Skip to content

Failed

gprs:sysmo+mod-bts0-dynts-ipa.ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)

Failing for the past 63 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=18880): Process ended prematurely: osmo-stp_10.42.42.5(pid=18880) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18880)]

Standard Output

----------------------------------------------
trial-2393 gprs:sysmo+mod-bts0-dynts-ipa ping.py
----------------------------------------------
18:47:07.837812 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:47:07.849786 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
18:47:08.005731 tst                          ping.py: using LAC 35541
18:47:08.132433 tst                          ping.py: using RAC 96
18:47:08.252252 tst                          ping.py: using CellId 35541
18:47:08.368651 tst                          ping.py: using BVCI 35542
18:47:08.391734 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:47:08.402950 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:47:08.413882 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:47:08.425016 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:47:08.435680 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:47:08.446449 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:47:08.457382 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
18:47:08.468049 tst    gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
18:47:08.759209 tst                       ping.py:19: start network...
18:47:08.894068 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:47:09.407039 run         create_hlr_db(pid=18874): Launched
18:47:09.581124 bus                          /gobi_6: Setting Powered False
18:47:10.602329 run         create_hlr_db(pid=18874): Terminated: ok {rc=0}
18:47:11.031670 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18876): Launched
18:47:11.356701 run   osmo-hlr_10.42.42.2(pid=18877): Launched
18:47:11.478066 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:47:12.048435 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18879): Launched
18:47:12.372669 run   osmo-stp_10.42.42.5(pid=18880): Launched
18:47:12.490076 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:47:13.053180 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18882): Launched
18:47:13.168100 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:47:13.448874 run              patchelf(pid=18883): Launched
18:47:13.637403 run   osmo-stp_10.42.42.5(pid=18880): ERR: Terminated: ERROR {rc=1}  [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18880)]
18:47:13.775361 run   osmo-stp_10.42.42.5(pid=18880): stdout: 
| (launched: 2022-12-13_18:47:12.212845)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:47:13.913574 run   osmo-stp_10.42.42.5(pid=18880): stderr: 
| �[0;m�[38;5;43m20221213184712404 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213184712405 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213184712405 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213184712405 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213184712406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213184712406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213184712406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:47:14.047132 run   osmo-stp_10.42.42.5(pid=18880): stdout: 
| (launched: 2022-12-13_18:47:12.212845)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:47:14.179627 run   osmo-stp_10.42.42.5(pid=18880): stderr: 
| �[0;m�[38;5;43m20221213184712404 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213184712405 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213184712405 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213184712405 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213184712406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213184712406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213184712406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:47:14.333708 run              patchelf(pid=18883): Terminating (SIGINT)
18:47:14.513691 run              patchelf(pid=18883): Terminated: ok {rc=0}
18:47:14.546170 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18880): Process ended prematurely: osmo-stp_10.42.42.5(pid=18880) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18880)]  [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22]
18:47:14.555407 tst                       ping.py:22: Test FAILED (6.7 sec)
18:47:14.619413 run   osmo-hlr_10.42.42.2(pid=18877): ERR: Terminated: ERROR {rc=237}  [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18877)]
18:47:14.671361 run   osmo-hlr_10.42.42.2(pid=18877): stdout: 
| (launched: 2022-12-13_18:47:11.195683) 
18:47:14.724059 run   osmo-hlr_10.42.42.2(pid=18877): stderr: 
| �[0;m�[1;31m20221213184711391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213184711391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213184711391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213184711391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213184711391 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213184711392 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213184711405 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213184711413 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213184711414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213184711414 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:47:14.769100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18876): Terminating (SIGTERM)
18:47:14.811928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18879): Terminating (SIGTERM)
18:47:14.854722 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18882): Terminating (SIGTERM)
18:47:14.864484 ---      ParallelTerminationStrategy: PID 18876 died...
18:47:14.921504 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18876): Terminated: ok {rc=0}
18:47:14.931557 ---      ParallelTerminationStrategy: PID 18879 died...
18:47:14.987979 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18879): Terminated: ok {rc=0}
18:47:14.997996 ---      ParallelTerminationStrategy: PID 18882 died...
18:47:15.054424 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18882): Terminated: ok {rc=0}
18:47:15.142257 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18880): Process ended prematurely: osmo-stp_10.42.42.5(pid=18880) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18880)]