Skip to content

Failed

gprs:sysmo+mod-bts0-egprs.iperf3.py (from gprs_sysmo+mod-bts0-egprs)

Failing for the past 243 builds (Since #2143 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10526): Process ended prematurely: osmo-stp_10.42.42.5(pid=10526) [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10526)]

Standard Output

----------------------------------------------
trial-2384 gprs:sysmo+mod-bts0-egprs iperf3.py
----------------------------------------------
00:16:58.398246 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:58.409582 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
00:16:58.532870 tst                        iperf3.py: using LAC 32307
00:16:58.658057 tst                        iperf3.py: using RAC 177
00:16:58.774685 tst                        iperf3.py: using CellId 32307
00:16:58.905462 tst                        iperf3.py: using BVCI 32308
00:16:58.930478 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:58.942024 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:58.953153 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:58.964587 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:58.976008 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:58.987274 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:58.998736 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:59.009894 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
00:16:59.021270 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
00:16:59.302698 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:16:59.428089 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:16:59.740055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10515): Launched
00:17:00.000016 run iperf3-srv_10.42.42.10(pid=10516): Launched
00:17:00.184128 tst                      iperf3.py:8: start network...
00:17:00.309663 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:17:00.794316 run         create_hlr_db(pid=10517): Launched
00:17:00.969946 bus                          /gobi_6: Setting Powered False
00:17:01.996513 run         create_hlr_db(pid=10517): Terminated: ok {rc=0}
00:17:02.420709 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10522): Launched
00:17:02.725256 run   osmo-hlr_10.42.42.2(pid=10523): Launched
00:17:02.840068 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:17:03.366404 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10525): Launched
00:17:03.670153 run   osmo-stp_10.42.42.5(pid=10526): Launched
00:17:03.780195 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:17:04.308244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10528): Launched
00:17:04.416006 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:17:04.680113 run              patchelf(pid=10529): Launched
00:17:04.856508 run   osmo-stp_10.42.42.5(pid=10526): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10526)]
00:17:04.985341 run   osmo-stp_10.42.42.5(pid=10526): stdout: 
| (launched: 2022-12-13_00:17:03.519106)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:17:05.114408 run   osmo-stp_10.42.42.5(pid=10526): stderr: 
| �[0;m�[38;5;43m20221213001703690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213001703690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213001703690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213001703691 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213001703691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213001703691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213001703691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:17:05.239235 run   osmo-stp_10.42.42.5(pid=10526): stdout: 
| (launched: 2022-12-13_00:17:03.519106)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:17:05.362920 run   osmo-stp_10.42.42.5(pid=10526): stderr: 
| �[0;m�[38;5;43m20221213001703690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213001703690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213001703690 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213001703691 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213001703691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213001703691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213001703691 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:17:05.507420 run              patchelf(pid=10529): Terminating (SIGINT)
00:17:05.677807 run              patchelf(pid=10529): Terminated: ok {rc=0}
00:17:05.708767 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10526): Process ended prematurely: osmo-stp_10.42.42.5(pid=10526) [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10526)]  [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8]
00:17:05.717802 tst                      iperf3.py:8: Test FAILED (7.4 sec)
00:17:05.777057 run   osmo-hlr_10.42.42.2(pid=10523): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10523)]
00:17:05.825804 run   osmo-hlr_10.42.42.2(pid=10523): stdout: 
| (launched: 2022-12-13_00:17:02.573912) 
00:17:05.875211 run   osmo-hlr_10.42.42.2(pid=10523): stderr: 
| �[0;m�[1;31m20221213001702750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213001702750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213001702750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213001702750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213001702750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213001702750 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213001702761 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:sysmo+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213001702769 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213001702769 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213001702770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:17:05.917411 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10515): Terminating (SIGTERM)
00:17:05.957304 run iperf3-srv_10.42.42.10(pid=10516): Terminating (SIGTERM)
00:17:05.997327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10522): Terminating (SIGTERM)
00:17:06.037170 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10525): Terminating (SIGTERM)
00:17:06.077433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10528): Terminating (SIGTERM)
00:17:06.086757 ---      ParallelTerminationStrategy: PID 10515 died...
00:17:06.140281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10515): Terminated: ok {rc=0}
00:17:06.150111 ---      ParallelTerminationStrategy: PID 10516 died...
00:17:06.203275 run iperf3-srv_10.42.42.10(pid=10516): Terminated {rc=256}
00:17:06.213076 ---      ParallelTerminationStrategy: PID 10522 died...
00:17:06.265743 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10522): Terminated: ok {rc=0}
00:17:06.275286 ---      ParallelTerminationStrategy: PID 10525 died...
00:17:06.327986 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10525): Terminated: ok {rc=0}
00:17:06.337747 ---      ParallelTerminationStrategy: PID 10528 died...
00:17:06.390977 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10528): Terminated: ok {rc=0}
00:17:06.474570 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10526): Process ended prematurely: osmo-stp_10.42.42.5(pid=10526) [trial-2384↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10526)]