtc Component type Test.dummy_CT was initialized.
07:00:58.839809 mtc Function rnd() returned 0.851715.
07:00:58.839850 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:00:58.839885 mtc Port GSMTAP was mapped to system:GSMTAP.
07:00:58.839909 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:00:58.839929 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:00:58.839971 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:00:58.840113 mtc Port BSCVTY was mapped to system:BSCVTY.
07:00:58.840152 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:00:58.840170 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:00:58.840194 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:00:58.840207 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:00:58.840226 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:00:58.840240 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:00:58.840262 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:00:58.840313 mtc Sent on BSCVTY to system charstring : "enable"
07:00:58.840347 mtc Start timer T: 2 s
07:00:58.840410 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:00:58.840452 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:00:58.840470 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:00:58.840484 mtc Stop timer T: 2 s
07:00:58.840502 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:00:58.840530 mtc Start timer T: 2 s
07:00:58.840628 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:00:58.840690 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:00:58.840712 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:00:58.840730 mtc Stop timer T: 2 s
07:00:58.840747 mtc Sent on BSCVTY to system charstring : "network"
07:00:58.840774 mtc Start timer T: 2 s
07:00:58.840834 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:00:58.840901 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:00:58.840918 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:00:58.840936 mtc Stop timer T: 2 s
07:00:58.840954 mtc Sent on BSCVTY to system charstring : "bts 0"
07:00:58.840980 mtc Start timer T: 2 s
07:00:58.841041 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:00:58.841094 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:00:58.841106 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:00:58.841115 mtc Stop timer T: 2 s
07:00:58.841137 mtc Sent on BSCVTY to system charstring : "cell reselection hysteresis 10"
07:00:58.841162 mtc Start timer T: 2 s
07:00:58.841274 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:00:58.841330 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:00:58.841348 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:00:58.841364 mtc Stop timer T: 2 s
07:00:58.841382 mtc Sent on BSCVTY to system charstring : "end"
07:00:58.841408 mtc Start timer T: 2 s
07:00:58.841465 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:00:58.841509 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:00:58.841527 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:00:58.841542 mtc Stop timer T: 2 s
07:00:58.841566 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:00:58.841593 mtc Start timer T: 2 s
07:00:58.841722 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:00:58.841756 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:00:58.841773 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:00:58.841788 mtc Stop timer T: 2 s
07:00:58.841804 mtc Start timer T: 1 s
07:00:59.842715 mtc Timeout T: 1 s
07:00:59.842791 mtc Port GSMTAP was cleared.
07:00:59.842810 mtc Start timer T: 10 s
07:01:09.850722 mtc Timeout T: 10 s
07:01:09.850771 mtc Error waiting for SI on GSMTAP
07:01:09.850780 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:01:09.850792 mtc setverdict(error): none -> error
07:01:09.850802 mtc Performing error recovery.
07:01:09.850855 mtc Terminating component type Test.dummy_CT.
07:01:09.850881 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:01:09.850952 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:01:09.850962 mtc Port GSMTAP was stopped.
07:01:09.850970 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:01:09.851061 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:01:09.851107 mtc Port BSCVTY was stopped.
07:01:09.851132 mtc Component type Test.dummy_CT was shut down inside testcase TC_cell_resel_hyst.
07:01:09.851144 mtc Waiting for PTCs to finish.
07:01:09.851229 mtc Setting final verdict of the test case.
07:01:09.851258 mtc Local verdict of MTC: error
07:01:09.851285 mtc No PTCs were created.
07:01:09.851313 mtc Test case TC_cell_resel_hyst finished. Verdict: error
07:01:09.851364 mtc Executing test case TC_rxlev_acc_min in module Test.
07:01:09.851384 mtc Test case TC_rxlev_acc_min started.
07:01:09.851397 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_rxlev_acc_min.
07:01:09.851433 mtc Port GSMTAP was started.
07:01:09.851448 mtc Port BSCVTY was started.
07:01:09.851460 mtc Component type Test.dummy_CT was initialized.
07:01:09.851469 mtc Function rnd() returned 0.188615.
07:01:09.851501 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:01:09.851541 mtc Port GSMTAP was mapped to system:GSMTAP.
07:01:09.851575 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:01:09.851600 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:01:09.851639 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:01:09.851766 mtc Port BSCVTY was mapped to system:BSCVTY.
07:01:09.851802 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:01:09.851819 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:09.851844 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:09.851858 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:09.851875 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:09.851886 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:09.851904 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:09.851951 mtc Sent on BSCVTY to system charstring : "enable"
07:01:09.852037 mtc Start timer T: 2 s
07:01:09.852064 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:01:09.852104 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:01:09.852121 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:01:09.852133 mtc Stop timer T: 2 s
07:01:09.852149 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:01:09.852176 mtc Start timer T: 2 s
07:01:09.852277 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:01:09.852346 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:01:09.852359 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:01:09.852368 mtc Stop timer T: 2 s
07:01:09.852378 mtc Sent on BSCVTY to system charstring : "network"
07:01:09.852404 mtc Start timer T: 2 s
07:01:09.852469 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:01:09.852541 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:01:09.852562 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:01:09.852577 mtc Stop timer T: 2 s
07:01:09.852592 mtc Sent on BSCVTY to system charstring : "bts 0"
07:01:09.852620 mtc Start timer T: 2 s
07:01:09.852684 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:01:09.852745 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:01:09.852760 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:01:09.852774 mtc Stop timer T: 2 s
07:01:09.852798 mtc Sent on BSCVTY to system charstring : "rxlev access min 11"
07:01:09.852818 mtc Start timer T: 2 s
07:01:09.852920 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:01:09.852974 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:01:09.852987 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:01:09.853001 mtc Stop timer T: 2 s
07:01:09.853016 mtc Sent on BSCVTY to system charstring : "end"
07:01:09.853039 mtc Start timer T: 2 s
07:01:09.853100 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:01:09.853132 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:01:09.853150 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:01:09.853162 mtc Stop timer T: 2 s
07:01:09.853178 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:01:09.853206 mtc Start timer T: 2 s
07:01:09.853335 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:01:09.853373 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:01:09.853384 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:01:09.853395 mtc Stop timer T: 2 s
07:01:09.853410 mtc Start timer T: 1 s
07:01:10.853461 mtc Timeout T: 1 s
07:01:10.853526 mtc Port GSMTAP was cleared.
