+ base=/build
+ deps=/build/deps
+ inst=/build/deps/install
+ export deps inst
+ osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
+ git clean -dxf
+ [ -d /build/deps ]
+ [ -d layer1-headers ]
+ mkdir /build/deps
+ osmo-build-dep.sh libosmocore '' '--disable-doxygen --enable-gnutls'
=============================== libosmocore ===============================
+ mkdir -p /build/deps
+ cd /build/deps
+ osmo-deps.sh libosmocore
+ project=libosmocore
+ branch=master
+ git branch -a
+ grep -c remotes/origin/master$
+ [ x1 != x0 ]
+ branch=origin/master
+ test -d libosmocore
+ osmo_git_clone_url libosmocore
+ echo https://gerrit.osmocom.org/libosmocore
+ git clone https://gerrit.osmocom.org/libosmocore libosmocore
Cloning into 'libosmocore'...
+ cd libosmocore
+ git fetch --tags origin
+ git fetch origin
+ deps= osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
Your branch is up to date with 'origin/master'.
+ git clean -dxf
+ [ -d ]
+ [ -d layer1-headers ]
+ git checkout -f origin/master
Note: switching to 'origin/master'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 99750d5c osmo_io: Add iofd param to segmentation_cb
+ git rev-parse HEAD
99750d5cae843e01180bc0baeafc06da78d1b0b7
+ cd libosmocore
+ mkdir -p /build/deps/install/stow
+ osmo_source_subdir libosmocore
+ subdir=
+ [ -n ]
+ autoreconf --install --force
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:70: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:70: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:70: the top level
configure.ac:84: warning: $as_echo is obsolete; use AS_ECHO(["message"]) instead
lib/m4sugar/m4sh.m4:692: _AS_IF_ELSE is expanded from...
lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from...
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from...
m4/ax_pthread.m4:88: AX_PTHREAD is expanded from...
configure.ac:84: the top level
configure.ac:174: warning: The macro `AC_CONFIG_HEADER' is obsolete.
configure.ac:174: You should run autoupdate.
./lib/autoconf/status.m4:719: AC_CONFIG_HEADER is expanded from...
configure.ac:174: the top level
configure.ac:462: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:462: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:462: the top level
configure.ac:602: warning: AC_OUTPUT should be used without arguments.
configure.ac:602: You should run autoupdate.
configure.ac:23: installing './compile'
configure.ac:25: installing './config.guess'
configure.ac:25: installing './config.sub'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
Makefile.am:64: warning: DOXYGEN was already defined in condition TRUE, which includes condition !HAVE_DOXYGEN ...
configure.ac:116: ... 'DOXYGEN' previously defined here
src/codec/Makefile.am: installing './depcomp'
+ ./configure --prefix=/build/deps/install/stow/libosmocore --with-systemdsystemunitdir=/build/deps/install/stow/libosmocore/lib/systemd/system --disable-doxygen --enable-gnutls
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for egrep... (cached) /usr/bin/grep -E
checking for execinfo.h... yes
checking for poll.h... yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/signalfd.h... yes
checking for sys/eventfd.h... yes
checking for sys/timerfd.h... yes
checking for syslog.h... yes
checking for ctype.h... yes
checking for netinet/tcp.h... yes
checking for netinet/in.h... yes
checking for gcc options needed to detect all undeclared functions... none needed
checking whether HAVE_SYS_SOCKET_H is declared... yes
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for library containing dlopen... none required
checking for library containing dlsym... none required
checking for backtrace in -lexecinfo... no
checking how to run the C preprocessor... gcc -E
checking whether gcc is Clang... no
checking whether pthreads work with -pthread... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking whether more special flags are required for pthreads... no
checking for PTHREAD_PRIO_INHERIT... yes
checking for pthread_getname_np(pthread_t, char*, size_t)... yes
checking for library containing clock_gettime... none required
checking for doxygen... /usr/bin/doxygen
checking whether SYS_getrandom is declared... yes
checking if gcc supports -fvisibility=hidden... yes
checking for localtime_r... yes
checking whether struct tm has tm_gmtoff member... yes
checking for gettid... yes
checking whether to workaround TLS bug in old gcc on ARM platforms...
checking for talloc >= 2.1.0... yes
checking for liburing >= 0.7... yes
checking for libpcsclite... yes
checking for libusb-1.0... yes
checking for gnutls >= 2.12.0... yes
checking for libmnl... yes
checking for libsctp... yes
checking whether to enable VTY/CTRL tests... no
checking whether C compiler accepts -mavx2... yes
checking whether C compiler accepts -mssse3... yes
checking whether C compiler accepts -msse4.1... yes
checking whether to enable ARM NEON instructions support... no
checking whether to include systemtap tracing support... no
checking whether to build with code coverage support... no
checking whether gcc has __builtin_cpu_supports built-in... yes
checking for struct tcp_info.tcpi_notsent_bytes... yes
checking for struct tcp_info.tcpi_rwnd_limited... yes
checking for struct tcp_info.tcpi_sndbuf_limited... yes
checking for struct tcp_info.tcpi_reord_seen... yes
CFLAGS=" -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall"
CPPFLAGS=" -DBUILDING_LIBOSMOCORE -Wall"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmocore.pc
config.status: creating libosmocodec.pc
config.status: creating libosmocoding.pc
config.status: creating libosmovty.pc
config.status: creating libosmogsm.pc
config.status: creating libosmoisdn.pc
config.status: creating libosmogb.pc
config.status: creating libosmoctrl.pc
config.status: creating libosmosim.pc
config.status: creating libosmousb.pc
config.status: creating include/Makefile
config.status: creating include/osmocom/Makefile
config.status: creating include/osmocom/codec/Makefile
config.status: creating include/osmocom/coding/Makefile
config.status: creating include/osmocom/core/Makefile
config.status: creating include/osmocom/crypt/Makefile
config.status: creating include/osmocom/ctrl/Makefile
config.status: creating include/osmocom/gprs/Makefile
config.status: creating include/osmocom/gprs/protocol/Makefile
config.status: creating include/osmocom/gsm/Makefile
config.status: creating include/osmocom/gsm/protocol/Makefile
config.status: creating include/osmocom/isdn/Makefile
config.status: creating include/osmocom/sim/Makefile
config.status: creating include/osmocom/usb/Makefile
config.status: creating include/osmocom/vty/Makefile
config.status: creating src/Makefile
config.status: creating src/core/Makefile
config.status: creating src/vty/Makefile
config.status: creating src/codec/Makefile
config.status: creating src/coding/Makefile
config.status: creating src/sim/Makefile
config.status: creating src/usb/Makefile
config.status: creating src/gsm/Makefile
config.status: creating src/isdn/Makefile
config.status: creating src/gb/Makefile
config.status: creating src/ctrl/Makefile
config.status: creating src/pseudotalloc/Makefile
config.status: creating tapset/Makefile
config.status: creating tests/Makefile
config.status: creating tests/atlocal
config.status: creating utils/Makefile
config.status: creating utils/osmo-stat-dummy/Makefile
config.status: creating Doxyfile.core
config.status: creating Doxyfile.gsm
config.status: creating Doxyfile.isdn
config.status: creating Doxyfile.vty
config.status: creating Doxyfile.codec
config.status: creating Doxyfile.coding
config.status: creating Doxyfile.gb
config.status: creating Doxyfile.ctrl
config.status: creating Doxyfile.sim
config.status: creating Doxyfile.usb
config.status: creating Makefile
config.status: creating contrib/libosmocore.spec
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
+ [ -n ]
+ make -j 12 install
echo 1.9.0.196-9975 > .version-t && mv .version-t .version
make install-recursive
make[1]: Entering directory '/build/deps/libosmocore'
Making install in include
make[2]: Entering directory '/build/deps/libosmocore/include'
Making install in osmocom
make[3]: Entering directory '/build/deps/libosmocore/include/osmocom'
Making install in core
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/core'
GEN bit16gen.h
GEN bit32gen.h
GEN bit64gen.h
GEN crc16gen.h
GEN crc32gen.h
GEN crc64gen.h
GEN crc8gen.h
GEN bit16gen.h
GEN bit32gen.h
GEN socket_compat.h
GEN bit64gen.h
GEN crc32gen.h
GEN crc16gen.h
GEN crc64gen.h
GEN crc8gen.h
GEN socket_compat.h
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/core'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/core'
/usr/bin/install -c -m 644 application.h backtrace.h base64.h bit16gen.h bit32gen.h bit64gen.h bits.h bitvec.h bitcomp.h byteswap.h conv.h counter.h crc16.h crc16gen.h crc32gen.h crc64gen.h crc8gen.h crcgen.h endian.h defs.h exec.h fsm.h gsmtap.h gsmtap_util.h hash.h hashtable.h isdnhdlc.h it_q.h linuxlist.h linuxrbtree.h log2.h logging.h loggingrb.h stats.h macaddr.h msgb.h netdev.h netns.h osmo_io.h panic.h '/build/deps/install/stow/libosmocore/include/osmocom/core'
/usr/bin/install -c -m 644 prbs.h prim.h process.h rate_ctr.h stat_item.h stats_tcp.h select.h sercomm.h signal.h socket.h statistics.h strrb.h talloc.h tdef.h thread.h timer.h timer_compat.h tun.h utils.h write_queue.h sockaddr_str.h soft_uart.h time_cc.h use_count.h socket_compat.h plugin.h msgfile.h serial.h mnl.h '/build/deps/install/stow/libosmocore/include/osmocom/core'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/core'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/core'
Making install in vty
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/vty'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/vty'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/vty'
/usr/bin/install -c -m 644 buffer.h command.h logging.h stats.h misc.h telnet_interface.h vector.h vty.h ports.h cpu_sched_vty.h tdef_vty.h '/build/deps/install/stow/libosmocore/include/osmocom/vty'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/vty'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/vty'
Making install in codec
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/codec'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/codec'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/codec'
/usr/bin/install -c -m 644 ecu.h codec.h gsm610_bits.h '/build/deps/install/stow/libosmocore/include/osmocom/codec'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/codec'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/codec'
Making install in gsm
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/gsm'
GEN gsm0503.h
Generating header file...
Generate 'xcch' declaration
Generate 'tch_f24' declaration
Generate 'tch_h24' declaration
Generate 'tch_f48' declaration
Generate 'tch_f96' declaration
Generate 'tch_f144' declaration
Generate 'rach' declaration
Generate 'rach_ext' declaration
Generate 'sch' declaration
Generate 'cs2' declaration
Generate 'cs3' declaration
Generate 'cs2_np' declaration
Generate 'cs3_np' declaration
Generate 'tch_afs_12_2' declaration
Generate 'tch_afs_10_2' declaration
Generate 'tch_afs_7_95' declaration
Generate 'tch_afs_7_4' declaration
Generate 'tch_afs_6_7' declaration
Generate 'tch_afs_5_9' declaration
Generate 'tch_afs_5_15' declaration
Generate 'tch_afs_4_75' declaration
Generate 'tch_fr' declaration
Generate 'tch_hr' declaration
Generate 'tch_ahs_7_95' declaration
Generate 'tch_ahs_7_4' declaration
Generate 'tch_ahs_6_7' declaration
Generate 'tch_ahs_5_9' declaration
Generate 'tch_ahs_5_15' declaration
Generate 'tch_ahs_4_75' declaration
Generate 'tch_axs_sid_update' declaration
Generate 'mcs1_dl_hdr' declaration
Generate 'mcs1_ul_hdr' declaration
Generate 'mcs1' declaration
Generate 'mcs2' declaration
Generate 'mcs3' declaration
Generate 'mcs4' declaration
Generate 'mcs5_dl_hdr' declaration
Generate 'mcs5_ul_hdr' declaration
Generate 'mcs5' declaration
Generate 'mcs6' declaration
Generate 'mcs7_dl_hdr' declaration
Generate 'mcs7_ul_hdr' declaration
Generate 'mcs7' declaration
Generate 'mcs8' declaration
Generate 'mcs9' declaration
Generation complete.
