Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 246 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=13010): Process ended prematurely: osmo-stp_10.42.42.5(pid=13010) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13010)]

Standard Output

----------------------------------------------
trial-2384 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
00:44:30.652132 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:30.664184 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
00:44:30.826596 tst                        iperf3.py: using LAC 32452
00:44:30.970290 tst                        iperf3.py: using RAC 67
00:44:31.112218 tst                        iperf3.py: using CellId 32452
00:44:31.245765 tst                        iperf3.py: using BVCI 32453
00:44:31.272277 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:31.284907 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:31.298723 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:31.312322 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:31.326183 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:31.338715 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:31.352804 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:31.367410 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
00:44:31.382665 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
00:44:31.694612 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:44:31.852660 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:44:32.235294 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Launched
00:44:32.522075 run iperf3-srv_10.42.42.10(pid=13001): Launched
00:44:32.725628 tst                      iperf3.py:8: start network...
00:44:32.864499 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:44:33.386066 run         create_hlr_db(pid=13002): Launched
00:44:33.576241 bus                          /gobi_6: Setting Powered False
00:44:34.591063 run         create_hlr_db(pid=13002): Terminated: ok {rc=0}
00:44:35.032302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13006): Launched
00:44:35.362748 run   osmo-hlr_10.42.42.2(pid=13007): Launched
00:44:35.487297 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:44:36.061914 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13009): Launched
00:44:36.391769 run   osmo-stp_10.42.42.5(pid=13010): Launched
00:44:36.512431 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:44:37.089302 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13012): Launched
00:44:37.208248 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:44:37.498112 run              patchelf(pid=13013): Launched
00:44:37.690597 run   osmo-stp_10.42.42.5(pid=13010): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13010)]
00:44:37.831402 run   osmo-stp_10.42.42.5(pid=13010): stdout: 
| (launched: 2022-12-13_00:44:36.229884)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:44:37.972292 run   osmo-stp_10.42.42.5(pid=13010): stderr: 
| �[0;m�[38;5;43m20221213004436419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213004436420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213004436420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213004436420 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213004436421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213004436421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213004436421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:44:38.109156 run   osmo-stp_10.42.42.5(pid=13010): stdout: 
| (launched: 2022-12-13_00:44:36.229884)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:44:38.245159 run   osmo-stp_10.42.42.5(pid=13010): stderr: 
| �[0;m�[38;5;43m20221213004436419 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213004436420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213004436420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213004436420 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213004436421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213004436421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213004436421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:44:38.403551 run              patchelf(pid=13013): Terminating (SIGINT)
00:44:38.589629 run              patchelf(pid=13013): Terminated: ok {rc=0}
00:44:38.623664 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13010): Process ended prematurely: osmo-stp_10.42.42.5(pid=13010) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13010)]  [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
00:44:38.634150 tst                      iperf3.py:8: Test FAILED (8.0 sec)
00:44:38.698227 run   osmo-hlr_10.42.42.2(pid=13007): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13007)]
00:44:38.750263 run   osmo-hlr_10.42.42.2(pid=13007): stdout: 
| (launched: 2022-12-13_00:44:35.200562) 
00:44:38.802662 run   osmo-hlr_10.42.42.2(pid=13007): stderr: 
| �[0;m�[1;31m20221213004435396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213004435396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213004435396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213004435396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213004435396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213004435396 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213004435407 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213004435416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213004435416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213004435416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:44:38.846893 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Terminating (SIGTERM)
00:44:38.889150 run iperf3-srv_10.42.42.10(pid=13001): Terminating (SIGTERM)
00:44:38.931277 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13006): Terminating (SIGTERM)
00:44:38.973613 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13009): Terminating (SIGTERM)
00:44:39.015931 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13012): Terminating (SIGTERM)
00:44:39.026239 ---      ParallelTerminationStrategy: PID 13000 died...
00:44:39.082783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Terminated: ok {rc=0}
00:44:39.093249 ---      ParallelTerminationStrategy: PID 13001 died...
00:44:39.149008 run iperf3-srv_10.42.42.10(pid=13001): Terminated {rc=256}
00:44:39.159652 ---      ParallelTerminationStrategy: PID 13006 died...
00:44:39.216299 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13006): Terminated: ok {rc=0}
00:44:39.227160 ---      ParallelTerminationStrategy: PID 13009 died...
00:44:39.283950 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13009): Terminated: ok {rc=0}
00:44:39.294204 ---      ParallelTerminationStrategy: PID 13012 died...
00:44:39.350937 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13012): Terminated: ok {rc=0}
00:44:39.438384 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13010): Process ended prematurely: osmo-stp_10.42.42.5(pid=13010) [trial-2384↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13010)]