Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)

Failing for the past 242 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=11294): Process ended prematurely: osmo-stp_10.42.42.5(pid=11294) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11294)]

Standard Output

----------------------------------------------
trial-2380 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
18:15:05.601097 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:05.613751 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
18:15:05.783784 tst                        iperf3.py: using LAC 30603
18:15:05.911140 tst                        iperf3.py: using RAC 3
18:15:06.040839 tst                        iperf3.py: using CellId 30603
18:15:06.169273 tst                        iperf3.py: using BVCI 30604
18:15:06.194445 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:06.206216 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:06.218121 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:06.229714 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:06.241273 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:06.252761 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:06.264465 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:06.275973 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:15:06.287663 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
18:15:06.587169 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
18:15:06.724344 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:15:07.066166 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11286): Launched
18:15:07.351324 run iperf3-srv_10.42.42.10(pid=11287): Launched
18:15:07.552631 tst                      iperf3.py:8: start network...
18:15:07.690134 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:15:08.218368 run         create_hlr_db(pid=11288): Launched
18:15:08.408391 bus                          /gobi_6: Setting Powered False
18:15:09.430260 run         create_hlr_db(pid=11288): Terminated: ok {rc=0}
18:15:09.845131 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11290): Launched
18:15:10.155040 run   osmo-hlr_10.42.42.2(pid=11291): Launched
18:15:10.276051 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:15:10.816078 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11293): Launched
18:15:11.126216 run   osmo-stp_10.42.42.5(pid=11294): Launched
18:15:11.238041 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:15:11.776306 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11296): Launched
18:15:11.886119 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:15:12.163097 run              patchelf(pid=11297): Launched
18:15:12.355657 run   osmo-stp_10.42.42.5(pid=11294): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11294)]
18:15:12.510828 run   osmo-stp_10.42.42.5(pid=11294): stdout: 
| (launched: 2022-12-12_18:15:10.972232)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:15:12.648850 run   osmo-stp_10.42.42.5(pid=11294): stderr: 
| �[0;m�[38;5;43m20221212181511144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212181511145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212181511145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212181511146 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212181511146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212181511146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212181511146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:15:12.781878 run   osmo-stp_10.42.42.5(pid=11294): stdout: 
| (launched: 2022-12-12_18:15:10.972232)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:15:12.913698 run   osmo-stp_10.42.42.5(pid=11294): stderr: 
| �[0;m�[38;5;43m20221212181511144 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212181511145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212181511145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212181511146 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212181511146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212181511146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212181511146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:15:13.067214 run              patchelf(pid=11297): Terminating (SIGINT)
18:15:13.247190 run              patchelf(pid=11297): Terminated: ok {rc=0}
18:15:13.280233 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11294): Process ended prematurely: osmo-stp_10.42.42.5(pid=11294) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11294)]  [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
18:15:13.290076 tst                      iperf3.py:8: Test FAILED (7.7 sec)
18:15:13.354015 run   osmo-hlr_10.42.42.2(pid=11291): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11291)]
18:15:13.405322 run   osmo-hlr_10.42.42.2(pid=11291): stdout: 
| (launched: 2022-12-12_18:15:10.001340) 
18:15:13.457679 run   osmo-hlr_10.42.42.2(pid=11291): stderr: 
| �[0;m�[1;31m20221212181510175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212181510175 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212181510176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212181510176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212181510176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212181510176 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212181510187 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212181510196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212181510196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212181510196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:15:13.501630 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11286): Terminating (SIGTERM)
18:15:13.543824 run iperf3-srv_10.42.42.10(pid=11287): Terminating (SIGTERM)
18:15:13.586382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11290): Terminating (SIGTERM)
18:15:13.628673 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11293): Terminating (SIGTERM)
18:15:13.670761 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11296): Terminating (SIGTERM)
18:15:13.680993 ---      ParallelTerminationStrategy: PID 11286 died...
18:15:13.737662 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11286): Terminated: ok {rc=0}
18:15:13.747939 ---      ParallelTerminationStrategy: PID 11287 died...
18:15:13.803657 run iperf3-srv_10.42.42.10(pid=11287): Terminated {rc=256}
18:15:13.814278 ---      ParallelTerminationStrategy: PID 11290 died...
18:15:13.870137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11290): Terminated: ok {rc=0}
18:15:13.880096 ---      ParallelTerminationStrategy: PID 11293 died...
18:15:13.935490 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11293): Terminated: ok {rc=0}
18:15:13.946092 ---      ParallelTerminationStrategy: PID 11296 died...
18:15:14.002064 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11296): Terminated: ok {rc=0}
18:15:14.089901 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11294): Process ended prematurely: osmo-stp_10.42.42.5(pid=11294) [trial-2380↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11294)]