Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 250 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10022): Process ended prematurely: osmo-stp_10.42.42.5(pid=10022) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10022)]

Standard Output

----------------------------------------------
trial-2388 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
10:40:00.054089 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.066287 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
10:40:00.232395 tst                        iperf3.py: using LAC 33374
10:40:00.354333 tst                        iperf3.py: using RAC 224
10:40:00.475863 tst                        iperf3.py: using CellId 33374
10:40:00.597938 tst                        iperf3.py: using BVCI 33375
10:40:00.621545 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.632396 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.643209 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.654038 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.664839 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.675666 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.686926 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.697805 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
10:40:00.708765 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
10:40:01.018797 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
10:40:01.167963 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:40:01.532445 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10014): Launched
10:40:01.831201 run iperf3-srv_10.42.42.10(pid=10015): Launched
10:40:02.022551 tst                      iperf3.py:8: start network...
10:40:02.153921 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:40:02.650526 run         create_hlr_db(pid=10016): Launched
10:40:02.826528 bus                          /gobi_6: Setting Powered False
10:40:03.847561 run         create_hlr_db(pid=10016): Terminated: ok {rc=0}
10:40:04.254968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10018): Launched
10:40:04.560219 run   osmo-hlr_10.42.42.2(pid=10019): Launched
10:40:04.671894 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:40:05.202668 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10021): Launched
10:40:05.508552 run   osmo-stp_10.42.42.5(pid=10022): Launched
10:40:05.619295 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:40:06.150578 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10024): Launched
10:40:06.258943 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:40:06.525504 run              patchelf(pid=10025): Launched
10:40:06.704279 run   osmo-stp_10.42.42.5(pid=10022): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10022)]
10:40:06.835290 run   osmo-stp_10.42.42.5(pid=10022): stdout: 
| (launched: 2022-12-13_10:40:05.358057)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:40:06.966530 run   osmo-stp_10.42.42.5(pid=10022): stderr: 
| �[0;m�[38;5;43m20221213104005525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213104005525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213104005526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213104005526 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213104005527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213104005527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213104005527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:40:07.092670 run   osmo-stp_10.42.42.5(pid=10022): stdout: 
| (launched: 2022-12-13_10:40:05.358057)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:40:07.217923 run   osmo-stp_10.42.42.5(pid=10022): stderr: 
| �[0;m�[38;5;43m20221213104005525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213104005525 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213104005526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213104005526 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213104005527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213104005527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213104005527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:40:07.363696 run              patchelf(pid=10025): Terminating (SIGINT)
10:40:07.535619 run              patchelf(pid=10025): Terminated: ok {rc=0}
10:40:07.566998 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10022): Process ended prematurely: osmo-stp_10.42.42.5(pid=10022) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10022)]  [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
10:40:07.576123 tst                      iperf3.py:8: Test FAILED (7.6 sec)
10:40:07.636139 run   osmo-hlr_10.42.42.2(pid=10019): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10019)]
10:40:07.685454 run   osmo-hlr_10.42.42.2(pid=10019): stdout: 
| (launched: 2022-12-13_10:40:04.410347) 
10:40:07.735276 run   osmo-hlr_10.42.42.2(pid=10019): stderr: 
| �[0;m�[1;31m20221213104004585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213104004585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213104004585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213104004585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213104004585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213104004586 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213104004598 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213104004607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213104004607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213104004607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:40:07.777815 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10014): Terminating (SIGTERM)
10:40:07.818378 run iperf3-srv_10.42.42.10(pid=10015): Terminating (SIGTERM)
10:40:07.858373 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10018): Terminating (SIGTERM)
10:40:07.898185 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10021): Terminating (SIGTERM)
10:40:07.938048 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10024): Terminating (SIGTERM)
10:40:07.947207 ---      ParallelTerminationStrategy: PID 10014 died...
10:40:08.000466 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10014): Terminated: ok {rc=0}
10:40:08.010495 ---      ParallelTerminationStrategy: PID 10015 died...
10:40:08.063589 run iperf3-srv_10.42.42.10(pid=10015): Terminated {rc=256}
10:40:08.073166 ---      ParallelTerminationStrategy: PID 10018 died...
10:40:08.126355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10018): Terminated: ok {rc=0}
10:40:08.135964 ---      ParallelTerminationStrategy: PID 10021 died...
10:40:08.189429 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10021): Terminated: ok {rc=0}
10:40:08.198928 ---      ParallelTerminationStrategy: PID 10024 died...
10:40:08.252312 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10024): Terminated: ok {rc=0}
10:40:08.342028 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10022): Process ended prematurely: osmo-stp_10.42.42.5(pid=10022) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10022)]