Skip to content

Failed

gprs:sysmo+mod-bts0-dynts-osmo.iperf3.py (from gprs_sysmo+mod-bts0-dynts-osmo)

Failing for the past 238 builds (Since #2143 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9005): Process ended prematurely: osmo-stp_10.42.42.5(pid=9005) [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9005)]

Standard Output

----------------------------------------------
trial-2380 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
17:50:31.652156 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:31.665372 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
17:50:31.860104 tst                        iperf3.py: using LAC 30473
17:50:32.000323 tst                        iperf3.py: using RAC 128
17:50:32.153641 tst                        iperf3.py: using CellId 30473
17:50:32.284521 tst                        iperf3.py: using BVCI 30474
17:50:32.308221 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:32.319458 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:32.330572 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:32.342760 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:32.354596 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:32.366576 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:32.378533 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:32.390272 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
17:50:32.402435 tst   gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
17:50:32.703591 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
17:50:32.841612 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
17:50:33.182515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8997): Launched
17:50:33.465932 run iperf3-srv_10.42.42.10(pid=8998): Launched
17:50:33.667261 tst                      iperf3.py:8: start network...
17:50:33.804475 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
17:50:34.331030 run          create_hlr_db(pid=8999): Launched
17:50:34.508836 bus                          /gobi_6: Setting Powered False
17:50:35.529728 run          create_hlr_db(pid=8999): Terminated: ok {rc=0}
17:50:35.967448 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9001): Launched
17:50:36.300248 run    osmo-hlr_10.42.42.2(pid=9002): Launched
17:50:36.421016 run              osmo-stp_10.42.42.5: Starting osmo-stp
17:50:36.994369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9004): Launched
17:50:37.326664 run    osmo-stp_10.42.42.5(pid=9005): Launched
17:50:37.445697 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
17:50:38.022994 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9007): Launched
17:50:38.140915 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
17:50:38.428784 run               patchelf(pid=9008): Launched
17:50:38.621135 run    osmo-stp_10.42.42.5(pid=9005): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9005)]
17:50:38.761375 run    osmo-stp_10.42.42.5(pid=9005): stdout: 
| (launched: 2022-12-12_17:50:37.162158)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:50:38.902844 run    osmo-stp_10.42.42.5(pid=9005): stderr: 
| �[0;m�[38;5;43m20221212175037353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212175037353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212175037353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212175037354 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212175037354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212175037354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212175037354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:50:39.038906 run    osmo-stp_10.42.42.5(pid=9005): stdout: 
| (launched: 2022-12-12_17:50:37.162158)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:50:39.173675 run    osmo-stp_10.42.42.5(pid=9005): stderr: 
| �[0;m�[38;5;43m20221212175037353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212175037353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212175037353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212175037354 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212175037354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212175037354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212175037354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:50:39.331191 run               patchelf(pid=9008): Terminating (SIGINT)
17:50:39.515819 run               patchelf(pid=9008): Terminated: ok {rc=0}
17:50:39.549668 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9005): Process ended prematurely: osmo-stp_10.42.42.5(pid=9005) [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9005)]  [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8]
17:50:39.559608 tst                      iperf3.py:8: Test FAILED (8.0 sec)
17:50:39.622931 run    osmo-hlr_10.42.42.2(pid=9002): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9002)]
17:50:39.674625 run    osmo-hlr_10.42.42.2(pid=9002): stdout: 
| (launched: 2022-12-12_17:50:36.135902) 
17:50:39.726836 run    osmo-hlr_10.42.42.2(pid=9002): stderr: 
| �[0;m�[1;31m20221212175036333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212175036333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212175036333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212175036333 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212175036334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212175036334 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212175036346 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212175036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212175036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212175036355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
17:50:39.771417 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8997): Terminating (SIGTERM)
17:50:39.813697 run iperf3-srv_10.42.42.10(pid=8998): Terminating (SIGTERM)
17:50:39.856325 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9001): Terminating (SIGTERM)
17:50:39.898763 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9004): Terminating (SIGTERM)
17:50:39.941037 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9007): Terminating (SIGTERM)
17:50:39.950805 ---      ParallelTerminationStrategy: PID 8997 died...
17:50:40.007406 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8997): Terminated: ok {rc=0}
17:50:40.017656 ---      ParallelTerminationStrategy: PID 8998 died...
17:50:40.073791 run iperf3-srv_10.42.42.10(pid=8998): Terminated {rc=256}
17:50:40.083957 ---      ParallelTerminationStrategy: PID 9001 died...
17:50:40.139894 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9001): Terminated: ok {rc=0}
17:50:40.150018 ---      ParallelTerminationStrategy: PID 9004 died...
17:50:40.206005 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9004): Terminated: ok {rc=0}
17:50:40.216078 ---      ParallelTerminationStrategy: PID 9007 died...
17:50:40.272016 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9007): Terminated: ok {rc=0}
17:50:40.360694 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9005): Process ended prematurely: osmo-stp_10.42.42.5(pid=9005) [trial-2380↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9005)]