make install-recursive
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/gsm'
Making install in protocol
make[6]: Entering directory '/build/deps/libosmocore/include/osmocom/gsm/protocol'
make[7]: Entering directory '/build/deps/libosmocore/include/osmocom/gsm/protocol'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/gsm/protocol'
/usr/bin/install -c -m 644 gsm_23_032.h gsm_03_40.h gsm_03_41.h gsm_04_08.h gsm_04_08_gprs.h gsm_04_11.h gsm_04_12.h gsm_04_14.h gsm_04_80.h gsm_08_08.h gsm_08_58.h gsm_09_02.h gsm_12_21.h gsm_23_003.h gsm_23_041.h gsm_25_415.h gsm_29_118.h gsm_44_004.h gsm_44_060.h gsm_44_068.h gsm_44_318.h gsm_48_049.h gsm_48_071.h gsm_49_031.h ipaccess.h smpp34_osmocom.h '/build/deps/install/stow/libosmocore/include/osmocom/gsm/protocol'
make[7]: Leaving directory '/build/deps/libosmocore/include/osmocom/gsm/protocol'
make[6]: Leaving directory '/build/deps/libosmocore/include/osmocom/gsm/protocol'
make[6]: Entering directory '/build/deps/libosmocore/include/osmocom/gsm'
make[7]: Entering directory '/build/deps/libosmocore/include/osmocom/gsm'
make[7]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/gsm'
/usr/bin/install -c -m 644 a5.h abis_nm.h apn.h bts_features.h cbsp.h comp128.h comp128v23.h bitvec_gsm.h gan.h gsm0341.h gsm0411_smc.h gsm0411_smr.h gsm0411_utils.h gsm0480.h gsm0502.h gsm0503.h bsslap.h bssmap_le.h gad.h gsm0808.h gsm0808_lcs.h gsm29205.h gsm0808_utils.h gsm23003.h gsm23236.h gsm29118.h gsm44021.h gsm48.h gsm48_arfcn_range_encode.h gsm48_ie.h gsm48_rest_octets.h gsm_utils.h gsup.h gsup_sms.h i460_mux.h ipa.h iuup.h lapd_core.h lapdm.h meas_rep.h '/build/deps/install/stow/libosmocore/include/osmocom/gsm'
/usr/bin/install -c -m 644 mncc.h prim.h l1sap.h oap.h oap_client.h rlp.h rsl.h rxlev_stat.h sysinfo.h tlv.h '/build/deps/install/stow/libosmocore/include/osmocom/gsm'
make[7]: Leaving directory '/build/deps/libosmocore/include/osmocom/gsm'
make[6]: Leaving directory '/build/deps/libosmocore/include/osmocom/gsm'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/gsm'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/gsm'
Making install in isdn
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/isdn'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/isdn'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/isdn'
/usr/bin/install -c -m 644 i460_mux.h lapd_core.h v110.h v110_ta.h '/build/deps/install/stow/libosmocore/include/osmocom/isdn'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/isdn'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/isdn'
Making install in crypt
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/crypt'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/crypt'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/crypt'
/usr/bin/install -c -m 644 auth.h gprs_cipher.h kdf.h utran_cipher.h '/build/deps/install/stow/libosmocore/include/osmocom/crypt'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/crypt'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/crypt'
Making install in coding
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/coding'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/coding'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/coding'
/usr/bin/install -c -m 644 gsm0503_tables.h gsm0503_parity.h gsm0503_mapping.h gsm0503_interleaving.h gsm0503_coding.h gsm0503_amr_dtx.h '/build/deps/install/stow/libosmocore/include/osmocom/coding'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/coding'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/coding'
Making install in gprs
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/gprs'
Making install in protocol
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/gprs/protocol'
make[6]: Entering directory '/build/deps/libosmocore/include/osmocom/gprs/protocol'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/gprs/protocol'
/usr/bin/install -c -m 644 gsm_04_60.h gsm_08_16.h gsm_08_18.h gsm_24_301.h '/build/deps/install/stow/libosmocore/include/osmocom/gprs/protocol'
make[6]: Leaving directory '/build/deps/libosmocore/include/osmocom/gprs/protocol'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/gprs/protocol'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/gprs'
make[6]: Entering directory '/build/deps/libosmocore/include/osmocom/gprs'
make[6]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/gprs'
/usr/bin/install -c -m 644 frame_relay.h bssgp_bvc_fsm.h gprs_bssgp.h gprs_bssgp2.h gprs_bssgp_bss.h gprs_bssgp_rim.h gprs_msgb.h gprs_ns.h gprs_ns_frgre.h gprs_ns2.h gprs_rlc.h '/build/deps/install/stow/libosmocore/include/osmocom/gprs'
make[6]: Leaving directory '/build/deps/libosmocore/include/osmocom/gprs'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/gprs'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/gprs'
Making install in ctrl
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/ctrl'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/ctrl'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/ctrl'
/usr/bin/install -c -m 644 control_cmd.h control_if.h ports.h control_vty.h '/build/deps/install/stow/libosmocore/include/osmocom/ctrl'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/ctrl'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/ctrl'
Making install in sim
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/sim'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/sim'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/sim'
/usr/bin/install -c -m 644 class_tables.h sim.h '/build/deps/install/stow/libosmocore/include/osmocom/sim'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/sim'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/sim'
Making install in usb
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom/usb'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom/usb'
make[5]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include/osmocom/usb'
/usr/bin/install -c -m 644 libusb.h '/build/deps/install/stow/libosmocore/include/osmocom/usb'
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom/usb'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom/usb'
make[4]: Entering directory '/build/deps/libosmocore/include/osmocom'
make[5]: Entering directory '/build/deps/libosmocore/include/osmocom'
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '/build/deps/libosmocore/include/osmocom'
make[4]: Leaving directory '/build/deps/libosmocore/include/osmocom'
make[3]: Leaving directory '/build/deps/libosmocore/include/osmocom'
make[3]: Entering directory '/build/deps/libosmocore/include'
make[4]: Entering directory '/build/deps/libosmocore/include'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/libosmocore/include'
make[3]: Leaving directory '/build/deps/libosmocore/include'
make[2]: Leaving directory '/build/deps/libosmocore/include'
Making install in src
make[2]: Entering directory '/build/deps/libosmocore/src'
Making install in core
make[3]: Entering directory '/build/deps/libosmocore/src/core'
GEN crc8gen.c
GEN crc16gen.c
GEN crc32gen.c
GEN crc64gen.c
make install-am
make[4]: Entering directory '/build/deps/libosmocore/src/core'
CC application.lo
CC backtrace.lo
CC base64.lo
CC bits.lo
CC bitvec.lo
CC context.lo
CC bitcomp.lo
CC conv.lo
CC conv_acc.lo
CC conv_acc_generic.lo
CC counter.lo
CC crc16.lo
CC crc8gen.lo
CC crc16gen.lo
CC crc32gen.lo
CC crc64gen.lo
CC exec.lo
CC fsm.lo
CC gsmtap_util.lo
CC isdnhdlc.lo
CC it_q.lo
CC logging.lo
CC logging_syslog.lo
CC logging_gsmtap.lo
CC loggingrb.lo
CC macaddr.lo
CC msgb.lo
CC netdev.lo
CC netns.lo
CC osmo_io.lo
CC osmo_io_poll.lo
CC panic.lo
CC prbs.lo
CC prim.lo
CC rate_ctr.lo
CC rbtree.lo
CC select.lo
CC sercomm.lo
CC signal.lo
CC sockaddr_str.lo
CC socket.lo
CC soft_uart.lo
CC stat_item.lo
CC stats.lo
CC stats_statsd.lo
CC stats_tcp.lo
CC strrb.lo
CC tdef.lo
CC thread.lo
CC time_cc.lo
CC timer.lo
CC timer_gettimeofday.lo
CC timer_clockgettime.lo
CC tun.lo
CC utils.lo
CC use_count.lo
CC conv_acc_sse.lo
CC write_queue.lo
CC conv_acc_sse_avx.lo
CC plugin.lo
CC msgfile.lo
CC serial.lo
CC mnl.lo
CC osmo_io_uring.lo
CCLD libosmocore.la
make[5]: Entering directory '/build/deps/libosmocore/src/core'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocore.la '/build/deps/install/stow/libosmocore/lib'
libtool: install: /usr/bin/install -c .libs/libosmocore.so.21.0.0 /build/deps/install/stow/libosmocore/lib/libosmocore.so.21.0.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocore.so.21.0.0 libosmocore.so.21 || { rm -f libosmocore.so.21 && ln -s libosmocore.so.21.0.0 libosmocore.so.21; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocore.so.21.0.0 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.21.0.0 libosmocore.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocore.lai /build/deps/install/stow/libosmocore/lib/libosmocore.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[5]: Leaving directory '/build/deps/libosmocore/src/core'
make[4]: Leaving directory '/build/deps/libosmocore/src/core'
make[3]: Leaving directory '/build/deps/libosmocore/src/core'
Making install in vty
make[3]: Entering directory '/build/deps/libosmocore/src/vty'
CC buffer.lo
CC command.lo
CC vty.lo
CC vector.lo
CC utils.lo
CC telnet_interface.lo
CC logging_vty.lo
CC stats_vty.lo
CC fsm_vty.lo
CC talloc_ctx_vty.lo
CC cpu_sched_vty.lo
CC tdef_vty.lo
CCLD libosmovty.la
make[4]: Entering directory '/build/deps/libosmocore/src/vty'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmovty.la'
libtool: install: (cd /build/deps/libosmocore/src/vty; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -pthread -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 13:0:0 -no-undefined -o libosmovty.la -rpath /build/deps/install/stow/libosmocore/lib buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo cpu_sched_vty.lo tdef_vty.lo ../../src/core/libosmocore.la -ltalloc )
libtool: install: /usr/bin/install -c .libs/libosmovty.so.13.0.0T /build/deps/install/stow/libosmocore/lib/libosmovty.so.13.0.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmovty.so.13.0.0 libosmovty.so.13 || { rm -f libosmovty.so.13 && ln -s libosmovty.so.13.0.0 libosmovty.so.13; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmovty.so.13.0.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.13.0.0 libosmovty.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmovty.lai /build/deps/install/stow/libosmocore/lib/libosmovty.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/vty'
make[3]: Leaving directory '/build/deps/libosmocore/src/vty'
Making install in isdn
make[3]: Entering directory '/build/deps/libosmocore/src/isdn'
CC i460_mux.lo
CC lapd_core.lo
CC v110.lo
CC v110_ta.lo
CCLD libisdnint.la
CCLD libosmoisdn.la
make[4]: Entering directory '/build/deps/libosmocore/src/isdn'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmoisdn.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmoisdn.la'
libtool: install: (cd /build/deps/libosmocore/src/isdn; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmoisdn.map -version-info 1:0:1 -no-undefined -o libosmoisdn.la -rpath /build/deps/install/stow/libosmocore/lib libisdnint.la -ltalloc )
libtool: install: /usr/bin/install -c .libs/libosmoisdn.so.0.1.0T /build/deps/install/stow/libosmocore/lib/libosmoisdn.so.0.1.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmoisdn.so.0.1.0 libosmoisdn.so.0 || { rm -f libosmoisdn.so.0 && ln -s libosmoisdn.so.0.1.0 libosmoisdn.so.0; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmoisdn.so.0.1.0 libosmoisdn.so || { rm -f libosmoisdn.so && ln -s libosmoisdn.so.0.1.0 libosmoisdn.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoisdn.lai /build/deps/install/stow/libosmocore/lib/libosmoisdn.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/isdn'
make[3]: Leaving directory '/build/deps/libosmocore/src/isdn'
Making install in codec
make[3]: Entering directory '/build/deps/libosmocore/src/codec'
CC gsm610.lo
CC gsm620.lo
CC gsm660.lo
CC gsm690.lo
CC ecu.lo
CC ecu_fr.lo
CC ecu_fr_old.lo
CCLD libosmocodec.la
make[4]: Entering directory '/build/deps/libosmocore/src/codec'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmocodec.la'
libtool: install: (cd /build/deps/libosmocore/src/codec; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 4:0:0 -no-undefined -o libosmocodec.la -rpath /build/deps/install/stow/libosmocore/lib gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu.lo ecu_fr.lo ecu_fr_old.lo ../../src/core/libosmocore.la )
libtool: install: /usr/bin/install -c .libs/libosmocodec.so.4.0.0T /build/deps/install/stow/libosmocore/lib/libosmocodec.so.4.0.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocodec.so.4.0.0 libosmocodec.so.4 || { rm -f libosmocodec.so.4 && ln -s libosmocodec.so.4.0.0 libosmocodec.so.4; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocodec.so.4.0.0 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.4.0.0 libosmocodec.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocodec.lai /build/deps/install/stow/libosmocore/lib/libosmocodec.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/codec'
make[3]: Leaving directory '/build/deps/libosmocore/src/codec'
Making install in gsm
make[3]: Entering directory '/build/deps/libosmocore/src/gsm'
GEN gsm0503_conv.c
Generating convolutional codes...
Generate 'xcch' definition
Generate 'tch_f24' definition
Generate 'tch_h24' definition
Generate 'tch_f48' definition
Generate 'tch_f96' definition
Generate 'tch_f144' definition
Generate 'rach' definition
Generate 'rach_ext' definition
Generate 'sch' definition
Generate 'cs2' definition
Generate 'cs3' definition
Generate 'cs2_np' definition
Generate 'cs3_np' definition
Generate 'tch_afs_12_2' definition
Generate 'tch_afs_10_2' definition
Generate 'tch_afs_7_95' definition
Generate 'tch_afs_7_4' definition
Generate 'tch_afs_6_7' definition
Generate 'tch_afs_5_9' definition
Generate 'tch_afs_5_15' definition
Generate 'tch_afs_4_75' definition
Generate 'tch_fr' definition
Generate 'tch_hr' definition
Generate 'tch_ahs_7_95' definition
Generate 'tch_ahs_7_4' definition
Generate 'tch_ahs_6_7' definition
Generate 'tch_ahs_5_9' definition
Generate 'tch_ahs_5_15' definition
Generate 'tch_ahs_4_75' definition
Generate 'tch_axs_sid_update' definition
Generate 'mcs1_dl_hdr' definition
Generate 'mcs1_ul_hdr' definition
Generate 'mcs1' definition
Generate 'mcs2' definition
Generate 'mcs3' definition
Generate 'mcs4' definition
Generate 'mcs5_dl_hdr' definition
Generate 'mcs5_ul_hdr' definition
Generate 'mcs5' definition
Generate 'mcs6' definition
Generate 'mcs7_dl_hdr' definition
Generate 'mcs7_ul_hdr' definition
Generate 'mcs7' definition
Generate 'mcs8' definition
Generate 'mcs9' definition
Generation complete.
