Skip to content

Failed

gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)

Failing for the past 247 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15752): Process ended prematurely: osmo-stp_10.42.42.5(pid=15752) [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15752)]

Standard Output

----------------------------------------------
trial-2384 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
01:08:43.403352 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:43.415862 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
01:08:43.587054 tst                        iperf3.py: using LAC 32580
01:08:43.713845 tst                        iperf3.py: using RAC 195
01:08:43.835146 tst                        iperf3.py: using CellId 32580
01:08:43.958709 tst                        iperf3.py: using BVCI 32581
01:08:43.982523 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:43.993792 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:44.004860 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:44.016486 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:44.028104 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:44.039451 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:44.051118 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:44.062434 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
01:08:44.074005 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
01:08:44.372425 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
01:08:44.509967 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
01:08:44.850121 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15474): Launched
01:08:45.135616 run iperf3-srv_10.42.42.10(pid=15475): Launched
01:08:45.338197 tst                      iperf3.py:8: start network...
01:08:45.476261 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:08:46.033482 run         create_hlr_db(pid=15476): Launched
01:08:46.229828 bus                          /gobi_6: Setting Powered False
01:08:47.283984 run         create_hlr_db(pid=15476): Terminated: ok {rc=0}
01:08:47.785572 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15556): Launched
01:08:48.268209 run   osmo-hlr_10.42.42.2(pid=15579): Launched
01:08:48.554891 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:08:49.380577 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15726): Launched
01:08:49.811123 run   osmo-stp_10.42.42.5(pid=15752): Launched
01:08:50.047765 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:08:50.655169 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15754): Launched
01:08:50.770037 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:08:51.060280 run              patchelf(pid=15755): Launched
01:08:51.245304 run   osmo-stp_10.42.42.5(pid=15752): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15752)]
01:08:51.380245 run   osmo-stp_10.42.42.5(pid=15752): stdout: 
| (launched: 2022-12-13_01:08:49.557203)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:08:51.514804 run   osmo-stp_10.42.42.5(pid=15752): stderr: 
| �[0;m�[38;5;43m20221213010849877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213010849877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213010849877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213010849878 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213010849878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213010849878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213010849878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:08:51.647922 run   osmo-stp_10.42.42.5(pid=15752): stdout: 
| (launched: 2022-12-13_01:08:49.557203)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:08:51.778984 run   osmo-stp_10.42.42.5(pid=15752): stderr: 
| �[0;m�[38;5;43m20221213010849877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213010849877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213010849877 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213010849878 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213010849878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213010849878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213010849878 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:08:51.934507 run              patchelf(pid=15755): Terminating (SIGINT)
01:08:52.114139 run              patchelf(pid=15755): Terminated: ok {rc=0}
01:08:52.148229 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15752): Process ended prematurely: osmo-stp_10.42.42.5(pid=15752) [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15752)]  [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8]
01:08:52.158728 tst                      iperf3.py:8: Test FAILED (8.8 sec)
01:08:52.221508 run   osmo-hlr_10.42.42.2(pid=15579): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15579)]
01:08:52.272475 run   osmo-hlr_10.42.42.2(pid=15579): stdout: 
| (launched: 2022-12-13_01:08:47.972772) 
01:08:52.324236 run   osmo-hlr_10.42.42.2(pid=15579): stderr: 
| �[0;m�[1;31m20221213010848372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213010848372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213010848372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213010848372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213010848372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213010848372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213010848392 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213010848404 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213010848414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213010848414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:08:52.369405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15474): Terminating (SIGTERM)
01:08:52.412325 run iperf3-srv_10.42.42.10(pid=15475): Terminating (SIGTERM)
01:08:52.455861 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15556): Terminating (SIGTERM)
01:08:52.498838 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15726): Terminating (SIGTERM)
01:08:52.541675 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15754): Terminating (SIGTERM)
01:08:52.554151 ---      ParallelTerminationStrategy: PID 15474 died...
01:08:52.611196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15474): Terminated: ok {rc=0}
01:08:52.622157 ---      ParallelTerminationStrategy: PID 15475 died...
01:08:52.677186 run iperf3-srv_10.42.42.10(pid=15475): Terminated {rc=256}
01:08:52.687809 ---      ParallelTerminationStrategy: PID 15556 died...
01:08:52.743405 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15556): Terminated: ok {rc=0}
01:08:52.754618 ---      ParallelTerminationStrategy: PID 15726 died...
01:08:52.809661 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15726): Terminated: ok {rc=0}
01:08:52.819987 ---      ParallelTerminationStrategy: PID 15754 died...
01:08:52.874991 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15754): Terminated: ok {rc=0}
01:08:52.963193 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15752): Process ended prematurely: osmo-stp_10.42.42.5(pid=15752) [trial-2384↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15752)]