Skip to content

Failed

gprs:trx-lms.ping_idle_ping.py (from gprs_trx-lms)

Failing for the past 72 builds (Since #2320 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=5885): Process ended prematurely: osmo-stp_10.42.42.5(pid=5885) [trial-2391↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5885)]

Standard Output

----------------------------------------------
trial-2391 gprs:trx-lms ping_idle_ping.py
----------------------------------------------
16:27:59.112747 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
16:27:59.124928 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
16:27:59.275719 tst                ping_idle_ping.py: using LAC 34836
16:27:59.405982 tst                ping_idle_ping.py: using RAC 156
16:27:59.536230 tst                ping_idle_ping.py: using CellId 34836
16:27:59.660521 tst                ping_idle_ping.py: using BVCI 34837
16:27:59.684094 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
16:27:59.694997 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
16:27:59.705684 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
16:27:59.716109 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
16:27:59.727079 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
16:27:59.737513 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
16:27:59.748868 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
16:27:59.759692 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
16:28:00.058264 tst             ping_idle_ping.py:24: start network...
16:28:00.195860 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:28:00.718369 run          create_hlr_db(pid=5879): Launched
16:28:00.931970 bus                          /gobi_6: Setting Powered False
16:28:01.924158 run          create_hlr_db(pid=5879): Terminated: ok {rc=0}
16:28:02.411752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5881): Launched
16:28:02.746525 run    osmo-hlr_10.42.42.2(pid=5882): Launched
16:28:02.868342 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:28:03.443672 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5884): Launched
16:28:03.775503 run    osmo-stp_10.42.42.5(pid=5885): Launched
16:28:03.895093 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:28:04.471457 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5887): Launched
16:28:04.588523 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:28:04.876181 run               patchelf(pid=5888): Launched
16:28:05.069065 run    osmo-stp_10.42.42.5(pid=5885): ERR: Terminated: ERROR {rc=1}  [trial-2391↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5885)]
16:28:05.210663 run    osmo-stp_10.42.42.5(pid=5885): stdout: 
| (launched: 2022-12-13_16:28:03.611381)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:28:05.352242 run    osmo-stp_10.42.42.5(pid=5885): stderr: 
| �[0;m�[38;5;43m20221213162803806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213162803806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213162803806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213162803807 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213162803807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213162803807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213162803807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:28:05.488557 run    osmo-stp_10.42.42.5(pid=5885): stdout: 
| (launched: 2022-12-13_16:28:03.611381)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:28:05.623504 run    osmo-stp_10.42.42.5(pid=5885): stderr: 
| �[0;m�[38;5;43m20221213162803806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213162803806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213162803806 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213162803807 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213162803807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213162803807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213162803807 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:28:05.781135 run               patchelf(pid=5888): Terminating (SIGINT)
16:28:05.965469 run               patchelf(pid=5888): Terminated: ok {rc=0}
16:28:05.999061 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=5885): Process ended prematurely: osmo-stp_10.42.42.5(pid=5885) [trial-2391↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5885)]  [trial-2391↪gprs:trx-lms↪ping_idle_ping.py:27]
16:28:06.008339 tst             ping_idle_ping.py:27: Test FAILED (6.9 sec)
16:28:06.072933 run    osmo-hlr_10.42.42.2(pid=5882): ERR: Terminated: ERROR {rc=237}  [trial-2391↪gprs:trx-lms↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5882)]
16:28:06.125549 run    osmo-hlr_10.42.42.2(pid=5882): stdout: 
| (launched: 2022-12-13_16:28:02.580279) 
16:28:06.178953 run    osmo-hlr_10.42.42.2(pid=5882): stderr: 
| �[0;m�[1;31m20221213162802778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213162802778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213162802778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213162802778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213162802778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213162802778 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213162802791 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-lms/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213162802799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213162802799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213162802799 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:28:06.224869 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5881): Terminating (SIGTERM)
16:28:06.268288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5884): Terminating (SIGTERM)
16:28:06.311498 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5887): Terminating (SIGTERM)
16:28:06.321588 ---      ParallelTerminationStrategy: PID 5881 died...
16:28:06.379274 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5881): Terminated: ok {rc=0}
16:28:06.390013 ---      ParallelTerminationStrategy: PID 5884 died...
16:28:06.447260 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5884): Terminated: ok {rc=0}
16:28:06.457779 ---      ParallelTerminationStrategy: PID 5887 died...
16:28:06.515708 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5887): Terminated: ok {rc=0}
16:28:06.604298 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5885): Process ended prematurely: osmo-stp_10.42.42.5(pid=5885) [trial-2391↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5885)]