make install-am
make[4]: Entering directory '/build/deps/libosmocore/src/gsm'
CC a5.lo
CC rxlev_stat.lo
CC tlv_parser.lo
CC comp128.lo
CC gsm_utils.lo
CC comp128v23.lo
CC rsl.lo
CC gsm48.lo
CC gsm48_arfcn_range_encode.lo
CC gsm48_ie.lo
CC gsm0808.lo
CC sysinfo.lo
gsm_utils.c:106:9: note: '#pragma message: glibc 2.36 random detected'
106 | #pragma message ("glibc " OSMO_STRINGIFY_VAL(__GLIBC__) "." OSMO_STRINGIFY_VAL(__GLIBC_MINOR__) " random detected")
| ^~~~~~~
CC gprs_cipher_core.lo
CC gprs_rlc.lo
CC gsm0480.lo
CC abis_nm.lo
CC gsm0502.lo
CC gsm0411_utils.lo
CC gsm0411_smc.lo
CC gsm0414.lo
CC gsm0411_smr.lo
CC lapdm.lo
CC kasumi.lo
CC gsm29205.lo
CC gsm_04_08_gprs.lo
CC auth_core.lo
CC auth_comp128v1.lo
CC auth_comp128v23.lo
CC auth_xor.lo
CC auth_xor_2g.lo
CC auth_milenage.lo
CC gea.lo
CC gan.lo
CC ipa.lo
CC gsm0341.lo
CC apn.lo
CC auth_tuak.lo
CC gprs_gea.lo
CC oap.lo
CC gsm0503_conv.lo
CC gsm0808_utils.lo
CC gsm23003.lo
CC mncc.lo
CC gsm23236.lo
CC bts_features.lo
CC oap_client.lo
CC gsm29118.lo
CC gsm48_rest_octets.lo
CC cbsp.lo
CC gsm48049.lo
CC gad.lo
CC bsslap.lo
CC bssmap_le.lo
CC kdf.lo
CC iuup.lo
CC gsm44021.lo
CC gsm44068.lo
CC gsup.lo
CC rlp.lo
CC gsup_sms.lo
CC milenage/aes-encblock.lo
CC milenage/aes-internal.lo
CC milenage/aes-internal-enc.lo
CC milenage/milenage.lo
CC tuak/KeccakP-1600-3gpp.lo
CC tuak/tuak.lo
CCLD libgsmint.la
CCLD libosmogsm.la
make[5]: Entering directory '/build/deps/libosmocore/src/gsm'
make[5]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogsm.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmogsm.la'
libtool: install: (cd /build/deps/libosmocore/src/gsm; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -I/usr/include/p11-kit-1 -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogsm.map -version-info 20:0:0 -no-undefined -o libosmogsm.la -rpath /build/deps/install/stow/libosmocore/lib libgsmint.la -ltalloc -lgnutls )
libtool: install: /usr/bin/install -c .libs/libosmogsm.so.20.0.0T /build/deps/install/stow/libosmocore/lib/libosmogsm.so.20.0.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmogsm.so.20.0.0 libosmogsm.so.20 || { rm -f libosmogsm.so.20 && ln -s libosmogsm.so.20.0.0 libosmogsm.so.20; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmogsm.so.20.0.0 libosmogsm.so || { rm -f libosmogsm.so && ln -s libosmogsm.so.20.0.0 libosmogsm.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmogsm.lai /build/deps/install/stow/libosmocore/lib/libosmogsm.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[5]: Leaving directory '/build/deps/libosmocore/src/gsm'
make[4]: Leaving directory '/build/deps/libosmocore/src/gsm'
make[3]: Leaving directory '/build/deps/libosmocore/src/gsm'
Making install in coding
make[3]: Entering directory '/build/deps/libosmocore/src/coding'
CC gsm0503_interleaving.lo
CC gsm0503_mapping.lo
CC gsm0503_tables.lo
CC gsm0503_parity.lo
CC gsm0503_coding.lo
CC gsm0503_amr_dtx.lo
CCLD libosmocoding.la
make[4]: Entering directory '/build/deps/libosmocore/src/coding'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocoding.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmocoding.la'
libtool: install: (cd /build/deps/libosmocore/src/coding; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmocoding.map -version-info 3:0:3 -no-undefined -o libosmocoding.la -rpath /build/deps/install/stow/libosmocore/lib gsm0503_interleaving.lo gsm0503_mapping.lo gsm0503_tables.lo gsm0503_parity.lo gsm0503_coding.lo gsm0503_amr_dtx.lo ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/codec/libosmocodec.la )
libtool: install: /usr/bin/install -c .libs/libosmocoding.so.0.3.0T /build/deps/install/stow/libosmocore/lib/libosmocoding.so.0.3.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocoding.so.0.3.0 libosmocoding.so.0 || { rm -f libosmocoding.so.0 && ln -s libosmocoding.so.0.3.0 libosmocoding.so.0; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmocoding.so.0.3.0 libosmocoding.so || { rm -f libosmocoding.so && ln -s libosmocoding.so.0.3.0 libosmocoding.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocoding.lai /build/deps/install/stow/libosmocore/lib/libosmocoding.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/coding'
make[3]: Leaving directory '/build/deps/libosmocore/src/coding'
Making install in gb
make[3]: Entering directory '/build/deps/libosmocore/src/gb'
CC gprs_ns.lo
CC gprs_ns_frgre.lo
CC gprs_ns_vty.lo
CC gprs_ns_sns.lo
CC gprs_bssgp_util.lo
CC gprs_bssgp_vty.lo
CC gprs_bssgp.lo
CC gprs_bssgp_rim.lo
CC gprs_bssgp_bss.lo
CC gprs_ns2.lo
CC gprs_ns2_udp.lo
CC gprs_ns2_frgre.lo
CC gprs_ns2_fr.lo
CC gprs_ns2_vc_fsm.lo
CC gprs_ns2_sns.lo
CC gprs_ns2_vty.lo
CC gprs_ns2_message.lo
CC gprs_bssgp2.lo
CC common_vty.lo
CC bssgp_bvc_fsm.lo
CC frame_relay.lo
CCLD libosmogb.la
CCLD libosmogb-test.la
make[4]: Entering directory '/build/deps/libosmocore/src/gb'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogb.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmogb.la'
libtool: install: (cd /build/deps/libosmocore/src/gb; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -fno-strict-aliasing -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogb.map -version-info 16:0:2 -no-undefined -o libosmogb.la -rpath /build/deps/install/stow/libosmocore/lib gprs_ns.lo gprs_ns_frgre.lo gprs_ns_vty.lo gprs_ns_sns.lo gprs_bssgp.lo gprs_bssgp_util.lo gprs_bssgp_vty.lo gprs_bssgp_rim.lo gprs_bssgp_bss.lo gprs_ns2.lo gprs_ns2_udp.lo gprs_ns2_frgre.lo gprs_ns2_fr.lo gprs_ns2_vc_fsm.lo gprs_ns2_sns.lo gprs_ns2_message.lo gprs_ns2_vty.lo gprs_bssgp2.lo bssgp_bvc_fsm.lo common_vty.lo frame_relay.lo -ltalloc ../../src/core/libosmocore.la ../../src/vty/libosmovty.la ../../src/gsm/libosmogsm.la )
libtool: install: /usr/bin/install -c .libs/libosmogb.so.14.2.0T /build/deps/install/stow/libosmocore/lib/libosmogb.so.14.2.0
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmogb.so.14.2.0 libosmogb.so.14 || { rm -f libosmogb.so.14 && ln -s libosmogb.so.14.2.0 libosmogb.so.14; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmogb.so.14.2.0 libosmogb.so || { rm -f libosmogb.so && ln -s libosmogb.so.14.2.0 libosmogb.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmogb.lai /build/deps/install/stow/libosmocore/lib/libosmogb.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/gb'
make[3]: Leaving directory '/build/deps/libosmocore/src/gb'
Making install in ctrl
make[3]: Entering directory '/build/deps/libosmocore/src/ctrl'
CC control_cmd.lo
CC fsm_ctrl_commands.lo
CC control_if.lo
CC control_vty.lo
CCLD libosmoctrl.la
make[4]: Entering directory '/build/deps/libosmocore/src/ctrl'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmoctrl.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmoctrl.la'
libtool: install: (cd /build/deps/libosmocore/src/ctrl; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmoctrl.map -version-info 8:1:8 -no-undefined -o libosmoctrl.la -rpath /build/deps/install/stow/libosmocore/lib control_cmd.lo control_if.lo fsm_ctrl_commands.lo control_vty.lo -ltalloc ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/vty/libosmovty.la )
libtool: install: /usr/bin/install -c .libs/libosmoctrl.so.0.8.1T /build/deps/install/stow/libosmocore/lib/libosmoctrl.so.0.8.1
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmoctrl.so.0.8.1 libosmoctrl.so.0 || { rm -f libosmoctrl.so.0 && ln -s libosmoctrl.so.0.8.1 libosmoctrl.so.0; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmoctrl.so.0.8.1 libosmoctrl.so || { rm -f libosmoctrl.so && ln -s libosmoctrl.so.0.8.1 libosmoctrl.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoctrl.lai /build/deps/install/stow/libosmocore/lib/libosmoctrl.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/ctrl'
make[3]: Leaving directory '/build/deps/libosmocore/src/ctrl'
Making install in pseudotalloc
make[3]: Entering directory '/build/deps/libosmocore/src/pseudotalloc'
make[4]: Entering directory '/build/deps/libosmocore/src/pseudotalloc'
make[4]: Leaving directory '/build/deps/libosmocore/src/pseudotalloc'
make[3]: Leaving directory '/build/deps/libosmocore/src/pseudotalloc'
Making install in sim
make[3]: Entering directory '/build/deps/libosmocore/src/sim'
CC core.lo
CC reader.lo
CC class_tables.lo
CC card_fs_usim.lo
CC card_fs_sim.lo
CC card_fs_uicc.lo
CC card_fs_isim.lo
CC card_fs_tetra.lo
CC card_fs_hpsim.lo
CC reader_pcsc.lo
CCLD libosmosim.la
make[4]: Entering directory '/build/deps/libosmocore/src/sim'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmosim.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmosim.la'
libtool: install: (cd /build/deps/libosmocore/src/sim; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/PCSC -pthread -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 3:2:1 -no-undefined -o libosmosim.la -rpath /build/deps/install/stow/libosmocore/lib core.lo reader.lo class_tables.lo card_fs_sim.lo card_fs_usim.lo card_fs_uicc.lo card_fs_isim.lo card_fs_hpsim.lo card_fs_tetra.lo reader_pcsc.lo ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la -ltalloc -lpcsclite )
libtool: install: /usr/bin/install -c .libs/libosmosim.so.2.1.2T /build/deps/install/stow/libosmocore/lib/libosmosim.so.2.1.2
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmosim.so.2.1.2 libosmosim.so.2 || { rm -f libosmosim.so.2 && ln -s libosmosim.so.2.1.2 libosmosim.so.2; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmosim.so.2.1.2 libosmosim.so || { rm -f libosmosim.so && ln -s libosmosim.so.2.1.2 libosmosim.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmosim.lai /build/deps/install/stow/libosmocore/lib/libosmosim.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/sim'
make[3]: Leaving directory '/build/deps/libosmocore/src/sim'
Making install in usb
make[3]: Entering directory '/build/deps/libosmocore/src/usb'
CC osmo_libusb.lo
CCLD libosmousb.la
make[4]: Entering directory '/build/deps/libosmocore/src/usb'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib'
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmousb.la '/build/deps/install/stow/libosmocore/lib'
libtool: warning: relinking 'libosmousb.la'
libtool: install: (cd /build/deps/libosmocore/src/usb; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/libusb-1.0 -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 0:1:0 -no-undefined -o libosmousb.la -rpath /build/deps/install/stow/libosmocore/lib osmo_libusb.lo ../../src/core/libosmocore.la -ltalloc -lusb-1.0 )
libtool: install: /usr/bin/install -c .libs/libosmousb.so.0.0.1T /build/deps/install/stow/libosmocore/lib/libosmousb.so.0.0.1
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so.0 || { rm -f libosmousb.so.0 && ln -s libosmousb.so.0.0.1 libosmousb.so.0; }; })
libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so || { rm -f libosmousb.so && ln -s libosmousb.so.0.0.1 libosmousb.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmousb.lai /build/deps/install/stow/libosmocore/lib/libosmousb.la
libtool: finish: PATH="/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmocore/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '/build/deps/libosmocore/src/usb'
make[3]: Leaving directory '/build/deps/libosmocore/src/usb'
make[3]: Entering directory '/build/deps/libosmocore/src'
make[4]: Entering directory '/build/deps/libosmocore/src'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/libosmocore/src'
make[3]: Leaving directory '/build/deps/libosmocore/src'
make[2]: Leaving directory '/build/deps/libosmocore/src'
Making install in utils
make[2]: Entering directory '/build/deps/libosmocore/utils'
make[3]: Entering directory '/build/deps/libosmocore/utils'
CC osmo-arfcn.o
CC osmo-auc-gen.o
CC osmo-aka-verify.o
CC osmo-config-merge.o
CC gsmtap-logsend.o
CC osmo_sim_test-osmo-sim-test.o
CC osmo-ns-dummy.o
CC osmo-ns-dummy-vty.o
CCLD osmo-config-merge
CCLD osmo-auc-gen
CCLD osmo-arfcn
CCLD osmo-aka-verify
CCLD osmo-sim-test
CCLD osmo-gsmtap-logsend
CCLD osmo-ns-dummy
make[4]: Entering directory '/build/deps/libosmocore/utils'
make[4]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/bin'
/bin/bash ../libtool --mode=install /usr/bin/install -c osmo-arfcn osmo-auc-gen osmo-config-merge osmo-aka-verify osmo-gsmtap-logsend '/build/deps/install/stow/libosmocore/bin'
libtool: install: /usr/bin/install -c .libs/osmo-arfcn /build/deps/install/stow/libosmocore/bin/osmo-arfcn
libtool: install: /usr/bin/install -c .libs/osmo-auc-gen /build/deps/install/stow/libosmocore/bin/osmo-auc-gen
libtool: install: /usr/bin/install -c .libs/osmo-config-merge /build/deps/install/stow/libosmocore/bin/osmo-config-merge
libtool: install: /usr/bin/install -c .libs/osmo-aka-verify /build/deps/install/stow/libosmocore/bin/osmo-aka-verify
libtool: install: /usr/bin/install -c .libs/osmo-gsmtap-logsend /build/deps/install/stow/libosmocore/bin/osmo-gsmtap-logsend
make[4]: Leaving directory '/build/deps/libosmocore/utils'
make[3]: Leaving directory '/build/deps/libosmocore/utils'
make[2]: Leaving directory '/build/deps/libosmocore/utils'
Making install in tapset
make[2]: Entering directory '/build/deps/libosmocore/tapset'
make[3]: Entering directory '/build/deps/libosmocore/tapset'
make[3]: Nothing to be done for 'install-exec-am'.
make install-data-hook
make[4]: Entering directory '/build/deps/libosmocore/tapset'
make[4]: Nothing to be done for 'install-data-hook'.
make[4]: Leaving directory '/build/deps/libosmocore/tapset'
make[3]: Leaving directory '/build/deps/libosmocore/tapset'
make[2]: Leaving directory '/build/deps/libosmocore/tapset'
Making install in tests
make[2]: Entering directory '/build/deps/libosmocore/tests'
GEN conv/gsm0503_test_vectors.c
Generating test vectors...
Generate 'xcch' test vector
Generate 'tch_f24' test vector
Generate 'tch_h24' test vector
Generate 'tch_f48' test vector
Generate 'tch_f96' test vector
Generate 'tch_f144' test vector
Generate 'rach' test vector
Generate 'rach_ext' test vector
Generate 'sch' test vector
Generate 'cs2' test vector
Generate 'cs3' test vector
Generate 'cs2_np' test vector
Generate 'cs3_np' test vector
Generate 'tch_afs_12_2' test vector
Generate 'tch_afs_10_2' test vector
Generate 'tch_afs_7_95' test vector
Generate 'tch_afs_7_4' test vector
Generate 'tch_afs_6_7' test vector
Generate 'tch_afs_5_9' test vector
Generate 'tch_afs_5_15' test vector
Generate 'tch_afs_4_75' test vector
Generate 'tch_fr' test vector
Generate 'tch_hr' test vector
Generate 'tch_ahs_7_95' test vector
Generate 'tch_ahs_7_4' test vector
Generate 'tch_ahs_6_7' test vector
Generate 'tch_ahs_5_9' test vector
Generate 'tch_ahs_5_15' test vector
Generate 'tch_ahs_4_75' test vector
Generate 'tch_axs_sid_update' test vector
Generate 'mcs1_dl_hdr' test vector
Generate 'mcs1_ul_hdr' test vector
Generate 'mcs1' test vector
Generate 'mcs2' test vector
Generate 'mcs3' test vector
Generate 'mcs4' test vector
Generate 'mcs5_dl_hdr' test vector
Generate 'mcs5_ul_hdr' test vector
Generate 'mcs5' test vector
Generate 'mcs6' test vector
Generate 'mcs7_dl_hdr' test vector
Generate 'mcs7_ul_hdr' test vector
Generate 'mcs7' test vector
Generate 'mcs8' test vector
Generate 'mcs9' test vector
Generation complete.
make install-am
make[3]: Entering directory '/build/deps/libosmocore/tests'
make[4]: Entering directory '/build/deps/libosmocore/tests'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/build/deps/libosmocore/tests'
make[3]: Leaving directory '/build/deps/libosmocore/tests'
make[2]: Leaving directory '/build/deps/libosmocore/tests'
make[2]: Entering directory '/build/deps/libosmocore'
make[3]: Entering directory '/build/deps/libosmocore'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/bin'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/share/aclocal'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib/pkgconfig'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include'
/usr/bin/install -c -m 644 m4/osmo_ac_code_coverage.m4 m4/osmo_ax_code_coverage.m4 '/build/deps/install/stow/libosmocore/share/aclocal'
/usr/bin/install -c osmo-release.sh '/build/deps/install/stow/libosmocore/bin'
/usr/bin/install -c -m 644 osmo-release.mk '/build/deps/install/stow/libosmocore/include'
/usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc libosmousb.pc libosmoisdn.pc '/build/deps/install/stow/libosmocore/lib/pkgconfig'
make install-data-hook
make[4]: Entering directory '/build/deps/libosmocore'
make[4]: Nothing to be done for 'install-data-hook'.
