Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 241 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=32693): Process ended prematurely: osmo-stp_10.42.42.5(pid=32693) [trial-2379↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32693)]

Standard Output

----------------------------------------------
trial-2379 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
17:12:23.559444 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:23.571696 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
17:12:23.727085 tst                        iperf3.py: using LAC 30313
17:12:23.853477 tst                        iperf3.py: using RAC 223
17:12:23.973395 tst                        iperf3.py: using CellId 30313
17:12:24.101137 tst                        iperf3.py: using BVCI 30314
17:12:24.126575 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:24.138235 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:24.149607 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:24.161955 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:24.173429 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:24.184851 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:24.196389 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:24.207749 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
17:12:24.219394 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
17:12:24.504147 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
17:12:24.634164 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
17:12:24.955869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32685): Launched
17:12:25.224063 run iperf3-srv_10.42.42.10(pid=32686): Launched
17:12:25.412768 tst                      iperf3.py:8: start network...
17:12:25.542324 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
17:12:26.032328 run         create_hlr_db(pid=32687): Launched
17:12:26.210159 bus                          /gobi_6: Setting Powered False
17:12:27.231909 run         create_hlr_db(pid=32687): Terminated: ok {rc=0}
17:12:27.646358 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32689): Launched
17:12:27.958234 run   osmo-hlr_10.42.42.2(pid=32690): Launched
17:12:28.071880 run              osmo-stp_10.42.42.5: Starting osmo-stp
17:12:28.611832 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32692): Launched
17:12:28.924734 run   osmo-stp_10.42.42.5(pid=32693): Launched
17:12:29.038233 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
17:12:29.580073 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32695): Launched
17:12:29.690690 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
17:12:29.963941 run              patchelf(pid=32696): Launched
17:12:30.144669 run   osmo-stp_10.42.42.5(pid=32693): ERR: Terminated: ERROR {rc=1}  [trial-2379↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32693)]
17:12:30.276872 run   osmo-stp_10.42.42.5(pid=32693): stdout: 
| (launched: 2022-12-12_17:12:28.769116)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:12:30.409549 run   osmo-stp_10.42.42.5(pid=32693): stderr: 
| �[0;m�[38;5;43m20221212171228943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212171228943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212171228943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212171228943 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212171228944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212171228944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212171228944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:12:30.537329 run   osmo-stp_10.42.42.5(pid=32693): stdout: 
| (launched: 2022-12-12_17:12:28.769116)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:12:30.664036 run   osmo-stp_10.42.42.5(pid=32693): stderr: 
| �[0;m�[38;5;43m20221212171228943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212171228943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212171228943 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212171228943 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212171228944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212171228944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212171228944 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:12:30.819575 run              patchelf(pid=32696): Terminating (SIGINT)
17:12:31.039979 run              patchelf(pid=32696): Terminated: ok {rc=0}
17:12:31.075819 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=32693): Process ended prematurely: osmo-stp_10.42.42.5(pid=32693) [trial-2379↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32693)]  [trial-2379↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
17:12:31.087049 tst                      iperf3.py:8: Test FAILED (7.6 sec)
17:12:31.154149 run   osmo-hlr_10.42.42.2(pid=32690): ERR: Terminated: ERROR {rc=237}  [trial-2379↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32690)]
17:12:31.208051 run   osmo-hlr_10.42.42.2(pid=32690): stdout: 
| (launched: 2022-12-12_17:12:27.803637) 
17:12:31.262388 run   osmo-hlr_10.42.42.2(pid=32690): stderr: 
| �[0;m�[1;31m20221212171227986 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212171227986 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212171227986 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212171227986 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212171227986 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212171227986 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212171227998 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212171228006 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212171228007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212171228007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
17:12:31.308568 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32685): Terminating (SIGTERM)
17:12:31.356033 run iperf3-srv_10.42.42.10(pid=32686): Terminating (SIGTERM)
17:12:31.400880 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32689): Terminating (SIGTERM)
17:12:31.446127 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32692): Terminating (SIGTERM)
17:12:31.492564 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32695): Terminating (SIGTERM)
17:12:31.503302 ---      ParallelTerminationStrategy: PID 32685 died...
17:12:31.563905 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32685): Terminated: ok {rc=0}
17:12:31.575019 ---      ParallelTerminationStrategy: PID 32686 died...
17:12:31.632771 run iperf3-srv_10.42.42.10(pid=32686): Terminated {rc=256}
17:12:31.643543 ---      ParallelTerminationStrategy: PID 32689 died...
17:12:31.702256 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32689): Terminated: ok {rc=0}
17:12:31.712932 ---      ParallelTerminationStrategy: PID 32692 died...
17:12:31.770927 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32692): Terminated: ok {rc=0}
17:12:31.782039 ---      ParallelTerminationStrategy: PID 32695 died...
17:12:31.839931 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32695): Terminated: ok {rc=0}
17:12:31.932758 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32693): Process ended prematurely: osmo-stp_10.42.42.5(pid=32693) [trial-2379↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32693)]