07:01:10.853545 mtc Start timer T: 10 s
07:01:20.854213 mtc Timeout T: 10 s
07:01:20.854268 mtc Error waiting for SI on GSMTAP
07:01:20.854276 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:01:20.854289 mtc setverdict(error): none -> error
07:01:20.854299 mtc Performing error recovery.
07:01:20.854354 mtc Terminating component type Test.dummy_CT.
07:01:20.854380 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:01:20.854425 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:01:20.854452 mtc Port GSMTAP was stopped.
07:01:20.854464 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:01:20.854521 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:01:20.854537 mtc Port BSCVTY was stopped.
07:01:20.854547 mtc Component type Test.dummy_CT was shut down inside testcase TC_rxlev_acc_min.
07:01:20.854561 mtc Waiting for PTCs to finish.
07:01:20.854612 mtc Setting final verdict of the test case.
07:01:20.854630 mtc Local verdict of MTC: error
07:01:20.854644 mtc No PTCs were created.
07:01:20.854667 mtc Test case TC_rxlev_acc_min finished. Verdict: error
07:01:20.854808 mtc Executing test case TC_cellid in module Test.
07:01:20.854840 mtc Test case TC_cellid started.
07:01:20.854859 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_cellid.
07:01:20.854906 mtc Port GSMTAP was started.
07:01:20.854928 mtc Port BSCVTY was started.
07:01:20.854940 mtc Component type Test.dummy_CT was initialized.
07:01:20.854950 mtc Function rnd() returned 0.513113.
07:01:20.854986 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:01:20.855022 mtc Port GSMTAP was mapped to system:GSMTAP.
07:01:20.855057 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:01:20.855080 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:01:20.855118 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:01:20.855305 mtc Port BSCVTY was mapped to system:BSCVTY.
07:01:20.855340 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:01:20.855378 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:20.855407 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:20.855426 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:20.855441 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:20.855448 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:20.855460 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:20.855497 mtc Sent on BSCVTY to system charstring : "enable"
07:01:20.855520 mtc Start timer T: 2 s
07:01:20.855584 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:01:20.855632 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:01:20.855650 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:01:20.855663 mtc Stop timer T: 2 s
07:01:20.855678 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:01:20.855791 mtc Start timer T: 2 s
07:01:20.855853 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:01:20.855905 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:01:20.855916 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:01:20.855924 mtc Stop timer T: 2 s
07:01:20.855934 mtc Sent on BSCVTY to system charstring : "network"
07:01:20.855952 mtc Start timer T: 2 s
07:01:20.856012 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:01:20.856092 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:01:20.856112 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:01:20.856133 mtc Stop timer T: 2 s
07:01:20.856152 mtc Sent on BSCVTY to system charstring : "bts 0"
07:01:20.856248 mtc Start timer T: 2 s
07:01:20.856285 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:01:20.856352 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:01:20.856372 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:01:20.856389 mtc Stop timer T: 2 s
07:01:20.856407 mtc Sent on BSCVTY to system charstring : "cell_identity 33626"
07:01:20.856432 mtc Start timer T: 2 s
07:01:20.856520 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:01:20.856587 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:01:20.856601 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:01:20.856610 mtc Stop timer T: 2 s
07:01:20.856619 mtc Sent on BSCVTY to system charstring : "end"
07:01:20.856636 mtc Start timer T: 2 s
07:01:20.856687 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:01:20.856730 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:01:20.856745 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:01:20.856758 mtc Stop timer T: 2 s
07:01:20.856778 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:01:20.856803 mtc Start timer T: 2 s
07:01:20.856932 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:01:20.856965 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:01:20.856979 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:01:20.856991 mtc Stop timer T: 2 s
07:01:20.857003 mtc Start timer T: 1 s
07:01:21.857058 mtc Timeout T: 1 s
07:01:21.857117 mtc Port GSMTAP was cleared.
07:01:21.857136 mtc Start timer T: 10 s
07:01:31.866237 mtc Timeout T: 10 s
07:01:31.866290 mtc Error waiting for SI on GSMTAP
07:01:31.866301 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:01:31.866318 mtc setverdict(error): none -> error
07:01:31.866348 mtc Performing error recovery.
07:01:31.866416 mtc Terminating component type Test.dummy_CT.
07:01:31.866430 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:01:31.866481 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:01:31.866495 mtc Port GSMTAP was stopped.
07:01:31.866508 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:01:31.866617 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:01:31.866634 mtc Port BSCVTY was stopped.
07:01:31.866647 mtc Component type Test.dummy_CT was shut down inside testcase TC_cellid.
07:01:31.866674 mtc Waiting for PTCs to finish.
07:01:31.866709 mtc Setting final verdict of the test case.
07:01:31.866726 mtc Local verdict of MTC: error
07:01:31.866741 mtc No PTCs were created.
07:01:31.866749 mtc Test case TC_cellid finished. Verdict: error
07:01:31.866794 mtc Executing test case TC_lac in module Test.
07:01:31.866817 mtc Test case TC_lac started.
07:01:31.866827 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_lac.
07:01:31.866853 mtc Port GSMTAP was started.
07:01:31.866866 mtc Port BSCVTY was started.
07:01:31.866871 mtc Component type Test.dummy_CT was initialized.
07:01:31.866878 mtc Function rnd() returned 0.862128.
07:01:31.866920 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:01:31.866971 mtc Port GSMTAP was mapped to system:GSMTAP.
07:01:31.867002 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:01:31.867022 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:01:31.867064 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:01:31.867193 mtc Port BSCVTY was mapped to system:BSCVTY.
