Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 242 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10522): Process ended prematurely: osmo-stp_10.42.42.5(pid=10522) [trial-2380↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10522)]

Standard Output

----------------------------------------------
trial-2380 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
18:08:09.053269 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.065961 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
18:08:09.219367 tst                        iperf3.py: using LAC 30566
18:08:09.352916 tst                        iperf3.py: using RAC 221
18:08:09.479805 tst                        iperf3.py: using CellId 30566
18:08:09.605921 tst                        iperf3.py: using BVCI 30567
18:08:09.631041 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.642890 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.654627 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.666366 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.677935 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.689578 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.701390 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.712690 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
18:08:09.724474 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
18:08:10.022581 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
18:08:10.159583 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:08:10.503534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10514): Launched
18:08:10.789864 run iperf3-srv_10.42.42.10(pid=10515): Launched
18:08:10.991436 tst                      iperf3.py:8: start network...
18:08:11.128638 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:08:11.650638 run         create_hlr_db(pid=10516): Launched
18:08:11.828172 bus                          /gobi_6: Setting Powered False
18:08:12.850469 run         create_hlr_db(pid=10516): Terminated: ok {rc=0}
18:08:13.260870 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10518): Launched
18:08:13.573329 run   osmo-hlr_10.42.42.2(pid=10519): Launched
18:08:13.693149 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:08:14.238290 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10521): Launched
18:08:14.548564 run   osmo-stp_10.42.42.5(pid=10522): Launched
18:08:14.660404 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:08:15.196430 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10524): Launched
18:08:15.305099 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:08:15.575435 run              patchelf(pid=10525): Launched
18:08:15.754440 run   osmo-stp_10.42.42.5(pid=10522): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10522)]
18:08:15.905282 run   osmo-stp_10.42.42.5(pid=10522): stdout: 
| (launched: 2022-12-12_18:08:14.394395)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:08:16.060711 run   osmo-stp_10.42.42.5(pid=10522): stderr: 
| �[0;m�[38;5;43m20221212180814563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212180814563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212180814563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212180814564 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212180814564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212180814564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212180814564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:08:16.232029 run   osmo-stp_10.42.42.5(pid=10522): stdout: 
| (launched: 2022-12-12_18:08:14.394395)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:08:16.386405 run   osmo-stp_10.42.42.5(pid=10522): stderr: 
| �[0;m�[38;5;43m20221212180814563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212180814563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212180814563 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212180814564 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212180814564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212180814564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212180814564 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:08:16.551341 run              patchelf(pid=10525): Terminating (SIGINT)
18:08:16.755782 run              patchelf(pid=10525): Terminated: ok {rc=0}
18:08:16.789136 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10522): Process ended prematurely: osmo-stp_10.42.42.5(pid=10522) [trial-2380↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10522)]  [trial-2380↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
18:08:16.799689 tst                      iperf3.py:8: Test FAILED (7.8 sec)
18:08:16.865441 run   osmo-hlr_10.42.42.2(pid=10519): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10519)]
18:08:16.917484 run   osmo-hlr_10.42.42.2(pid=10519): stdout: 
| (launched: 2022-12-12_18:08:13.417138) 
18:08:16.970587 run   osmo-hlr_10.42.42.2(pid=10519): stderr: 
| �[0;m�[1;31m20221212180813592 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212180813593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212180813593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212180813593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212180813593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212180813593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212180813605 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212180813614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212180813614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212180813614 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:08:17.014641 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10514): Terminating (SIGTERM)
18:08:17.059561 run iperf3-srv_10.42.42.10(pid=10515): Terminating (SIGTERM)
18:08:17.104136 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10518): Terminating (SIGTERM)
18:08:17.147119 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10521): Terminating (SIGTERM)
18:08:17.189917 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10524): Terminating (SIGTERM)
18:08:17.201152 ---      ParallelTerminationStrategy: PID 10514 died...
18:08:17.256491 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10514): Terminated: ok {rc=0}
18:08:17.268169 ---      ParallelTerminationStrategy: PID 10515 died...
18:08:17.324696 run iperf3-srv_10.42.42.10(pid=10515): Terminated {rc=256}
18:08:17.334493 ---      ParallelTerminationStrategy: PID 10518 died...
18:08:17.387930 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10518): Terminated: ok {rc=0}
18:08:17.397872 ---      ParallelTerminationStrategy: PID 10521 died...
18:08:17.451075 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10521): Terminated: ok {rc=0}
18:08:17.460639 ---      ParallelTerminationStrategy: PID 10524 died...
18:08:17.514449 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10524): Terminated: ok {rc=0}
18:08:17.603335 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10522): Process ended prematurely: osmo-stp_10.42.42.5(pid=10522) [trial-2380↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10522)]