Skip to content

Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 252 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=27658): Process ended prematurely: osmo-stp_10.42.42.5(pid=27658) [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27658)]

Standard Output

----------------------------------------------
trial-2390 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
13:42:34.676997 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:42:34.688596 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
13:42:34.832544 tst                          ping.py: using LAC 34332
13:42:34.958786 tst                          ping.py: using RAC 162
13:42:35.080072 tst                          ping.py: using CellId 34332
13:42:35.198124 tst                          ping.py: using BVCI 34333
13:42:35.221657 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:42:35.232474 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:42:35.243242 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:42:35.253920 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:42:35.264404 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:42:35.274972 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:42:35.286177 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
13:42:35.297205 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
13:42:35.592303 tst                       ping.py:19: start network...
13:42:35.728183 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:42:36.239946 run         create_hlr_db(pid=27652): Launched
13:42:36.429847 bus                          /gobi_6: Setting Powered False
13:42:37.449725 run         create_hlr_db(pid=27652): Terminated: ok {rc=0}
13:42:37.858000 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27654): Launched
13:42:38.159709 run   osmo-hlr_10.42.42.2(pid=27655): Launched
13:42:38.274527 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:42:38.799816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27657): Launched
13:42:39.099962 run   osmo-stp_10.42.42.5(pid=27658): Launched
13:42:39.208614 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:42:39.734008 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27660): Launched
13:42:39.840426 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:42:40.105966 run              patchelf(pid=27661): Launched
13:42:40.282654 run   osmo-stp_10.42.42.5(pid=27658): ERR: Terminated: ERROR {rc=1}  [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27658)]
13:42:40.411872 run   osmo-stp_10.42.42.5(pid=27658): stdout: 
| (launched: 2022-12-13_13:42:38.952269)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:42:40.541426 run   osmo-stp_10.42.42.5(pid=27658): stderr: 
| �[0;m�[38;5;43m20221213134239121 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213134239121 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213134239121 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213134239121 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213134239122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213134239122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213134239122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:42:40.665710 run   osmo-stp_10.42.42.5(pid=27658): stdout: 
| (launched: 2022-12-13_13:42:38.952269)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:42:40.788382 run   osmo-stp_10.42.42.5(pid=27658): stderr: 
| �[0;m�[38;5;43m20221213134239121 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213134239121 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213134239121 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213134239121 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213134239122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213134239122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213134239122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:42:40.932555 run              patchelf(pid=27661): Terminating (SIGINT)
13:42:41.102474 run              patchelf(pid=27661): Terminated: ok {rc=0}
13:42:41.133308 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=27658): Process ended prematurely: osmo-stp_10.42.42.5(pid=27658) [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27658)]  [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
13:42:41.142012 tst                       ping.py:22: Test FAILED (6.5 sec)
13:42:41.202099 run   osmo-hlr_10.42.42.2(pid=27655): ERR: Terminated: ERROR {rc=237}  [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27655)]
13:42:41.250432 run   osmo-hlr_10.42.42.2(pid=27655): stdout: 
| (launched: 2022-12-13_13:42:38.011476) 
13:42:41.299435 run   osmo-hlr_10.42.42.2(pid=27655): stderr: 
| �[0;m�[1;31m20221213134238184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213134238184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213134238184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213134238184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213134238184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213134238184 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213134238196 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213134238204 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213134238205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213134238205 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:42:41.341523 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27654): Terminating (SIGTERM)
13:42:41.381263 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27657): Terminating (SIGTERM)
13:42:41.421018 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27660): Terminating (SIGTERM)
13:42:41.429961 ---      ParallelTerminationStrategy: PID 27654 died...
13:42:41.483249 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27654): Terminated: ok {rc=0}
13:42:41.492890 ---      ParallelTerminationStrategy: PID 27657 died...
13:42:41.545616 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27657): Terminated: ok {rc=0}
13:42:41.555177 ---      ParallelTerminationStrategy: PID 27660 died...
13:42:41.608059 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27660): Terminated: ok {rc=0}
13:42:41.690991 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27658): Process ended prematurely: osmo-stp_10.42.42.5(pid=27658) [trial-2390↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27658)]