Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 241 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=29432): Process ended prematurely: osmo-stp_10.42.42.5(pid=29432) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29432)]

Standard Output

----------------------------------------------
trial-2379 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
16:41:02.746702 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:02.758491 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
16:41:02.922216 tst                        iperf3.py: using LAC 30147
16:41:03.046838 tst                        iperf3.py: using RAC 57
16:41:03.170737 tst                        iperf3.py: using CellId 30147
16:41:03.294300 tst                        iperf3.py: using BVCI 30148
16:41:03.318483 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:03.329602 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:03.340426 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:03.351459 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:03.362333 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:03.373144 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:03.384117 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:03.394909 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
16:41:03.405897 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
16:41:03.689751 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
16:41:03.819744 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
16:41:04.144851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29424): Launched
16:41:04.413752 run iperf3-srv_10.42.42.10(pid=29425): Launched
16:41:04.602616 tst                      iperf3.py:8: start network...
16:41:04.731891 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:41:05.231882 run         create_hlr_db(pid=29426): Launched
16:41:05.409777 bus                          /gobi_6: Setting Powered False
16:41:06.431472 run         create_hlr_db(pid=29426): Terminated: ok {rc=0}
16:41:06.873769 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29428): Launched
16:41:07.208115 run   osmo-hlr_10.42.42.2(pid=29429): Launched
16:41:07.330058 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:41:07.909695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29431): Launched
16:41:08.243699 run   osmo-stp_10.42.42.5(pid=29432): Launched
16:41:08.365085 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:41:08.944707 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29434): Launched
16:41:09.064016 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:41:09.354382 run              patchelf(pid=29435): Launched
16:41:09.547936 run   osmo-stp_10.42.42.5(pid=29432): ERR: Terminated: ERROR {rc=1}  [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29432)]
16:41:09.690025 run   osmo-stp_10.42.42.5(pid=29432): stdout: 
| (launched: 2022-12-12_16:41:08.078579)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:41:09.832456 run   osmo-stp_10.42.42.5(pid=29432): stderr: 
| �[0;m�[38;5;43m20221212164108267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212164108268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212164108268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212164108268 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212164108269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212164108269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212164108269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:41:09.970053 run   osmo-stp_10.42.42.5(pid=29432): stdout: 
| (launched: 2022-12-12_16:41:08.078579)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:41:10.106350 run   osmo-stp_10.42.42.5(pid=29432): stderr: 
| �[0;m�[38;5;43m20221212164108267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212164108268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212164108268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212164108268 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212164108269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212164108269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212164108269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:41:10.264811 run              patchelf(pid=29435): Terminating (SIGINT)
16:41:10.450138 run              patchelf(pid=29435): Terminated: ok {rc=0}
16:41:10.484152 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29432): Process ended prematurely: osmo-stp_10.42.42.5(pid=29432) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29432)]  [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
16:41:10.494337 tst                      iperf3.py:8: Test FAILED (7.8 sec)
16:41:10.558760 run   osmo-hlr_10.42.42.2(pid=29429): ERR: Terminated: ERROR {rc=237}  [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29429)]
16:41:10.611418 run   osmo-hlr_10.42.42.2(pid=29429): stdout: 
| (launched: 2022-12-12_16:41:07.043292) 
16:41:10.664315 run   osmo-hlr_10.42.42.2(pid=29429): stderr: 
| �[0;m�[1;31m20221212164107241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212164107241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212164107241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212164107241 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212164107242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212164107242 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212164107254 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2379/run.2022-12-12_16-06-15/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212164107265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212164107266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212164107266 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:41:10.709158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29424): Terminating (SIGTERM)
16:41:10.751833 run iperf3-srv_10.42.42.10(pid=29425): Terminating (SIGTERM)
16:41:10.794603 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29428): Terminating (SIGTERM)
16:41:10.837195 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29431): Terminating (SIGTERM)
16:41:10.879778 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29434): Terminating (SIGTERM)
16:41:10.889948 ---      ParallelTerminationStrategy: PID 29424 died...
16:41:10.946403 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29424): Terminated: ok {rc=0}
16:41:10.956754 ---      ParallelTerminationStrategy: PID 29425 died...
16:41:11.013281 run iperf3-srv_10.42.42.10(pid=29425): Terminated {rc=256}
16:41:11.023361 ---      ParallelTerminationStrategy: PID 29428 died...
16:41:11.079661 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29428): Terminated: ok {rc=0}
16:41:11.090192 ---      ParallelTerminationStrategy: PID 29431 died...
16:41:11.146762 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29431): Terminated: ok {rc=0}
16:41:11.157056 ---      ParallelTerminationStrategy: PID 29434 died...
16:41:11.213751 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29434): Terminated: ok {rc=0}
16:41:11.302361 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29432): Process ended prematurely: osmo-stp_10.42.42.5(pid=29432) [trial-2379↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29432)]