Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 246 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=16254): Process ended prematurely: osmo-stp_10.42.42.5(pid=16254) [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16254)]

Standard Output

----------------------------------------------
trial-2384 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
01:16:00.505842 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:00.518259 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
01:16:00.687259 tst                        iperf3.py: using LAC 32618
01:16:00.816401 tst                        iperf3.py: using RAC 233
01:16:00.960819 tst                        iperf3.py: using CellId 32618
01:16:01.096878 tst                        iperf3.py: using BVCI 32619
01:16:01.121459 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:01.133212 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:01.144846 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:01.157140 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:01.169358 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:01.182160 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:01.194457 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:01.206521 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:16:01.218470 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
01:16:01.549429 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:16:01.686006 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:16:02.034863 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16246): Launched
01:16:02.319344 run iperf3-srv_10.42.42.10(pid=16247): Launched
01:16:02.523748 tst                      iperf3.py:8: start network...
01:16:02.663077 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:16:03.187830 run         create_hlr_db(pid=16248): Launched
01:16:03.380559 bus                          /gobi_6: Setting Powered False
01:16:04.401734 run         create_hlr_db(pid=16248): Terminated: ok {rc=0}
01:16:04.845506 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16250): Launched
01:16:05.180738 run   osmo-hlr_10.42.42.2(pid=16251): Launched
01:16:05.301074 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:16:05.856609 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16253): Launched
01:16:06.162702 run   osmo-stp_10.42.42.5(pid=16254): Launched
01:16:06.273205 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:16:06.806853 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16256): Launched
01:16:06.915716 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:16:07.182759 run              patchelf(pid=16257): Launched
01:16:07.361355 run   osmo-stp_10.42.42.5(pid=16254): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16254)]
01:16:07.491823 run   osmo-stp_10.42.42.5(pid=16254): stdout: 
| (launched: 2022-12-13_01:16:06.011760)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:16:07.622280 run   osmo-stp_10.42.42.5(pid=16254): stderr: 
| �[0;m�[38;5;43m20221213011606180 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213011606180 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213011606181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213011606181 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213011606181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213011606182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213011606182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:16:07.748587 run   osmo-stp_10.42.42.5(pid=16254): stdout: 
| (launched: 2022-12-13_01:16:06.011760)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:16:07.874124 run   osmo-stp_10.42.42.5(pid=16254): stderr: 
| �[0;m�[38;5;43m20221213011606180 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213011606180 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213011606181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213011606181 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213011606181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213011606182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213011606182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:16:08.021106 run              patchelf(pid=16257): Terminating (SIGINT)
01:16:08.194726 run              patchelf(pid=16257): Terminated: ok {rc=0}
01:16:08.226403 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16254): Process ended prematurely: osmo-stp_10.42.42.5(pid=16254) [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16254)]  [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
01:16:08.235527 tst                      iperf3.py:8: Test FAILED (7.8 sec)
01:16:08.295430 run   osmo-hlr_10.42.42.2(pid=16251): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16251)]
01:16:08.344374 run   osmo-hlr_10.42.42.2(pid=16251): stdout: 
| (launched: 2022-12-13_01:16:05.015404) 
01:16:08.394121 run   osmo-hlr_10.42.42.2(pid=16251): stderr: 
| �[0;m�[1;31m20221213011605214 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213011605214 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213011605214 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213011605214 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213011605214 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213011605214 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213011605226 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213011605235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213011605235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213011605235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:16:08.436446 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16246): Terminating (SIGTERM)
01:16:08.476566 run iperf3-srv_10.42.42.10(pid=16247): Terminating (SIGTERM)
01:16:08.516691 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16250): Terminating (SIGTERM)
01:16:08.556667 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16253): Terminating (SIGTERM)
01:16:08.596736 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16256): Terminating (SIGTERM)
01:16:08.606274 ---      ParallelTerminationStrategy: PID 16246 died...
01:16:08.659938 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16246): Terminated: ok {rc=0}
01:16:08.669870 ---      ParallelTerminationStrategy: PID 16247 died...
01:16:08.723181 run iperf3-srv_10.42.42.10(pid=16247): Terminated {rc=256}
01:16:08.733220 ---      ParallelTerminationStrategy: PID 16250 died...
01:16:08.786161 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16250): Terminated: ok {rc=0}
01:16:08.795832 ---      ParallelTerminationStrategy: PID 16253 died...
01:16:08.849167 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16253): Terminated: ok {rc=0}
01:16:08.858910 ---      ParallelTerminationStrategy: PID 16256 died...
01:16:08.911859 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16256): Terminated: ok {rc=0}
01:16:08.995776 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16254): Process ended prematurely: osmo-stp_10.42.42.5(pid=16254) [trial-2384↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16254)]