07:01:31.867223 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:01:31.867241 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:31.867264 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:31.867277 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:31.867294 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:31.867306 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:31.867327 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:31.867370 mtc Sent on BSCVTY to system charstring : "enable"
07:01:31.867397 mtc Start timer T: 2 s
07:01:31.867459 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:01:31.867498 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:01:31.867511 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:01:31.867523 mtc Stop timer T: 2 s
07:01:31.867538 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:01:31.867560 mtc Start timer T: 2 s
07:01:31.867655 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:01:31.867723 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:01:31.867737 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:01:31.867753 mtc Stop timer T: 2 s
07:01:31.867766 mtc Sent on BSCVTY to system charstring : "network"
07:01:31.867789 mtc Start timer T: 2 s
07:01:31.867841 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:01:31.867904 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:01:31.867920 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:01:31.867937 mtc Stop timer T: 2 s
07:01:31.867953 mtc Sent on BSCVTY to system charstring : "bts 0"
07:01:31.867976 mtc Start timer T: 2 s
07:01:31.868032 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:01:31.868093 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:01:31.868108 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:01:31.868122 mtc Stop timer T: 2 s
07:01:31.868136 mtc Sent on BSCVTY to system charstring : "location_area_code 56499"
07:01:31.868153 mtc Start timer T: 2 s
07:01:31.868240 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:01:31.868297 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:01:31.868312 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:01:31.868326 mtc Stop timer T: 2 s
07:01:31.868339 mtc Sent on BSCVTY to system charstring : "end"
07:01:31.868360 mtc Start timer T: 2 s
07:01:31.868412 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:01:31.868443 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:01:31.868455 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:01:31.868467 mtc Stop timer T: 2 s
07:01:31.868482 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:01:31.868503 mtc Start timer T: 2 s
07:01:31.868623 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:01:31.868650 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:01:31.868659 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:01:31.868665 mtc Stop timer T: 2 s
07:01:31.868674 mtc Start timer T: 1 s
07:01:32.868732 mtc Timeout T: 1 s
07:01:32.868884 mtc Port GSMTAP was cleared.
07:01:32.868947 mtc Start timer T: 10 s
07:01:42.874714 mtc Timeout T: 10 s
07:01:42.874768 mtc Error waiting for SI on GSMTAP
07:01:42.874777 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:01:42.874790 mtc setverdict(error): none -> error
07:01:42.874800 mtc Performing error recovery.
07:01:42.874842 mtc Terminating component type Test.dummy_CT.
07:01:42.874885 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:01:42.874929 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:01:42.874953 mtc Port GSMTAP was stopped.
07:01:42.874979 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:01:42.875046 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:01:42.875061 mtc Port BSCVTY was stopped.
07:01:42.875071 mtc Component type Test.dummy_CT was shut down inside testcase TC_lac.
07:01:42.875086 mtc Waiting for PTCs to finish.
07:01:42.875122 mtc Setting final verdict of the test case.
07:01:42.875135 mtc Local verdict of MTC: error
07:01:42.875147 mtc No PTCs were created.
07:01:42.875157 mtc Test case TC_lac finished. Verdict: error
07:01:42.875198 mtc Executing test case TC_rach_tx_int in module Test.
07:01:42.875223 mtc Test case TC_rach_tx_int started.
07:01:42.875235 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_rach_tx_int.
07:01:42.875264 mtc Port GSMTAP was started.
07:01:42.875278 mtc Port BSCVTY was started.
07:01:42.875290 mtc Component type Test.dummy_CT was initialized.
07:01:42.875303 mtc Function rnd() returned 0.651754.
07:01:42.875342 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:01:42.875377 mtc Port GSMTAP was mapped to system:GSMTAP.
07:01:42.875402 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:01:42.875419 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:01:42.875456 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:01:42.875578 mtc Port BSCVTY was mapped to system:BSCVTY.
07:01:42.875606 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:01:42.875623 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:42.875645 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:42.875660 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:42.875677 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:42.875690 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:42.875708 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:42.875749 mtc Sent on BSCVTY to system charstring : "enable"
07:01:42.875776 mtc Start timer T: 2 s
07:01:42.875837 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:01:42.875886 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:01:42.875901 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:01:42.875912 mtc Stop timer T: 2 s
07:01:42.875925 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:01:42.875947 mtc Start timer T: 2 s
07:01:42.876054 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:01:42.876114 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:01:42.876126 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:01:42.876137 mtc Stop timer T: 2 s
07:01:42.876152 mtc Sent on BSCVTY to system charstring : "network"
07:01:42.876179 mtc Start timer T: 2 s
07:01:42.876262 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:01:42.876323 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:01:42.876338 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:01:42.876352 mtc Stop timer T: 2 s
07:01:42.876369 mtc Sent on BSCVTY to system charstring : "bts 0"
07:01:42.876395 mtc Start timer T: 2 s
07:01:42.876478 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:01:42.876551 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:01:42.876567 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:01:42.876577 mtc Stop timer T: 2 s
07:01:42.876588 mtc Sent on BSCVTY to system charstring : "rach tx integer 9"
07:01:42.876604 mtc Start timer T: 2 s
07:01:42.876697 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:01:42.876760 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:01:42.876774 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:01:42.876788 mtc Stop timer T: 2 s
07:01:42.876804 mtc Sent on BSCVTY to system charstring : "end"
07:01:42.876823 mtc Start timer T: 2 s
07:01:42.876871 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:01:42.876917 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:01:42.876934 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:01:42.876948 mtc Stop timer T: 2 s
07:01:42.876966 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:01:42.876992 mtc Start timer T: 2 s
07:01:42.877118 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:01:42.877150 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:01:42.877165 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:01:42.877177 mtc Stop timer T: 2 s
07:01:42.877190 mtc Start timer T: 1 s
07:01:43.877271 mtc Timeout T: 1 s
07:01:43.877427 mtc Port GSMTAP was cleared.
07:01:43.877495 mtc Start timer T: 10 s
07:01:53.886836 mtc Timeout T: 10 s
07:01:53.886921 mtc Error waiting for SI on GSMTAP
07:01:53.886942 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:01:53.886976 mtc setverdict(error): none -> error
07:01:53.887001 mtc Performing error recovery.
07:01:53.887070 mtc Terminating component type Test.dummy_CT.
07:01:53.887099 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:01:53.887154 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:01:53.887184 mtc Port GSMTAP was stopped.
07:01:53.887211 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:01:53.887304 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:01:53.887367 mtc Port BSCVTY was stopped.
07:01:53.887403 mtc Component type Test.dummy_CT was shut down inside testcase TC_rach_tx_int.
07:01:53.887432 mtc Waiting for PTCs to finish.
07:01:53.887504 mtc Setting final verdict of the test case.
07:01:53.887531 mtc Local verdict of MTC: error
07:01:53.887548 mtc No PTCs were created.
