Skip to content

Failed

gprs:oc2g+mod-bts0-dynts-osmo.ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)

Failing for the past 252 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=25414): Process ended prematurely: osmo-stp_10.42.42.5(pid=25414) [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25414)]

Standard Output

----------------------------------------------
trial-2390 gprs:oc2g+mod-bts0-dynts-osmo ping.py
----------------------------------------------
13:18:40.311321 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:18:40.322904 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
13:18:40.467864 tst                          ping.py: using LAC 34205
13:18:40.587807 tst                          ping.py: using RAC 35
13:18:40.707308 tst                          ping.py: using CellId 34205
13:18:40.826537 tst                          ping.py: using BVCI 34206
13:18:40.849464 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:18:40.860319 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:18:40.871085 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:18:40.881827 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:18:40.892409 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:18:40.903476 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:18:40.914523 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:18:40.925325 tst    gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
13:18:41.200565 tst                       ping.py:19: start network...
13:18:41.325180 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:18:41.804850 run         create_hlr_db(pid=25408): Launched
13:18:41.978519 bus                          /gobi_6: Setting Powered False
13:18:42.998975 run         create_hlr_db(pid=25408): Terminated: ok {rc=0}
13:18:43.427926 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25410): Launched
13:18:43.751910 run   osmo-hlr_10.42.42.2(pid=25411): Launched
13:18:43.871777 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:18:44.440758 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25413): Launched
13:18:44.763401 run   osmo-stp_10.42.42.5(pid=25414): Launched
13:18:44.879125 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:18:45.439272 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25416): Launched
13:18:45.553508 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:18:45.844097 run              patchelf(pid=25417): Launched
13:18:46.053125 run   osmo-stp_10.42.42.5(pid=25414): ERR: Terminated: ERROR {rc=1}  [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25414)]
13:18:46.187091 run   osmo-stp_10.42.42.5(pid=25414): stdout: 
| (launched: 2022-12-13_13:18:44.604434)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:18:46.322938 run   osmo-stp_10.42.42.5(pid=25414): stderr: 
| �[0;m�[38;5;43m20221213131844793 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213131844793 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213131844794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213131844794 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213131844794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213131844794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213131844795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:18:46.452044 run   osmo-stp_10.42.42.5(pid=25414): stdout: 
| (launched: 2022-12-13_13:18:44.604434)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:18:46.580456 run   osmo-stp_10.42.42.5(pid=25414): stderr: 
| �[0;m�[38;5;43m20221213131844793 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213131844793 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213131844794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213131844794 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213131844794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213131844794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213131844795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:18:46.729476 run              patchelf(pid=25417): Terminating (SIGINT)
13:18:46.903131 run              patchelf(pid=25417): Terminated: ok {rc=0}
13:18:46.935201 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=25414): Process ended prematurely: osmo-stp_10.42.42.5(pid=25414) [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25414)]  [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22]
13:18:46.944589 tst                       ping.py:22: Test FAILED (6.6 sec)
13:18:47.006786 run   osmo-hlr_10.42.42.2(pid=25411): ERR: Terminated: ERROR {rc=237}  [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25411)]
13:18:47.057249 run   osmo-hlr_10.42.42.2(pid=25411): stdout: 
| (launched: 2022-12-13_13:18:43.592224) 
13:18:47.109119 run   osmo-hlr_10.42.42.2(pid=25411): stderr: 
| �[0;m�[1;31m20221213131843789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213131843789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213131843789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213131843789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213131843789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213131843789 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213131843802 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:oc2g+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213131843810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213131843810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213131843810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:18:47.152403 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25410): Terminating (SIGTERM)
13:18:47.195456 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25413): Terminating (SIGTERM)
13:18:47.237669 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25416): Terminating (SIGTERM)
13:18:47.246886 ---      ParallelTerminationStrategy: PID 25410 died...
13:18:47.300862 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25410): Terminated: ok {rc=0}
13:18:47.310542 ---      ParallelTerminationStrategy: PID 25413 died...
13:18:47.364150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25413): Terminated: ok {rc=0}
13:18:47.373812 ---      ParallelTerminationStrategy: PID 25416 died...
13:18:47.427300 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25416): Terminated: ok {rc=0}
13:18:47.511940 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25414): Process ended prematurely: osmo-stp_10.42.42.5(pid=25414) [trial-2390↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25414)]