Skip to content

Failed

gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)

Failing for the past 197 builds (Since #2186 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=26947): Process ended prematurely: osmo-stp_10.42.42.5(pid=26947) [trial-2382↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26947)]

Standard Output

----------------------------------------------
trial-2382 gprs:trx-b200 ping_idle_ping.py
----------------------------------------------
21:00:11.784696 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
21:00:11.796571 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
21:00:11.938182 tst                ping_idle_ping.py: using LAC 31471
21:00:12.062896 tst                ping_idle_ping.py: using RAC 106
21:00:12.187912 tst                ping_idle_ping.py: using CellId 31471
21:00:12.313651 tst                ping_idle_ping.py: using BVCI 31472
21:00:12.338211 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
21:00:12.348892 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
21:00:12.359594 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
21:00:12.370242 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
21:00:12.380701 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
21:00:12.391580 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
21:00:12.402274 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
21:00:12.412827 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
21:00:12.713945 tst             ping_idle_ping.py:24: start network...
21:00:12.854292 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
21:00:13.383527 run         create_hlr_db(pid=26941): Launched
21:00:13.577513 bus                          /gobi_6: Setting Powered False
21:00:14.599411 run         create_hlr_db(pid=26941): Terminated: ok {rc=0}
21:00:15.017304 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26943): Launched
21:00:15.328685 run   osmo-hlr_10.42.42.2(pid=26944): Launched
21:00:15.450955 run              osmo-stp_10.42.42.5: Starting osmo-stp
21:00:16.054583 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26946): Launched
21:00:16.523868 run   osmo-stp_10.42.42.5(pid=26947): Launched
21:00:16.647750 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
21:00:17.265618 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26949): Launched
21:00:17.380286 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
21:00:17.655032 run              patchelf(pid=26950): Launched
21:00:17.838330 run   osmo-stp_10.42.42.5(pid=26947): ERR: Terminated: ERROR {rc=1}  [trial-2382↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26947)]
21:00:17.971245 run   osmo-stp_10.42.42.5(pid=26947): stdout: 
| (launched: 2022-12-12_21:00:16.217735)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:00:18.104928 run   osmo-stp_10.42.42.5(pid=26947): stderr: 
| �[0;m�[38;5;43m20221212210016408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212210016408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212210016409 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212210016409 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212210016410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212210016410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212210016410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:00:18.233857 run   osmo-stp_10.42.42.5(pid=26947): stdout: 
| (launched: 2022-12-12_21:00:16.217735)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
21:00:18.362207 run   osmo-stp_10.42.42.5(pid=26947): stderr: 
| �[0;m�[38;5;43m20221212210016408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212210016408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212210016409 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212210016409 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212210016410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212210016410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212210016410 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
21:00:18.510967 run              patchelf(pid=26950): Terminating (SIGINT)
21:00:18.687234 run              patchelf(pid=26950): Terminated: ok {rc=0}
21:00:18.718904 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26947): Process ended prematurely: osmo-stp_10.42.42.5(pid=26947) [trial-2382↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26947)]  [trial-2382↪gprs:trx-b200↪ping_idle_ping.py:27]
21:00:18.727670 tst             ping_idle_ping.py:27: Test FAILED (6.9 sec)
21:00:18.788885 run   osmo-hlr_10.42.42.2(pid=26944): ERR: Terminated: ERROR {rc=237}  [trial-2382↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26944)]
21:00:18.839669 run   osmo-hlr_10.42.42.2(pid=26944): stdout: 
| (launched: 2022-12-12_21:00:15.175450) 
21:00:18.890648 run   osmo-hlr_10.42.42.2(pid=26944): stderr: 
| �[0;m�[1;31m20221212210015355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212210015355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212210015355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212210015355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212210015355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212210015355 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212210015370 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2382/run.2022-12-12_20-36-34/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212210015379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212210015379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212210015379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
21:00:18.933633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26943): Terminating (SIGTERM)
21:00:18.974142 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26946): Terminating (SIGTERM)
21:00:19.014747 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26949): Terminating (SIGTERM)
21:00:19.024216 ---      ParallelTerminationStrategy: PID 26943 died...
21:00:19.079002 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26943): Terminated: ok {rc=0}
21:00:19.088879 ---      ParallelTerminationStrategy: PID 26946 died...
21:00:19.143532 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26946): Terminated: ok {rc=0}
21:00:19.153384 ---      ParallelTerminationStrategy: PID 26949 died...
21:00:19.207629 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26949): Terminated: ok {rc=0}
21:00:19.293735 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26947): Process ended prematurely: osmo-stp_10.42.42.5(pid=26947) [trial-2382↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26947)]