Skip to content

Failed

gprs:sysmo+mod-bts0-egprs.ping.py (from gprs_sysmo+mod-bts0-egprs)

Failing for the past 60 builds (Since #2331 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=24718): Process ended prematurely: osmo-stp_10.42.42.5(pid=24718) [trial-2390↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24718)]

Standard Output

----------------------------------------------
trial-2390 gprs:sysmo+mod-bts0-egprs ping.py
----------------------------------------------
13:08:44.771413 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:08:44.783430 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1)
13:08:44.918871 tst                          ping.py: using LAC 34153
13:08:45.049353 tst                          ping.py: using RAC 238
13:08:45.179098 tst                          ping.py: using CellId 34153
13:08:45.313405 tst                          ping.py: using BVCI 34154
13:08:45.338682 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:08:45.350064 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:08:45.361328 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:08:45.372387 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:08:45.383763 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:08:45.395275 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:08:45.406997 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:08:45.418414 tst        gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4)
13:08:45.705116 tst                       ping.py:19: start network...
13:08:45.833585 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:08:46.371143 run         create_hlr_db(pid=24443): Launched
13:08:46.551853 bus                          /gobi_6: Setting Powered False
13:08:47.605616 run         create_hlr_db(pid=24443): Terminated: ok {rc=0}
13:08:48.088367 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24514): Launched
13:08:48.587904 run   osmo-hlr_10.42.42.2(pid=24560): Launched
13:08:48.839194 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:08:49.534581 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24688): Launched
13:08:49.987946 run   osmo-stp_10.42.42.5(pid=24718): Launched
13:08:50.240810 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:08:50.810226 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24721): Launched
13:08:50.932557 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:08:51.238746 run              patchelf(pid=24722): Launched
13:08:51.419008 run   osmo-stp_10.42.42.5(pid=24718): ERR: Terminated: ERROR {rc=1}  [trial-2390↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24718)]
13:08:51.550912 run   osmo-stp_10.42.42.5(pid=24718): stdout: 
| (launched: 2022-12-13_13:08:49.721595)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:08:51.685322 run   osmo-stp_10.42.42.5(pid=24718): stderr: 
| �[0;m�[38;5;43m20221213130849987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213130849987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213130849987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213130849988 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213130849988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213130849988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213130849988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:08:51.813254 run   osmo-stp_10.42.42.5(pid=24718): stdout: 
| (launched: 2022-12-13_13:08:49.721595)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:08:51.941272 run   osmo-stp_10.42.42.5(pid=24718): stderr: 
| �[0;m�[38;5;43m20221213130849987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213130849987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213130849987 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213130849988 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213130849988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213130849988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213130849988 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:08:52.095960 run              patchelf(pid=24722): Terminating (SIGINT)
13:08:52.269689 run              patchelf(pid=24722): Terminated: ok {rc=0}
13:08:52.301642 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24718): Process ended prematurely: osmo-stp_10.42.42.5(pid=24718) [trial-2390↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24718)]  [trial-2390↪gprs:sysmo+mod-bts0-egprs↪ping.py:22]
13:08:52.311068 tst                       ping.py:22: Test FAILED (7.5 sec)
13:08:52.372280 run   osmo-hlr_10.42.42.2(pid=24560): ERR: Terminated: ERROR {rc=237}  [trial-2390↪gprs:sysmo+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24560)]
13:08:52.422175 run   osmo-hlr_10.42.42.2(pid=24560): stdout: 
| (launched: 2022-12-13_13:08:48.283908) 
13:08:52.472797 run   osmo-hlr_10.42.42.2(pid=24560): stderr: 
| �[0;m�[1;31m20221213130848694 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213130848694 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213130848694 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213130848694 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213130848694 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213130848694 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213130848721 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:sysmo+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213130848738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213130848738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213130848738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:08:52.516031 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24514): Terminating (SIGTERM)
13:08:52.559050 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24688): Terminating (SIGTERM)
13:08:52.602179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24721): Terminating (SIGTERM)
13:08:52.612409 ---      ParallelTerminationStrategy: PID 24514 died...
13:08:52.669776 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24514): Terminated: ok {rc=0}
13:08:52.680113 ---      ParallelTerminationStrategy: PID 24688 died...
13:08:52.734833 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24688): Terminated: ok {rc=0}
13:08:52.744912 ---      ParallelTerminationStrategy: PID 24721 died...
13:08:52.800530 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24721): Terminated: ok {rc=0}
13:08:52.887827 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24718): Process ended prematurely: osmo-stp_10.42.42.5(pid=24718) [trial-2390↪gprs:sysmo+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24718)]