Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 255 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=20421): Process ended prematurely: osmo-stp_10.42.42.5(pid=20421) [trial-2393↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20421)]

Standard Output

----------------------------------------------
trial-2393 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
19:05:09.965500 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:09.978185 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
19:05:10.131800 tst                        iperf3.py: using LAC 35637
19:05:10.256489 tst                        iperf3.py: using RAC 192
19:05:10.378908 tst                        iperf3.py: using CellId 35637
19:05:10.498865 tst                        iperf3.py: using BVCI 35638
19:05:10.522762 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:10.534446 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:10.545797 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:10.556912 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:10.568123 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:10.579203 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:10.590529 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:10.601568 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
19:05:10.612786 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
19:05:10.912563 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
19:05:11.050746 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
19:05:11.390811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20413): Launched
19:05:11.674382 run iperf3-srv_10.42.42.10(pid=20414): Launched
19:05:11.876784 tst                      iperf3.py:8: start network...
19:05:12.014564 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:05:12.532560 run         create_hlr_db(pid=20415): Launched
19:05:12.723056 bus                          /gobi_6: Setting Powered False
19:05:13.742950 run         create_hlr_db(pid=20415): Terminated: ok {rc=0}
19:05:14.181007 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20417): Launched
19:05:14.510912 run   osmo-hlr_10.42.42.2(pid=20418): Launched
19:05:14.629097 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:05:15.202551 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20420): Launched
19:05:15.532236 run   osmo-stp_10.42.42.5(pid=20421): Launched
19:05:15.651528 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:05:16.256249 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20423): Launched
19:05:16.378543 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:05:16.684028 run              patchelf(pid=20424): Launched
19:05:16.881865 run   osmo-stp_10.42.42.5(pid=20421): ERR: Terminated: ERROR {rc=1}  [trial-2393↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20421)]
19:05:17.026053 run   osmo-stp_10.42.42.5(pid=20421): stdout: 
| (launched: 2022-12-13_19:05:15.370636)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:05:17.170759 run   osmo-stp_10.42.42.5(pid=20421): stderr: 
| �[0;m�[38;5;43m20221213190515558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213190515558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213190515558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213190515559 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213190515559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213190515559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213190515559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:05:17.307673 run   osmo-stp_10.42.42.5(pid=20421): stdout: 
| (launched: 2022-12-13_19:05:15.370636)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:05:17.443682 run   osmo-stp_10.42.42.5(pid=20421): stderr: 
| �[0;m�[38;5;43m20221213190515558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213190515558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213190515558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213190515559 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213190515559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213190515559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213190515559 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:05:17.601618 run              patchelf(pid=20424): Terminating (SIGINT)
19:05:17.786644 run              patchelf(pid=20424): Terminated: ok {rc=0}
19:05:17.820473 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20421): Process ended prematurely: osmo-stp_10.42.42.5(pid=20421) [trial-2393↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20421)]  [trial-2393↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
19:05:17.830616 tst                      iperf3.py:8: Test FAILED (7.9 sec)
19:05:17.894896 run   osmo-hlr_10.42.42.2(pid=20418): ERR: Terminated: ERROR {rc=237}  [trial-2393↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20418)]
19:05:17.946869 run   osmo-hlr_10.42.42.2(pid=20418): stdout: 
| (launched: 2022-12-13_19:05:14.349394) 
19:05:17.999318 run   osmo-hlr_10.42.42.2(pid=20418): stderr: 
| �[0;m�[1;31m20221213190514544 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213190514544 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213190514544 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213190514544 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213190514544 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213190514544 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213190514556 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213190514565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213190514565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213190514565 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:05:18.044044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20413): Terminating (SIGTERM)
19:05:18.086631 run iperf3-srv_10.42.42.10(pid=20414): Terminating (SIGTERM)
19:05:18.128773 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20417): Terminating (SIGTERM)
19:05:18.170977 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20420): Terminating (SIGTERM)
19:05:18.213283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20423): Terminating (SIGTERM)
19:05:18.222955 ---      ParallelTerminationStrategy: PID 20413 died...
19:05:18.279819 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20413): Terminated: ok {rc=0}
19:05:18.289947 ---      ParallelTerminationStrategy: PID 20414 died...
19:05:18.346416 run iperf3-srv_10.42.42.10(pid=20414): Terminated {rc=256}
19:05:18.356448 ---      ParallelTerminationStrategy: PID 20417 died...
19:05:18.413016 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20417): Terminated: ok {rc=0}
19:05:18.423112 ---      ParallelTerminationStrategy: PID 20420 died...
19:05:18.479757 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20420): Terminated: ok {rc=0}
19:05:18.489913 ---      ParallelTerminationStrategy: PID 20423 died...
19:05:18.546730 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20423): Terminated: ok {rc=0}
19:05:18.637331 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20421): Process ended prematurely: osmo-stp_10.42.42.5(pid=20421) [trial-2393↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20421)]