07:01:53.887565 mtc Test case TC_rach_tx_int finished. Verdict: error
07:01:53.887639 mtc Executing test case TC_rach_max_tx in module Test.
07:01:53.887705 mtc Test case TC_rach_max_tx started.
07:01:53.887729 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_rach_max_tx.
07:01:53.887784 mtc Port GSMTAP was started.
07:01:53.887835 mtc Port BSCVTY was started.
07:01:53.887858 mtc Component type Test.dummy_CT was initialized.
07:01:53.887882 mtc Function rnd() returned 0.135830.
07:01:53.887945 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:01:53.888009 mtc Port GSMTAP was mapped to system:GSMTAP.
07:01:53.888076 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:01:53.888119 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:01:53.888178 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:01:53.888410 mtc Port BSCVTY was mapped to system:BSCVTY.
07:01:53.888475 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:01:53.888505 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:53.888545 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:01:53.888573 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:53.888627 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:01:53.888645 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:53.888670 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:01:53.888758 mtc Sent on BSCVTY to system charstring : "enable"
07:01:53.888824 mtc Start timer T: 2 s
07:01:53.889021 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:01:53.889141 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:01:53.889185 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:01:53.889205 mtc Stop timer T: 2 s
07:01:53.889228 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:01:53.889277 mtc Start timer T: 2 s
07:01:53.889511 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:01:53.889662 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:01:53.889691 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:01:53.889756 mtc Stop timer T: 2 s
07:01:53.889812 mtc Sent on BSCVTY to system charstring : "network"
07:01:53.889917 mtc Start timer T: 2 s
07:01:53.889991 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:01:53.890145 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:01:53.890170 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:01:53.890195 mtc Stop timer T: 2 s
07:01:53.890215 mtc Sent on BSCVTY to system charstring : "bts 0"
07:01:53.890249 mtc Start timer T: 2 s
07:01:53.890347 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:01:53.890500 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:01:53.890536 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:01:53.890566 mtc Stop timer T: 2 s
07:01:53.890605 mtc Sent on BSCVTY to system charstring : "rach max transmission 1"
07:01:53.890671 mtc Start timer T: 2 s
07:01:53.890836 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:01:53.890961 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:01:53.890993 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:01:53.891026 mtc Stop timer T: 2 s
07:01:53.891057 mtc Sent on BSCVTY to system charstring : "end"
07:01:53.891109 mtc Start timer T: 2 s
07:01:53.891218 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:01:53.891275 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:01:53.891294 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:01:53.891309 mtc Stop timer T: 2 s
07:01:53.891334 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:01:53.891377 mtc Start timer T: 2 s
07:01:53.891694 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:01:53.891764 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:01:53.891793 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:01:53.891819 mtc Stop timer T: 2 s
07:01:53.891847 mtc Start timer T: 1 s
07:01:54.891964 mtc Timeout T: 1 s
07:01:54.892114 mtc Port GSMTAP was cleared.
07:01:54.892181 mtc Start timer T: 10 s
07:02:04.901442 mtc Timeout T: 10 s
07:02:04.901587 mtc Error waiting for SI on GSMTAP
07:02:04.925887 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:02:04.925996 mtc setverdict(error): none -> error
07:02:04.926042 mtc Performing error recovery.
07:02:04.926181 mtc Terminating component type Test.dummy_CT.
07:02:04.926255 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:02:04.926376 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:02:04.926429 mtc Port GSMTAP was stopped.
07:02:04.926460 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:02:04.926597 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:02:04.926707 mtc Port BSCVTY was stopped.
07:02:04.926755 mtc Component type Test.dummy_CT was shut down inside testcase TC_rach_max_tx.
07:02:04.926810 mtc Waiting for PTCs to finish.
07:02:04.926957 mtc Setting final verdict of the test case.
07:02:04.927017 mtc Local verdict of MTC: error
07:02:04.927065 mtc No PTCs were created.
07:02:04.927107 mtc Test case TC_rach_max_tx finished. Verdict: error
07:02:04.927232 mtc Executing test case TC_attach in module Test.
07:02:04.927404 mtc Test case TC_attach started.
07:02:04.927456 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_attach.
07:02:04.927556 mtc Port GSMTAP was started.
07:02:04.927682 mtc Port BSCVTY was started.
07:02:04.927728 mtc Component type Test.dummy_CT was initialized.
07:02:04.927775 mtc Function rnd() returned 0.683780.
07:02:04.927895 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:02:04.928015 mtc Port GSMTAP was mapped to system:GSMTAP.
07:02:04.928138 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:02:04.928241 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:02:04.928371 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:02:04.928875 mtc Port BSCVTY was mapped to system:BSCVTY.
07:02:04.929011 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:02:04.929093 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:04.929185 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:04.929248 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:04.929308 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:04.929343 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:04.929390 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:04.929566 mtc Sent on BSCVTY to system charstring : "enable"
07:02:04.929986 mtc Start timer T: 2 s
07:02:04.930094 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:02:04.930272 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:02:04.930338 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:02:04.930373 mtc Stop timer T: 2 s
07:02:04.930429 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:02:04.930532 mtc Start timer T: 2 s
07:02:04.930939 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:02:04.931214 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:02:04.931263 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:02:04.931302 mtc Stop timer T: 2 s
07:02:04.931342 mtc Sent on BSCVTY to system charstring : "network"
07:02:04.931408 mtc Start timer T: 2 s
07:02:04.931567 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:02:04.931631 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:02:04.931644 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:02:04.931656 mtc Stop timer T: 2 s
07:02:04.931669 mtc Sent on BSCVTY to system charstring : "bts 0"
07:02:04.931690 mtc Start timer T: 2 s
07:02:04.931761 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:02:04.931863 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:02:04.931883 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:02:04.931918 mtc Stop timer T: 2 s
07:02:04.931942 mtc Sent on BSCVTY to system charstring : "channel-descrption attach 0"
07:02:04.932076 mtc Start timer T: 2 s
07:02:04.932119 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:02:04.932211 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:02:04.932246 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:02:04.932267 mtc Stop timer T: 2 s
07:02:04.932316 mtc Sent on BSCVTY to system charstring : "end"
07:02:04.932395 mtc Start timer T: 2 s
07:02:04.932434 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:02:04.932480 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:02:04.932493 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:02:04.932502 mtc Stop timer T: 2 s
07:02:04.932517 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:02:04.932551 mtc Start timer T: 2 s
07:02:04.932736 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:02:04.932821 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:02:04.932859 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:02:04.932878 mtc Stop timer T: 2 s
07:02:04.932912 mtc Start timer T: 1 s
07:02:05.933130 mtc Timeout T: 1 s
07:02:05.933309 mtc Port GSMTAP was cleared.