make[4]: Leaving directory '/build/deps/libosmocore'
make[3]: Leaving directory '/build/deps/libosmocore'
make[2]: Leaving directory '/build/deps/libosmocore'
make[1]: Leaving directory '/build/deps/libosmocore'
+ STOW_DIR=/build/deps/install/stow stow --restow libosmocore
++ find . -name '*.[hc]'
+ verify_value_string_arrays_are_terminated.py ./src/flip_bits.c ./src/vty.c ./src/flip_bits.h ./src/e1_recorder.c ./src/recorder.h ./src/e1cap_dump.c ./src/hdlc.c ./src/hdlc-test.c ./src/storage.c ./src/storage.h ./src/hdlc.h ./deps/install/stow/libosmocore/include/osmocom/vty/cpu_sched_vty.h ./deps/install/stow/libosmocore/include/osmocom/vty/stats.h ./deps/install/stow/libosmocore/include/osmocom/vty/tdef_vty.h ./deps/install/stow/libosmocore/include/osmocom/vty/logging.h ./deps/install/stow/libosmocore/include/osmocom/vty/vty.h ./deps/install/stow/libosmocore/include/osmocom/vty/ports.h ./deps/install/stow/libosmocore/include/osmocom/vty/buffer.h ./deps/install/stow/libosmocore/include/osmocom/vty/command.h ./deps/install/stow/libosmocore/include/osmocom/vty/telnet_interface.h ./deps/install/stow/libosmocore/include/osmocom/vty/vector.h ./deps/install/stow/libosmocore/include/osmocom/vty/misc.h ./deps/install/stow/libosmocore/include/osmocom/ctrl/control_vty.h ./deps/install/stow/libosmocore/include/osmocom/ctrl/control_cmd.h ./deps/install/stow/libosmocore/include/osmocom/ctrl/ports.h ./deps/install/stow/libosmocore/include/osmocom/ctrl/control_if.h ./deps/install/stow/libosmocore/include/osmocom/usb/libusb.h ./deps/install/stow/libosmocore/include/osmocom/isdn/i460_mux.h ./deps/install/stow/libosmocore/include/osmocom/isdn/v110_ta.h ./deps/install/stow/libosmocore/include/osmocom/isdn/v110.h ./deps/install/stow/libosmocore/include/osmocom/isdn/lapd_core.h ./deps/install/stow/libosmocore/include/osmocom/gsm/apn.h ./deps/install/stow/libosmocore/include/osmocom/gsm/i460_mux.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0411_smc.h ./deps/install/stow/libosmocore/include/osmocom/gsm/comp128.h ./deps/install/stow/libosmocore/include/osmocom/gsm/rlp.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm48.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm29118.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0808.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0341.h ./deps/install/stow/libosmocore/include/osmocom/gsm/a5.h ./deps/install/stow/libosmocore/include/osmocom/gsm/abis_nm.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0411_smr.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsup.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0502.h ./deps/install/stow/libosmocore/include/osmocom/gsm/prim.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm23236.h ./deps/install/stow/libosmocore/include/osmocom/gsm/comp128v23.h ./deps/install/stow/libosmocore/include/osmocom/gsm/meas_rep.h ./deps/install/stow/libosmocore/include/osmocom/gsm/oap.h ./deps/install/stow/libosmocore/include/osmocom/gsm/l1sap.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gan.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm44021.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsup_sms.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0411_utils.h ./deps/install/stow/libosmocore/include/osmocom/gsm/bts_features.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm_utils.h ./deps/install/stow/libosmocore/include/osmocom/gsm/rsl.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm48_arfcn_range_encode.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0503.h ./deps/install/stow/libosmocore/include/osmocom/gsm/iuup.h ./deps/install/stow/libosmocore/include/osmocom/gsm/mncc.h ./deps/install/stow/libosmocore/include/osmocom/gsm/bitvec_gsm.h ./deps/install/stow/libosmocore/include/osmocom/gsm/bssmap_le.h ./deps/install/stow/libosmocore/include/osmocom/gsm/cbsp.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0808_utils.h ./deps/install/stow/libosmocore/include/osmocom/gsm/bsslap.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm48_rest_octets.h ./deps/install/stow/libosmocore/include/osmocom/gsm/oap_client.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gad.h ./deps/install/stow/libosmocore/include/osmocom/gsm/rxlev_stat.h ./deps/install/stow/libosmocore/include/osmocom/gsm/lapdm.h ./deps/install/stow/libosmocore/include/osmocom/gsm/lapd_core.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm48_ie.h ./deps/install/stow/libosmocore/include/osmocom/gsm/tlv.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm29205.h ./deps/install/stow/libosmocore/include/osmocom/gsm/sysinfo.h ./deps/install/stow/libosmocore/include/osmocom/gsm/ipa.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_04_14.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_08_08.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_44_318.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/ipaccess.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_04_08.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_04_11.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_44_004.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_23_041.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_23_003.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_03_41.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_04_08_gprs.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_44_068.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_03_40.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_08_58.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/smpp34_osmocom.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_48_049.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_48_071.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_25_415.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_12_21.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_09_02.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_44_060.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_04_80.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_04_12.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_29_118.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_23_032.h ./deps/install/stow/libosmocore/include/osmocom/gsm/protocol/gsm_49_031.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm23003.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0480.h ./deps/install/stow/libosmocore/include/osmocom/gsm/gsm0808_lcs.h ./deps/install/stow/libosmocore/include/osmocom/crypt/gprs_cipher.h ./deps/install/stow/libosmocore/include/osmocom/crypt/auth.h ./deps/install/stow/libosmocore/include/osmocom/crypt/utran_cipher.h ./deps/install/stow/libosmocore/include/osmocom/crypt/kdf.h ./deps/install/stow/libosmocore/include/osmocom/coding/gsm0503_coding.h ./deps/install/stow/libosmocore/include/osmocom/coding/gsm0503_mapping.h ./deps/install/stow/libosmocore/include/osmocom/coding/gsm0503_amr_dtx.h ./deps/install/stow/libosmocore/include/osmocom/coding/gsm0503_parity.h ./deps/install/stow/libosmocore/include/osmocom/coding/gsm0503_tables.h ./deps/install/stow/libosmocore/include/osmocom/coding/gsm0503_interleaving.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_bssgp2.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_ns.h ./deps/install/stow/libosmocore/include/osmocom/gprs/bssgp_bvc_fsm.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_bssgp.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_msgb.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_ns_frgre.h ./deps/install/stow/libosmocore/include/osmocom/gprs/frame_relay.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_bssgp_bss.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_ns2.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_rlc.h ./deps/install/stow/libosmocore/include/osmocom/gprs/protocol/gsm_04_60.h ./deps/install/stow/libosmocore/include/osmocom/gprs/protocol/gsm_08_16.h ./deps/install/stow/libosmocore/include/osmocom/gprs/protocol/gsm_08_18.h ./deps/install/stow/libosmocore/include/osmocom/gprs/protocol/gsm_24_301.h ./deps/install/stow/libosmocore/include/osmocom/gprs/gprs_bssgp_rim.h ./deps/install/stow/libosmocore/include/osmocom/codec/ecu.h ./deps/install/stow/libosmocore/include/osmocom/codec/gsm610_bits.h ./deps/install/stow/libosmocore/include/osmocom/codec/codec.h ./deps/install/stow/libosmocore/include/osmocom/sim/class_tables.h ./deps/install/stow/libosmocore/include/osmocom/sim/sim.h ./deps/install/stow/libosmocore/include/osmocom/core/time_cc.h ./deps/install/stow/libosmocore/include/osmocom/core/application.h ./deps/install/stow/libosmocore/include/osmocom/core/crc32gen.h ./deps/install/stow/libosmocore/include/osmocom/core/gsmtap_util.h ./deps/install/stow/libosmocore/include/osmocom/core/macaddr.h ./deps/install/stow/libosmocore/include/osmocom/core/bitcomp.h ./deps/install/stow/libosmocore/include/osmocom/core/it_q.h ./deps/install/stow/libosmocore/include/osmocom/core/use_count.h ./deps/install/stow/libosmocore/include/osmocom/core/fsm.h ./deps/install/stow/libosmocore/include/osmocom/core/stats.h ./deps/install/stow/libosmocore/include/osmocom/core/exec.h ./deps/install/stow/libosmocore/include/osmocom/core/talloc.h ./deps/install/stow/libosmocore/include/osmocom/core/mnl.h ./deps/install/stow/libosmocore/include/osmocom/core/msgb.h ./deps/install/stow/libosmocore/include/osmocom/core/byteswap.h ./deps/install/stow/libosmocore/include/osmocom/core/crc64gen.h ./deps/install/stow/libosmocore/include/osmocom/core/isdnhdlc.h ./deps/install/stow/libosmocore/include/osmocom/core/counter.h ./deps/install/stow/libosmocore/include/osmocom/core/logging.h ./deps/install/stow/libosmocore/include/osmocom/core/panic.h ./deps/install/stow/libosmocore/include/osmocom/core/plugin.h ./deps/install/stow/libosmocore/include/osmocom/core/statistics.h ./deps/install/stow/libosmocore/include/osmocom/core/write_queue.h ./deps/install/stow/libosmocore/include/osmocom/core/timer.h ./deps/install/stow/libosmocore/include/osmocom/core/prim.h ./deps/install/stow/libosmocore/include/osmocom/core/netns.h ./deps/install/stow/libosmocore/include/osmocom/core/timer_compat.h ./deps/install/stow/libosmocore/include/osmocom/core/soft_uart.h ./deps/install/stow/libosmocore/include/osmocom/core/sercomm.h ./deps/install/stow/libosmocore/include/osmocom/core/thread.h ./deps/install/stow/libosmocore/include/osmocom/core/bit16gen.h ./deps/install/stow/libosmocore/include/osmocom/core/crc16.h ./deps/install/stow/libosmocore/include/osmocom/core/socket.h ./deps/install/stow/libosmocore/include/osmocom/core/tun.h ./deps/install/stow/libosmocore/include/osmocom/core/prbs.h ./deps/install/stow/libosmocore/include/osmocom/core/process.h ./deps/install/stow/libosmocore/include/osmocom/core/defs.h ./deps/install/stow/libosmocore/include/osmocom/core/linuxrbtree.h ./deps/install/stow/libosmocore/include/osmocom/core/bitvec.h ./deps/install/stow/libosmocore/include/osmocom/core/rate_ctr.h ./deps/install/stow/libosmocore/include/osmocom/core/bit32gen.h ./deps/install/stow/libosmocore/include/osmocom/core/signal.h ./deps/install/stow/libosmocore/include/osmocom/core/crcgen.h ./deps/install/stow/libosmocore/include/osmocom/core/tdef.h ./deps/install/stow/libosmocore/include/osmocom/core/netdev.h ./deps/install/stow/libosmocore/include/osmocom/core/osmo_io.h ./deps/install/stow/libosmocore/include/osmocom/core/hashtable.h ./deps/install/stow/libosmocore/include/osmocom/core/sockaddr_str.h ./deps/install/stow/libosmocore/include/osmocom/core/base64.h ./deps/install/stow/libosmocore/include/osmocom/core/socket_compat.h ./deps/install/stow/libosmocore/include/osmocom/core/serial.h ./deps/install/stow/libosmocore/include/osmocom/core/conv.h ./deps/install/stow/libosmocore/include/osmocom/core/select.h ./deps/install/stow/libosmocore/include/osmocom/core/crc8gen.h ./deps/install/stow/libosmocore/include/osmocom/core/strrb.h ./deps/install/stow/libosmocore/include/osmocom/core/backtrace.h ./deps/install/stow/libosmocore/include/osmocom/core/gsmtap.h ./deps/install/stow/libosmocore/include/osmocom/core/stat_item.h ./deps/install/stow/libosmocore/include/osmocom/core/loggingrb.h ./deps/install/stow/libosmocore/include/osmocom/core/endian.h ./deps/install/stow/libosmocore/include/osmocom/core/log2.h ./deps/install/stow/libosmocore/include/osmocom/core/linuxlist.h ./deps/install/stow/libosmocore/include/osmocom/core/utils.h ./deps/install/stow/libosmocore/include/osmocom/core/bits.h ./deps/install/stow/libosmocore/include/osmocom/core/crc16gen.h ./deps/install/stow/libosmocore/include/osmocom/core/hash.h ./deps/install/stow/libosmocore/include/osmocom/core/msgfile.h ./deps/install/stow/libosmocore/include/osmocom/core/stats_tcp.h ./deps/install/stow/libosmocore/include/osmocom/core/bit64gen.h ./deps/libosmocore/tests/vty/vty_transcript_test.c ./deps/libosmocore/tests/vty/vty_test.c ./deps/libosmocore/tests/comp128/comp128_test.c ./deps/libosmocore/tests/ctrl/ctrl_test.c ./deps/libosmocore/tests/bitvec/bitvec_test.c ./deps/libosmocore/tests/gsm44021/frame_csd_test.c ./deps/libosmocore/tests/a5/a5_test.c ./deps/libosmocore/tests/gsm0408/gsm0408_test.c ./deps/libosmocore/tests/write_queue/wqueue_test.c ./deps/libosmocore/tests/auth/xor2g_test.c ./deps/libosmocore/tests/auth/milenage_test.c ./deps/libosmocore/tests/auth/tuak_test.c ./deps/libosmocore/tests/dtx/dtx_gsm0503_test.c ./deps/libosmocore/tests/fr/fr_test.c ./deps/libosmocore/tests/logging/logging_test.c ./deps/libosmocore/tests/logging/logging_gsmtap_test.c ./deps/libosmocore/tests/logging/logging_vty_test.c ./deps/libosmocore/tests/soft_uart/soft_uart_test.c ./deps/libosmocore/tests/fsm/fsm_dealloc_test.c ./deps/libosmocore/tests/fsm/fsm_test.c ./deps/libosmocore/tests/bssmap_le/bssmap_le_test.c ./deps/libosmocore/tests/iuup/iuup_test.c ./deps/libosmocore/tests/exec/exec_test.c ./deps/libosmocore/tests/use_count/use_count_test.c ./deps/libosmocore/tests/msgfile/msgfile_test.c ./deps/libosmocore/tests/context/context_test.c ./deps/libosmocore/tests/conv/conv.c ./deps/libosmocore/tests/conv/conv_test.c ./deps/libosmocore/tests/conv/conv.h ./deps/libosmocore/tests/conv/gsm0503_test_vectors.c ./deps/libosmocore/tests/conv/conv_gsm0503_test.c ./deps/libosmocore/tests/v110/frame_test.c ./deps/libosmocore/tests/v110/ra1_test.c ./deps/libosmocore/tests/v110/ta_test.c ./deps/libosmocore/tests/timer/clk_override_test.c ./deps/libosmocore/tests/timer/timer_test.c ./deps/libosmocore/tests/time_cc/time_cc_test.c ./deps/libosmocore/tests/sockaddr_str/sockaddr_str_test.c ./deps/libosmocore/tests/abis/abis_test.c ./deps/libosmocore/tests/gea/gea_test.c ./deps/libosmocore/tests/it_q/it_q_test.c ./deps/libosmocore/tests/smscb/cbsp_test.c ./deps/libosmocore/tests/smscb/gsm0341_test.c ./deps/libosmocore/tests/smscb/smscb_test.c ./deps/libosmocore/tests/utils/utils_test.c ./deps/libosmocore/tests/rlp/rlp_test.c ./deps/libosmocore/tests/osmo_io/osmo_io_test.c ./deps/libosmocore/tests/gsm0502/gsm0502_test.c ./deps/libosmocore/tests/i460_mux/i460_mux_test.c ./deps/libosmocore/tests/tdef/tdef_test.c ./deps/libosmocore/tests/tdef/tdef_vty_config_root_test.c ./deps/libosmocore/tests/tdef/tdef_vty_config_subnode_test.c ./deps/libosmocore/tests/tdef/tdef_vty_dynamic_test.c ./deps/libosmocore/tests/prbs/prbs_test.c ./deps/libosmocore/tests/gb/gprs_bssgp_test.c ./deps/libosmocore/tests/gb/gprs_ns2_test.c ./deps/libosmocore/tests/gb/gprs_bssgp_rim_test.c ./deps/libosmocore/tests/gb/gprs_ns_test.c ./deps/libosmocore/tests/gb/bssgp_fc_test.c ./deps/libosmocore/tests/coding/coding_test.c ./deps/libosmocore/tests/lapd/lapd_test.c ./deps/libosmocore/tests/gsm23236/gsm23236_test.c ./deps/libosmocore/tests/gad/gad_test.c ./deps/libosmocore/tests/base64/base64_test.c ./deps/libosmocore/tests/gsm23003/gsm23003_test.c ./deps/libosmocore/tests/bsslap/bsslap_test.c ./deps/libosmocore/tests/gsup/gsup_test.c ./deps/libosmocore/tests/gprs/gprs_test.c ./deps/libosmocore/tests/oap/oap_client_test.c ./deps/libosmocore/tests/oap/oap_test.c ./deps/libosmocore/tests/gsm29205/gsm29205_test.c ./deps/libosmocore/tests/socket/socket_sctp_test.c ./deps/libosmocore/tests/socket/socket_test.c ./deps/libosmocore/tests/gsm48/rest_octets_test.c ./deps/libosmocore/tests/gsm0808/gsm0808_test.c ./deps/libosmocore/tests/libsercomstub.c ./deps/libosmocore/tests/stats/stats_test.c ./deps/libosmocore/tests/stats/stats_vty_test.c ./deps/libosmocore/tests/bitgen/bitgen_test.c ./deps/libosmocore/tests/codec/codec_test.c ./deps/libosmocore/tests/codec/codec_ecu_fr_test.c ./deps/libosmocore/tests/sms/sms_test.c ./deps/libosmocore/tests/sim/sim_test.c ./deps/libosmocore/tests/ussd/ussd_test.c ./deps/libosmocore/tests/strrb/strrb_test.c ./deps/libosmocore/tests/loggingrb/loggingrb_test.c ./deps/libosmocore/tests/endian/endian_test.c ./deps/libosmocore/tests/msgb/msgb_test.c ./deps/libosmocore/tests/bits/bitfield_test.c ./deps/libosmocore/tests/bits/bitcomp_test.c ./deps/libosmocore/tests/bits/bitrev_test.c ./deps/libosmocore/tests/kasumi/kasumi_test.c ./deps/libosmocore/tests/tlv/tlv_test.c ./deps/libosmocore/tests/sercomm/sercomm_test.c ./deps/libosmocore/utils/osmo-ns-dummy-vty.c ./deps/libosmocore/utils/osmo-sim-test.c ./deps/libosmocore/utils/gsmtap-logsend.c ./deps/libosmocore/utils/osmo-auc-gen.c ./deps/libosmocore/utils/osmo-config-merge.c ./deps/libosmocore/utils/osmo-arfcn.c ./deps/libosmocore/utils/osmo-stat-dummy/osmo-stat-dummy.c ./deps/libosmocore/utils/osmo-ns-dummy.c ./deps/libosmocore/utils/osmo-aka-verify.c ./deps/libosmocore/include/osmocom/vty/cpu_sched_vty.h ./deps/libosmocore/include/osmocom/vty/stats.h ./deps/libosmocore/include/osmocom/vty/tdef_vty.h ./deps/libosmocore/include/osmocom/vty/logging.h ./deps/libosmocore/include/osmocom/vty/vty.h ./deps/libosmocore/include/osmocom/vty/ports.h ./deps/libosmocore/include/osmocom/vty/buffer.h ./deps/libosmocore/include/osmocom/vty/command.h ./deps/libosmocore/include/osmocom/vty/telnet_interface.h ./deps/libosmocore/include/osmocom/vty/vector.h ./deps/libosmocore/include/osmocom/vty/misc.h ./deps/libosmocore/include/osmocom/ctrl/control_vty.h ./deps/libosmocore/include/osmocom/ctrl/control_cmd.h ./deps/libosmocore/include/osmocom/ctrl/ports.h ./deps/libosmocore/include/osmocom/ctrl/control_if.h ./deps/libosmocore/include/osmocom/usb/libusb.h ./deps/libosmocore/include/osmocom/isdn/i460_mux.h ./deps/libosmocore/include/osmocom/isdn/v110_ta.h ./deps/libosmocore/include/osmocom/isdn/v110.h ./deps/libosmocore/include/osmocom/isdn/lapd_core.h ./deps/libosmocore/include/osmocom/gsm/apn.h ./deps/libosmocore/include/osmocom/gsm/i460_mux.h ./deps/libosmocore/include/osmocom/gsm/gsm0411_smc.h ./deps/libosmocore/include/osmocom/gsm/comp128.h ./deps/libosmocore/include/osmocom/gsm/rlp.h ./deps/libosmocore/include/osmocom/gsm/gsm48.h ./deps/libosmocore/include/osmocom/gsm/gsm29118.h ./deps/libosmocore/include/osmocom/gsm/gsm0808.h ./deps/libosmocore/include/osmocom/gsm/gsm0341.h ./deps/libosmocore/include/osmocom/gsm/a5.h ./deps/libosmocore/include/osmocom/gsm/kasumi.h ./deps/libosmocore/include/osmocom/gsm/abis_nm.h ./deps/libosmocore/include/osmocom/gsm/gsm0411_smr.h ./deps/libosmocore/include/osmocom/gsm/gsup.h ./deps/libosmocore/include/osmocom/gsm/gsm0502.h ./deps/libosmocore/include/osmocom/gsm/prim.h ./deps/libosmocore/include/osmocom/gsm/gsm23236.h ./deps/libosmocore/include/osmocom/gsm/comp128v23.h ./deps/libosmocore/include/osmocom/gsm/meas_rep.h ./deps/libosmocore/include/osmocom/gsm/gea.h ./deps/libosmocore/include/osmocom/gsm/oap.h ./deps/libosmocore/include/osmocom/gsm/l1sap.h ./deps/libosmocore/include/osmocom/gsm/gan.h ./deps/libosmocore/include/osmocom/gsm/gsm44021.h ./deps/libosmocore/include/osmocom/gsm/gsup_sms.h ./deps/libosmocore/include/osmocom/gsm/gsm0411_utils.h ./deps/libosmocore/include/osmocom/gsm/bts_features.h ./deps/libosmocore/include/osmocom/gsm/gsm_utils.h ./deps/libosmocore/include/osmocom/gsm/rsl.h ./deps/libosmocore/include/osmocom/gsm/gsm48_arfcn_range_encode.h ./deps/libosmocore/include/osmocom/gsm/gsm0503.h ./deps/libosmocore/include/osmocom/gsm/iuup.h ./deps/libosmocore/include/osmocom/gsm/mncc.h ./deps/libosmocore/include/osmocom/gsm/bitvec_gsm.h ./deps/libosmocore/include/osmocom/gsm/bssmap_le.h ./deps/libosmocore/include/osmocom/gsm/cbsp.h ./deps/libosmocore/include/osmocom/gsm/gsm0808_utils.h ./deps/libosmocore/include/osmocom/gsm/bsslap.h ./deps/libosmocore/include/osmocom/gsm/gsm48_rest_octets.h ./deps/libosmocore/include/osmocom/gsm/oap_client.h ./deps/libosmocore/include/osmocom/gsm/gad.h ./deps/libosmocore/include/osmocom/gsm/rxlev_stat.h ./deps/libosmocore/include/osmocom/gsm/lapdm.h ./deps/libosmocore/include/osmocom/gsm/lapd_core.h ./deps/libosmocore/include/osmocom/gsm/gsm48_ie.h ./deps/libosmocore/include/osmocom/gsm/tlv.h ./deps/libosmocore/include/osmocom/gsm/gsm29205.h ./deps/libosmocore/include/osmocom/gsm/sysinfo.h ./deps/libosmocore/include/osmocom/gsm/ipa.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_04_14.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_08_08.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_44_318.h ./deps/libosmocore/include/osmocom/gsm/protocol/ipaccess.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_04_08.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_04_11.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_44_004.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_23_041.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_23_003.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_03_41.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_04_08_gprs.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_44_068.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_03_40.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_08_58.h ./deps/libosmocore/include/osmocom/gsm/protocol/smpp34_osmocom.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_48_049.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_48_071.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_25_415.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_12_21.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_09_02.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_44_060.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_04_80.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_04_12.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_29_118.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_23_032.h ./deps/libosmocore/include/osmocom/gsm/protocol/gsm_49_031.h ./deps/libosmocore/include/osmocom/gsm/gsm23003.h ./deps/libosmocore/include/osmocom/gsm/gsm0480.h ./deps/libosmocore/include/osmocom/gsm/gsm0808_lcs.h ./deps/libosmocore/include/osmocom/crypt/gprs_cipher.h ./deps/libosmocore/include/osmocom/crypt/auth.h ./deps/libosmocore/include/osmocom/crypt/utran_cipher.h ./deps/libosmocore/include/osmocom/crypt/kdf.h ./deps/libosmocore/include/osmocom/coding/gsm0503_coding.h ./deps/libosmocore/include/osmocom/coding/gsm0503_mapping.h ./deps/libosmocore/include/osmocom/coding/gsm0503_amr_dtx.h ./deps/libosmocore/include/osmocom/coding/gsm0503_parity.h ./deps/libosmocore/include/osmocom/coding/gsm0503_tables.h ./deps/libosmocore/include/osmocom/coding/gsm0503_interleaving.h ./deps/libosmocore/include/osmocom/gprs/gprs_bssgp2.h ./deps/libosmocore/include/osmocom/gprs/gprs_ns.h ./deps/libosmocore/include/osmocom/gprs/bssgp_bvc_fsm.h ./deps/libosmocore/include/osmocom/gprs/gprs_bssgp.h ./deps/libosmocore/include/osmocom/gprs/gprs_msgb.h ./deps/libosmocore/include/osmocom/gprs/gprs_ns_frgre.h ./deps/libosmocore/include/osmocom/gprs/frame_relay.h ./deps/libosmocore/include/osmocom/gprs/gprs_bssgp_bss.h ./deps/libosmocore/include/osmocom/gprs/gprs_ns2.h ./deps/libosmocore/include/osmocom/gprs/gprs_rlc.h ./deps/libosmocore/include/osmocom/gprs/protocol/gsm_04_60.h ./deps/libosmocore/include/osmocom/gprs/protocol/gsm_08_16.h ./deps/libosmocore/include/osmocom/gprs/protocol/gsm_08_18.h ./deps/libosmocore/include/osmocom/gprs/protocol/gsm_24_301.h ./deps/libosmocore/include/osmocom/gprs/gprs_bssgp_rim.h ./deps/libosmocore/include/osmocom/codec/ecu.h ./deps/libosmocore/include/osmocom/codec/gsm610_bits.h ./deps/libosmocore/include/osmocom/codec/codec.h ./deps/libosmocore/include/osmocom/sim/class_tables.h ./deps/libosmocore/include/osmocom/sim/sim.h ./deps/libosmocore/include/osmocom/core/time_cc.h ./deps/libosmocore/include/osmocom/core/application.h ./deps/libosmocore/include/osmocom/core/crc32gen.h ./deps/libosmocore/include/osmocom/core/gsmtap_util.h ./deps/libosmocore/include/osmocom/core/macaddr.h ./deps/libosmocore/include/osmocom/core/bitcomp.h ./deps/libosmocore/include/osmocom/core/it_q.h ./deps/libosmocore/include/osmocom/core/use_count.h ./deps/libosmocore/include/osmocom/core/fsm.h ./deps/libosmocore/include/osmocom/core/stats.h ./deps/libosmocore/include/osmocom/core/exec.h ./deps/libosmocore/include/osmocom/core/talloc.h ./deps/libosmocore/include/osmocom/core/mnl.h ./deps/libosmocore/include/osmocom/core/msgb.h ./deps/libosmocore/include/osmocom/core/byteswap.h ./deps/libosmocore/include/osmocom/core/crc64gen.h ./deps/libosmocore/include/osmocom/core/isdnhdlc.h ./deps/libosmocore/include/osmocom/core/counter.h ./deps/libosmocore/include/osmocom/core/logging.h ./deps/libosmocore/include/osmocom/core/panic.h ./deps/libosmocore/include/osmocom/core/plugin.h ./deps/libosmocore/include/osmocom/core/statistics.h ./deps/libosmocore/include/osmocom/core/write_queue.h ./deps/libosmocore/include/osmocom/core/timer.h ./deps/libosmocore/include/osmocom/core/prim.h ./deps/libosmocore/include/osmocom/core/netns.h ./deps/libosmocore/include/osmocom/core/timer_compat.h ./deps/libosmocore/include/osmocom/core/soft_uart.h ./deps/libosmocore/include/osmocom/core/sercomm.h ./deps/libosmocore/include/osmocom/core/thread.h ./deps/libosmocore/include/osmocom/core/bit16gen.h ./deps/libosmocore/include/osmocom/core/crc16.h ./deps/libosmocore/include/osmocom/core/socket.h ./deps/libosmocore/include/osmocom/core/tun.h ./deps/libosmocore/include/osmocom/core/prbs.h ./deps/libosmocore/include/osmocom/core/process.h ./deps/libosmocore/include/osmocom/core/defs.h ./deps/libosmocore/include/osmocom/core/linuxrbtree.h ./deps/libosmocore/include/osmocom/core/bitvec.h ./deps/libosmocore/include/osmocom/core/rate_ctr.h ./deps/libosmocore/include/osmocom/core/bit32gen.h ./deps/libosmocore/include/osmocom/core/signal.h ./deps/libosmocore/include/osmocom/core/crcgen.h ./deps/libosmocore/include/osmocom/core/tdef.h ./deps/libosmocore/include/osmocom/core/netdev.h ./deps/libosmocore/include/osmocom/core/osmo_io.h ./deps/libosmocore/include/osmocom/core/hashtable.h ./deps/libosmocore/include/osmocom/core/sockaddr_str.h ./deps/libosmocore/include/osmocom/core/base64.h ./deps/libosmocore/include/osmocom/core/socket_compat.h ./deps/libosmocore/include/osmocom/core/serial.h ./deps/libosmocore/include/osmocom/core/conv.h ./deps/libosmocore/include/osmocom/core/select.h ./deps/libosmocore/include/osmocom/core/crc8gen.h ./deps/libosmocore/include/osmocom/core/strrb.h ./deps/libosmocore/include/osmocom/core/backtrace.h ./deps/libosmocore/include/osmocom/core/gsmtap.h ./deps/libosmocore/include/osmocom/core/stat_item.h ./deps/libosmocore/include/osmocom/core/loggingrb.h ./deps/libosmocore/include/osmocom/core/endian.h ./deps/libosmocore/include/osmocom/core/log2.h ./deps/libosmocore/include/osmocom/core/linuxlist.h ./deps/libosmocore/include/osmocom/core/utils.h ./deps/libosmocore/include/osmocom/core/bits.h ./deps/libosmocore/include/osmocom/core/crc16gen.h ./deps/libosmocore/include/osmocom/core/hash.h ./deps/libosmocore/include/osmocom/core/msgfile.h ./deps/libosmocore/include/osmocom/core/stats_tcp.h ./deps/libosmocore/include/osmocom/core/bit64gen.h ./deps/libosmocore/include/osmocom/core/logging_internal.h ./deps/libosmocore/src/vty/logging_vty.c ./deps/libosmocore/src/vty/cpu_sched_vty.c ./deps/libosmocore/src/vty/vector.c ./deps/libosmocore/src/vty/telnet_interface.c ./deps/libosmocore/src/vty/utils.c ./deps/libosmocore/src/vty/talloc_ctx_vty.c ./deps/libosmocore/src/vty/vty.c ./deps/libosmocore/src/vty/stats_vty.c ./deps/libosmocore/src/vty/buffer.c ./deps/libosmocore/src/vty/fsm_vty.c ./deps/libosmocore/src/vty/command.c ./deps/libosmocore/src/vty/tdef_vty.c ./deps/libosmocore/src/ctrl/control_cmd.c ./deps/libosmocore/src/ctrl/fsm_ctrl_commands.c ./deps/libosmocore/src/ctrl/control_vty.c ./deps/libosmocore/src/ctrl/control_if.c ./deps/libosmocore/src/usb/osmo_libusb.c ./deps/libosmocore/src/isdn/v110_ta.c ./deps/libosmocore/src/isdn/v110.c ./deps/libosmocore/src/isdn/lapd_core.c ./deps/libosmocore/src/isdn/i460_mux.c ./deps/libosmocore/src/gsm/bts_features.c ./deps/libosmocore/src/gsm/oap.c ./deps/libosmocore/src/gsm/rxlev_stat.c ./deps/libosmocore/src/gsm/gsm44021.c ./deps/libosmocore/src/gsm/milenage/aes-encblock.c ./deps/libosmocore/src/gsm/milenage/aes-internal.c ./deps/libosmocore/src/gsm/milenage/aes-internal-enc.c ./deps/libosmocore/src/gsm/milenage/common.h ./deps/libosmocore/src/gsm/milenage/aes_wrap.h ./deps/libosmocore/src/gsm/milenage/aes_i.h ./deps/libosmocore/src/gsm/milenage/aes.h ./deps/libosmocore/src/gsm/milenage/milenage.h ./deps/libosmocore/src/gsm/milenage/milenage.c ./deps/libosmocore/src/gsm/milenage/includes.h ./deps/libosmocore/src/gsm/milenage/crypto.h ./deps/libosmocore/src/gsm/auth_tuak.c ./deps/libosmocore/src/gsm/tuak/KeccakP-1600-3gpp.h ./deps/libosmocore/src/gsm/tuak/KeccakP-1600-3gpp.c ./deps/libosmocore/src/gsm/tuak/tuak.h ./deps/libosmocore/src/gsm/tuak/tuak.c ./deps/libosmocore/src/gsm/rsl.c ./deps/libosmocore/src/gsm/gprs_gea.c ./deps/libosmocore/src/gsm/auth_comp128v1.c ./deps/libosmocore/src/gsm/sysinfo.c ./deps/libosmocore/src/gsm/auth_xor.c ./deps/libosmocore/src/gsm/gsm0502.c ./deps/libosmocore/src/gsm/a5.c ./deps/libosmocore/src/gsm/gsm0411_smr.c ./deps/libosmocore/src/gsm/mncc.c ./deps/libosmocore/src/gsm/rlp.c ./deps/libosmocore/src/gsm/iuup.c ./deps/libosmocore/src/gsm/gsm48_arfcn_range_encode.c ./deps/libosmocore/src/gsm/abis_nm.c ./deps/libosmocore/src/gsm/kdf.c ./deps/libosmocore/src/gsm/gsm48_ie.c ./deps/libosmocore/src/gsm/gsm23003.c ./deps/libosmocore/src/gsm/auth_core.c ./deps/libosmocore/src/gsm/gsm0411_utils.c ./deps/libosmocore/src/gsm/gprs_cipher_core.c ./deps/libosmocore/src/gsm/gsm_utils.c ./deps/libosmocore/src/gsm/gsm0503_conv.c ./deps/libosmocore/src/gsm/gad.c ./deps/libosmocore/src/gsm/auth_comp128v23.c ./deps/libosmocore/src/gsm/bssmap_le.c ./deps/libosmocore/src/gsm/gsm0808_utils.c ./deps/libosmocore/src/gsm/auth_xor_2g.c ./deps/libosmocore/src/gsm/comp128v23.c ./deps/libosmocore/src/gsm/gsm29118.c ./deps/libosmocore/src/gsm/gsm48.c ./deps/libosmocore/src/gsm/gsm0480.c ./deps/libosmocore/src/gsm/gsm29205.c ./deps/libosmocore/src/gsm/comp128.c ./deps/libosmocore/src/gsm/gprs_rlc.c ./deps/libosmocore/src/gsm/gsm0411_smc.c ./deps/libosmocore/src/gsm/gsm_04_08_gprs.c ./deps/libosmocore/src/gsm/gsm44068.c ./deps/libosmocore/src/gsm/auth_milenage.c ./deps/libosmocore/src/gsm/bsslap.c ./deps/libosmocore/src/gsm/ipa.c ./deps/libosmocore/src/gsm/gsm48_rest_octets.c ./deps/libosmocore/src/gsm/cbsp.c ./deps/libosmocore/src/gsm/oap_client.c ./deps/libosmocore/src/gsm/gsm0341.c ./deps/libosmocore/src/gsm/gsm23236.c ./deps/libosmocore/src/gsm/gan.c ./deps/libosmocore/src/gsm/gsm0808.c ./deps/libosmocore/src/gsm/apn.c ./deps/libosmocore/src/gsm/gsup.c ./deps/libosmocore/src/gsm/tlv_parser.c ./deps/libosmocore/src/gsm/kdf/sha1-internal.c ./deps/libosmocore/src/gsm/kdf/sha256.h ./deps/libosmocore/src/gsm/kdf/common.h ./deps/libosmocore/src/gsm/kdf/sha1.c ./deps/libosmocore/src/gsm/kdf/sha256-internal.c ./deps/libosmocore/src/gsm/kdf/sha1_i.h ./deps/libosmocore/src/gsm/kdf/sha256.c ./deps/libosmocore/src/gsm/kdf/sha1.h ./deps/libosmocore/src/gsm/kdf/sha256_i.h ./deps/libosmocore/src/gsm/kdf/crypto.h ./deps/libosmocore/src/gsm/gsm48049.c ./deps/libosmocore/src/gsm/lapdm.c ./deps/libosmocore/src/gsm/gsup_sms.c ./deps/libosmocore/src/gsm/gea.c ./deps/libosmocore/src/gsm/kasumi.c ./deps/libosmocore/src/gsm/gsm0414.c ./deps/libosmocore/src/gb/gprs_bssgp_internal.h ./deps/libosmocore/src/gb/gprs_ns2_fr.c ./deps/libosmocore/src/gb/gprs_ns2_vc_fsm.c ./deps/libosmocore/src/gb/gprs_bssgp_bss.c ./deps/libosmocore/src/gb/gprs_ns.c ./deps/libosmocore/src/gb/gprs_ns_frgre.c ./deps/libosmocore/src/gb/gprs_ns2_frgre.c ./deps/libosmocore/src/gb/gprs_ns2_message.c ./deps/libosmocore/src/gb/gprs_ns2_internal.h ./deps/libosmocore/src/gb/frame_relay.c ./deps/libosmocore/src/gb/gb_internal.h ./deps/libosmocore/src/gb/gprs_bssgp_vty.c ./deps/libosmocore/src/gb/gprs_bssgp_rim.c ./deps/libosmocore/src/gb/gprs_bssgp.c ./deps/libosmocore/src/gb/gprs_ns2.c ./deps/libosmocore/src/gb/gprs_ns2_udp.c ./deps/libosmocore/src/gb/gprs_ns_vty.c ./deps/libosmocore/src/gb/gprs_ns2_sns.c ./deps/libosmocore/src/gb/gprs_ns2_vty.c ./deps/libosmocore/src/gb/gprs_bssgp_util.c ./deps/libosmocore/src/gb/common_vty.c ./deps/libosmocore/src/gb/common_vty.h ./deps/libosmocore/src/gb/bssgp_bvc_fsm.c ./deps/libosmocore/src/gb/gprs_ns_sns.c ./deps/libosmocore/src/gb/gprs_bssgp2.c ./deps/libosmocore/src/coding/gsm0503_amr_dtx.c ./deps/libosmocore/src/coding/gsm0503_tables.c ./deps/libosmocore/src/coding/gsm0503_coding.c ./deps/libosmocore/src/coding/gsm0503_interleaving.c ./deps/libosmocore/src/coding/gsm0503_parity.c ./deps/libosmocore/src/coding/gsm0503_mapping.c ./deps/libosmocore/src/pseudotalloc/talloc.h ./deps/libosmocore/src/pseudotalloc/pseudotalloc.c ./deps/libosmocore/src/codec/ecu.c ./deps/libosmocore/src/codec/gsm690.c ./deps/libosmocore/src/codec/gsm660.c ./deps/libosmocore/src/codec/ecu_fr_old.c ./deps/libosmocore/src/codec/gsm620.c ./deps/libosmocore/src/codec/gsm610.c ./deps/libosmocore/src/codec/ecu_fr.c ./deps/libosmocore/src/sim/gsm_int.h ./deps/libosmocore/src/sim/reader_pcsc.c ./deps/libosmocore/src/sim/card_fs_isim.c ./deps/libosmocore/src/sim/sim_int.h ./deps/libosmocore/src/sim/class_tables.c ./deps/libosmocore/src/sim/card_fs_sim.c ./deps/libosmocore/src/sim/reader.c ./deps/libosmocore/src/sim/card_fs_tetra.c ./deps/libosmocore/src/sim/core.c ./deps/libosmocore/src/sim/card_fs_hpsim.c ./deps/libosmocore/src/sim/card_fs_uicc.c ./deps/libosmocore/src/sim/card_fs_usim.c ./deps/libosmocore/src/core/prim.c ./deps/libosmocore/src/core/osmo_io_uring.c ./deps/libosmocore/src/core/mnl.c ./deps/libosmocore/src/core/tun.c ./deps/libosmocore/src/core/stats_statsd.c ./deps/libosmocore/src/core/conv.c ./deps/libosmocore/src/core/bitcomp.c ./deps/libosmocore/src/core/backtrace.c ./deps/libosmocore/src/core/sockaddr_str.c ./deps/libosmocore/src/core/logging.c ./deps/libosmocore/src/core/rate_ctr.c ./deps/libosmocore/src/core/utils.c ./deps/libosmocore/src/core/thread.c ./deps/libosmocore/src/core/crc32gen.c ./deps/libosmocore/src/core/conv_acc.c ./deps/libosmocore/src/core/osmo_io_poll.c ./deps/libosmocore/src/core/application.c ./deps/libosmocore/src/core/use_count.c ./deps/libosmocore/src/core/osmo_io_internal.h ./deps/libosmocore/src/core/rbtree.c ./deps/libosmocore/src/core/conv_acc_sse.c ./deps/libosmocore/src/core/timer_gettimeofday.c ./deps/libosmocore/src/core/crc16.c ./deps/libosmocore/src/core/stat_item_internal.h ./deps/libosmocore/src/core/timer.c ./deps/libosmocore/src/core/gsmtap_util.c ./deps/libosmocore/src/core/conv_acc_sse_impl.h ./deps/libosmocore/src/core/strrb.c ./deps/libosmocore/src/core/crc8gen.c ./deps/libosmocore/src/core/socket.c ./deps/libosmocore/src/core/logging_systemd.c ./deps/libosmocore/src/core/conv_acc_neon_impl.h ./deps/libosmocore/src/core/serial.c ./deps/libosmocore/src/core/tdef.c ./deps/libosmocore/src/core/stat_item.c ./deps/libosmocore/src/core/conv_acc_neon.c ./deps/libosmocore/src/core/soft_uart.c ./deps/libosmocore/src/core/plugin.c ./deps/libosmocore/src/core/msgb.c ./deps/libosmocore/src/core/exec.c ./deps/libosmocore/src/core/counter.c ./deps/libosmocore/src/core/timer_clockgettime.c ./deps/libosmocore/src/core/isdnhdlc.c ./deps/libosmocore/src/core/logging_gsmtap.c ./deps/libosmocore/src/core/conv_acc_generic.c ./deps/libosmocore/src/core/base64.c ./deps/libosmocore/src/core/panic.c ./deps/libosmocore/src/core/stats_tcp.c ./deps/libosmocore/src/core/time_cc.c ./deps/libosmocore/src/core/sercomm.c ./deps/libosmocore/src/core/macaddr.c ./deps/libosmocore/src/core/context.c ./deps/libosmocore/src/core/stats.c ./deps/libosmocore/src/core/logging_syslog.c ./deps/libosmocore/src/core/netdev.c ./deps/libosmocore/src/core/fsm.c ./deps/libosmocore/src/core/signal.c ./deps/libosmocore/src/core/select.c ./deps/libosmocore/src/core/bits.c ./deps/libosmocore/src/core/crc16gen.c ./deps/libosmocore/src/core/loggingrb.c ./deps/libosmocore/src/core/prbs.c ./deps/libosmocore/src/core/crc64gen.c ./deps/libosmocore/src/core/conv_acc_sse_avx.c ./deps/libosmocore/src/core/netns.c ./deps/libosmocore/src/core/write_queue.c ./deps/libosmocore/src/core/osmo_io.c ./deps/libosmocore/src/core/msgfile.c ./deps/libosmocore/src/core/bitvec.c ./deps/libosmocore/src/core/it_q.c ./deps/libosmocore/config.h
+ export PKG_CONFIG_PATH=/build/deps/install/lib/pkgconfig:
+ PKG_CONFIG_PATH=/build/deps/install/lib/pkgconfig:
+ export LD_LIBRARY_PATH=/build/deps/install/lib
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ export PATH=/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ PATH=/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+ osmo-build-dep.sh libosmo-abis
=============================== libosmo-abis ===============================
+ mkdir -p /build/deps
+ cd /build/deps
+ osmo-deps.sh libosmo-abis
+ project=libosmo-abis
+ branch=master
+ git branch -a
+ grep -c remotes/origin/master$
+ [ x1 != x0 ]
+ branch=origin/master
+ test -d libosmo-abis
+ osmo_git_clone_url libosmo-abis
+ echo https://gerrit.osmocom.org/libosmo-abis
+ git clone https://gerrit.osmocom.org/libosmo-abis libosmo-abis
Cloning into 'libosmo-abis'...
+ cd libosmo-abis
+ git fetch --tags origin
+ git fetch origin
+ deps= osmo-clean-workspace.sh
+ chmod -R +w .
+ git checkout -f HEAD
Your branch is up to date with 'origin/master'.
