Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)

Failing for the past 63 builds (Since #2318 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10232): Process ended prematurely: osmo-stp_10.42.42.5(pid=10232) [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10232)]

Standard Output

----------------------------------------------
trial-2380 gprs:trx-b200 cs_paging_gprs_active.py
----------------------------------------------
18:03:54.323173 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.333889 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
18:03:54.471703 tst         cs_paging_gprs_active.py: using LAC 30545
18:03:54.592221 tst         cs_paging_gprs_active.py: using RAC 200
18:03:54.713183 tst         cs_paging_gprs_active.py: using CellId 30545
18:03:54.833251 tst         cs_paging_gprs_active.py: using BVCI 30546
18:03:54.856281 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.866986 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.877523 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.888219 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.898783 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.909422 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.920116 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.930861 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
18:03:54.941628 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
18:03:55.063959 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
18:03:55.342718 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003...
18:03:55.469857 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:03:55.787345 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10222): Launched
18:03:56.052633 run iperf3-srv_10.42.42.10(pid=10223): Launched
18:03:56.239019 tst      cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004...
18:03:56.365860 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:03:56.683525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10224): Launched
18:03:56.946150 run iperf3-srv_10.42.42.10(pid=10225): Launched
18:03:57.131668 tst      cs_paging_gprs_active.py:38: start network...
18:03:57.258543 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:03:57.739807 run         create_hlr_db(pid=10226): Launched
18:03:57.914269 bus                        /sierra_2: Setting Powered False
18:03:58.937384 run         create_hlr_db(pid=10226): Terminated: ok {rc=0}
18:03:59.343786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10228): Launched
18:03:59.651085 run   osmo-hlr_10.42.42.2(pid=10229): Launched
18:03:59.770052 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:04:00.305861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10231): Launched
18:04:00.611468 run   osmo-stp_10.42.42.5(pid=10232): Launched
18:04:00.722635 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:04:01.313348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10234): Launched
18:04:01.433909 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:04:01.741902 run              patchelf(pid=10235): Launched
18:04:01.938093 run   osmo-stp_10.42.42.5(pid=10232): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10232)]
18:04:02.081062 run   osmo-stp_10.42.42.5(pid=10232): stdout: 
| (launched: 2022-12-12_18:04:00.460190)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:04:02.224754 run   osmo-stp_10.42.42.5(pid=10232): stderr: 
| �[0;m�[38;5;43m20221212180400630 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212180400631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212180400631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212180400631 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:04:02.360057 run   osmo-stp_10.42.42.5(pid=10232): stdout: 
| (launched: 2022-12-12_18:04:00.460190)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:04:02.493527 run   osmo-stp_10.42.42.5(pid=10232): stderr: 
| �[0;m�[38;5;43m20221212180400630 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212180400631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212180400631 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212180400631 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212180400632 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:04:02.648719 run              patchelf(pid=10235): Terminating (SIGINT)
18:04:02.829973 run              patchelf(pid=10235): Terminated: ok {rc=0}
18:04:02.863796 tst      cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10232): Process ended prematurely: osmo-stp_10.42.42.5(pid=10232) [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10232)]  [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38]
18:04:02.874136 tst      cs_paging_gprs_active.py:38: Test FAILED (8.6 sec)
18:04:02.937635 run   osmo-hlr_10.42.42.2(pid=10229): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10229)]
18:04:02.989299 run   osmo-hlr_10.42.42.2(pid=10229): stdout: 
| (launched: 2022-12-12_18:03:59.498057) 
18:04:03.041570 run   osmo-hlr_10.42.42.2(pid=10229): stderr: 
| �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212180359671 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212180359683 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212180359692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212180359692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212180359692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:04:03.086317 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10222): Terminating (SIGTERM)
18:04:03.128648 run iperf3-srv_10.42.42.10(pid=10223): Terminating (SIGTERM)
18:04:03.172314 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10224): Terminating (SIGTERM)
18:04:03.214662 run iperf3-srv_10.42.42.10(pid=10225): Terminating (SIGTERM)
18:04:03.257425 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10228): Terminating (SIGTERM)
18:04:03.299395 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10231): Terminating (SIGTERM)
18:04:03.341378 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10234): Terminating (SIGTERM)
18:04:03.351140 ---      ParallelTerminationStrategy: PID 10222 died...
18:04:03.407509 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10222): Terminated: ok {rc=0}
18:04:03.417770 ---      ParallelTerminationStrategy: PID 10223 died...
18:04:03.473399 run iperf3-srv_10.42.42.10(pid=10223): Terminated {rc=256}
18:04:03.483355 ---      ParallelTerminationStrategy: PID 10224 died...
18:04:03.539390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10224): Terminated: ok {rc=0}
18:04:03.549574 ---      ParallelTerminationStrategy: PID 10225 died...
18:04:03.605192 run iperf3-srv_10.42.42.10(pid=10225): Terminated {rc=256}
18:04:03.615184 ---      ParallelTerminationStrategy: PID 10228 died...
18:04:03.671284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10228): Terminated: ok {rc=0}
18:04:03.681384 ---      ParallelTerminationStrategy: PID 10231 died...
18:04:03.737408 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10231): Terminated: ok {rc=0}
18:04:03.747433 ---      ParallelTerminationStrategy: PID 10234 died...
18:04:03.803365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10234): Terminated: ok {rc=0}
18:04:03.891347 bus                          /gobi_0: Setting Powered False
18:04:04.996040 bus                          /gobi_0: Setting Powered False
18:04:06.106835 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module>
    setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10232): Process ended prematurely: osmo-stp_10.42.42.5(pid=10232) [trial-2380↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10232)]