Skip to content

Failed

gprs:trx-lms+mod-bts0-dynts-osmo.ping.py (from gprs_trx-lms+mod-bts0-dynts-osmo)

Failing for the past 246 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15035): Process ended prematurely: osmo-stp_10.42.42.5(pid=15035) [trial-2384↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15035)]

Standard Output

----------------------------------------------
trial-2384 gprs:trx-lms+mod-bts0-dynts-osmo ping.py
----------------------------------------------
01:02:17.878985 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:02:17.890553 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
01:02:18.048659 tst                          ping.py: using LAC 32545
01:02:18.168328 tst                          ping.py: using RAC 160
01:02:18.286055 tst                          ping.py: using CellId 32545
01:02:18.403512 tst                          ping.py: using BVCI 32546
01:02:18.426532 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:02:18.437398 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:02:18.448153 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:02:18.458847 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:02:18.469428 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:02:18.480076 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:02:18.490846 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
01:02:18.501643 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
01:02:18.775454 tst                       ping.py:19: start network...
01:02:18.899883 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:02:19.380711 run         create_hlr_db(pid=15029): Launched
01:02:19.554593 bus                          /gobi_6: Setting Powered False
01:02:20.574698 run         create_hlr_db(pid=15029): Terminated: ok {rc=0}
01:02:21.005085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15031): Launched
01:02:21.327353 run   osmo-hlr_10.42.42.2(pid=15032): Launched
01:02:21.445117 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:02:22.008597 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15034): Launched
01:02:22.330832 run   osmo-stp_10.42.42.5(pid=15035): Launched
01:02:22.448484 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:02:23.012571 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15037): Launched
01:02:23.128195 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:02:23.411331 run              patchelf(pid=15038): Launched
01:02:23.600239 run   osmo-stp_10.42.42.5(pid=15035): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15035)]
01:02:23.738432 run   osmo-stp_10.42.42.5(pid=15035): stdout: 
| (launched: 2022-12-13_01:02:22.172110)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:02:23.876926 run   osmo-stp_10.42.42.5(pid=15035): stderr: 
| �[0;m�[38;5;43m20221213010222362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213010222362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213010222362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213010222363 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213010222363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213010222363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213010222363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:02:24.010643 run   osmo-stp_10.42.42.5(pid=15035): stdout: 
| (launched: 2022-12-13_01:02:22.172110)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:02:24.143105 run   osmo-stp_10.42.42.5(pid=15035): stderr: 
| �[0;m�[38;5;43m20221213010222362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213010222362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213010222362 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213010222363 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213010222363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213010222363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213010222363 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:02:24.297520 run              patchelf(pid=15038): Terminating (SIGINT)
01:02:24.479687 run              patchelf(pid=15038): Terminated: ok {rc=0}
01:02:24.512338 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=15035): Process ended prematurely: osmo-stp_10.42.42.5(pid=15035) [trial-2384↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15035)]  [trial-2384↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22]
01:02:24.521567 tst                       ping.py:22: Test FAILED (6.6 sec)
01:02:24.585095 run   osmo-hlr_10.42.42.2(pid=15032): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15032)]
01:02:24.636827 run   osmo-hlr_10.42.42.2(pid=15032): stdout: 
| (launched: 2022-12-13_01:02:21.168897) 
01:02:24.689071 run   osmo-hlr_10.42.42.2(pid=15032): stderr: 
| �[0;m�[1;31m20221213010221363 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213010221363 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213010221363 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213010221363 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213010221363 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213010221363 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213010221376 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213010221384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213010221384 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213010221385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:02:24.733246 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15031): Terminating (SIGTERM)
01:02:24.775172 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15034): Terminating (SIGTERM)
01:02:24.817501 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15037): Terminating (SIGTERM)
01:02:24.827305 ---      ParallelTerminationStrategy: PID 15031 died...
01:02:24.883940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15031): Terminated: ok {rc=0}
01:02:24.894301 ---      ParallelTerminationStrategy: PID 15034 died...
01:02:24.950548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15034): Terminated: ok {rc=0}
01:02:24.960888 ---      ParallelTerminationStrategy: PID 15037 died...
01:02:25.016867 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15037): Terminated: ok {rc=0}
01:02:25.105240 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15035): Process ended prematurely: osmo-stp_10.42.42.5(pid=15035) [trial-2384↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15035)]