Skip to content
[Jenkins]Jenkins
log in | sign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 254 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15937): Process ended prematurely: osmo-stp_10.42.42.5(pid=15937) [trial-2392↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15937)]

Standard Output

----------------------------------------------
trial-2392 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
18:16:27.307736 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.319997 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
18:16:27.480410 tst                        iperf3.py: using LAC 35384
18:16:27.610305 tst                        iperf3.py: using RAC 194
18:16:27.735429 tst                        iperf3.py: using CellId 35384
18:16:27.859110 tst                        iperf3.py: using BVCI 35385
18:16:27.882876 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.894202 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.905475 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.916548 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.927971 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.939454 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.951034 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.962529 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:16:27.974150 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
18:16:28.260117 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
18:16:28.388924 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
18:16:28.713524 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15929): Launched
18:16:28.984550 run iperf3-srv_10.42.42.10(pid=15930): Launched
18:16:29.173271 tst                      iperf3.py:8: start network...
18:16:29.302062 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:16:29.798560 run         create_hlr_db(pid=15931): Launched
18:16:29.976754 bus                          /gobi_6: Setting Powered False
18:16:31.033722 run         create_hlr_db(pid=15931): Terminated: ok {rc=0}
18:16:31.487273 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15933): Launched
18:16:31.897156 run   osmo-hlr_10.42.42.2(pid=15934): Launched
18:16:32.120486 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:16:32.745906 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15936): Launched
18:16:33.079864 run   osmo-stp_10.42.42.5(pid=15937): Launched
18:16:33.200232 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:16:33.780075 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15939): Launched
18:16:33.898126 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:16:34.191483 run              patchelf(pid=15940): Launched
18:16:34.386755 run   osmo-stp_10.42.42.5(pid=15937): ERR: Terminated: ERROR {rc=1}  [trial-2392↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15937)]
18:16:34.529877 run   osmo-stp_10.42.42.5(pid=15937): stdout: 
| (launched: 2022-12-13_18:16:32.914333)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:16:34.673105 run   osmo-stp_10.42.42.5(pid=15937): stderr: 
| �[0;m�[38;5;43m20221213181633106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213181633106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213181633106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213181633107 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213181633107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213181633107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213181633107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:16:34.810688 run   osmo-stp_10.42.42.5(pid=15937): stdout: 
| (launched: 2022-12-13_18:16:32.914333)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:16:34.947251 run   osmo-stp_10.42.42.5(pid=15937): stderr: 
| �[0;m�[38;5;43m20221213181633106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213181633106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213181633106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213181633107 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213181633107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213181633107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213181633107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:16:35.108154 run              patchelf(pid=15940): Terminating (SIGINT)
18:16:35.297545 run              patchelf(pid=15940): Terminated: ok {rc=0}
18:16:35.332237 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=15937): Process ended prematurely: osmo-stp_10.42.42.5(pid=15937) [trial-2392↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15937)]  [trial-2392↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
18:16:35.342264 tst                      iperf3.py:8: Test FAILED (8.1 sec)
18:16:35.406767 run   osmo-hlr_10.42.42.2(pid=15934): ERR: Terminated: ERROR {rc=237}  [trial-2392↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15934)]
18:16:35.459506 run   osmo-hlr_10.42.42.2(pid=15934): stdout: 
| (launched: 2022-12-13_18:16:31.647519) 
18:16:35.512842 run   osmo-hlr_10.42.42.2(pid=15934): stderr: 
| �[0;m�[1;31m20221213181631988 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213181631988 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213181631988 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213181631988 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213181631994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213181631994 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213181632014 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213181632026 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213181632027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213181632027 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:16:35.558387 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15929): Terminating (SIGTERM)
18:16:35.601193 run iperf3-srv_10.42.42.10(pid=15930): Terminating (SIGTERM)
18:16:35.643977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15933): Terminating (SIGTERM)
18:16:35.686524 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15936): Terminating (SIGTERM)
18:16:35.729319 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15939): Terminating (SIGTERM)
18:16:35.739160 ---      ParallelTerminationStrategy: PID 15929 died...
18:16:35.796934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15929): Terminated: ok {rc=0}
18:16:35.807276 ---      ParallelTerminationStrategy: PID 15930 died...
18:16:35.864218 run iperf3-srv_10.42.42.10(pid=15930): Terminated {rc=256}
18:16:35.874388 ---      ParallelTerminationStrategy: PID 15933 died...
18:16:35.931368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15933): Terminated: ok {rc=0}
18:16:35.941961 ---      ParallelTerminationStrategy: PID 15936 died...
18:16:35.999039 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15936): Terminated: ok {rc=0}
18:16:36.009335 ---      ParallelTerminationStrategy: PID 15939 died...
18:16:36.066615 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15939): Terminated: ok {rc=0}
18:16:36.156369 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15937): Process ended prematurely: osmo-stp_10.42.42.5(pid=15937) [trial-2392↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15937)]