Skip to content

Failed

gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)

Failing for the past 242 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=14105): Process ended prematurely: osmo-stp_10.42.42.5(pid=14105) [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14105)]

Standard Output

----------------------------------------------
trial-2380 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
18:40:10.929932 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:10.942238 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
18:40:11.106117 tst                        iperf3.py: using LAC 30736
18:40:11.235445 tst                        iperf3.py: using RAC 136
18:40:11.364610 tst                        iperf3.py: using CellId 30736
18:40:11.495223 tst                        iperf3.py: using BVCI 30737
18:40:11.520137 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:11.531877 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:11.543372 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:11.554852 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:11.566708 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:11.578187 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:11.589783 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:11.601168 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:40:11.612576 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
18:40:11.892898 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
18:40:12.019622 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:40:12.342897 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14097): Launched
18:40:12.625155 run iperf3-srv_10.42.42.10(pid=14098): Launched
18:40:12.823657 tst                      iperf3.py:8: start network...
18:40:12.958757 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:40:13.477989 run         create_hlr_db(pid=14099): Launched
18:40:13.665639 bus                          /gobi_6: Setting Powered False
18:40:14.686806 run         create_hlr_db(pid=14099): Terminated: ok {rc=0}
18:40:15.118427 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14101): Launched
18:40:15.447363 run   osmo-hlr_10.42.42.2(pid=14102): Launched
18:40:15.565314 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:40:16.159769 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14104): Launched
18:40:16.571536 run   osmo-stp_10.42.42.5(pid=14105): Launched
18:40:16.871363 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:40:17.453698 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14107): Launched
18:40:17.569129 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:40:17.855786 run              patchelf(pid=14109): Launched
18:40:18.044888 run   osmo-stp_10.42.42.5(pid=14105): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14105)]
18:40:18.183135 run   osmo-stp_10.42.42.5(pid=14105): stdout: 
| (launched: 2022-12-12_18:40:16.321391)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:40:18.321992 run   osmo-stp_10.42.42.5(pid=14105): stderr: 
| �[0;m�[38;5;43m20221212184016637 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212184016637 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212184016638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212184016638 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212184016638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212184016638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212184016639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:40:18.455550 run   osmo-stp_10.42.42.5(pid=14105): stdout: 
| (launched: 2022-12-12_18:40:16.321391)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:40:18.587817 run   osmo-stp_10.42.42.5(pid=14105): stderr: 
| �[0;m�[38;5;43m20221212184016637 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212184016637 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212184016638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212184016638 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212184016638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212184016638 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212184016639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:40:18.742803 run              patchelf(pid=14109): Terminating (SIGINT)
18:40:18.924071 run              patchelf(pid=14109): Terminated: ok {rc=0}
18:40:18.957623 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14105): Process ended prematurely: osmo-stp_10.42.42.5(pid=14105) [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14105)]  [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8]
18:40:18.967668 tst                      iperf3.py:8: Test FAILED (8.1 sec)
18:40:19.030766 run   osmo-hlr_10.42.42.2(pid=14102): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14102)]
18:40:19.082356 run   osmo-hlr_10.42.42.2(pid=14102): stdout: 
| (launched: 2022-12-12_18:40:15.284046) 
18:40:19.134523 run   osmo-hlr_10.42.42.2(pid=14102): stderr: 
| �[0;m�[1;31m20221212184015482 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212184015482 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212184015482 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212184015482 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212184015482 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212184015482 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212184015498 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212184015508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212184015508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212184015508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:40:19.178718 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14097): Terminating (SIGTERM)
18:40:19.220486 run iperf3-srv_10.42.42.10(pid=14098): Terminating (SIGTERM)
18:40:19.262359 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14101): Terminating (SIGTERM)
18:40:19.304478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14104): Terminating (SIGTERM)
18:40:19.346434 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14107): Terminating (SIGTERM)
18:40:19.356139 ---      ParallelTerminationStrategy: PID 14097 died...
18:40:19.412294 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14097): Terminated: ok {rc=0}
18:40:19.422308 ---      ParallelTerminationStrategy: PID 14098 died...
18:40:19.478051 run iperf3-srv_10.42.42.10(pid=14098): Terminated {rc=256}
18:40:19.488023 ---      ParallelTerminationStrategy: PID 14101 died...
18:40:19.543654 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14101): Terminated: ok {rc=0}
18:40:19.553659 ---      ParallelTerminationStrategy: PID 14104 died...
18:40:19.609125 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14104): Terminated: ok {rc=0}
18:40:19.619061 ---      ParallelTerminationStrategy: PID 14107 died...
18:40:19.674565 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14107): Terminated: ok {rc=0}
18:40:19.762538 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14105): Process ended prematurely: osmo-stp_10.42.42.5(pid=14105) [trial-2380↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14105)]