Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 250 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=12757): Process ended prematurely: osmo-stp_10.42.42.5(pid=12757) [trial-2388↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12757)]

Standard Output

----------------------------------------------
trial-2388 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
11:11:08.301227 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.312757 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
11:11:08.462526 tst                        iperf3.py: using LAC 33540
11:11:08.577423 tst                        iperf3.py: using RAC 135
11:11:08.692264 tst                        iperf3.py: using CellId 33540
11:11:08.812082 tst                        iperf3.py: using BVCI 33541
11:11:08.834810 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.845759 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.856509 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.867230 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.878005 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.888665 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.899503 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.910117 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
11:11:08.920858 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
11:11:09.193956 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
11:11:09.317777 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:11:09.625405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12749): Launched
11:11:09.880716 run iperf3-srv_10.42.42.10(pid=12750): Launched
11:11:10.061228 tst                      iperf3.py:8: start network...
11:11:10.184733 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:11:10.659583 run         create_hlr_db(pid=12751): Launched
11:11:10.829489 bus                          /gobi_6: Setting Powered False
11:11:11.850064 run         create_hlr_db(pid=12751): Terminated: ok {rc=0}
11:11:12.274526 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12753): Launched
11:11:12.593387 run   osmo-hlr_10.42.42.2(pid=12754): Launched
11:11:12.713460 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:11:13.266185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12756): Launched
11:11:13.583886 run   osmo-stp_10.42.42.5(pid=12757): Launched
11:11:13.700547 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:11:14.255192 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12759): Launched
11:11:14.369320 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:11:14.646639 run              patchelf(pid=12760): Launched
11:11:14.833296 run   osmo-stp_10.42.42.5(pid=12757): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12757)]
11:11:14.969605 run   osmo-stp_10.42.42.5(pid=12757): stdout: 
| (launched: 2022-12-13_11:11:13.427986)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:11:15.106193 run   osmo-stp_10.42.42.5(pid=12757): stderr: 
| �[0;m�[38;5;43m20221213111113619 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213111113619 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213111113620 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213111113620 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213111113621 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213111113621 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213111113621 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:11:15.238039 run   osmo-stp_10.42.42.5(pid=12757): stdout: 
| (launched: 2022-12-13_11:11:13.427986)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:11:15.368506 run   osmo-stp_10.42.42.5(pid=12757): stderr: 
| �[0;m�[38;5;43m20221213111113619 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213111113619 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213111113620 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213111113620 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213111113621 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213111113621 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213111113621 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:11:15.520836 run              patchelf(pid=12760): Terminating (SIGINT)
11:11:15.700438 run              patchelf(pid=12760): Terminated: ok {rc=0}
11:11:15.733402 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=12757): Process ended prematurely: osmo-stp_10.42.42.5(pid=12757) [trial-2388↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12757)]  [trial-2388↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
11:11:15.743145 tst                      iperf3.py:8: Test FAILED (7.5 sec)
11:11:15.805949 run   osmo-hlr_10.42.42.2(pid=12754): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12754)]
11:11:15.857920 run   osmo-hlr_10.42.42.2(pid=12754): stdout: 
| (launched: 2022-12-13_11:11:12.436650) 
11:11:15.929186 run   osmo-hlr_10.42.42.2(pid=12754): stderr: 
| �[0;m�[1;31m20221213111112634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213111112634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213111112634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213111112634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213111112634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213111112634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213111112646 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213111112654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213111112655 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213111112655 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:11:15.973153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12749): Terminating (SIGTERM)
11:11:16.016110 run iperf3-srv_10.42.42.10(pid=12750): Terminating (SIGTERM)
11:11:16.058129 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12753): Terminating (SIGTERM)
11:11:16.101603 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12756): Terminating (SIGTERM)
11:11:16.145962 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12759): Terminating (SIGTERM)
11:11:16.155982 ---      ParallelTerminationStrategy: PID 12749 died...
11:11:16.212623 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12749): Terminated: ok {rc=0}
11:11:16.223175 ---      ParallelTerminationStrategy: PID 12750 died...
11:11:16.277468 run iperf3-srv_10.42.42.10(pid=12750): Terminated {rc=256}
11:11:16.288667 ---      ParallelTerminationStrategy: PID 12753 died...
11:11:16.342982 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12753): Terminated: ok {rc=0}
11:11:16.353437 ---      ParallelTerminationStrategy: PID 12756 died...
11:11:16.407894 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12756): Terminated: ok {rc=0}
11:11:16.418173 ---      ParallelTerminationStrategy: PID 12759 died...
11:11:16.472670 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12759): Terminated: ok {rc=0}
11:11:16.573237 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12757): Process ended prematurely: osmo-stp_10.42.42.5(pid=12757) [trial-2388↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12757)]