+ git clean -dxf
+ [ -d ]
+ [ -d layer1-headers ]
+ git checkout -f origin/master
Note: switching to 'origin/master'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 5277965 e1line_dump_vty(): dump keepalive state and params
+ git rev-parse HEAD
52779651904eba48c97af54b1f3924a38c1086ab
+ cd libosmo-abis
+ mkdir -p /build/deps/install/stow
+ osmo_source_subdir libosmo-abis
+ subdir=
+ [ -n ]
+ autoreconf --install --force
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:67: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:67: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:67: the top level
configure.ac:76: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:76: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:76: the top level
configure.ac:180: warning: AC_OUTPUT should be used without arguments.
configure.ac:180: You should run autoupdate.
configure.ac:22: installing './compile'
configure.ac:24: installing './config.guess'
configure.ac:24: installing './config.sub'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
src/Makefile.am: installing './depcomp'
+ ./configure --prefix=/build/deps/install/stow/libosmo-abis --with-systemdsystemunitdir=/build/deps/install/stow/libosmo-abis/lib/systemd/system
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking if gcc supports -fvisibility=hidden... yes
checking for libosmocore >= 1.9.0... yes
checking for libosmovty >= 1.9.0... yes
checking for libosmogsm >= 1.9.0... yes
checking for libosmocodec >= 1.9.0... yes
checking for ortp >= 0.22.0... yes
checking for dahdi/user.h... yes
CFLAGS=" -std=gnu11 -Wall"
CPPFLAGS=" -Wall"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmoabis.pc
config.status: creating libosmotrau.pc
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating Makefile
config.status: creating contrib/libosmo-abis.spec
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
+ [ -n ]
+ make -j 12 install
echo 1.5.1.11-5277 > .version-t && mv .version-t .version
make install-recursive
make[1]: Entering directory '/build/deps/libosmo-abis'
Making install in include
make[2]: Entering directory '/build/deps/libosmo-abis/include'
make[3]: Entering directory '/build/deps/libosmo-abis/include'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include/osmocom/abis'
/usr/bin/install -c -m 644 osmocom/abis/ipa.h osmocom/abis/trau_frame.h osmocom/abis/ipa_proxy.h osmocom/abis/ipaccess.h osmocom/abis/abis.h osmocom/abis/subchan_demux.h osmocom/abis/e1_input.h osmocom/abis/lapd.h osmocom/abis/lapd_pcap.h osmocom/abis/unixsocket_proto.h '/build/deps/install/stow/libosmo-abis/include/osmocom/abis'
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include/osmocom/trau'
/usr/bin/install -c -m 644 osmocom/trau/osmo_ortp.h osmocom/trau/trau_frame.h osmocom/trau/trau_sync.h osmocom/trau/trau_pcu_ericsson.h osmocom/trau/trau_rtp.h '/build/deps/install/stow/libosmo-abis/include/osmocom/trau'
make[3]: Leaving directory '/build/deps/libosmo-abis/include'
make[2]: Leaving directory '/build/deps/libosmo-abis/include'
Making install in src
make[2]: Entering directory '/build/deps/libosmo-abis/src'
CC init.lo
CC e1_input.lo
CC e1_input_vty.lo
CC ipa_proxy.lo
CC subchan_demux.lo
CC trau_frame.lo
CC trau/libosmotrau_la-osmo_ortp.lo
CC trau/libosmotrau_la-trau_frame.lo
CC trau/libosmotrau_la-trau_sync.lo
CC trau/libosmotrau_la-trau_pcu_ericsson.lo
CC trau/libosmotrau_la-trau_rtp_conv.lo
CC input/e1d.lo
CC input/ipa.lo
CC input/ipa_keepalive.lo
CC input/ipaccess.lo
trau/osmo_ortp.c:235:9: note: '#pragma message: Using internal ortp API: rtp_session_rtcp_rec'
235 | #pragma message ("Using internal ortp API: rtp_session_rtcp_rec")
| ^~~~~~~
CC input/lapd.lo
CC input/lapd_pcap.lo
CC input/misdn.lo
CC input/rs232.lo
CC input/unixsocket.lo
CC input/dahdi.lo
CCLD libosmotrau.la
CCLD libosmoabis.la
make[3]: Entering directory '/build/deps/libosmo-abis/src'
make[3]: Nothing to be done for 'install-data-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmoabis.la libosmotrau.la '/build/deps/install/stow/libosmo-abis/lib'
libtool: install: /usr/bin/install -c .libs/libosmoabis.so.13.0.1 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.so.13.0.1
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.13.0.1 libosmoabis.so.13 || { rm -f libosmoabis.so.13 && ln -s libosmoabis.so.13.0.1 libosmoabis.so.13; }; })
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.13.0.1 libosmoabis.so || { rm -f libosmoabis.so && ln -s libosmoabis.so.13.0.1 libosmoabis.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoabis.lai /build/deps/install/stow/libosmo-abis/lib/libosmoabis.la
libtool: install: /usr/bin/install -c .libs/libosmotrau.so.2.7.1 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.so.2.7.1
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.2.7.1 libosmotrau.so.2 || { rm -f libosmotrau.so.2 && ln -s libosmotrau.so.2.7.1 libosmotrau.so.2; }; })
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.2.7.1 libosmotrau.so || { rm -f libosmotrau.so && ln -s libosmotrau.so.2.7.1 libosmotrau.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmotrau.lai /build/deps/install/stow/libosmo-abis/lib/libosmotrau.la
libtool: install: /usr/bin/install -c .libs/libosmoabis.a /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: /usr/bin/install -c .libs/libosmotrau.a /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmo-abis/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmo-abis/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Leaving directory '/build/deps/libosmo-abis/src'
make[2]: Leaving directory '/build/deps/libosmo-abis/src'
Making install in tests
make[2]: Entering directory '/build/deps/libosmo-abis/tests'
make[3]: Entering directory '/build/deps/libosmo-abis/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/deps/libosmo-abis/tests'
make[2]: Leaving directory '/build/deps/libosmo-abis/tests'
make[2]: Entering directory '/build/deps/libosmo-abis'
make[3]: Entering directory '/build/deps/libosmo-abis'
make[3]: Nothing to be done for 'install-exec-am'.
/usr/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmoabis.pc libosmotrau.pc '/build/deps/install/stow/libosmo-abis/lib/pkgconfig'
make[3]: Leaving directory '/build/deps/libosmo-abis'
make[2]: Leaving directory '/build/deps/libosmo-abis'
make[1]: Leaving directory '/build/deps/libosmo-abis'
+ STOW_DIR=/build/deps/install/stow stow --restow libosmo-abis
+ CONFIG=
+ '[' 1 = 1 ']'
+ CONFIG=--enable-manuals
+ set +x
=============================== osmo-e1-recorder ===============================
+ cd /build
+ autoreconf --install --force
aclocal: warning: couldn't open directory 'm4': No such file or directory
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
configure.ac:40: warning: The macro `AC_HEADER_STDC' is obsolete.
configure.ac:40: You should run autoupdate.
./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
configure.ac:40: the top level
configure.ac:88: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:88: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:88: the top level
configure.ac:109: warning: The macro `AC_HELP_STRING' is obsolete.
configure.ac:109: You should run autoupdate.
./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from...
configure.ac:109: the top level
configure.ac:188: warning: 'AM_CONFIG_HEADER': this macro is obsolete.
configure.ac:188: You should use the 'AC_CONFIG_HEADERS' macro instead.
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from...
aclocal.m4:1089: AM_CONFIG_HEADER is expanded from...
configure.ac:188: the top level
configure.ac:190: warning: AC_OUTPUT should be used without arguments.
configure.ac:190: You should run autoupdate.
configure.ac:23: installing './compile'
configure.ac:25: installing './config.guess'
configure.ac:25: installing './config.sub'
configure.ac:9: installing './install-sh'
configure.ac:9: installing './missing'
src/Makefile.am: installing './depcomp'
+ ./configure --enable-sanitize --enable-external-tests --enable-werror --enable-manuals
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for libosmocore >= 1.2.0... yes
checking for libosmovty >= 1.2.0... yes
checking for libosmogsm >= 1.2.0... yes
checking for libosmoabis >= 0.6.0... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking for python3... yes
checking for osmotestvty.py... yes
checking whether to enable VTY/CTRL tests... yes
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating tests/Makefile
config.status: creating doc/examples/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 12
echo 0.3.7-5f1d > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '/build'
Making all in doc
make[2]: Entering directory '/build/doc'
Making all in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '/build/doc/examples'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making all in src
make[2]: Entering directory '/build/src'
CC e1_recorder.o
CC storage.o
CC vty.o
CC e1cap_dump.o
CC flip_bits.o
CC hdlc.o
CC hdlc-test.o
CCLD hdlc-test
CCLD osmo-e1-recorder
CCLD osmo-e1cap-dump
make[2]: Leaving directory '/build/src'
Making all in tests
make[2]: Entering directory '/build/tests'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/build/tests'
make[2]: Entering directory '/build'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ make check
make check-recursive
make[1]: Entering directory '/build'
Making check in doc
make[2]: Entering directory '/build/doc'
Making check in examples
make[3]: Entering directory '/build/doc/examples'
make[3]: Nothing to be done for 'check'.
make[3]: Leaving directory '/build/doc/examples'
make[3]: Entering directory '/build/doc'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/build/doc'
make[2]: Leaving directory '/build/doc'
Making check in src
make[2]: Entering directory '/build/src'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/build/src'
Making check in tests
make[2]: Entering directory '/build/tests'
make check-local
make[3]: Entering directory '/build/tests'
make python-tests
make[4]: Entering directory '/build/tests'
make vty-test
make[5]: Entering directory '/build/tests'
osmo_verify_transcript_vty.py -v \
-n osmo-e1-recorder -p 4444 \
-r "../src/osmo-e1-recorder -c ../doc/examples/osmo-e1-recorder.cfg" \
./*.vty
Line 0 TS 1 mode 3
Line 0 TS 2 mode 3
Line 0 TS 3 mode 3
Line 0 TS 4 mode 3
Line 0 TS 5 mode 3
Line 0 TS 6 mode 3
Line 0 TS 7 mode 3
Line 0 TS 8 mode 3
Line 0 TS 9 mode 3
Line 0 TS 10 mode 3
Line 0 TS 11 mode 3
Line 0 TS 12 mode 3
Line 0 TS 13 mode 3
Line 0 TS 14 mode 3
Line 0 TS 15 mode 3
Line 0 TS 16 mode 3
Line 0 TS 17 mode 3
Line 0 TS 18 mode 3
Line 0 TS 19 mode 3
Line 0 TS 20 mode 3
Line 0 TS 21 mode 3
Line 0 TS 22 mode 3
Line 0 TS 23 mode 3
Line 1 TS 1 mode 3
Line 1 TS 2 mode 3
Line 1 TS 3 mode 3
Line 1 TS 4 mode 3
Line 1 TS 5 mode 3
Line 1 TS 6 mode 3
Line 1 TS 7 mode 3
Line 1 TS 8 mode 3
Line 1 TS 9 mode 3
Line 1 TS 10 mode 3
Line 1 TS 11 mode 3
Line 1 TS 12 mode 3
Line 1 TS 13 mode 3
Line 1 TS 14 mode 3
Line 1 TS 15 mode 3
Line 1 TS 16 mode 3
Line 1 TS 17 mode 3
Line 1 TS 18 mode 3
Line 1 TS 19 mode 3
Line 1 TS 20 mode 3
Line 1 TS 21 mode 3
Line 1 TS 22 mode 3
Line 1 TS 23 mode 3
<0001> telnet_interface.c:88 Available via telnet 127.0.0.1 4444
Launching: cd '/build/tests'; ../src/osmo-e1-recorder -c ../doc/examples/osmo-e1-recorder.cfg
osmo-e1-recorder> show e1_line
E1 Line Number 0, Name , Driver dahdi
DAHDI Span 1 non-existent
E1 Line Number 1, Name , Driver dahdi
DAHDI Span 2 non-existent
osmo-e1-recorder> show e1_timeslot
E1 Timeslot 0 of Line 0 is Type RAW
E1 Timeslot 1 of Line 0 is Type RAW
E1 Timeslot 2 of Line 0 is Type RAW
E1 Timeslot 3 of Line 0 is Type RAW
E1 Timeslot 4 of Line 0 is Type RAW
E1 Timeslot 5 of Line 0 is Type RAW
E1 Timeslot 6 of Line 0 is Type RAW
E1 Timeslot 7 of Line 0 is Type RAW
E1 Timeslot 8 of Line 0 is Type RAW
E1 Timeslot 9 of Line 0 is Type RAW
E1 Timeslot 10 of Line 0 is Type RAW
E1 Timeslot 11 of Line 0 is Type RAW
E1 Timeslot 12 of Line 0 is Type RAW
E1 Timeslot 13 of Line 0 is Type RAW
E1 Timeslot 14 of Line 0 is Type RAW
E1 Timeslot 15 of Line 0 is Type RAW
E1 Timeslot 16 of Line 0 is Type RAW
E1 Timeslot 17 of Line 0 is Type RAW
E1 Timeslot 18 of Line 0 is Type RAW
E1 Timeslot 19 of Line 0 is Type RAW
E1 Timeslot 20 of Line 0 is Type RAW
E1 Timeslot 21 of Line 0 is Type RAW
E1 Timeslot 22 of Line 0 is Type RAW
E1 Timeslot 0 of Line 1 is Type RAW
E1 Timeslot 1 of Line 1 is Type RAW
E1 Timeslot 2 of Line 1 is Type RAW
E1 Timeslot 3 of Line 1 is Type RAW
E1 Timeslot 4 of Line 1 is Type RAW
E1 Timeslot 5 of Line 1 is Type RAW
E1 Timeslot 6 of Line 1 is Type RAW
E1 Timeslot 7 of Line 1 is Type RAW
E1 Timeslot 8 of Line 1 is Type RAW
E1 Timeslot 9 of Line 1 is Type RAW
E1 Timeslot 10 of Line 1 is Type RAW
E1 Timeslot 11 of Line 1 is Type RAW
E1 Timeslot 12 of Line 1 is Type RAW
E1 Timeslot 13 of Line 1 is Type RAW
E1 Timeslot 14 of Line 1 is Type RAW
E1 Timeslot 15 of Line 1 is Type RAW
E1 Timeslot 16 of Line 1 is Type RAW
E1 Timeslot 17 of Line 1 is Type RAW
E1 Timeslot 18 of Line 1 is Type RAW
E1 Timeslot 19 of Line 1 is Type RAW
E1 Timeslot 20 of Line 1 is Type RAW
E1 Timeslot 21 of Line 1 is Type RAW
E1 Timeslot 22 of Line 1 is Type RAW
osmo-e1-recorder> enable
osmo-e1-recorder# configure terminal
osmo-e1-recorder(config)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
hostname WORD
no hostname [HOSTNAME]
password (8|) WORD
password LINE
enable password (8|) WORD
enable password LINE
no enable password
banner motd default
banner motd file [FILE]
no banner motd
service terminal-length <0-512>
no service terminal-length [<0-512>]
line vty
service advanced-vty
no service advanced-vty
show history
log stderr [blocking-io]
no log stderr
log file FILENAME [blocking-io]
no log file FILENAME
log alarms <2-32700>
no log alarms
log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)
log syslog local <0-7>
no log syslog
log systemd-journal [raw]
no log systemd-journal
log gsmtap [HOSTNAME]
no log gsmtap [HOSTNAME]
e1_input
recorder
osmo-e1-recorder(config)# recorder
osmo-e1-recorder(config-recorder)# list
help
list [with-flags]
show vty-attributes
show vty-attributes (application|library|global)
write terminal