07:02:05.933355 mtc Start timer T: 10 s
07:02:15.942726 mtc Timeout T: 10 s
07:02:15.942867 mtc Error waiting for SI on GSMTAP
07:02:15.942901 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:02:15.942949 mtc setverdict(error): none -> error
07:02:15.942983 mtc Performing error recovery.
07:02:15.943091 mtc Terminating component type Test.dummy_CT.
07:02:15.943143 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:02:15.943225 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:02:15.943284 mtc Port GSMTAP was stopped.
07:02:15.943322 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:02:15.943462 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:02:15.943555 mtc Port BSCVTY was stopped.
07:02:15.943611 mtc Component type Test.dummy_CT was shut down inside testcase TC_attach.
07:02:15.943681 mtc Waiting for PTCs to finish.
07:02:15.943802 mtc Setting final verdict of the test case.
07:02:15.943912 mtc Local verdict of MTC: error
07:02:15.943981 mtc No PTCs were created.
07:02:15.944030 mtc Test case TC_attach finished. Verdict: error
07:02:15.944176 mtc Executing test case TC_dtx_ul in module Test.
07:02:15.944301 mtc Test case TC_dtx_ul started.
07:02:15.944354 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_dtx_ul.
07:02:15.944442 mtc Port GSMTAP was started.
07:02:15.944494 mtc Port BSCVTY was started.
07:02:15.944518 mtc Component type Test.dummy_CT was initialized.
07:02:15.944558 mtc Function rnd() returned 0.167292.
07:02:15.944678 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:02:15.944935 mtc Port GSMTAP was mapped to system:GSMTAP.
07:02:15.945127 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:02:15.945246 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:02:15.945370 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:02:15.945871 mtc Port BSCVTY was mapped to system:BSCVTY.
07:02:15.946013 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:02:15.946089 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:15.946183 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:15.946238 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:15.946311 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:15.946414 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:15.946489 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:15.946643 mtc Sent on BSCVTY to system charstring : "enable"
07:02:15.946891 mtc Start timer T: 2 s
07:02:15.947063 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:02:15.947225 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:02:15.947270 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:02:15.947299 mtc Stop timer T: 2 s
07:02:15.947349 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:02:15.947434 mtc Start timer T: 2 s
07:02:15.947590 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:02:15.947656 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:02:15.947670 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:02:15.947682 mtc Stop timer T: 2 s
07:02:15.947694 mtc Sent on BSCVTY to system charstring : "network"
07:02:15.947717 mtc Start timer T: 2 s
07:02:15.947791 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:02:15.947860 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:02:15.947875 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:02:15.947892 mtc Stop timer T: 2 s
07:02:15.947912 mtc Sent on BSCVTY to system charstring : "bts 0"
07:02:15.947940 mtc Start timer T: 2 s
07:02:15.948023 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:02:15.948107 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:02:15.948127 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:02:15.948150 mtc Stop timer T: 2 s
07:02:15.948168 mtc Sent on BSCVTY to system charstring : "dtx uplink"
07:02:15.948193 mtc Start timer T: 2 s
07:02:15.948296 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:02:15.948376 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:02:15.948401 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:02:15.948417 mtc Stop timer T: 2 s
07:02:15.948436 mtc Port GSMTAP was cleared.
07:02:15.948446 mtc Start timer T: 10 s
07:02:25.957581 mtc Timeout T: 10 s
07:02:25.957712 mtc Error waiting for SI on GSMTAP
07:02:25.957747 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:02:25.957793 mtc setverdict(error): none -> error
07:02:25.957829 mtc Performing error recovery.
07:02:25.957955 mtc Terminating component type Test.dummy_CT.
07:02:25.958012 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:02:25.958097 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:02:25.958152 mtc Port GSMTAP was stopped.
07:02:25.958227 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:02:25.958380 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:02:25.958453 mtc Port BSCVTY was stopped.
07:02:25.958486 mtc Component type Test.dummy_CT was shut down inside testcase TC_dtx_ul.
07:02:25.958525 mtc Waiting for PTCs to finish.
07:02:25.958605 mtc Setting final verdict of the test case.
07:02:25.958688 mtc Local verdict of MTC: error
07:02:25.958738 mtc No PTCs were created.
07:02:25.958788 mtc Test case TC_dtx_ul finished. Verdict: error
07:02:25.958911 mtc Executing test case TC_emerg_allowed in module Test.
07:02:25.958990 mtc Test case TC_emerg_allowed started.
07:02:25.959032 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_emerg_allowed.
07:02:25.959135 mtc Port GSMTAP was started.
07:02:25.959204 mtc Port BSCVTY was started.
07:02:25.959246 mtc Component type Test.dummy_CT was initialized.
07:02:25.959294 mtc Function rnd() returned 0.075817.
07:02:25.959420 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:02:25.959547 mtc Port GSMTAP was mapped to system:GSMTAP.
07:02:25.959709 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:02:25.959784 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:02:25.959907 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:02:25.960474 mtc Port BSCVTY was mapped to system:BSCVTY.
