Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 252 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=26911): Process ended prematurely: osmo-stp_10.42.42.5(pid=26911) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26911)]

Standard Output

----------------------------------------------
trial-2390 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
13:35:44.169296 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.180823 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
13:35:44.343439 tst                        iperf3.py: using LAC 34296
13:35:44.469426 tst                        iperf3.py: using RAC 126
13:35:44.588262 tst                        iperf3.py: using CellId 34296
13:35:44.707760 tst                        iperf3.py: using BVCI 34297
13:35:44.731119 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.742488 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.753387 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.764062 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.774871 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.785641 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.796936 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.807752 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
13:35:44.818740 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
13:35:45.118915 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
13:35:45.256188 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
13:35:45.595034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26903): Launched
13:35:45.913258 run iperf3-srv_10.42.42.10(pid=26904): Launched
13:35:46.110178 tst                      iperf3.py:8: start network...
13:35:46.245447 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:35:46.783520 run         create_hlr_db(pid=26905): Launched
13:35:46.963448 bus                          /gobi_6: Setting Powered False
13:35:47.982245 run         create_hlr_db(pid=26905): Terminated: ok {rc=0}
13:35:48.417392 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26907): Launched
13:35:48.745098 run   osmo-hlr_10.42.42.2(pid=26908): Launched
13:35:48.866022 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:35:49.437738 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26910): Launched
13:35:49.764483 run   osmo-stp_10.42.42.5(pid=26911): Launched
13:35:49.883116 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:35:50.452890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26913): Launched
13:35:50.569958 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:35:50.856329 run              patchelf(pid=26914): Launched
13:35:51.047974 run   osmo-stp_10.42.42.5(pid=26911): ERR: Terminated: ERROR {rc=1}  [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26911)]
13:35:51.188555 run   osmo-stp_10.42.42.5(pid=26911): stdout: 
| (launched: 2022-12-13_13:35:49.604291)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:35:51.328776 run   osmo-stp_10.42.42.5(pid=26911): stderr: 
| �[0;m�[38;5;43m20221213133549794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213133549794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213133549795 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213133549795 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213133549796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213133549796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213133549796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:35:51.464582 run   osmo-stp_10.42.42.5(pid=26911): stdout: 
| (launched: 2022-12-13_13:35:49.604291)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:35:51.599384 run   osmo-stp_10.42.42.5(pid=26911): stderr: 
| �[0;m�[38;5;43m20221213133549794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213133549794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213133549795 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213133549795 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213133549796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213133549796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213133549796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:35:51.756413 run              patchelf(pid=26914): Terminating (SIGINT)
13:35:51.942731 run              patchelf(pid=26914): Terminated: ok {rc=0}
13:35:51.976232 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26911): Process ended prematurely: osmo-stp_10.42.42.5(pid=26911) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26911)]  [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
13:35:51.986293 tst                      iperf3.py:8: Test FAILED (7.8 sec)
13:35:52.049935 run   osmo-hlr_10.42.42.2(pid=26908): ERR: Terminated: ERROR {rc=237}  [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26908)]
13:35:52.101968 run   osmo-hlr_10.42.42.2(pid=26908): stdout: 
| (launched: 2022-12-13_13:35:48.584517) 
13:35:52.154470 run   osmo-hlr_10.42.42.2(pid=26908): stderr: 
| �[0;m�[1;31m20221213133548781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213133548781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213133548781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213133548781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213133548781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213133548781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213133548797 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213133548807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213133548807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213133548807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:35:52.199344 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26903): Terminating (SIGTERM)
13:35:52.241502 run iperf3-srv_10.42.42.10(pid=26904): Terminating (SIGTERM)
13:35:52.284287 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26907): Terminating (SIGTERM)
13:35:52.326750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26910): Terminating (SIGTERM)
13:35:52.369658 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26913): Terminating (SIGTERM)
13:35:52.379322 ---      ParallelTerminationStrategy: PID 26903 died...
13:35:52.436242 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26903): Terminated: ok {rc=0}
13:35:52.446400 ---      ParallelTerminationStrategy: PID 26904 died...
13:35:52.502863 run iperf3-srv_10.42.42.10(pid=26904): Terminated {rc=256}
13:35:52.512750 ---      ParallelTerminationStrategy: PID 26907 died...
13:35:52.569252 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26907): Terminated: ok {rc=0}
13:35:52.579599 ---      ParallelTerminationStrategy: PID 26910 died...
13:35:52.635709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26910): Terminated: ok {rc=0}
13:35:52.645771 ---      ParallelTerminationStrategy: PID 26913 died...
13:35:52.701849 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26913): Terminated: ok {rc=0}
13:35:52.789095 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26911): Process ended prematurely: osmo-stp_10.42.42.5(pid=26911) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26911)]