Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 247 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=12180): Process ended prematurely: osmo-stp_10.42.42.5(pid=12180) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12180)]

Standard Output

----------------------------------------------
trial-2384 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
00:36:29.696789 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:29.709504 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
00:36:29.867784 tst                        iperf3.py: using LAC 32410
00:36:29.995294 tst                        iperf3.py: using RAC 25
00:36:30.125119 tst                        iperf3.py: using CellId 32410
00:36:30.257269 tst                        iperf3.py: using BVCI 32411
00:36:30.282915 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:30.294731 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:30.306496 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:30.318498 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:30.330335 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:30.342115 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:30.354132 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:30.365884 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
00:36:30.377994 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
00:36:30.677922 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
00:36:30.817446 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
00:36:31.203592 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12172): Launched
00:36:31.542907 run iperf3-srv_10.42.42.10(pid=12173): Launched
00:36:31.770935 tst                      iperf3.py:8: start network...
00:36:31.906624 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:36:32.426729 run         create_hlr_db(pid=12174): Launched
00:36:32.605294 bus                          /gobi_6: Setting Powered False
00:36:33.626707 run         create_hlr_db(pid=12174): Terminated: ok {rc=0}
00:36:34.068318 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12176): Launched
00:36:34.402268 run   osmo-hlr_10.42.42.2(pid=12177): Launched
00:36:34.524328 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:36:35.103802 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12179): Launched
00:36:35.438136 run   osmo-stp_10.42.42.5(pid=12180): Launched
00:36:35.559283 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:36:36.140679 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12182): Launched
00:36:36.260367 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:36:36.550787 run              patchelf(pid=12183): Launched
00:36:36.744714 run   osmo-stp_10.42.42.5(pid=12180): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12180)]
00:36:36.886051 run   osmo-stp_10.42.42.5(pid=12180): stdout: 
| (launched: 2022-12-13_00:36:35.274097)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:36:37.027853 run   osmo-stp_10.42.42.5(pid=12180): stderr: 
| �[0;m�[38;5;43m20221213003635463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213003635463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213003635463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213003635464 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213003635464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213003635464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213003635464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:36:37.165356 run   osmo-stp_10.42.42.5(pid=12180): stdout: 
| (launched: 2022-12-13_00:36:35.274097)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:36:37.302121 run   osmo-stp_10.42.42.5(pid=12180): stderr: 
| �[0;m�[38;5;43m20221213003635463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213003635463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213003635463 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213003635464 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213003635464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213003635464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213003635464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:36:37.461925 run              patchelf(pid=12183): Terminating (SIGINT)
00:36:37.649321 run              patchelf(pid=12183): Terminated: ok {rc=0}
00:36:37.683429 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=12180): Process ended prematurely: osmo-stp_10.42.42.5(pid=12180) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12180)]  [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
00:36:37.693463 tst                      iperf3.py:8: Test FAILED (8.0 sec)
00:36:37.757964 run   osmo-hlr_10.42.42.2(pid=12177): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12177)]
00:36:37.810409 run   osmo-hlr_10.42.42.2(pid=12177): stdout: 
| (launched: 2022-12-13_00:36:34.239151) 
00:36:37.863360 run   osmo-hlr_10.42.42.2(pid=12177): stderr: 
| �[0;m�[1;31m20221213003634434 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213003634434 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213003634434 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213003634434 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213003634434 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213003634434 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213003634446 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213003634455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213003634455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213003634455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:36:37.908163 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12172): Terminating (SIGTERM)
00:36:37.950662 run iperf3-srv_10.42.42.10(pid=12173): Terminating (SIGTERM)
00:36:37.993133 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12176): Terminating (SIGTERM)
00:36:38.035673 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12179): Terminating (SIGTERM)
00:36:38.078280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12182): Terminating (SIGTERM)
00:36:38.088287 ---      ParallelTerminationStrategy: PID 12172 died...
00:36:38.145039 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12172): Terminated: ok {rc=0}
00:36:38.155147 ---      ParallelTerminationStrategy: PID 12173 died...
00:36:38.211939 run iperf3-srv_10.42.42.10(pid=12173): Terminated {rc=256}
00:36:38.222028 ---      ParallelTerminationStrategy: PID 12176 died...
00:36:38.278387 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12176): Terminated: ok {rc=0}
00:36:38.288830 ---      ParallelTerminationStrategy: PID 12179 died...
00:36:38.345355 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12179): Terminated: ok {rc=0}
00:36:38.355793 ---      ParallelTerminationStrategy: PID 12182 died...
00:36:38.412430 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12182): Terminated: ok {rc=0}
00:36:38.501036 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12180): Process ended prematurely: osmo-stp_10.42.42.5(pid=12180) [trial-2384↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12180)]