07:02:25.960606 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:02:25.960672 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:25.960776 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:25.960838 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:25.960924 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:25.960970 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:25.961021 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:25.961191 mtc Sent on BSCVTY to system charstring : "enable"
07:02:25.961461 mtc Start timer T: 2 s
07:02:25.961561 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:02:25.961674 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:02:25.961720 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:02:25.961767 mtc Stop timer T: 2 s
07:02:25.961830 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:02:25.962076 mtc Start timer T: 2 s
07:02:25.962328 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:02:25.962508 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:02:25.962530 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:02:25.962543 mtc Stop timer T: 2 s
07:02:25.962561 mtc Sent on BSCVTY to system charstring : "network"
07:02:25.962583 mtc Start timer T: 2 s
07:02:25.962641 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:02:25.962733 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:02:25.962753 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:02:25.962773 mtc Stop timer T: 2 s
07:02:25.962791 mtc Sent on BSCVTY to system charstring : "bts 0"
07:02:25.962819 mtc Start timer T: 2 s
07:02:25.962885 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:02:25.962940 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:02:25.962956 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:02:25.962971 mtc Stop timer T: 2 s
07:02:25.962989 mtc Sent on BSCVTY to system charstring : "rach emergency call allowed 0"
07:02:25.963013 mtc Start timer T: 2 s
07:02:25.963107 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:02:25.963155 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:02:25.963166 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:02:25.963175 mtc Stop timer T: 2 s
07:02:25.963186 mtc Sent on BSCVTY to system charstring : "end"
07:02:25.963203 mtc Start timer T: 2 s
07:02:25.963250 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:02:25.963273 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:02:25.963285 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:02:25.963295 mtc Stop timer T: 2 s
07:02:25.963311 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:02:25.963441 mtc Start timer T: 2 s
07:02:25.963479 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:02:25.963512 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:02:25.963527 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:02:25.963540 mtc Stop timer T: 2 s
07:02:25.963553 mtc Start timer T: 1 s
07:02:26.963651 mtc Timeout T: 1 s
07:02:26.963809 mtc Port GSMTAP was cleared.
07:02:26.963876 mtc Start timer T: 10 s
07:02:36.973107 mtc Timeout T: 10 s
07:02:36.973239 mtc Error waiting for SI on GSMTAP
07:02:36.973283 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:02:36.973361 mtc setverdict(error): none -> error
07:02:36.973412 mtc Performing error recovery.
07:02:36.973539 mtc Terminating component type Test.dummy_CT.
07:02:36.973595 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:02:36.973696 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:02:36.973755 mtc Port GSMTAP was stopped.
07:02:36.973801 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:02:36.973960 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:02:36.974019 mtc Port BSCVTY was stopped.
07:02:36.974061 mtc Component type Test.dummy_CT was shut down inside testcase TC_emerg_allowed.
07:02:36.974118 mtc Waiting for PTCs to finish.
07:02:36.974236 mtc Setting final verdict of the test case.
07:02:36.974285 mtc Local verdict of MTC: error
07:02:36.974336 mtc No PTCs were created.
07:02:36.974383 mtc Test case TC_emerg_allowed finished. Verdict: error
07:02:36.974528 mtc Executing test case TC_bs_pa_mfrms in module Test.
07:02:36.974633 mtc Test case TC_bs_pa_mfrms started.
07:02:36.974808 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_bs_pa_mfrms.
07:02:36.974916 mtc Port GSMTAP was started.
07:02:36.974966 mtc Port BSCVTY was started.
07:02:36.974989 mtc Component type Test.dummy_CT was initialized.
07:02:36.975016 mtc Function rnd() returned 0.131607.
07:02:36.975110 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:02:36.975327 mtc Port GSMTAP was mapped to system:GSMTAP.
07:02:36.975512 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:02:36.975626 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:02:36.975738 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:02:36.976217 mtc Port BSCVTY was mapped to system:BSCVTY.
07:02:36.976336 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:02:36.976393 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:36.976480 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:36.976547 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:36.976633 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:36.976695 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:36.976748 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:36.976886 mtc Sent on BSCVTY to system charstring : "enable"
07:02:36.976991 mtc Start timer T: 2 s
07:02:36.977189 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:02:36.977372 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:02:36.977448 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:02:36.977503 mtc Stop timer T: 2 s
07:02:36.977570 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:02:36.977677 mtc Start timer T: 2 s
07:02:36.978027 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:02:36.978273 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:02:36.978341 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:02:36.978408 mtc Stop timer T: 2 s
07:02:36.978469 mtc Sent on BSCVTY to system charstring : "network"
07:02:36.978573 mtc Start timer T: 2 s
07:02:36.978827 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:02:36.979177 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:02:36.979253 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:02:36.979325 mtc Stop timer T: 2 s
07:02:36.979397 mtc Sent on BSCVTY to system charstring : "bts 0"
07:02:36.979510 mtc Start timer T: 2 s
07:02:36.979802 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:02:36.980140 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:02:36.980193 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:02:36.980235 mtc Stop timer T: 2 s
07:02:36.980283 mtc Sent on BSCVTY to system charstring : "channel-descrption bs-pa-mfrms 2"
07:02:36.980386 mtc Start timer T: 2 s
07:02:36.980637 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:02:36.980912 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:02:36.980987 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:02:36.981057 mtc Stop timer T: 2 s
07:02:36.981120 mtc Sent on BSCVTY to system charstring : "end"
07:02:36.981224 mtc Start timer T: 2 s
07:02:36.981429 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:02:36.981548 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:02:36.981603 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:02:36.981654 mtc Stop timer T: 2 s
07:02:36.981723 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:02:36.981820 mtc Start timer T: 2 s
07:02:36.982296 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:02:36.982431 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:02:36.982478 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:02:36.982517 mtc Stop timer T: 2 s
07:02:36.982551 mtc Start timer T: 1 s
07:02:37.982680 mtc Timeout T: 1 s
07:02:37.982826 mtc Port GSMTAP was cleared.
07:02:37.982893 mtc Start timer T: 10 s
07:02:47.992109 mtc Timeout T: 10 s
07:02:47.992233 mtc Error waiting for SI on GSMTAP
07:02:47.992267 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:02:47.992313 mtc setverdict(error): none -> error
07:02:47.992347 mtc Performing error recovery.
07:02:47.992455 mtc Terminating component type Test.dummy_CT.
07:02:47.992499 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:02:47.992575 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:02:47.992623 mtc Port GSMTAP was stopped.
07:02:47.992665 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:02:47.992800 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:02:47.992857 mtc Port BSCVTY was stopped.
07:02:47.992897 mtc Component type Test.dummy_CT was shut down inside testcase TC_bs_pa_mfrms.
07:02:47.992951 mtc Waiting for PTCs to finish.
07:02:47.993088 mtc Setting final verdict of the test case.
07:02:47.993138 mtc Local verdict of MTC: error
07:02:47.993184 mtc No PTCs were created.
