Skip to content

Failed

gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)

Failing for the past 250 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=11916): Process ended prematurely: osmo-stp_10.42.42.5(pid=11916) [trial-2388↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11916)]

Standard Output

----------------------------------------------
trial-2388 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py
----------------------------------------------
11:02:59.226791 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.238972 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1)
11:02:59.381092 tst                        iperf3.py: using LAC 33497
11:02:59.506636 tst                        iperf3.py: using RAC 92
11:02:59.634620 tst                        iperf3.py: using CellId 33497
11:02:59.759210 tst                        iperf3.py: using BVCI 33498
11:02:59.783692 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.795222 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.806437 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.817704 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.829179 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.840616 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.852181 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.863577 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
11:02:59.875399 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4)
11:03:00.169607 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
11:03:00.304877 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
11:03:00.639925 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11907): Launched
11:03:00.934534 run iperf3-srv_10.42.42.10(pid=11908): Launched
11:03:01.124026 tst                      iperf3.py:8: start network...
11:03:01.253213 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
11:03:01.781344 run         create_hlr_db(pid=11910): Launched
11:03:01.962061 bus                          /gobi_6: Setting Powered False
11:03:02.976853 run         create_hlr_db(pid=11910): Terminated: ok {rc=0}
11:03:03.375988 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11912): Launched
11:03:03.677927 run   osmo-hlr_10.42.42.2(pid=11913): Launched
11:03:03.794205 run              osmo-stp_10.42.42.5: Starting osmo-stp
11:03:04.322680 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11915): Launched
11:03:04.622144 run   osmo-stp_10.42.42.5(pid=11916): Launched
11:03:04.730895 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
11:03:05.251780 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11918): Launched
11:03:05.358242 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
11:03:05.618921 run              patchelf(pid=11919): Launched
11:03:05.794650 run   osmo-stp_10.42.42.5(pid=11916): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11916)]
11:03:05.922674 run   osmo-stp_10.42.42.5(pid=11916): stdout: 
| (launched: 2022-12-13_11:03:04.475182)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:03:06.050652 run   osmo-stp_10.42.42.5(pid=11916): stderr: 
| �[0;m�[38;5;43m20221213110304647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213110304647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213110304648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213110304648 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213110304649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213110304649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213110304649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:03:06.174067 run   osmo-stp_10.42.42.5(pid=11916): stdout: 
| (launched: 2022-12-13_11:03:04.475182)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
11:03:06.296563 run   osmo-stp_10.42.42.5(pid=11916): stderr: 
| �[0;m�[38;5;43m20221213110304647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213110304647 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213110304648 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213110304648 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213110304649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213110304649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213110304649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
11:03:06.440353 run              patchelf(pid=11919): Terminating (SIGINT)
11:03:06.609296 run              patchelf(pid=11919): Terminated: ok {rc=0}
11:03:06.640105 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11916): Process ended prematurely: osmo-stp_10.42.42.5(pid=11916) [trial-2388↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11916)]  [trial-2388↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8]
11:03:06.649232 tst                      iperf3.py:8: Test FAILED (7.5 sec)
11:03:06.708878 run   osmo-hlr_10.42.42.2(pid=11913): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11913)]
11:03:06.757302 run   osmo-hlr_10.42.42.2(pid=11913): stdout: 
| (launched: 2022-12-13_11:03:03.528675) 
11:03:06.806497 run   osmo-hlr_10.42.42.2(pid=11913): stderr: 
| �[0;m�[1;31m20221213110303707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213110303707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213110303707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213110303707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213110303707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213110303707 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213110303719 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213110303728 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213110303729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213110303729 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
11:03:06.848613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11907): Terminating (SIGTERM)
11:03:06.887909 run iperf3-srv_10.42.42.10(pid=11908): Terminating (SIGTERM)
11:03:06.927423 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11912): Terminating (SIGTERM)
11:03:06.966900 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11915): Terminating (SIGTERM)
11:03:07.006285 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11918): Terminating (SIGTERM)
11:03:07.015011 ---      ParallelTerminationStrategy: PID 11907 died...
11:03:07.067884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11907): Terminated: ok {rc=0}
11:03:07.077480 ---      ParallelTerminationStrategy: PID 11908 died...
11:03:07.129960 run iperf3-srv_10.42.42.10(pid=11908): Terminated {rc=256}
11:03:07.139331 ---      ParallelTerminationStrategy: PID 11912 died...
11:03:07.191789 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11912): Terminated: ok {rc=0}
11:03:07.201345 ---      ParallelTerminationStrategy: PID 11915 died...
11:03:07.253820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11915): Terminated: ok {rc=0}
11:03:07.263334 ---      ParallelTerminationStrategy: PID 11918 died...
11:03:07.315892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11918): Terminated: ok {rc=0}
11:03:07.398948 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11916): Process ended prematurely: osmo-stp_10.42.42.5(pid=11916) [trial-2388↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11916)]