Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=2627): Process ended prematurely: osmo-stp_10.42.42.5(pid=2627) [trial-2383↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2627)]
Standard Output
---------------------------------------------- trial-2383 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 22:28:10.164869 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.175848 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 22:28:10.319569 tst cs_paging_gprs_active.py: using LAC 31928 22:28:10.446288 tst cs_paging_gprs_active.py: using RAC 53 22:28:10.572697 tst cs_paging_gprs_active.py: using CellId 31928 22:28:10.699367 tst cs_paging_gprs_active.py: using BVCI 31929 22:28:10.724478 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.735524 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.746420 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.757253 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.767941 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.779104 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.790113 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.800852 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 22:28:10.811845 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 22:28:10.930352 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 22:28:11.209164 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:28:11.336510 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:28:11.651517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2614): Launched 22:28:11.914581 run iperf3-srv_10.42.42.10(pid=2615): Launched 22:28:12.101854 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:28:12.230326 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:28:12.546671 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2616): Launched 22:28:12.807975 run iperf3-srv_10.42.42.10(pid=2617): Launched 22:28:12.993589 tst cs_paging_gprs_active.py:38: start network... 22:28:13.120118 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:28:13.601659 run create_hlr_db(pid=2619): Launched 22:28:13.777276 bus /sierra_2: Setting Powered False 22:28:14.798144 run create_hlr_db(pid=2619): Terminated: ok {rc=0} 22:28:15.229395 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2622): Launched 22:28:15.556139 run osmo-hlr_10.42.42.2(pid=2623): Launched 22:28:15.676564 run osmo-stp_10.42.42.5: Starting osmo-stp 22:28:16.254683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2626): Launched 22:28:16.721231 run osmo-stp_10.42.42.5(pid=2627): Launched 22:28:16.957592 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:28:17.530596 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2629): Launched 22:28:17.646900 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:28:17.930964 run patchelf(pid=2630): Launched 22:28:18.122097 run osmo-stp_10.42.42.5(pid=2627): ERR: Terminated: ERROR {rc=1} [trial-2383↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2627)] 22:28:18.261716 run osmo-stp_10.42.42.5(pid=2627): stdout: | (launched: 2022-12-12_22:28:16.415689) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:28:18.401645 run osmo-stp_10.42.42.5(pid=2627): stderr: | �[0;m�[38;5;43m20221212222816668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212222816669 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212222816669 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212222816670 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212222816672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212222816672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212222816672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:28:18.537167 run osmo-stp_10.42.42.5(pid=2627): stdout: | (launched: 2022-12-12_22:28:16.415689) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:28:18.671362 run osmo-stp_10.42.42.5(pid=2627): stderr: | �[0;m�[38;5;43m20221212222816668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221212222816669 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221212222816669 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221212222816670 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221212222816672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221212222816672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221212222816672 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:28:18.828100 run patchelf(pid=2630): Terminating (SIGINT) 22:28:19.012809 run patchelf(pid=2630): Terminated: ok {rc=0} 22:28:19.046498 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2627): Process ended prematurely: osmo-stp_10.42.42.5(pid=2627) [trial-2383↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2627)] [trial-2383↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 22:28:19.056405 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 22:28:19.118864 run osmo-hlr_10.42.42.2(pid=2623): ERR: Terminated: ERROR {rc=237} [trial-2383↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2623)] 22:28:19.169973 run osmo-hlr_10.42.42.2(pid=2623): stdout: | (launched: 2022-12-12_22:28:15.395181) 22:28:19.221455 run osmo-hlr_10.42.42.2(pid=2623): stderr: | �[0;m�[1;31m20221212222815593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221212222815593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221212222815593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221212222815593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221212222815593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221212222815593 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221212222815606 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221212222815615 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221212222815615 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221212222815615 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:28:19.265604 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2614): Terminating (SIGTERM) 22:28:19.307335 run iperf3-srv_10.42.42.10(pid=2615): Terminating (SIGTERM) 22:28:19.349176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2616): Terminating (SIGTERM) 22:28:19.391034 run iperf3-srv_10.42.42.10(pid=2617): Terminating (SIGTERM) 22:28:19.432756 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2622): Terminating (SIGTERM) 22:28:19.474417 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2626): Terminating (SIGTERM) 22:28:19.516158 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2629): Terminating (SIGTERM) 22:28:19.525814 --- ParallelTerminationStrategy: PID 2614 died... 22:28:19.581141 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2614): Terminated: ok {rc=0} 22:28:19.591081 --- ParallelTerminationStrategy: PID 2615 died... 22:28:19.645906 run iperf3-srv_10.42.42.10(pid=2615): Terminated {rc=256} 22:28:19.655781 --- ParallelTerminationStrategy: PID 2616 died... 22:28:19.710682 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2616): Terminated: ok {rc=0} 22:28:19.720559 --- ParallelTerminationStrategy: PID 2617 died... 22:28:19.775400 run iperf3-srv_10.42.42.10(pid=2617): Terminated {rc=256} 22:28:19.785327 --- ParallelTerminationStrategy: PID 2622 died... 22:28:19.839999 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2622): Terminated: ok {rc=0} 22:28:19.849893 --- ParallelTerminationStrategy: PID 2626 died... 22:28:19.904927 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2626): Terminated: ok {rc=0} 22:28:19.914933 --- ParallelTerminationStrategy: PID 2629 died... 22:28:19.969776 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2629): Terminated: ok {rc=0} 22:28:20.054169 bus /gobi_0: Setting Powered False 22:28:21.161041 bus /gobi_0: Setting Powered False 22:28:22.270268 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2627): Process ended prematurely: osmo-stp_10.42.42.5(pid=2627) [trial-2383↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2627)]