07:02:47.993225 mtc Test case TC_bs_pa_mfrms finished. Verdict: error
07:02:47.993382 mtc Executing test case TC_bs_ag_blks_res in module Test.
07:02:47.993465 mtc Test case TC_bs_ag_blks_res started.
07:02:47.993513 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_bs_ag_blks_res.
07:02:47.993628 mtc Port GSMTAP was started.
07:02:47.993684 mtc Port BSCVTY was started.
07:02:47.993742 mtc Component type Test.dummy_CT was initialized.
07:02:47.993791 mtc Function rnd() returned 0.256898.
07:02:47.993899 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:02:47.994017 mtc Port GSMTAP was mapped to system:GSMTAP.
07:02:47.994139 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:02:47.994208 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:02:47.994335 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:02:47.994789 mtc Port BSCVTY was mapped to system:BSCVTY.
07:02:47.994917 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:02:47.994982 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:47.995080 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:47.995146 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:47.995226 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:47.995282 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:47.995361 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:47.995522 mtc Sent on BSCVTY to system charstring : "enable"
07:02:47.995637 mtc Start timer T: 2 s
07:02:47.995802 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:02:47.995912 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:02:47.995952 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:02:47.995980 mtc Stop timer T: 2 s
07:02:47.996016 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:02:47.996084 mtc Start timer T: 2 s
07:02:47.996380 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:02:47.996625 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:02:47.996690 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:02:47.996758 mtc Stop timer T: 2 s
07:02:47.996816 mtc Sent on BSCVTY to system charstring : "network"
07:02:47.997028 mtc Start timer T: 2 s
07:02:47.997149 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:02:47.997371 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:02:47.997400 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:02:47.997416 mtc Stop timer T: 2 s
07:02:47.997431 mtc Sent on BSCVTY to system charstring : "bts 0"
07:02:47.997489 mtc Start timer T: 2 s
07:02:47.997520 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:02:47.997580 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:02:47.997596 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:02:47.997611 mtc Stop timer T: 2 s
07:02:47.997628 mtc Sent on BSCVTY to system charstring : "channel-descrption bs-ag-blks-res 1"
07:02:47.997649 mtc Start timer T: 2 s
07:02:47.997734 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:02:47.997779 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:02:47.997789 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:02:47.997798 mtc Stop timer T: 2 s
07:02:47.997809 mtc Sent on BSCVTY to system charstring : "end"
07:02:47.997826 mtc Start timer T: 2 s
07:02:47.997872 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:02:47.997897 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:02:47.997908 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:02:47.997915 mtc Stop timer T: 2 s
07:02:47.997925 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:02:47.997942 mtc Start timer T: 2 s
07:02:47.998059 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:02:47.998098 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:02:47.998114 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:02:47.998129 mtc Stop timer T: 2 s
07:02:47.998143 mtc Start timer T: 1 s
07:02:48.998239 mtc Timeout T: 1 s
07:02:48.998388 mtc Port GSMTAP was cleared.
07:02:48.998430 mtc Start timer T: 10 s
07:02:59.007635 mtc Timeout T: 10 s
07:02:59.007763 mtc Error waiting for SI on GSMTAP
07:02:59.007795 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:02:59.007842 mtc setverdict(error): none -> error
07:02:59.007878 mtc Performing error recovery.
07:02:59.007982 mtc Terminating component type Test.dummy_CT.
07:02:59.008026 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:02:59.008115 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:02:59.008158 mtc Port GSMTAP was stopped.
07:02:59.008185 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:02:59.008285 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:02:59.008334 mtc Port BSCVTY was stopped.
07:02:59.008370 mtc Component type Test.dummy_CT was shut down inside testcase TC_bs_ag_blks_res.
07:02:59.008422 mtc Waiting for PTCs to finish.
07:02:59.008549 mtc Setting final verdict of the test case.
07:02:59.008610 mtc Local verdict of MTC: error
07:02:59.008657 mtc No PTCs were created.
07:02:59.008716 mtc Test case TC_bs_ag_blks_res finished. Verdict: error
07:02:59.008869 mtc Executing test case TC_radio_link_timeout in module Test.
07:02:59.008942 mtc Test case TC_radio_link_timeout started.
07:02:59.009004 mtc Initializing variables, timers and ports of component type Test.dummy_CT inside testcase TC_radio_link_timeout.
07:02:59.009110 mtc Port GSMTAP was started.
07:02:59.009166 mtc Port BSCVTY was started.
07:02:59.009203 mtc Component type Test.dummy_CT was initialized.
07:02:59.009254 mtc Function rnd() returned 0.051342.
07:02:59.009366 mtc Mapping port mtc:GSMTAP to system:GSMTAP.
07:02:59.009493 mtc Port GSMTAP was mapped to system:GSMTAP.
07:02:59.009607 mtc Map operation of mtc:GSMTAP to system:GSMTAP finished.
07:02:59.009669 mtc entering f__IPL4__PROVIDER__listen: 0.0.0.0:4729 / UDP
07:02:59.009794 mtc Mapping port mtc:BSCVTY to system:BSCVTY.
07:02:59.010219 mtc Port BSCVTY was mapped to system:BSCVTY.
07:02:59.010343 mtc Map operation of mtc:BSCVTY to system:BSCVTY finished.
07:02:59.010405 mtc { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:59.010501 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 1, prompt := "OpenBSC> ", has_wildcards := false } }
07:02:59.010555 mtc { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:59.010626 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 2, prompt := "OpenBSC# ", has_wildcards := false } }
07:02:59.010733 mtc { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:59.010810 mtc Sent on BSCVTY to system @TELNETasp_PortType.ASP_TelnetDynamicConfig : { prompt := { id := 3, prompt := "OpenBSC(*)", has_wildcards := true } }
07:02:59.010964 mtc Sent on BSCVTY to system charstring : "enable"
07:02:59.011075 mtc Start timer T: 2 s
07:02:59.011248 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 1
07:02:59.011387 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 1
07:02:59.011442 mtc Message with id 1 was extracted from the queue of BSCVTY.
07:02:59.011494 mtc Stop timer T: 2 s
07:02:59.011559 mtc Sent on BSCVTY to system charstring : "configure terminal"
07:02:59.011654 mtc Start timer T: 2 s
07:02:59.011952 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config)# " id 2
07:02:59.012191 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config)# " id 2
07:02:59.012254 mtc Message with id 2 was extracted from the queue of BSCVTY.
