Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-900+mod-bts0-egprs.ping_idle_ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)

Failing for the past 242 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15543): Process ended prematurely: osmo-stp_10.42.42.5(pid=15543) [trial-2380↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15543)]

Standard Output

----------------------------------------------
trial-2380 gprs:nanobts+band-900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
18:53:14.234576 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:53:14.246978 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
18:53:14.398987 tst                ping_idle_ping.py: using LAC 30805
18:53:14.518519 tst                ping_idle_ping.py: using RAC 205
18:53:14.638540 tst                ping_idle_ping.py: using CellId 30805
18:53:14.755885 tst                ping_idle_ping.py: using BVCI 30806
18:53:14.778846 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:53:14.790104 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:53:14.801190 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:53:14.812426 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:53:14.823678 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:53:14.834859 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:53:14.846249 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
18:53:14.857569 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
18:53:15.135860 tst             ping_idle_ping.py:24: start network...
18:53:15.261587 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:53:15.743753 run         create_hlr_db(pid=15537): Launched
18:53:15.939092 bus                          /gobi_6: Setting Powered False
18:53:16.994219 run         create_hlr_db(pid=15537): Terminated: ok {rc=0}
18:53:17.478373 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15539): Launched
18:53:17.806938 run   osmo-hlr_10.42.42.2(pid=15540): Launched
18:53:17.926004 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:53:18.491546 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15542): Launched
18:53:18.813393 run   osmo-stp_10.42.42.5(pid=15543): Launched
18:53:18.927598 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:53:19.459722 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15545): Launched
18:53:19.567795 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:53:19.835888 run              patchelf(pid=15546): Launched
18:53:20.014524 run   osmo-stp_10.42.42.5(pid=15543): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15543)]
18:53:20.143468 run   osmo-stp_10.42.42.5(pid=15543): stdout: 
| (launched: 2022-12-12_18:53:18.656705)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:53:20.272314 run   osmo-stp_10.42.42.5(pid=15543): stderr: 
| �[0;m�[38;5;43m20221212185318832 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212185318832 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212185318832 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212185318833 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212185318833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212185318833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212185318833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:53:20.396765 run   osmo-stp_10.42.42.5(pid=15543): stdout: 
| (launched: 2022-12-12_18:53:18.656705)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:53:20.520116 run   osmo-stp_10.42.42.5(pid=15543): stderr: 
| �[0;m�[38;5;43m20221212185318832 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212185318832 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212185318832 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212185318833 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212185318833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212185318833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212185318833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:53:20.663565 run              patchelf(pid=15546): Terminating (SIGINT)
18:53:20.833170 run              patchelf(pid=15546): Terminated: ok {rc=0}
18:53:20.863839 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=15543): Process ended prematurely: osmo-stp_10.42.42.5(pid=15543) [trial-2380↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15543)]  [trial-2380↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27]
18:53:20.872538 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
18:53:20.933317 run   osmo-hlr_10.42.42.2(pid=15540): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15540)]
18:53:20.982524 run   osmo-hlr_10.42.42.2(pid=15540): stdout: 
| (launched: 2022-12-12_18:53:17.643732) 
18:53:21.032374 run   osmo-hlr_10.42.42.2(pid=15540): stderr: 
| �[0;m�[1;31m20221212185317841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212185317841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212185317841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212185317841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212185317841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212185317841 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212185317853 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:nanobts+band-900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212185317862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212185317862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212185317862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:53:21.075426 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15539): Terminating (SIGTERM)
18:53:21.115680 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15542): Terminating (SIGTERM)
18:53:21.155840 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15545): Terminating (SIGTERM)
18:53:21.165600 ---      ParallelTerminationStrategy: PID 15539 died...
18:53:21.219347 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15539): Terminated: ok {rc=0}
18:53:21.229594 ---      ParallelTerminationStrategy: PID 15542 died...
18:53:21.283232 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15542): Terminated: ok {rc=0}
18:53:21.293353 ---      ParallelTerminationStrategy: PID 15545 died...
18:53:21.347266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15545): Terminated: ok {rc=0}
18:53:21.432587 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15543): Process ended prematurely: osmo-stp_10.42.42.5(pid=15543) [trial-2380↪gprs:nanobts+band-900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15543)]