Skip to content

Failed

gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)

Failing for the past 247 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=16690): Process ended prematurely: osmo-stp_10.42.42.5(pid=16690) [trial-2384↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16690)]

Standard Output

----------------------------------------------
trial-2384 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
01:22:14.289174 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.300889 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
01:22:14.467550 tst                        iperf3.py: using LAC 32651
01:22:14.599609 tst                        iperf3.py: using RAC 11
01:22:14.723396 tst                        iperf3.py: using CellId 32651
01:22:14.846635 tst                        iperf3.py: using BVCI 32652
01:22:14.870420 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.881539 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.892434 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.903213 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.914028 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.924752 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.935618 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.946364 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:22:14.957256 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
01:22:15.255450 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:22:15.393895 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:22:15.738080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16682): Launched
01:22:16.067769 run iperf3-srv_10.42.42.10(pid=16683): Launched
01:22:16.275226 tst                      iperf3.py:8: start network...
01:22:16.416604 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:22:16.963250 run         create_hlr_db(pid=16684): Launched
01:22:17.156763 bus                          /gobi_6: Setting Powered False
01:22:18.175194 run         create_hlr_db(pid=16684): Terminated: ok {rc=0}
01:22:18.589319 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16686): Launched
01:22:18.897614 run   osmo-hlr_10.42.42.2(pid=16687): Launched
01:22:19.010307 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:22:19.546373 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16689): Launched
01:22:19.855272 run   osmo-stp_10.42.42.5(pid=16690): Launched
01:22:19.966119 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:22:20.502250 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16692): Launched
01:22:20.611427 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:22:20.883664 run              patchelf(pid=16693): Launched
01:22:21.063505 run   osmo-stp_10.42.42.5(pid=16690): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16690)]
01:22:21.195091 run   osmo-stp_10.42.42.5(pid=16690): stdout: 
| (launched: 2022-12-13_01:22:19.702569)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:22:21.325832 run   osmo-stp_10.42.42.5(pid=16690): stderr: 
| �[0;m�[38;5;43m20221213012219872 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213012219872 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213012219872 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213012219873 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213012219873 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213012219873 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213012219874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:22:21.452446 run   osmo-stp_10.42.42.5(pid=16690): stdout: 
| (launched: 2022-12-13_01:22:19.702569)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:22:21.578342 run   osmo-stp_10.42.42.5(pid=16690): stderr: 
| �[0;m�[38;5;43m20221213012219872 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213012219872 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213012219872 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213012219873 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213012219873 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213012219873 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213012219874 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:22:21.725548 run              patchelf(pid=16693): Terminating (SIGINT)
01:22:21.898804 run              patchelf(pid=16693): Terminated: ok {rc=0}
01:22:21.930463 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16690): Process ended prematurely: osmo-stp_10.42.42.5(pid=16690) [trial-2384↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16690)]  [trial-2384↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8]
01:22:21.939570 tst                      iperf3.py:8: Test FAILED (7.7 sec)
01:22:21.999830 run   osmo-hlr_10.42.42.2(pid=16687): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16687)]
01:22:22.048880 run   osmo-hlr_10.42.42.2(pid=16687): stdout: 
| (launched: 2022-12-13_01:22:18.745900) 
01:22:22.099490 run   osmo-hlr_10.42.42.2(pid=16687): stderr: 
| �[0;m�[1;31m20221213012218918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213012218918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213012218918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213012218918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213012218918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213012218918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213012218930 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213012218940 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213012218941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213012218941 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:22:22.142174 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16682): Terminating (SIGTERM)
01:22:22.181898 run iperf3-srv_10.42.42.10(pid=16683): Terminating (SIGTERM)
01:22:22.221702 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16686): Terminating (SIGTERM)
01:22:22.261473 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16689): Terminating (SIGTERM)
01:22:22.301291 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16692): Terminating (SIGTERM)
01:22:22.310691 ---      ParallelTerminationStrategy: PID 16682 died...
01:22:22.363928 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16682): Terminated: ok {rc=0}
01:22:22.373769 ---      ParallelTerminationStrategy: PID 16683 died...
01:22:22.427044 run iperf3-srv_10.42.42.10(pid=16683): Terminated {rc=256}
01:22:22.436746 ---      ParallelTerminationStrategy: PID 16686 died...
01:22:22.489727 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16686): Terminated: ok {rc=0}
01:22:22.499459 ---      ParallelTerminationStrategy: PID 16689 died...
01:22:22.552409 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16689): Terminated: ok {rc=0}
01:22:22.562207 ---      ParallelTerminationStrategy: PID 16692 died...
01:22:22.615234 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16692): Terminated: ok {rc=0}
01:22:22.699099 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16690): Process ended prematurely: osmo-stp_10.42.42.5(pid=16690) [trial-2384↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16690)]