write file [PATH]
write memory
write
show running-config
exit
end
line <0-255> ts <1-31> mode (none|hdlc|trau|raw)
line <0-255> mirror <0-255>
no line <0-255> mirror
storage-path PATH
file-size-mb <1-9999999>
RESULTS:
pass: ./test_nodes.vty
make[5]: Leaving directory '/build/tests'
osmotestvty.py -p /build -w /build -v
test_history (__main__.TestVTY.test_history) ... confpath /build, workdir /build
Running tests for specific VTY commands
Launch: ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg from /build
Opening /dev/null
Launching: PWD=/build './src/osmo-e1-recorder' '-c' '/build/doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/23115/fd
total 0
lr-x------ 1 build build 64 May 8 12:50 0 -> pipe:[2909314174]
l-wx------ 1 build build 64 May 8 12:50 1 -> pipe:[2909314175]
l-wx------ 1 build build 64 May 8 12:50 2 -> pipe:[2909314176]
l-wx------ 1 build build 64 May 8 12:50 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 23115 54.5 0.0 27860 23012 ? S 12:50 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 23116 0.0 0.0 21474886644 12668 ? S 12:50 0:00 ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg
build 23123 0.0 0.0 2576 916 ? S 12:50 0:00 /bin/sh -c ps xua | grep osmo
build 23125 0.0 0.0 3700 1796 ? S 12:50 0:00 grep osmo
ok
test_terminal_length (__main__.TestVTY.test_terminal_length) ... Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45462), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45462), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
Launch: ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg from /build
Launching: PWD=/build './src/osmo-e1-recorder' '-c' '/build/doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/23115/fd
total 0
lr-x------ 1 build build 64 May 8 12:50 0 -> pipe:[2909314174]
l-wx------ 1 build build 64 May 8 12:50 1 -> pipe:[2909314175]
l-wx------ 1 build build 64 May 8 12:50 2 -> pipe:[2909314176]
l-wx------ 1 build build 64 May 8 12:50 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 23115 18.7 0.0 27860 23012 ? S 12:50 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 23126 0.0 0.0 21474886644 12408 ? S 12:50 0:00 ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg
build 23133 0.0 0.0 2576 904 ? S 12:50 0:00 /bin/sh -c ps xua | grep osmo
build 23135 0.0 0.0 3700 1780 ? S 12:50 0:00 grep osmo
ok
test_unknown_command (__main__.TestVTY.test_unknown_command) ... Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45464), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45464), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
Launch: ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg from /build
Launching: PWD=/build './src/osmo-e1-recorder' '-c' '/build/doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/23115/fd
total 0
lr-x------ 1 build build 64 May 8 12:50 0 -> pipe:[2909314174]
l-wx------ 1 build build 64 May 8 12:50 1 -> pipe:[2909314175]
l-wx------ 1 build build 64 May 8 12:50 2 -> pipe:[2909314176]
l-wx------ 1 build build 64 May 8 12:50 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 23115 11.5 0.0 27860 23012 ? S 12:50 0:00 /usr/bin/python3 /usr/local/bin/osmotestvty.py -p /build -w /build -v
build 23136 0.0 0.0 21474886644 12896 ? S 12:50 0:00 ./src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg
build 23143 0.0 0.0 2576 880 ? S 12:50 0:00 /bin/sh -c ps xua | grep osmo
build 23145 0.0 0.0 3700 1876 ? S 12:50 0:00 grep osmo
ok
----------------------------------------------------------------------
Ran 3 tests in 0.617s
OK
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45478), raddr=('127.0.0.1', 4444)> (1 sockets open)
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45478), raddr=('127.0.0.1', 4444)> (0 sockets open)
Process returned code: -15
osmotestconfig.py -p /build -w /build -v
Verifying src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg, test verify_doc
Opening /dev/null
Launching: PWD=/build 'src/osmo-e1-recorder' '-c' '/build/doc/examples/osmo-e1-recorder.cfg'
> ls -l /proc/23146/fd
total 0
lr-x------ 1 build build 64 May 8 12:50 0 -> pipe:[2909314174]
l-wx------ 1 build build 64 May 8 12:50 1 -> pipe:[2909314175]
l-wx------ 1 build build 64 May 8 12:50 2 -> pipe:[2909314176]
l-wx------ 1 build build 64 May 8 12:50 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 23146 50.0 0.0 27984 23300 ? S 12:50 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 23147 0.0 0.0 21474886644 12764 ? S 12:50 0:00 src/osmo-e1-recorder -c /build/doc/examples/osmo-e1-recorder.cfg
build 23154 0.0 0.0 2576 900 ? S 12:50 0:00 /bin/sh -c ps xua | grep osmo
build 23156 0.0 0.0 3700 1872 ? S 12:50 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45480), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45480), raddr=('127.0.0.1', 4444)> (0 sockets open)
Verifying src/osmo-e1-recorder -c /build/writtenconfig/osmo-e1-recorder.cfgrybtoulr, test write_config
Launching: PWD=/build 'src/osmo-e1-recorder' '-c' '/build/writtenconfig/osmo-e1-recorder.cfgrybtoulr'
> ls -l /proc/23146/fd
total 0
lr-x------ 1 build build 64 May 8 12:50 0 -> pipe:[2909314174]
l-wx------ 1 build build 64 May 8 12:50 1 -> pipe:[2909314175]
l-wx------ 1 build build 64 May 8 12:50 2 -> pipe:[2909314176]
l-wx------ 1 build build 64 May 8 12:50 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 23146 16.1 0.0 27984 23300 ? S 12:50 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 23157 0.0 0.0 21474886644 12904 ? S 12:50 0:00 src/osmo-e1-recorder -c /build/writtenconfig/osmo-e1-recorder.cfgrybtoulr
build 23164 0.0 0.0 2576 924 ? S 12:50 0:00 /bin/sh -c ps xua | grep osmo
build 23166 0.0 0.0 3700 1804 ? S 12:50 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45490), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45490), raddr=('127.0.0.1', 4444)> (0 sockets open)
Verifying src/osmo-e1-recorder -c /build/writtenconfig/osmo-e1-recorder.cfgrybtoulr, test token_vty_command
Launching: PWD=/build 'src/osmo-e1-recorder' '-c' '/build/writtenconfig/osmo-e1-recorder.cfgrybtoulr'
> ls -l /proc/23146/fd
total 0
lr-x------ 1 build build 64 May 8 12:50 0 -> pipe:[2909314174]
l-wx------ 1 build build 64 May 8 12:50 1 -> pipe:[2909314175]
l-wx------ 1 build build 64 May 8 12:50 2 -> pipe:[2909314176]
l-wx------ 1 build build 64 May 8 12:50 3 -> /dev/null
> ss -tn
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
> ss -tln
State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess
LISTEN 0 10 127.0.0.1:4444 0.0.0.0:*
> ps xua | grep osmo
build 23146 5.6 0.0 27984 23300 ? S 12:50 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v
build 23167 0.0 0.0 21474886644 12980 ? S 12:50 0:00 src/osmo-e1-recorder -c /build/writtenconfig/osmo-e1-recorder.cfgrybtoulr
build 23174 0.0 0.0 2576 916 ? S 12:50 0:00 /bin/sh -c ps xua | grep osmo
build 23176 0.0 0.0 3700 1796 ? S 12:50 0:00 grep osmo
Socket: in 1 tries, connected to 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45496), raddr=('127.0.0.1', 4444)> (1 sockets open)
Process returned code: -15
Socket: closing 127.0.0.1:4444 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 45496), raddr=('127.0.0.1', 4444)> (0 sockets open)
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make[2]: Leaving directory '/build/tests'
make[2]: Entering directory '/build'
make[2]: Nothing to be done for 'check-am'.
make[2]: Leaving directory '/build'
make[1]: Leaving directory '/build'
+ LD_LIBRARY_PATH=/build/deps/install/lib
+ DISTCHECK_CONFIGURE_FLAGS='--enable-vty-tests --enable-external-tests --enable-werror --enable-manuals'
+ make distcheck
make dist-bzip2 dist-gzip am__post_remove_distdir='@:'
make[1]: Entering directory '/build'
make distdir-am
make[2]: Entering directory '/build'
if test -d "osmo-e1-recorder-0.3.7-5f1d"; then find "osmo-e1-recorder-0.3.7-5f1d" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1-recorder-0.3.7-5f1d" || { sleep 5 && rm -rf "osmo-e1-recorder-0.3.7-5f1d"; }; else :; fi
test -d "osmo-e1-recorder-0.3.7-5f1d" || mkdir "osmo-e1-recorder-0.3.7-5f1d"
(cd doc && make top_distdir=../osmo-e1-recorder-0.3.7-5f1d distdir=../osmo-e1-recorder-0.3.7-5f1d/doc \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/doc'
make distdir-am
make[4]: Entering directory '/build/doc'
(cd examples && make top_distdir=../../osmo-e1-recorder-0.3.7-5f1d distdir=../../osmo-e1-recorder-0.3.7-5f1d/doc/examples \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[5]: Entering directory '/build/doc/examples'
make distdir-am
make[6]: Entering directory '/build/doc/examples'
make \
top_distdir="../../osmo-e1-recorder-0.3.7-5f1d" distdir="../../osmo-e1-recorder-0.3.7-5f1d/doc/examples" \
dist-hook
make[7]: Entering directory '/build/doc/examples'
for f in $(find . -name '*.cfg*' | sed -e 's,^.,,'); do \
j="../../osmo-e1-recorder-0.3.7-5f1d/doc/examples/$f" && \
mkdir -p "$(dirname $j)" && \
/usr/bin/install -c -m 644 ./$f $j; \
done
make[7]: Leaving directory '/build/doc/examples'
make[6]: Leaving directory '/build/doc/examples'
make[5]: Leaving directory '/build/doc/examples'
make[4]: Leaving directory '/build/doc'
make[3]: Leaving directory '/build/doc'
(cd src && make top_distdir=../osmo-e1-recorder-0.3.7-5f1d distdir=../osmo-e1-recorder-0.3.7-5f1d/src \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/src'
make distdir-am
make[4]: Entering directory '/build/src'
make[4]: Leaving directory '/build/src'
make[3]: Leaving directory '/build/src'
(cd tests && make top_distdir=../osmo-e1-recorder-0.3.7-5f1d distdir=../osmo-e1-recorder-0.3.7-5f1d/tests \
am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory '/build/tests'
make distdir-am
make[4]: Entering directory '/build/tests'
make[4]: Leaving directory '/build/tests'
make[3]: Leaving directory '/build/tests'
make \
top_distdir="osmo-e1-recorder-0.3.7-5f1d" distdir="osmo-e1-recorder-0.3.7-5f1d" \
dist-hook
make[3]: Entering directory '/build'
echo 0.3.7-5f1d > osmo-e1-recorder-0.3.7-5f1d/.tarball-version
make[3]: Leaving directory '/build'
test -n "" \
|| find "osmo-e1-recorder-0.3.7-5f1d" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/bash /build/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "osmo-e1-recorder-0.3.7-5f1d"
make[2]: Leaving directory '/build'
tardir=osmo-e1-recorder-0.3.7-5f1d && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-e1-recorder-0.3.7-5f1d.tar.bz2
tardir=osmo-e1-recorder-0.3.7-5f1d && ${TAR-tar} chof - "$tardir" | eval GZIP= gzip --best -c >osmo-e1-recorder-0.3.7-5f1d.tar.gz
make[1]: Leaving directory '/build'
if test -d "osmo-e1-recorder-0.3.7-5f1d"; then find "osmo-e1-recorder-0.3.7-5f1d" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-e1-recorder-0.3.7-5f1d" || { sleep 5 && rm -rf "osmo-e1-recorder-0.3.7-5f1d"; }; else :; fi
case 'osmo-e1-recorder-0.3.7-5f1d.tar.gz osmo-e1-recorder-0.3.7-5f1d.tar.bz2' in \
*.tar.gz*) \
eval GZIP= gzip --best -dc osmo-e1-recorder-0.3.7-5f1d.tar.gz | ${TAR-tar} xf - ;;\
*.tar.bz2*) \
bzip2 -dc osmo-e1-recorder-0.3.7-5f1d.tar.bz2 | ${TAR-tar} xf - ;;\
*.tar.lz*) \
lzip -dc osmo-e1-recorder-0.3.7-5f1d.tar.lz | ${TAR-tar} xf - ;;\
*.tar.xz*) \
xz -dc osmo-e1-recorder-0.3.7-5f1d.tar.xz | ${TAR-tar} xf - ;;\
*.tar.Z*) \
uncompress -c osmo-e1-recorder-0.3.7-5f1d.tar.Z | ${TAR-tar} xf - ;;\
*.shar.gz*) \
eval GZIP= gzip --best -dc osmo-e1-recorder-0.3.7-5f1d.shar.gz | unshar ;;\
*.zip*) \
unzip osmo-e1-recorder-0.3.7-5f1d.zip ;;\
*.tar.zst*) \
zstd -dc osmo-e1-recorder-0.3.7-5f1d.tar.zst | ${TAR-tar} xf - ;;\
esac
chmod -R a-w osmo-e1-recorder-0.3.7-5f1d
chmod u+w osmo-e1-recorder-0.3.7-5f1d
mkdir osmo-e1-recorder-0.3.7-5f1d/_build osmo-e1-recorder-0.3.7-5f1d/_build/sub osmo-e1-recorder-0.3.7-5f1d/_inst
chmod a-w osmo-e1-recorder-0.3.7-5f1d
test -d osmo-e1-recorder-0.3.7-5f1d/_build || exit 0; \
dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-5f1d/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \
&& am__cwd=`pwd` \
&& CDPATH="${ZSH_VERSION+.}:" && cd osmo-e1-recorder-0.3.7-5f1d/_build/sub \
&& ../../configure \
--with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \
--enable-vty-tests --enable-external-tests --enable-werror --enable-manuals \
--srcdir=../.. --prefix="$dc_install_base" \
&& make \
&& make dvi \
&& make check \
&& make install \
&& make installcheck \
&& make uninstall \
&& make distuninstallcheck_dir="$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$dc_destdir") \
&& make DESTDIR="$dc_destdir" install \
&& make DESTDIR="$dc_destdir" uninstall \
&& make DESTDIR="$dc_destdir" \
distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \
} || { rm -rf "$dc_destdir"; exit 1; }) \
&& rm -rf "$dc_destdir" \
&& make dist \
&& rm -rf osmo-e1-recorder-0.3.7-5f1d.tar.gz osmo-e1-recorder-0.3.7-5f1d.tar.bz2 \
&& make distcleancheck \
&& cd "$am__cwd" \
|| exit 1
configure: WARNING: unrecognized options: --enable-vty-tests
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for file... file
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for libosmocore >= 1.2.0... yes
checking for libosmovty >= 1.2.0... yes
checking for libosmogsm >= 1.2.0... yes
checking for libosmoabis >= 0.6.0... yes
checking for egrep... (cached) /usr/bin/grep -E
checking if gcc supports -fvisibility=hidden... yes
checking whether to enable code coverage support... no
checking for python3... yes
checking for osmotestvty.py... yes
checking whether to enable VTY/CTRL tests... yes
checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env)
All dependencies installed!
CFLAGS=" -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating doc/Makefile
config.status: creating tests/Makefile
config.status: creating doc/examples/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-vty-tests
make[1]: Entering directory '/build/osmo-e1-recorder-0.3.7-5f1d/_build/sub'
echo 0.3.7-5f1d > ../../.version-t && mv ../../.version-t ../../.version
make[1]: Leaving directory '/build/osmo-e1-recorder-0.3.7-5f1d/_build/sub'
/bin/bash: line 1: ../../.version-t: Permission denied
make[1]: *** [Makefile:864: ../../.version] Error 1
make: *** [Makefile:651: distcheck] Error 1
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
Finished: FAILURE
![[Jenkins]](/jenkins/static/342c126a/images/svgs/logo.svg){kind=logo}