07:02:59.012322 mtc Stop timer T: 2 s
07:02:59.012379 mtc Sent on BSCVTY to system charstring : "network"
07:02:59.012587 mtc Start timer T: 2 s
07:02:59.012714 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net)# " id 3
07:02:59.012941 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net)# " id 3
07:02:59.013003 mtc Message with id 3 was extracted from the queue of BSCVTY.
07:02:59.013068 mtc Stop timer T: 2 s
07:02:59.013128 mtc Sent on BSCVTY to system charstring : "bts 0"
07:02:59.013345 mtc Start timer T: 2 s
07:02:59.013375 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 4
07:02:59.013428 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 4
07:02:59.013442 mtc Message with id 4 was extracted from the queue of BSCVTY.
07:02:59.013457 mtc Stop timer T: 2 s
07:02:59.013473 mtc Sent on BSCVTY to system charstring : "radio-link-timeout 4"
07:02:59.013559 mtc Start timer T: 2 s
07:02:59.013588 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC(config-net-bts)# " id 5
07:02:59.013641 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC(config-net-bts)# " id 5
07:02:59.013656 mtc Message with id 5 was extracted from the queue of BSCVTY.
07:02:59.013671 mtc Stop timer T: 2 s
07:02:59.013685 mtc Sent on BSCVTY to system charstring : "end"
07:02:59.013743 mtc Start timer T: 2 s
07:02:59.013764 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 6
07:02:59.013793 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 6
07:02:59.013807 mtc Message with id 6 was extracted from the queue of BSCVTY.
07:02:59.013819 mtc Stop timer T: 2 s
07:02:59.013836 mtc Sent on BSCVTY to system charstring : "bts 0 resend-system-information"
07:02:59.013954 mtc Start timer T: 2 s
07:02:59.013977 mtc Message enqueued on BSCVTY from system charstring : "OpenBSC# " id 7
07:02:59.014005 mtc Receive operation on port BSCVTY succeeded, message from system(): charstring : "OpenBSC# " id 7
07:02:59.014018 mtc Message with id 7 was extracted from the queue of BSCVTY.
07:02:59.014030 mtc Stop timer T: 2 s
07:02:59.014042 mtc Start timer T: 1 s
07:03:00.015094 mtc Timeout T: 1 s
07:03:00.015210 mtc Port GSMTAP was cleared.
07:03:00.015272 mtc Start timer T: 10 s
07:03:10.024639 mtc Timeout T: 10 s
07:03:10.024797 mtc Error waiting for SI on GSMTAP
07:03:10.024849 mtc Test.ttcn:478: Dynamic test case error: testcase.stop
07:03:10.024943 mtc setverdict(error): none -> error
07:03:10.025002 mtc Performing error recovery.
07:03:10.025158 mtc Terminating component type Test.dummy_CT.
07:03:10.025248 mtc Removing unterminated mapping between port GSMTAP and system:GSMTAP.
07:03:10.025377 mtc Port GSMTAP was unmapped from system:GSMTAP.
07:03:10.025465 mtc Port GSMTAP was stopped.
07:03:10.025515 mtc Removing unterminated mapping between port BSCVTY and system:BSCVTY.
07:03:10.025687 mtc Port BSCVTY was unmapped from system:BSCVTY.
07:03:10.025784 mtc Port BSCVTY was stopped.
07:03:10.025864 mtc Component type Test.dummy_CT was shut down inside testcase TC_radio_link_timeout.
07:03:10.025910 mtc Waiting for PTCs to finish.
07:03:10.026011 mtc Setting final verdict of the test case.
07:03:10.026071 mtc Local verdict of MTC: error
07:03:10.026122 mtc No PTCs were created.
07:03:10.026165 mtc Test case TC_radio_link_timeout finished. Verdict: error
07:03:10.026647 mtc Verdict statistics: 0 none (0.00 %), 3 pass (13.64 %), 0 inconc (0.00 %), 3 fail (13.64 %), 16 error (72.73 %).
07:03:10.026783 mtc Test execution summary: 22 test cases were executed. Overall verdict: error
07:03:10.026827 mtc Exit was requested from MC. Terminating MTC.
07:03:10.027767 hc Exit was requested from MC. Terminating HC.
07:03:10.028164 hc Disconnected from MC.
07:03:10.028240 hc TTCN-3 Host Controller finished.
+ docker container stop jenkins-ttcn3-nitb-sysinfo-191-bts
Error response from daemon: No such container: jenkins-ttcn3-nitb-sysinfo-191-bts
+ docker container stop jenkins-ttcn3-nitb-sysinfo-191-nitb
jenkins-ttcn3-nitb-sysinfo-191-nitb
+ docker run --rm -v ttcn3-nitb-sysinfo-vol:/ttcn3-nitb-sysinfo -v nitb-vol:/nitb -v bts-vol:/bts --name jenkins-ttcn3-nitb-sysinfo-191-sysinfo-helper -d busybox /bin/sh -c sleep 1000 & wait
982ba32847f7a1cee38104ec0d68e4a391a7d4690e7b826b064ffa56f7cdc9e9
+ rm -rf /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ mkdir -p /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ docker cp jenkins-ttcn3-nitb-sysinfo-191-sysinfo-helper:/ttcn3-nitb-sysinfo /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ docker cp jenkins-ttcn3-nitb-sysinfo-191-sysinfo-helper:/nitb /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ docker cp jenkins-ttcn3-nitb-sysinfo-191-sysinfo-helper:/bts /home/osmocom-build/jenkins/workspace/ttcn3-nitb-sysinfo/logs
+ docker container stop -t 0 jenkins-ttcn3-nitb-sysinfo-191-sysinfo-helper
jenkins-ttcn3-nitb-sysinfo-191-sysinfo-helper
+ network_remove
+ echo Removing network ttcn3-nitb-sysinfo
Removing network ttcn3-nitb-sysinfo
+ docker network remove ttcn3-nitb-sysinfo
ttcn3-nitb-sysinfo
Recording test results
Build step 'Publish JUnit test result report' changed build result to UNSTABLE
Sending e-mails to: laforge@gnumonks.org
Finished: UNSTABLE