Skip to content

Failed

gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)

Failing for the past 245 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5210): Process ended prematurely: osmo-stp_10.42.42.5(pid=5210) [trial-2383↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5210)]

Standard Output

----------------------------------------------
trial-2383 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
22:57:26.520306 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:26.531654 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
22:57:26.691618 tst                        iperf3.py: using LAC 32082
22:57:26.818608 tst                        iperf3.py: using RAC 207
22:57:26.938105 tst                        iperf3.py: using CellId 32082
22:57:27.057088 tst                        iperf3.py: using BVCI 32083
22:57:27.080570 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:27.091361 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:27.102380 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:27.113530 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:27.124302 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:27.135186 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:27.146462 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:27.157291 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:57:27.168289 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
22:57:27.462887 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
22:57:27.599281 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:57:27.936083 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5202): Launched
22:57:28.215098 run iperf3-srv_10.42.42.10(pid=5203): Launched
22:57:28.414012 tst                      iperf3.py:8: start network...
22:57:28.549701 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:57:29.069357 run          create_hlr_db(pid=5204): Launched
22:57:29.256882 bus                          /gobi_6: Setting Powered False
22:57:30.278622 run          create_hlr_db(pid=5204): Terminated: ok {rc=0}
22:57:30.689137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5206): Launched
22:57:31.182393 run    osmo-hlr_10.42.42.2(pid=5207): Launched
22:57:31.410971 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:57:32.030718 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5209): Launched
22:57:32.368235 run    osmo-stp_10.42.42.5(pid=5210): Launched
22:57:32.481145 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:57:33.012140 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5212): Launched
22:57:33.120875 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:57:33.387584 run               patchelf(pid=5213): Launched
22:57:33.566332 run    osmo-stp_10.42.42.5(pid=5210): ERR: Terminated: ERROR {rc=1}  [trial-2383↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5210)]
22:57:33.696680 run    osmo-stp_10.42.42.5(pid=5210): stdout: 
| (launched: 2022-12-12_22:57:32.201216)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:57:33.826923 run    osmo-stp_10.42.42.5(pid=5210): stderr: 
| �[0;m�[38;5;43m20221212225732393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212225732393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212225732393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212225732394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212225732394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212225732394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212225732394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:57:33.952648 run    osmo-stp_10.42.42.5(pid=5210): stdout: 
| (launched: 2022-12-12_22:57:32.201216)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:57:34.077701 run    osmo-stp_10.42.42.5(pid=5210): stderr: 
| �[0;m�[38;5;43m20221212225732393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212225732393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212225732393 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212225732394 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212225732394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212225732394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212225732394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:57:34.224654 run               patchelf(pid=5213): Terminating (SIGINT)
22:57:34.397681 run               patchelf(pid=5213): Terminated: ok {rc=0}
22:57:34.428908 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=5210): Process ended prematurely: osmo-stp_10.42.42.5(pid=5210) [trial-2383↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5210)]  [trial-2383↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8]
22:57:34.438009 tst                      iperf3.py:8: Test FAILED (8.0 sec)
22:57:34.497420 run    osmo-hlr_10.42.42.2(pid=5207): ERR: Terminated: ERROR {rc=237}  [trial-2383↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5207)]
22:57:34.546005 run    osmo-hlr_10.42.42.2(pid=5207): stdout: 
| (launched: 2022-12-12_22:57:30.850146) 
22:57:34.594988 run    osmo-hlr_10.42.42.2(pid=5207): stderr: 
| �[0;m�[1;31m20221212225731220 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212225731220 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212225731220 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212225731221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212225731221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212225731221 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212225731253 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2383/run.2022-12-12_22-05-43/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212225731269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212225731270 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212225731270 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:57:34.636607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5202): Terminating (SIGTERM)
22:57:34.675890 run iperf3-srv_10.42.42.10(pid=5203): Terminating (SIGTERM)
22:57:34.715284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5206): Terminating (SIGTERM)
22:57:34.754558 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5209): Terminating (SIGTERM)
22:57:34.793860 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5212): Terminating (SIGTERM)
22:57:34.803334 ---      ParallelTerminationStrategy: PID 5202 died...
22:57:34.855924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5202): Terminated: ok {rc=0}
22:57:34.865824 ---      ParallelTerminationStrategy: PID 5203 died...
22:57:34.918269 run iperf3-srv_10.42.42.10(pid=5203): Terminated {rc=256}
22:57:34.928026 ---      ParallelTerminationStrategy: PID 5206 died...
22:57:34.980177 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5206): Terminated: ok {rc=0}
22:57:34.989913 ---      ParallelTerminationStrategy: PID 5209 died...
22:57:35.042300 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5209): Terminated: ok {rc=0}
22:57:35.051994 ---      ParallelTerminationStrategy: PID 5212 died...
22:57:35.104530 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5212): Terminated: ok {rc=0}
22:57:35.193078 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5210): Process ended prematurely: osmo-stp_10.42.42.5(pid=5210) [trial-2383↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5210)]